How to convert 2 standard report??
Hi All,
i want to convert 2 stnadard report. i have no idea. plze give right sucession set by step
following the standrad report.
1: RMCB0100.
2: RM07DOCS
how to convert both report.
thanks regards
Ambrish
Hi All,
I am trying to link 2 reports to one report and get the data of only one report according to the main reports data.
I have 2 reports.
1: RMCB0100.
2: RM07DOCS
Received and payment reports contain the detailed data of the main report.
If I link the Received and payment reports to he main report through hyperlinks. and If I select one ID in main report the detailed report should be either received or payment report depending on the Type that particular ID has.
eg.
the main report has the following data
ID Amount Type
000234 36000 Received
000235 -64000 Payment
If I select 000234 then report should get linked to Received report and display received report data.
If I select 000235 then report should get linked to payment report and display payment report data.
plz give right sucession set by step
Thanks & Regards
Ambrish
Similar Messages
-
How to create a standard report that allows filtering?
Hi Guys and Gals,
Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
Allowing the user to specify the number of rows displayed would be peachy-keen too.
Thanks,
Kim
P.S. I'm running Apex 4.1 with Oracle 11g.Kim2012 wrote:
Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
>
So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
>
Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
More good advice: Re: Newbie question-how does the tabular form work? How to populate prim key? and—if based on decent database design—out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app. -
How to Enhance the Standard Report?
Hi All,
How to Enhance the Standard Report? :
When I am trying to execute the query called ZTIMES in the user group SQ01 it is navigating the screen to selection-screen with some inputs to be given here on the selection screen company code is mandatory as an input. The company code field is having the search help and it is fetching the values for the company code from table called PROJ Table (Project definition Table).But I want the company code should fetch the value from the PRPS Table ( Work break structure(WBS Element) Level).
Tables used are PROJ and PRPS.
The company code in PROJ is PROJ-VBUKR
In PRPS is PRPS-PBUKR
In the coding part related to that selection screen I have to replace PROJ-VBUKR with
PRPS-PBUKR.But it is standard report to enhance.
What is suggestible solution for this issue?
Thanks,
M RajuHi,
Since this is an ABAP Query, You can change the infoset query in SQ02 and establish the join linkages between PROJ and PRPS
Also on the selection screen of the Query make sure you provide company code from PRPS table and report output also from the same table reference.
Once you have modified the ABAP Query, activate and generate it so that it will internally regenerate the a standard program.
http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
ABAP Query (Sq01)Modification
Hope this helps
Regards,
Shiva -
How to search for standard reports in sd and mm
Hi All ,
Wish yoy Happy Pongal ,
Pls provide me the information regarding how to see the standard reports for sd and mm in abap ,its urgent pls
thanku all bye ...Hi,
The std programs are mention in these PDFs
SD
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
MM
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
Rgds,
Prakash -
How to Convert Oracle Apps Report into XML Publisher
Hi
How to Convert Oracle Apps Report into XML Publisher?
ThanksIn Brief :
Re: XML Publisher
In Details :
http://www.oracle.com/technology/products/xml-publisher/docs/XMLEBSRep.pdf -
How to convert an Interactive report to ALV report..please give a example..
Hi experts,
How to convert an interactive report to ALV report..plz suggest me an example...
thanks in advance,
Varsha.hi varsha,
chk this link.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid.htm
you will get good idea.
use this FM.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE'
I_callback_user_command = 'USER_COMMAND'
is_layout = gd_layout
it_fieldcat = fieldcatalog[] "create a field catlog.
i_save = 'X'
tables
t_outtab = it_tab "pass the final internal table.
exceptions
program_error = 1
others = 2.
Regards
Anver -
Want to convert Sap standard report s_alr_87012085 into alvgrid
i Want to convert Sap standard report s_alr_87012085 into alvgrid please help me.
REPORT RFKOPR00
MESSAGE-ID FR
LINE-SIZE 132
NO STANDARD PAGE HEADING.
TABLES: B0SG,
LFA1, "Daten auf Mandantenebene
LFB1, "Daten auf Buchungskreisebene
LFB5, "Mahndaten
LFC1, "Verkehrszahlen
LFC3, "Sonderumsätze
BSIK, "Offend Posten
BKPF,
BSEG,
BSEGA.
TABLES:
BHDGD,
T001,
T001S,
*T001S,
T074T,
T074U,
TBSL,
TBSLT,
TCURX,
ADRS,
RFPDO,
RFPDO1,
RFSDO,
FAEDE.
FIELD-SYMBOLS: .
*Hilfsfelder
*---Prüfung ob mehrere Hauswährungen verarbeitet werden.
DATA: CFAKT(3) TYPE P,
CHECKSALDO(8) TYPE P,
CHECKAGOBL(8) TYPE P,
WAERS LIKE T001-WAERS,
WFLAG(1) TYPE P VALUE '0',
WAERS2 LIKE T001-WAERS,
WFLAG2(1) TYPE P VALUE '0',
PH-LINE(132) TYPE C.
*---Ermittlung aktuelles Geschäftsjahr über Funktionsbaustein.
DATA: CURRY LIKE BSIK-GJAHR.
*-Ermittlung Zahlungseingang bei Zahlungen mit Skontoabzug--
*ATA: ZVTAGE LIKE KNB4-VZS01, "Verzugstage
ZVSKONTO(8) TYPE P, "Zahlungsvolumen bei Zahlung mit Skonto
ZVNETTO(8) TYPE P, "Zahlungsvolumen bei Nettozahlung
ZVVERZUG(8) TYPE P, "Verzugstage
ZVMALVZ(8) TYPE P, "Zahlungvolumen * Verzugstage
"KNB4-VZSxx)
ZVTYP(1) TYPE C, "Skonto oder Nettozahler
ZVPER(4) TYPE C. "Periode letze Zahlung
*---Zeilenanzahl fü Adressausgabe -
DATA: ZEILENANZAHL LIKE ADRS-ANZZL VALUE 7.
DATA: KSALDO(6) TYPE P. "Saldovortrag
BEABZUG(6) TYPE P, "Berechtigte Abzüge
UBABZUG(6) TYPE P, "Unberechtigte Abzüge
JAHRAUG(6) TYPE P, "Kumulierter Jahresausgleich
KUMZINS(6) TYPE P. "Kumulierter Zins
Ausgabe der Mahndaten pro Buchungskreis.
DATA: INDEX(2) TYPE P VALUE 0.
Hilfsfelder
DATA: HF(1) TYPE C.
DATA: TXT_1(78) TYPE C, "Mahnbereich
TXT_2(78) TYPE C, "Mahnart
TXT_3(78) TYPE C, "Mahnempfänger
TXT_4(78) TYPE C, "Mahndatum
TXT_5(78) TYPE C, "Mahnstufe
TXT_6(78) TYPE C, "Mahnsperre
TXT_7(78) TYPE C, "Mahnverfahren
TXT_8(78) TYPE C. "Sachbearbeiter
DATA: BEGIN OF XMAHN OCCURS 10.
INCLUDE STRUCTURE LFB5.
DATA: END OF XMAHN.
Hilfsfelder
DATA: CHAR1(1) TYPE C.
DATA: FLAG1(1) TYPE C.
DATA: INTENS(1) TYPE C.
DATA: FLAG2(1) TYPE C.
*---- K o n s t a n t e n -
*---- DNULL zum Vergleich mit Datumsfeldern -
DATA: DNULL(8) TYPE C VALUE '00000000'.
*---- DECKBLATT = 'N' ==> Kein Deckblatt bei NEW-SECTION -
DATA: DECKBLATT TYPE C VALUE 'N'.
*---- 'H' = Hilfsfelder, die jederzeit fuer Berechnungen ver- -
*---- wendet werden koennen. -
DATA: BEGIN OF H,
STICHTAG(8),
OFFSET(2) TYPE P,
OFFSE1(2) TYPE P,
SOLL LIKE LFC1-UM01S,
HABEN LIKE LFC1-UM01H,
SALDO LIKE LFC1-UMSAV,
SHBKZ LIKE LFC3-SHBKZ, "Sonderhauptbuchkennzeichen
SALDV LIKE LFC3-SALDV, "Sonderhauptbuch-Saldovortrag
SHBLS LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-Saldo
SHBSL LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-SOLL
SHBHB LIKE LFC3-HABNL, "Sonderhauptbuch-Lfd.-HABEN
GBNUM LIKE lfC1-GBN01, "Geschaeftsber. Nummer ECKERT
GBUMS LIKE lfC1-GBU01, "Geschaeftsber. Umsatz
TEXT(15),
UMLOW LIKE BSIK-UMSKZ, "Umsatzkennzeichen
UMHIG LIKE BSIK-UMSKZ, "Umsatzkennzeichen
END OF H.
---- 'C' = Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C,
SALDO TYPE P, "Saldo
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
END OF C.
---- 'C2'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C2 OCCURS 0,
BUKRS LIKE LFC1-BUKRS,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C2.
---- 'C3'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C3,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C3.
DATA: SHBETRAG LIKE BSEGA-DMSHB. "TYPE P.
*---- 'RTAB' = Rastertabelle fuer offene Posten -
DATA: BEGIN OF RTAB OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RTAB.
*---- 'RBUS' = Rastertabelle fuer Summen pro Sachbearbeiter -
*ATA: BEGIN OF RBUS OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUS.
*---- 'RBUK' = Rastertabelle fuer Summen pro Buchungskreis -
DATA: BEGIN OF RBUK OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUK.
---- 'RSUM' = Rastertabelle pro Währung über alle Buchungskreise ---
DATA: BEGIN OF RSUM OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesperrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RSUM.
*---- interne Tabelle für Periodenabgrenzung----
RANGES: BMONAT FOR RFPDO-DOPRBMON.
---- In die Felder RP01 bis RP05 werden dynamisch die von aussen ---
*---- eingegebenen Rasterpunkte uebertragen -
DATA: RP01(2) TYPE P, " 0
RP02(2) TYPE P, " 20
RP03(2) TYPE P, " 40
RP04(2) TYPE P, " 80
RP05(2) TYPE P, " 100
RP06(3) TYPE P, " 1
RP07(3) TYPE P, " 21
RP08(3) TYPE P, " 41
RP09(3) TYPE P, " 81
RP10(3) TYPE P. " 101
*---- In die Felder RC01 bis RC10 werden die Rasterpunkte in -
---- charakterform abgestellt. (fuer REPLACE-Funktion in Variabler -
*---- Ueberschrift) -
DATA: RC01(4) TYPE C, " 0
RC02(4) TYPE C, " 20
RC03(4) TYPE C, " 40
RC04(4) TYPE C, " 80
RC05(4) TYPE C, " 100
RC06(4) TYPE C, " 1
RC07(4) TYPE C, " 21
RC08(4) TYPE C, " 41
RC09(4) TYPE C, " 81
RC10(4) TYPE C. " 101
*---- Felder für Umsatzkennzeichen -
*---- für Ausweis der Sonderumsätze----
DATA: HUMKZ1 LIKE LFC3-SHBKZ,
HUMKZ2 LIKE LFC3-SHBKZ,
HUMKZ3 LIKE LFC3-SHBKZ,
HUMKZ4 LIKE LFC3-SHBKZ,
HUMKZ5 LIKE LFC3-SHBKZ,
HUMKZ6 LIKE LFC3-SHBKZ,
HUMKZ7 LIKE LFC3-SHBKZ,
HUMKZ8 LIKE LFC3-SHBKZ,
HUMKZ9 LIKE LFC3-SHBKZ,
HUMKZ10 LIKE LFC3-SHBKZ.
*---- GBZAEHL - In diesem Feld wird vermerkt, fuer wieviele Ge- -
*---- schaeftsbereiche ein OP-Raster ausgegeben wird. -
---- Wird das Raster nur fuer einen Geschaeftsbereich ge- -
*---- druckt, so entfaellt das Summen-Raster. -
DATA: GBZAEHL(3) TYPE P.
---- TOP-FLAG '1' = bei TOP-OF-PAGE Einzelpostenueberschrift ausg. --
*---- '2' = bei TOP-OF-PAGE Ueberschrift fuer Raster ausgeb. *
*---- '3' = bei TOP-OF-PAGE ULINE ausgeben. -
---- '4' = bei TOP-OF-PAGE Stammsatzueberschrift ausgeben --
DATA: TOP-FLAG(1) TYPE C.
*---- SEL-STAMM 'J' = Stammsatz wird ausgewertet *
*---- 'N' = Stammsatz wird nicht ausgewertet *
*---- SEL-POSTN 'J' = Stammsatz hat Posten gerastert *
*---- 'N' = Stammsatz hat keine Posten gerastert *
DATA: BEGIN OF SEL,
STAMM(1) TYPE C,
POSTN(1) TYPE C,
POST2(1) TYPE C,
END OF SEL.
*---- SATZART '1' = Stammdaten -
*---- '2' = Faelligkeitsraster -
*---- '3' = Einzelposten -
DATA: SATZART(1) TYPE C.
*---- RART = Erste ausgewaehlte Rasterart -
DATA: RART(1) TYPE C.
*---- TAGE = Tage nach denen die Posten sortiert sind -
DATA: TAGE(4) TYPE P,
*---- NTAGE = Tage fuer Netto-Faelligkeit -
NTAGE(4) TYPE P,
*---- STAGE = Tage fuer Skonto1-Faelligkeit -
STAGE(4) TYPE P,
*---- ATAGE = Alter der Belege -
ATAGE(4) TYPE P,
*---- UTAGE = Tage fuer Ueber-Faelligkeit -
UTAGE(4) TYPE P.
*---- RASTERUU dient zur Sortierung der Einzelposten. Die Posten -
*---- gemaess ihrer Rasterung die Werte '1' bis '6' -
DATA: RASTERUU(1) TYPE C.
*---- RAART Rasterart -
---- Die einzelnen Felder der Feldleiste werden bei SART-OF-SELECTION
*---- mit 1 oder 0 bestueckt. -
*ATA: BEGIN OF RAART,
NET(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
SKT(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
UEB(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
END OF RAART.
DATA: BEGIN OF GB,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
END OF GB.
*---- Variable Ueberschriften -
DATA: BEGIN OF VARUEB1,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB1.
DATA: BEGIN OF VARUEB2,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB2.
DATA: VARUEB3(132),
VARUEB4(132),
VARTXT1(40),
VARTXT(40) TYPE C.
*---- Variable für Ausgabe der Sonderumsätze----
DATA: SHBBEZ LIKE T074T-LTEXT.
DATA: ASUMS TYPE P. "
*---- Interne Tabelle für Bezeichnungen der SHBKZ----
DATA: BEGIN OF BEZSHB OCCURS 10,
SHBKZ LIKE T074T-SHBKZ,
LTEXT LIKE T074T-LTEXT,
END OF BEZSHB.
*---- Interne Tabelle für Zwischenspeicherung -
DATA: BEGIN OF BLKEY,
BUKRS LIKE BSIK-BUKRS,
BELNR LIKE BSIK-BELNR,
GJAHR LIKE BSIK-GJAHR,
BUZEI LIKE BSIK-BUZEI,
END OF BLKEY.
DATA: BEGIN OF RTAGE,
NTAGE LIKE NTAGE,
STAGE LIKE STAGE,
ATAGE LIKE ATAGE,
UTAGE LIKE UTAGE,
END OF RTAGE.
DATA: BEGIN OF HBSIK OCCURS 10.
INCLUDE STRUCTURE BSIK.
INCLUDE STRUCTURE BSEGA.
INCLUDE STRUCTURE RTAGE.
DATA: END OF HBSIK.
DATA: BEGIN OF REFBL OCCURS 10.
INCLUDE STRUCTURE BLKEY.
INCLUDE STRUCTURE RTAGE.
DATA: END OF REFBL.
DATA: BEGIN OF HLFB1 OCCURS 10.
INCLUDE STRUCTURE LFB1.
DATA: END OF HLFB1.
DATA: BEGIN OF HT001 OCCURS 10.
INCLUDE STRUCTURE T001.
DATA: END OF HT001.
*---- Interne Tabelle für Ausgabe der Obligos -
DATA: BEGIN OF AOBLIGO OCCURS 12,
OBART TYPE C, "Flag für Obligoart 1 = Kontokorrent
" 2 = SHBKZ
" 3 = sonstige SHB
SHBKZ LIKE T074T-SHBKZ, "SHB-Kennzeichen
LTEXT LIKE T074T-LTEXT, "Bezeichnung
OBLIG TYPE P, "Obligobetrag
END OF AOBLIGO.
*---- Declarationen für Accessibility /ALV GRID -
data: ACC_MODE type c.
Data: UEBTEXT(22) type c.
Data: UEKTEXT(15) type c.
Data: TITTEXT(100) type c.
Data: DATTEXT(10) type c.
DATA: BEGIN OF RTAB_ALV OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIk-BUKRS,
lifnr LIKE LFA1-lifnr,
busab like lfb1-busab,
SORTL LIKE lfA1-SORTL,
LAND1 LIKE lfA1-LAND1,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
hwaer like rf140-hwaer,
RAART like RF140-RAART, "Rasterart
shkzg like bsik-shkzg,
XGUTS TYPE C, "Gutschrift
KUMUM LIKE RF140-KUMUMHW, "Umsatz
ANZAH like rf140-anzbthw, "Anzahlungen
OPSUM like RF140-gsaldd, "Offene Posten Summe
RAST1 like RF140-rast1, "Rasterfeld 1
RAST2 like RF140-rast2, "Rasterfeld 2
RAST3 like RF140-rast3, "Rasterfeld 3
RAST4 like RF140-rast4, "Rasterfeld 4
RAST5 like RF140-rast5, "Rasterfeld 5
RAST6 like RF140-rast6, "Rasterfeld 6
END OF RTAB_ALV.
*"General Data
TYPE-POOLS: SLIS.
*DATA: BEGIN OF GT_OUTTAB OCCURS 0.
INCLUDE STRUCTURE rtab_alv.
*DATA: END OF GT_OUTTAB.
Data: GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_EXIT_CAUSED_BY_CALLER,
GS_EXIT_CAUSED_BY_USER TYPE SLIS_EXIT_BY_USER,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
*"Callback
*Data: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
G_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
Data: G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
G_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
G_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST'.
*"Variants
DATA: GS_VARIANT LIKE DISVARIANT,
G_SAVE.
Global structure of list
fieldcatalog
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
sort
*DATA: GT_SORT TYPE SLIS_T_SORTINFO_ALV.
events
*DATA: GT_EVENTS TYPE SLIS_T_EVENT.
*----- Structure for specific color settings -
*DATA: COL_TAB_T TYPE SLIS_T_SPECIALCOL_ALV,
COL_TAB TYPE SLIS_SPECIALCOL_ALV.
DATA: G_TABNAME TYPE SLIS_TABNAME VALUE 'RTAB_ALV'.
print
*DATA: GS_PRINT TYPE SLIS_PRINT_ALV.
*---- FIELD-GROUPS -
FIELD-GROUPS:
HEADER,
STAMMDATEN,
OP-RASTER,
EINZELPOSTEN.
INSERT
LFB1-BUKRS " Buchungskreis
lfB1-BUSAB " Sachbearbeiter
LFA1-LIFNR " Kontonummer
SATZART " Satzart
RTAB-SORTK " Sortkz fuer Tabelle RTAB
" '0' = normale Eintraege
" '1' = Summeneintraege
GB " Geschaeftsbereich
" - GB-GSBER
" - GB-WAERS
RASTERUU " Kennzeichen fuer Detailposten bzw Raster
ab hier nur fuer Einzelposten -
TAGE " Rastertage fuer Detailposten
BSIK-UMSKZ " Umsatzkennzeichen
BSIK-BLART " Belegart
BSIK-ZUONR " Zuordnungsnummer
BSIK-BELNR " Belegnummer
BSIK-BUZEI " Belegzeile
INTO HEADER.
INSERT
Addressdaten
ADRS-LINE0 " 1. Zeile Adressenaufbereitung
ADRS-LINE1 " 2. " "
ADRS-LINE2 " 3. " "
ADRS-LINE3 " 4. " "
ADRS-LINE4 " 5. " "
ADRS-LINE5 " 6. " "
ADRS-LINE6 " 7. " "
ADRS-LINE7 " 8. " "
ADRS-LINE8 " 9. " "
ADRS-LINE9 " 10." "
Umsatzdaten
C-KUMUM " Umsatz
C-BABZG " Berechtigt. Abzuege
C-UABZG " Unberechtigt. Abzuege
C-KZINS " Zinszahlungen
C-KUMAG " Kum. Jahresausgleich
Obligos
C-SALDO " Saldo ohne SHB-Vorgänge
C-UMKZ1 "SHBKZ 1
C-SUMS1 "Sonderumsatz 1
C-UMKZ2 "SHBKZ 2
C-SUMS2 "Sonderumsatz 2
C-UMKZ3 "SHBKZ 3
C-SUMS3 "Sonderumsatz 3
C-UMKZ4 "SHBKZ 4
C-SUMS4 "Sonderumsatz 4
C-UMKZ5 "SHBKZ 5
C-SUMS5 "Sonderumsatz 5
C-UMKZ6 "SHBKZ 6
C-SUMS6 "Sonderumsatz 6
C-UMKZ7 "SHBKZ 7
C-SUMS7 "Sonderumsatz 7
C-UMKZ8 "SHBKZ 8
C-SUMS8 "Sonderumsatz 8
C-UMKZ9 "SHBKZ 9
C-SUMS9 "Sonderumsatz 9
C-UMKZ10 "SHBKZ 10
C-SUMS10 "Sonderumsatz 10
C-SONOB " Sonst. Obligen
Limits
C-AGOBLI " Absolutes Gesamtobligo
Zahlungdaten
LFB1-ZTERM "Zahlungsbedingung
LFB1-ZAHLS "Sperrschlüssel für Zahlung
LFB1-ZWELS "Zahlwege
LFB1-XVERR "Zahlungsverrechnung
LFB1-WEBTR "Wechsellimit
LFB1-BUSAB " Sachbearbeiter
lfa1-sortl
lfa1-land1
INTO STAMMDATEN.
INSERT
RTAB-RAART "Rasterart
RTAB-SPERR "gesperrte Posten
RTAB-KUMUM "Umsatz
RTAB-ANZAH "Anzahlungen
RTAB-OPSUM "Offene Posten Summe
RTAB-RAST1 "Rasterfeld 1
RTAB-RAST2 "Rasterfeld 2
RTAB-RAST3 "Rasterfeld 3
RTAB-RAST4 "Rasterfeld 4
RTAB-RAST5 "Rasterfeld 5
RTAB-RAST6 "Rasterfeld 6
INTO OP-RASTER.
INSERT
BSIK-BUDAT " Buchungsdatum
BSIK-BLDAT " Belegdatum
BSIK-CPUDT " CPU-Datum
BKPF-USNAM " User-ID
BSIK-WAERS " Wahrungsschluessel
BSEGA-NETDT " Nettofaelligkeitsdatum
FAEDE-NETDT " Nettofaelligkeitsdatum
BSIK-ZFBDT " Zahlungsfristen-Basisdatum
BSIK-BSCHL " Buchungsschluessel
BSIK-ZLSCH " Zahlungsschluessel
BSIK-MANST " Mahnstufe
SHBETRAG " Hauswaehrungsbetrag
BSEGA-DMSHB " Hauswaehrungsbetrag
BSEGA-WRSHB " Fremwaehrungsbetrag
INTO EINZELPOSTEN.
BEGIN_OF_BLOCK 1.
*ELECT-OPTIONS:
GESBER FOR BSIK-GSBER.
PARAMETERS:
MONAT LIKE RFPDO-DOPRBMON.
SELECT-OPTIONS:
KKSALDO2 FOR RFSDO-KOPRSAL2, "Saldovortrag
AGOBLIG2 FOR RFSDO-KOPRAGO2. "Absolutes Obligo
RGOBLIGO FOR RFSDO-DOPRRGOB. "Relatives Obligo
SELECT-OPTIONS:
LAND FOR LFA1-LAND1,
KONTENGR FOR LFA1-KTOKK,
SACHBEAR FOR LFB1-BUSAB,
AKONTS FOR LFB1-AKONT,
AKONTP FOR BSIK-HKONT.
SELECT-OPTIONS:
BUDAT FOR BSIK-BUDAT,
BLDAT FOR BSIK-BLDAT,
NETDT FOR BSEGA-NETDT.
PARAMETERS: N_BELEGE LIKE RFPDO-BPETNBEL
DEFAULT 'X', "Normale Belege.
STAT_BLG LIKE RFPDO-BPETSBEL. "Statistische Belege
END_OF_BLOCK 1.
*ELECT-OPTIONS:
BERABZU1 FOR LFC1-BABZG,
UNBABZU1 FOR LFC1-UABZG,
ZINSE1 FOR LFC1-KZINS,
JHRAUSG1 FOR LFC1-KUMAG.
BERABZUG FOR BEABZUG NO-DISPLAY, "Berechtigter Abzug
UNBABZUG FOR UBABZUG NO-DISPLAY, "Unberechtigter Abzug
ZINSEN FOR KUMZINS NO-DISPLAY, "Kumulierter Zins
JHRAUSGL FOR JAHRAUG NO-DISPLAY. "Kumulierter Jahresausgl.
BEGIN_OF_BLOCK 2.
PARAMETERS:
SORTART LIKE RFPDO1-KOPRSOAR DEFAULT '1', "Doku
VERDICHT LIKE RFPDO1-KOPRVERD DEFAULT '1', "Doku
RASTVERD LIKE RFPDO1-KOPRRAST DEFAULT '0', "Doku
KONZVERS LIKE RFPDO-DOPOKONZ, "Konzernversion
XBUKRDAT LIKE RFPDO3-ALLGBUKD DEFAULT 0, "Bukr.daten
KAUSGABE like rfpdo3-ALLGKAOR.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-030.
PARAMETERS: RART-NET LIKE RFPDO-DOPRRNET DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(01) TEXT-028.
PARAMETERS: RART-SKT LIKE RFPDO-DOPRRSKT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(01) TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RART-ALT LIKE RFPDO1-KOPRRALT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 03(28) TEXT-031.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS RBLDAT LIKE RFPDO2-KORD10BD.
SELECTION-SCREEN COMMENT 61(12) TEXT-032.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 37(01) TEXT-028.
PARAMETERS: RART-UEB LIKE RFPDO-DOPRRUEB DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-026.
PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
SELECTION-SCREEN COMMENT 35(02) TEXT-027.
PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '020'.
SELECTION-SCREEN COMMENT 41(02) TEXT-027.
PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '040'.
SELECTION-SCREEN COMMENT 47(02) TEXT-027.
PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '080'.
SELECTION-SCREEN COMMENT 53(02) TEXT-027.
PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '100'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-029.
PARAMETERS: FAKTOR LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN COMMENT 35(1) TEXT-028.
PARAMETERS: STELLEN LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PZUOR LIKE RFPDO2-DOPRZUOR.
PARAMETERS: UMSATZKZ LIKE RFPDO1-DOPRSHBO. "DEFAULT 'WSABIMVD'.
PARAMETERS:
TITLE LIKE RFPDO1-ALLGLINE,
LISTSEP LIKE RFPDO-ALLGLSEP,
MIKFICHE LIKE RFPDO-ALLGMIKF.
PARAMETERS:
P_LVAR LIKE Gs_VARIANT-VARIANT DEFAULT SPACE modif id 508.
END_OF_BLOCK 2.
AT SELECTION-SCREEN OUTPUT.
if acc_mode is initial.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = '508'.
SCREEN-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
AT SELECTION-SCREEN ON AKONTS.
Konvertierung der Kontonummer
LOOP AT AKONTS.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-LOW AKONTS-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-HIGH AKONTS-HIGH.
MODIFY AKONTS.
ENDLOOP.
AT SELECTION-SCREEN ON AKONTP.
Konvertierung der Kontonummer
LOOP AT AKONTP.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-LOW AKONTP-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-HIGH AKONTP-HIGH.
MODIFY AKONTP.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LVAR.
Gs_VARIANT-REPORT = SY-REPID.
Gs_VARIANT-VARIANT = P_LVAR.
PERFORM F4_FOR_S_LVAR USING Gs_VARIANT.
P_LVAR = Gs_VARIANT-VARIANT.
AT SELECTION-SCREEN.
IF NOT RASTBIS5 IS INITIAL.
IF RASTBIS5 GT RASTBIS4
AND RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS4 IS INITIAL.
IF RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS3 IS INITIAL.
IF RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS2 IS INITIAL.
IF RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
nichts zu tun
ENDIF.
ENDIF.
END -
How to see all standard report in sap pm
hi
urgent
can somebody tail me
how to see all standard report in sap pmhi
manoj
youcan see all the reprts in sap
in trs SAP1
OF ALL MODULES
YOU REQUIRE ANY Ifurther information mailme back -
How to find available standard reports for SD module
hello folks,
can any one please guide me how to find the standard reports available for
the ssd modulehi cnu,
here r some steps to find the standard reports
goto SE81 and click on the corresponding application like sd
You will get the standard packages for SD with the programs available
Please check out this link
http://www.sap-img.com/financial/useful-reports-tcode-in-sap-financial-accounting.htm
or
Check this Transaction: SAP1
U will have reports based on the area.
or
Look at the table TADIR --> see only the programs, even you can look at based on the Development class wise
If you find it useful mark the points
~~Guduri -
How to convert one standard program to another standard program
Hi All,
i want to convert 2 stnadard report. i have no idea. plze give right sucession set by step
following the standrad report.
1: RMCB0100.
2: RM07DOCS
how to convert both report.
thanks regards
AmbrishDear Ambarish,
This is Sd Forum . it is no possible to covert one standard program into standard program. We can copy this into Zprogram if you need. This is a basic question . Please close the thread if it is answered.
Regards,
Madhu. -
Want to convert Sap standard report into alvgrid
HI PLEASE HELP THIS IS CODE BELOW OF SAP STANDARD REPORT CODE WANT TO CONVERT INTO ALVGRID
LEAS HELP
REPORT RFKOPR00
MESSAGE-ID FR
LINE-SIZE 132
NO STANDARD PAGE HEADING.
TABLES: B0SG,
LFA1, "Daten auf Mandantenebene
LFB1, "Daten auf Buchungskreisebene
LFB5, "Mahndaten
LFC1, "Verkehrszahlen
LFC3, "Sonderumsätze
BSIK, "Offend Posten
BKPF,
BSEG,
BSEGA.
TABLES:
BHDGD,
T001,
T001S,
*T001S,
T074T,
T074U,
TBSL,
TBSLT,
TCURX,
ADRS,
RFPDO,
RFPDO1,
RFSDO,
FAEDE.
FIELD-SYMBOLS: .
*Hilfsfelder
*---Prüfung ob mehrere Hauswährungen verarbeitet werden.
DATA: CFAKT(3) TYPE P,
CHECKSALDO(8) TYPE P,
CHECKAGOBL(8) TYPE P,
WAERS LIKE T001-WAERS,
WFLAG(1) TYPE P VALUE '0',
WAERS2 LIKE T001-WAERS,
WFLAG2(1) TYPE P VALUE '0',
PH-LINE(132) TYPE C.
*---Ermittlung aktuelles Geschäftsjahr über Funktionsbaustein.
DATA: CURRY LIKE BSIK-GJAHR.
*-Ermittlung Zahlungseingang bei Zahlungen mit Skontoabzug--
*ATA: ZVTAGE LIKE KNB4-VZS01, "Verzugstage
ZVSKONTO(8) TYPE P, "Zahlungsvolumen bei Zahlung mit Skonto
ZVNETTO(8) TYPE P, "Zahlungsvolumen bei Nettozahlung
ZVVERZUG(8) TYPE P, "Verzugstage
ZVMALVZ(8) TYPE P, "Zahlungvolumen * Verzugstage
"KNB4-VZSxx)
ZVTYP(1) TYPE C, "Skonto oder Nettozahler
ZVPER(4) TYPE C. "Periode letze Zahlung
*---Zeilenanzahl fü Adressausgabe -
DATA: ZEILENANZAHL LIKE ADRS-ANZZL VALUE 7.
DATA: KSALDO(6) TYPE P. "Saldovortrag
BEABZUG(6) TYPE P, "Berechtigte Abzüge
UBABZUG(6) TYPE P, "Unberechtigte Abzüge
JAHRAUG(6) TYPE P, "Kumulierter Jahresausgleich
KUMZINS(6) TYPE P. "Kumulierter Zins
Ausgabe der Mahndaten pro Buchungskreis.
DATA: INDEX(2) TYPE P VALUE 0.
Hilfsfelder
DATA: HF(1) TYPE C.
DATA: TXT_1(78) TYPE C, "Mahnbereich
TXT_2(78) TYPE C, "Mahnart
TXT_3(78) TYPE C, "Mahnempfänger
TXT_4(78) TYPE C, "Mahndatum
TXT_5(78) TYPE C, "Mahnstufe
TXT_6(78) TYPE C, "Mahnsperre
TXT_7(78) TYPE C, "Mahnverfahren
TXT_8(78) TYPE C. "Sachbearbeiter
DATA: BEGIN OF XMAHN OCCURS 10.
INCLUDE STRUCTURE LFB5.
DATA: END OF XMAHN.
Hilfsfelder
DATA: CHAR1(1) TYPE C.
DATA: FLAG1(1) TYPE C.
DATA: INTENS(1) TYPE C.
DATA: FLAG2(1) TYPE C.
*---- K o n s t a n t e n -
*---- DNULL zum Vergleich mit Datumsfeldern -
DATA: DNULL(8) TYPE C VALUE '00000000'.
*---- DECKBLATT = 'N' ==> Kein Deckblatt bei NEW-SECTION -
DATA: DECKBLATT TYPE C VALUE 'N'.
*---- 'H' = Hilfsfelder, die jederzeit fuer Berechnungen ver- -
*---- wendet werden koennen. -
DATA: BEGIN OF H,
STICHTAG(8),
OFFSET(2) TYPE P,
OFFSE1(2) TYPE P,
SOLL LIKE LFC1-UM01S,
HABEN LIKE LFC1-UM01H,
SALDO LIKE LFC1-UMSAV,
SHBKZ LIKE LFC3-SHBKZ, "Sonderhauptbuchkennzeichen
SALDV LIKE LFC3-SALDV, "Sonderhauptbuch-Saldovortrag
SHBLS LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-Saldo
SHBSL LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-SOLL
SHBHB LIKE LFC3-HABNL, "Sonderhauptbuch-Lfd.-HABEN
GBNUM LIKE lfC1-GBN01, "Geschaeftsber. Nummer ECKERT
GBUMS LIKE lfC1-GBU01, "Geschaeftsber. Umsatz
TEXT(15),
UMLOW LIKE BSIK-UMSKZ, "Umsatzkennzeichen
UMHIG LIKE BSIK-UMSKZ, "Umsatzkennzeichen
END OF H.
---- 'C' = Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C,
SALDO TYPE P, "Saldo
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
END OF C.
---- 'C2'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C2 OCCURS 0,
BUKRS LIKE LFC1-BUKRS,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C2.
---- 'C3'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C3,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C3.
DATA: SHBETRAG LIKE BSEGA-DMSHB. "TYPE P.
*---- 'RTAB' = Rastertabelle fuer offene Posten -
DATA: BEGIN OF RTAB OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RTAB.
*---- 'RBUS' = Rastertabelle fuer Summen pro Sachbearbeiter -
*ATA: BEGIN OF RBUS OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUS.
*---- 'RBUK' = Rastertabelle fuer Summen pro Buchungskreis -
DATA: BEGIN OF RBUK OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUK.
---- 'RSUM' = Rastertabelle pro Währung über alle Buchungskreise ---
DATA: BEGIN OF RSUM OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesperrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RSUM.
*---- interne Tabelle für Periodenabgrenzung----
RANGES: BMONAT FOR RFPDO-DOPRBMON.
---- In die Felder RP01 bis RP05 werden dynamisch die von aussen ---
*---- eingegebenen Rasterpunkte uebertragen -
DATA: RP01(2) TYPE P, " 0
RP02(2) TYPE P, " 20
RP03(2) TYPE P, " 40
RP04(2) TYPE P, " 80
RP05(2) TYPE P, " 100
RP06(3) TYPE P, " 1
RP07(3) TYPE P, " 21
RP08(3) TYPE P, " 41
RP09(3) TYPE P, " 81
RP10(3) TYPE P. " 101
*---- In die Felder RC01 bis RC10 werden die Rasterpunkte in -
---- charakterform abgestellt. (fuer REPLACE-Funktion in Variabler -
*---- Ueberschrift) -
DATA: RC01(4) TYPE C, " 0
RC02(4) TYPE C, " 20
RC03(4) TYPE C, " 40
RC04(4) TYPE C, " 80
RC05(4) TYPE C, " 100
RC06(4) TYPE C, " 1
RC07(4) TYPE C, " 21
RC08(4) TYPE C, " 41
RC09(4) TYPE C, " 81
RC10(4) TYPE C. " 101
*---- Felder für Umsatzkennzeichen -
*---- für Ausweis der Sonderumsätze----
DATA: HUMKZ1 LIKE LFC3-SHBKZ,
HUMKZ2 LIKE LFC3-SHBKZ,
HUMKZ3 LIKE LFC3-SHBKZ,
HUMKZ4 LIKE LFC3-SHBKZ,
HUMKZ5 LIKE LFC3-SHBKZ,
HUMKZ6 LIKE LFC3-SHBKZ,
HUMKZ7 LIKE LFC3-SHBKZ,
HUMKZ8 LIKE LFC3-SHBKZ,
HUMKZ9 LIKE LFC3-SHBKZ,
HUMKZ10 LIKE LFC3-SHBKZ.
*---- GBZAEHL - In diesem Feld wird vermerkt, fuer wieviele Ge- -
*---- schaeftsbereiche ein OP-Raster ausgegeben wird. -
---- Wird das Raster nur fuer einen Geschaeftsbereich ge- -
*---- druckt, so entfaellt das Summen-Raster. -
DATA: GBZAEHL(3) TYPE P.
---- TOP-FLAG '1' = bei TOP-OF-PAGE Einzelpostenueberschrift ausg. --
*---- '2' = bei TOP-OF-PAGE Ueberschrift fuer Raster ausgeb. *
*---- '3' = bei TOP-OF-PAGE ULINE ausgeben. -
---- '4' = bei TOP-OF-PAGE Stammsatzueberschrift ausgeben --
DATA: TOP-FLAG(1) TYPE C.
*---- SEL-STAMM 'J' = Stammsatz wird ausgewertet *
*---- 'N' = Stammsatz wird nicht ausgewertet *
*---- SEL-POSTN 'J' = Stammsatz hat Posten gerastert *
*---- 'N' = Stammsatz hat keine Posten gerastert *
DATA: BEGIN OF SEL,
STAMM(1) TYPE C,
POSTN(1) TYPE C,
POST2(1) TYPE C,
END OF SEL.
*---- SATZART '1' = Stammdaten -
*---- '2' = Faelligkeitsraster -
*---- '3' = Einzelposten -
DATA: SATZART(1) TYPE C.
*---- RART = Erste ausgewaehlte Rasterart -
DATA: RART(1) TYPE C.
*---- TAGE = Tage nach denen die Posten sortiert sind -
DATA: TAGE(4) TYPE P,
*---- NTAGE = Tage fuer Netto-Faelligkeit -
NTAGE(4) TYPE P,
*---- STAGE = Tage fuer Skonto1-Faelligkeit -
STAGE(4) TYPE P,
*---- ATAGE = Alter der Belege -
ATAGE(4) TYPE P,
*---- UTAGE = Tage fuer Ueber-Faelligkeit -
UTAGE(4) TYPE P.
*---- RASTERUU dient zur Sortierung der Einzelposten. Die Posten -
*---- gemaess ihrer Rasterung die Werte '1' bis '6' -
DATA: RASTERUU(1) TYPE C.
*---- RAART Rasterart -
---- Die einzelnen Felder der Feldleiste werden bei SART-OF-SELECTION
*---- mit 1 oder 0 bestueckt. -
*ATA: BEGIN OF RAART,
NET(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
SKT(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
UEB(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
END OF RAART.
DATA: BEGIN OF GB,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
END OF GB.
*---- Variable Ueberschriften -
DATA: BEGIN OF VARUEB1,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB1.
DATA: BEGIN OF VARUEB2,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB2.
DATA: VARUEB3(132),
VARUEB4(132),
VARTXT1(40),
VARTXT(40) TYPE C.
*---- Variable für Ausgabe der Sonderumsätze----
DATA: SHBBEZ LIKE T074T-LTEXT.
DATA: ASUMS TYPE P. "
*---- Interne Tabelle für Bezeichnungen der SHBKZ----
DATA: BEGIN OF BEZSHB OCCURS 10,
SHBKZ LIKE T074T-SHBKZ,
LTEXT LIKE T074T-LTEXT,
END OF BEZSHB.
*---- Interne Tabelle für Zwischenspeicherung -
DATA: BEGIN OF BLKEY,
BUKRS LIKE BSIK-BUKRS,
BELNR LIKE BSIK-BELNR,
GJAHR LIKE BSIK-GJAHR,
BUZEI LIKE BSIK-BUZEI,
END OF BLKEY.
DATA: BEGIN OF RTAGE,
NTAGE LIKE NTAGE,
STAGE LIKE STAGE,
ATAGE LIKE ATAGE,
UTAGE LIKE UTAGE,
END OF RTAGE.
DATA: BEGIN OF HBSIK OCCURS 10.
INCLUDE STRUCTURE BSIK.
INCLUDE STRUCTURE BSEGA.
INCLUDE STRUCTURE RTAGE.
DATA: END OF HBSIK.
DATA: BEGIN OF REFBL OCCURS 10.
INCLUDE STRUCTURE BLKEY.
INCLUDE STRUCTURE RTAGE.
DATA: END OF REFBL.
DATA: BEGIN OF HLFB1 OCCURS 10.
INCLUDE STRUCTURE LFB1.
DATA: END OF HLFB1.
DATA: BEGIN OF HT001 OCCURS 10.
INCLUDE STRUCTURE T001.
DATA: END OF HT001.
*---- Interne Tabelle für Ausgabe der Obligos -
DATA: BEGIN OF AOBLIGO OCCURS 12,
OBART TYPE C, "Flag für Obligoart 1 = Kontokorrent
" 2 = SHBKZ
" 3 = sonstige SHB
SHBKZ LIKE T074T-SHBKZ, "SHB-Kennzeichen
LTEXT LIKE T074T-LTEXT, "Bezeichnung
OBLIG TYPE P, "Obligobetrag
END OF AOBLIGO.
*---- Declarationen für Accessibility /ALV GRID -
data: ACC_MODE type c.
Data: UEBTEXT(22) type c.
Data: UEKTEXT(15) type c.
Data: TITTEXT(100) type c.
Data: DATTEXT(10) type c.
DATA: BEGIN OF RTAB_ALV OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIk-BUKRS,
lifnr LIKE LFA1-lifnr,
busab like lfb1-busab,
SORTL LIKE lfA1-SORTL,
LAND1 LIKE lfA1-LAND1,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
hwaer like rf140-hwaer,
RAART like RF140-RAART, "Rasterart
shkzg like bsik-shkzg,
XGUTS TYPE C, "Gutschrift
KUMUM LIKE RF140-KUMUMHW, "Umsatz
ANZAH like rf140-anzbthw, "Anzahlungen
OPSUM like RF140-gsaldd, "Offene Posten Summe
RAST1 like RF140-rast1, "Rasterfeld 1
RAST2 like RF140-rast2, "Rasterfeld 2
RAST3 like RF140-rast3, "Rasterfeld 3
RAST4 like RF140-rast4, "Rasterfeld 4
RAST5 like RF140-rast5, "Rasterfeld 5
RAST6 like RF140-rast6, "Rasterfeld 6
END OF RTAB_ALV.
*"General Data
TYPE-POOLS: SLIS.
*DATA: BEGIN OF GT_OUTTAB OCCURS 0.
INCLUDE STRUCTURE rtab_alv.
*DATA: END OF GT_OUTTAB.
Data: GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_EXIT_CAUSED_BY_CALLER,
GS_EXIT_CAUSED_BY_USER TYPE SLIS_EXIT_BY_USER,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
*"Callback
*Data: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
G_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
Data: G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
G_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
G_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST'.
*"Variants
DATA: GS_VARIANT LIKE DISVARIANT,
G_SAVE.
Global structure of list
fieldcatalog
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
sort
*DATA: GT_SORT TYPE SLIS_T_SORTINFO_ALV.
events
*DATA: GT_EVENTS TYPE SLIS_T_EVENT.
*----- Structure for specific color settings -
*DATA: COL_TAB_T TYPE SLIS_T_SPECIALCOL_ALV,
COL_TAB TYPE SLIS_SPECIALCOL_ALV.
DATA: G_TABNAME TYPE SLIS_TABNAME VALUE 'RTAB_ALV'.
print
*DATA: GS_PRINT TYPE SLIS_PRINT_ALV.
*---- FIELD-GROUPS -
FIELD-GROUPS:
HEADER,
STAMMDATEN,
OP-RASTER,
EINZELPOSTEN.
INSERT
LFB1-BUKRS " Buchungskreis
lfB1-BUSAB " Sachbearbeiter
LFA1-LIFNR " Kontonummer
SATZART " Satzart
RTAB-SORTK " Sortkz fuer Tabelle RTAB
" '0' = normale Eintraege
" '1' = Summeneintraege
GB " Geschaeftsbereich
" - GB-GSBER
" - GB-WAERS
RASTERUU " Kennzeichen fuer Detailposten bzw Raster
ab hier nur fuer Einzelposten -
TAGE " Rastertage fuer Detailposten
BSIK-UMSKZ " Umsatzkennzeichen
BSIK-BLART " Belegart
BSIK-ZUONR " Zuordnungsnummer
BSIK-BELNR " Belegnummer
BSIK-BUZEI " Belegzeile
INTO HEADER.
INSERT
Addressdaten
ADRS-LINE0 " 1. Zeile Adressenaufbereitung
ADRS-LINE1 " 2. " "
ADRS-LINE2 " 3. " "
ADRS-LINE3 " 4. " "
ADRS-LINE4 " 5. " "
ADRS-LINE5 " 6. " "
ADRS-LINE6 " 7. " "
ADRS-LINE7 " 8. " "
ADRS-LINE8 " 9. " "
ADRS-LINE9 " 10." "
Umsatzdaten
C-KUMUM " Umsatz
C-BABZG " Berechtigt. Abzuege
C-UABZG " Unberechtigt. Abzuege
C-KZINS " Zinszahlungen
C-KUMAG " Kum. Jahresausgleich
Obligos
C-SALDO " Saldo ohne SHB-Vorgänge
C-UMKZ1 "SHBKZ 1
C-SUMS1 "Sonderumsatz 1
C-UMKZ2 "SHBKZ 2
C-SUMS2 "Sonderumsatz 2
C-UMKZ3 "SHBKZ 3
C-SUMS3 "Sonderumsatz 3
C-UMKZ4 "SHBKZ 4
C-SUMS4 "Sonderumsatz 4
C-UMKZ5 "SHBKZ 5
C-SUMS5 "Sonderumsatz 5
C-UMKZ6 "SHBKZ 6
C-SUMS6 "Sonderumsatz 6
C-UMKZ7 "SHBKZ 7
C-SUMS7 "Sonderumsatz 7
C-UMKZ8 "SHBKZ 8
C-SUMS8 "Sonderumsatz 8
C-UMKZ9 "SHBKZ 9
C-SUMS9 "Sonderumsatz 9
C-UMKZ10 "SHBKZ 10
C-SUMS10 "Sonderumsatz 10
C-SONOB " Sonst. Obligen
Limits
C-AGOBLI " Absolutes Gesamtobligo
Zahlungdaten
LFB1-ZTERM "Zahlungsbedingung
LFB1-ZAHLS "Sperrschlüssel für Zahlung
LFB1-ZWELS "Zahlwege
LFB1-XVERR "Zahlungsverrechnung
LFB1-WEBTR "Wechsellimit
LFB1-BUSAB " Sachbearbeiter
lfa1-sortl
lfa1-land1
INTO STAMMDATEN.
INSERT
RTAB-RAART "Rasterart
RTAB-SPERR "gesperrte Posten
RTAB-KUMUM "Umsatz
RTAB-ANZAH "Anzahlungen
RTAB-OPSUM "Offene Posten Summe
RTAB-RAST1 "Rasterfeld 1
RTAB-RAST2 "Rasterfeld 2
RTAB-RAST3 "Rasterfeld 3
RTAB-RAST4 "Rasterfeld 4
RTAB-RAST5 "Rasterfeld 5
RTAB-RAST6 "Rasterfeld 6
INTO OP-RASTER.
INSERT
BSIK-BUDAT " Buchungsdatum
BSIK-BLDAT " Belegdatum
BSIK-CPUDT " CPU-Datum
BKPF-USNAM " User-ID
BSIK-WAERS " Wahrungsschluessel
BSEGA-NETDT " Nettofaelligkeitsdatum
FAEDE-NETDT " Nettofaelligkeitsdatum
BSIK-ZFBDT " Zahlungsfristen-Basisdatum
BSIK-BSCHL " Buchungsschluessel
BSIK-ZLSCH " Zahlungsschluessel
BSIK-MANST " Mahnstufe
SHBETRAG " Hauswaehrungsbetrag
BSEGA-DMSHB " Hauswaehrungsbetrag
BSEGA-WRSHB " Fremwaehrungsbetrag
INTO EINZELPOSTEN.
BEGIN_OF_BLOCK 1.
*ELECT-OPTIONS:
GESBER FOR BSIK-GSBER.
PARAMETERS:
MONAT LIKE RFPDO-DOPRBMON.
SELECT-OPTIONS:
KKSALDO2 FOR RFSDO-KOPRSAL2, "Saldovortrag
AGOBLIG2 FOR RFSDO-KOPRAGO2. "Absolutes Obligo
RGOBLIGO FOR RFSDO-DOPRRGOB. "Relatives Obligo
SELECT-OPTIONS:
LAND FOR LFA1-LAND1,
KONTENGR FOR LFA1-KTOKK,
SACHBEAR FOR LFB1-BUSAB,
AKONTS FOR LFB1-AKONT,
AKONTP FOR BSIK-HKONT.
SELECT-OPTIONS:
BUDAT FOR BSIK-BUDAT,
BLDAT FOR BSIK-BLDAT,
NETDT FOR BSEGA-NETDT.
PARAMETERS: N_BELEGE LIKE RFPDO-BPETNBEL
DEFAULT 'X', "Normale Belege.
STAT_BLG LIKE RFPDO-BPETSBEL. "Statistische Belege
END_OF_BLOCK 1.
*ELECT-OPTIONS:
BERABZU1 FOR LFC1-BABZG,
UNBABZU1 FOR LFC1-UABZG,
ZINSE1 FOR LFC1-KZINS,
JHRAUSG1 FOR LFC1-KUMAG.
BERABZUG FOR BEABZUG NO-DISPLAY, "Berechtigter Abzug
UNBABZUG FOR UBABZUG NO-DISPLAY, "Unberechtigter Abzug
ZINSEN FOR KUMZINS NO-DISPLAY, "Kumulierter Zins
JHRAUSGL FOR JAHRAUG NO-DISPLAY. "Kumulierter Jahresausgl.
BEGIN_OF_BLOCK 2.
PARAMETERS:
SORTART LIKE RFPDO1-KOPRSOAR DEFAULT '1', "Doku
VERDICHT LIKE RFPDO1-KOPRVERD DEFAULT '1', "Doku
RASTVERD LIKE RFPDO1-KOPRRAST DEFAULT '0', "Doku
KONZVERS LIKE RFPDO-DOPOKONZ, "Konzernversion
XBUKRDAT LIKE RFPDO3-ALLGBUKD DEFAULT 0, "Bukr.daten
KAUSGABE like rfpdo3-ALLGKAOR.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-030.
PARAMETERS: RART-NET LIKE RFPDO-DOPRRNET DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(01) TEXT-028.
PARAMETERS: RART-SKT LIKE RFPDO-DOPRRSKT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(01) TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RART-ALT LIKE RFPDO1-KOPRRALT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 03(28) TEXT-031.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS RBLDAT LIKE RFPDO2-KORD10BD.
SELECTION-SCREEN COMMENT 61(12) TEXT-032.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 37(01) TEXT-028.
PARAMETERS: RART-UEB LIKE RFPDO-DOPRRUEB DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-026.
PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
SELECTION-SCREEN COMMENT 35(02) TEXT-027.
PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '020'.
SELECTION-SCREEN COMMENT 41(02) TEXT-027.
PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '040'.
SELECTION-SCREEN COMMENT 47(02) TEXT-027.
PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '080'.
SELECTION-SCREEN COMMENT 53(02) TEXT-027.
PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '100'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-029.
PARAMETERS: FAKTOR LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN COMMENT 35(1) TEXT-028.
PARAMETERS: STELLEN LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PZUOR LIKE RFPDO2-DOPRZUOR.
PARAMETERS: UMSATZKZ LIKE RFPDO1-DOPRSHBO. "DEFAULT 'WSABIMVD'.
PARAMETERS:
TITLE LIKE RFPDO1-ALLGLINE,
LISTSEP LIKE RFPDO-ALLGLSEP,
MIKFICHE LIKE RFPDO-ALLGMIKF.
PARAMETERS:
P_LVAR LIKE Gs_VARIANT-VARIANT DEFAULT SPACE modif id 508.
END_OF_BLOCK 2.
AT SELECTION-SCREEN OUTPUT.
if acc_mode is initial.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = '508'.
SCREEN-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
AT SELECTION-SCREEN ON AKONTS.
Konvertierung der Kontonummer
LOOP AT AKONTS.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-LOW AKONTS-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-HIGH AKONTS-HIGH.
MODIFY AKONTS.
ENDLOOP.
AT SELECTION-SCREEN ON AKONTP.
Konvertierung der Kontonummer
LOOP AT AKONTP.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-LOW AKONTP-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-HIGH AKONTP-HIGH.
MODIFY AKONTP.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LVAR.
Gs_VARIANT-REPORT = SY-REPID.
Gs_VARIANT-VARIANT = P_LVAR.
PERFORM F4_FOR_S_LVAR USING Gs_VARIANT.
P_LVAR = Gs_VARIANT-VARIANT.
AT SELECTION-SCREEN.
IF NOT RASTBIS5 IS INITIAL.
IF RASTBIS5 GT RASTBIS4
AND RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS4 IS INITIAL.
IF RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS3 IS INITIAL.
IF RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS2 IS INITIAL.
IF RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
EHi Laxman,
I have checked the program and found out following:
the field "acc_mode" which gets populated by FM "GET_ACCESSIBILITY_MODE".
If this field is initial, then normal list gets displayed and
If this field has value, then ALV grid gets displayed.
regards,
Dharitree -
How to configrate purchasing standard reporting?
Hi, Experts
I want to add two important display fields (MARA-GROES, MARA-WRKST)into the standard sap report ME55.
I suppose below path can help me to solve this issue.
Materials Management>Purchasing>Reporting-->Maintain Purchase Requisition Lists
Anybody can tell me the how to do it ?Thank you for you reply, but ME55 is the t-code for release PR, not just a report.
So I don't think Query can help.
ofcourse , I know ABAP can do anything, if I develop a new report to release PR, which ofcourse can solve my problem. However I think SAP offer us the reporting function, which should can do somethings.
Who knows how to use the standard SAP reporting customizing ?
IMG>Materials Management>Purchasing-->Reporting -
How to convert SQL*Plus reports to SQLDeveloper?
Hello,
I installed Oracle 11g and found that SQLPLUSW.EXE was not there.
I have many scripts, reports, developed in SQLPLUS.
How can I convert my reports to run in SQL Developer and produce the same nice output?
It seems that SQLDev does not support columns formatting, TTITLE, BTITLE, BREAK, all the nice SQLPLUS stuff.
Any ideas other than installing Oracle10g and running good old SQLPLUS?
Thank you,
YGHi YG,
Based on your comments, you have either experimented a bit or read some forum posts like these:
Re: sqlplusw.exe not found
SQLPLUS commands in SQL Developer
Perhaps you could use the command line version of SQL*Plus (sqlplus.exe) which is still available in 11g and just spool the output?
Regards,
Gary Graham
SQLDeveloper Team -
How to check whether standard report or not
Hi,
can anyone help me how can u check whether the report is standard or not.if not how to genarate.
can u give steps............Hi,
U can See Standrd report In Metadata Repositary under Onfocube,
Query Name start with0 it is contant.
*******Asgin points if usefull***
Cheers
Satya -
How to convert the customized report sales price list into excel sheet
hi friends,
i am faceing the probulem in VK13 report is not conveting into excel sheet, then i developed the one customized report,
in this report i am using the tables are a506, konp,and makt, result is coming and it converted into excel sheet in my systam. when i was clik on the excel sheet icon it comming excel format it working fine and save it. But in menubar list>export> localfile and select redio button spredsheet this navigation only it print the three colums not coming the total colums,
same program test in another system it not converted into excel sheet, when i am click on excel sheet icon it's given the message is 'VIEW CAN NOT BE SWITCHED, PRODUCT NOT INSTALLED OR INTEGRATION NOT ACTIVE'. but i giving the print privew it giving the three colums only,.
In program i am using regular using reuse_alv_grid_display FM only.
sorry this qusition is repeted becuse before that one mising some text.
any one plz help me.
thanks
rajnice answer
Maybe you are looking for
-
Trying to import RAW files but receiving "some import operation were not performed" error message.
Trying to import RAW files (from Canon 5D Mark III) but I'm receiving the following error message "some import operations were not performed". I am trying to copy to my Seagate backup drive, however the only destination it will let me copy to is my L
-
Why can't Apple or Itunes make it easy to download music to a. cd
Why can't apple or Itunes make it simple and easy to download music-songs onto a cd. A few months ago I was able to do this what has happened in the meantime.David
-
Youtube or similar Video sites on N96
Hi, How do i view Youtube videos with N96, i tried accessing youtube as a webpage, and tried to access the videos, but it openes the whole page, and video doesnt open. i tried accessing with video center and doesnt work. is there another way to acces
-
Table for TDS sections and its description
Hi, Is there any table where both TDS section and its description is getting stored? If this is possible can we relate the same to Vendor through any link? Thanks & Regards, Tapan
-
I just updated to 10.6.3 using the System Update on my first-generation MacBook Pro. I'm now getting a kernel panic at startup, and cannot boot the system. Specifically, I'm seeing: panic(cpu 0 caller 0x2a96f6): "Version mis-match between Kernel and