[How-to] Convert a .dmg to .iso in 2 easy steps!

Searched in the forums and a few other places and got tired of solutions that didn't seem to work. No need to use perl, acetoneiso, or anything other than one trusty command-line app: poweriso.
Step 1.
pacman -S poweriso
Step 2.
poweriso convert /path/to/my/stupid.dmg -o /put/it/here.iso -ot iso
Done!

Luke.... Use the wiki.

Similar Messages

How to convert a .dmg to a .mov?

How do you convert a .dmg movie to .mov?

dogdays357 wrote:
How do you convert a .dmg movie to .mov?
Double click the .dmg and a icon will appear on the desktop like a drive, inside should be your files and if they are .mov files, then copy them to your Movie folder and double click on them to open them to view or import it into iMovie.
As you see now, the dmg is just a volume container, but based in software with no hardware, thus you can put other things in there and then dmg it up and send it off as one package.

How to convert a DMG file for a PC

I needed to download firefox 2.60 for my husband who has a microsoft operating system. So I went to Firefox and downloaded the file. The down load is saved as a DMG file on my desk top. I cannot drag it to "My Passport" as it it won't let me. Apparently the file needs to be converted from a DMG file to one he can use, and this is NOT something I have ever done on my mac. So confused. Hoping there is a simple solution as this is NOT how I want to spend my New Years Eve! Any help?
Thanks!

Allan,
Yes, we figured that out. We did down load an exe. file for Firefox 2.60 onto my desktop, but when we tried to drag that file to the My Passport back up it would not allow the process.
So maybe I should restate my question.... How do I down load Firefox 2.60 for Windows onto my iMac, so I can transfer the file onto the back up drive for my husband to download onto his PC?

How to convert MDF to an ISO

i have an MDF file that im trying to put on my PSP and i need it to be an ISO. what do i need to do to convert it?

i have an MDF file that im trying to put on my PSP
and i need it to be an ISO. what do i need to do to
convert it?
Your better off finding this information on a PSP forum like this one:
http://forums.afterdawn.com/thread_view.cfm/135246
I don't think you will get much feedback on this here.
Good luck!
William

How can I remove an old Email address in easy steps please

I have closed my AOL email account but cannot see a way of removing it from Thunderbird so keep getting the no access messages at start up. everything else is ok.

Easy when you know how!

How to Crash iMovie HD 6 in a few easy steps.

HOW TO CRASH iMOVIE HD (6.0)
{Make sure your mouse is set up for left/right button operation like on a PeeCee. It may not work otherwise}.
1. Record a short clip using the iSight camera. Record another.
2. <Left Click> on one of the clips.
3. Use <right Click> and select 'clear'.
(one clip disappears in a puff of smoke ...)
4. <left Click> on the other clip.
5. Use <right click> and select 'clear'.
(other clip disappears in a puff of smoke ...)
6. iMove hangs for a second and then shuts down.
(It also usually works with clips that exist already.)
Plse send off the bug report to Apple.

I have had the same experiences as everyone else on this fourm. Maybe that's why I never see a Apple Rep answer a question. I was working on a project all day and the application would just quit in the middle of me making an edit. I never had a chance to save my work when this happened.
It seems to me that over the past four years, apple has just deployed software without fully testing. I can't understand why they would use their paying customers as beta testers. The quality control aspect of Apple has gone away. You can't use iMovie on an iPod, but that's all they seem worried about these days. I am glad to see Adobe put out some good applications. Take Lightroom for example. This application was created to allow users to run the application on a Power Mac G4. What about that Apple?
I just wish Apple would own up to the problems it's cutomers are reportng and correct them or at least acknowledge them as being investigated. Wit would also seem reasonable for Apple to at least publish known issues.

How to Convert your DVD to any format at your will...

Long time ago, I hope I could take part in some classes to strengthen my health and my good figure. But due to my special job as a salesman, I don't have enough time to do that. So I bought one DVD of yoga, I hope I could do that through watching DVD. So I put DVD into my computer to be ready to practice, unfortunately all my players can't read them. I feel so upset. I tried to look for nearly all the ways I knew to deal with it, but nothing had happened. One of my friends introduce AiseesoftDVD Riper to me. I tried it, yes, it works. Now I could play yoga anytime and anywhere when I am free. It is benifit both for my health and my figure, I love this feelings. Now I hope I could help you through my experiences.
This guide aims to show you how to convert DVD to different video format both for windows/mac users.
Part 1: How to Convert DVD on Windows with AiseesoftBest DVD Ripper
Step 1: Load DVD
Put your DVD to your DVD Drive and click "Load DVD" button to add your DVD
Step 2: Choose Profile
Choose your output video profile from a drop-down list.
Step 3: Start Conversion win
Part 2: How to Convert DVD on Mac with AiseesoftDVD Ripper for Mac
Step 1: Load DVD
Click the "Load DVD" button, find the DVD folder of the movie you want to add from your DVD-ROM, and Click "Open".
Step 2: Choose output profile and settings
Selecting output format is really easy, you can chose your output format according to your devices players and the default setting works great.
For a veteran of digital player, you could customize your own settings by clicking "Settings" button to chose your own video resolution, frame rate, bit rate, encoder, etc.
Step 3: Start Conversion
What amazing softwares! I hope it is helped for all of you.

Hi,
source structure---------------------->target structure
x--------------------------------------->y
    sample------------------------------->root1
    a(1)------------------------------------->attribute1
    b(2)------------------------------------->attribute2
    c(3)------------------------------------->attribute3
        sample1(123)------------------------->element1
         a(1)-------------------------------->attribute1.1
         b(2)-------------------------------->attribute1.2
         c(3)-------------------------------->attribute1.3
Everything specified under target are elements.

I had photoshop 11, i now have elements 13. how do i get the photos from elements 11 to elements 13 in one easy step

I had elements 11 and I now have a new pc and elements 13. how do I get the photos from 11 ne easy step?

When you open the File menu, you should have 19 options, including 'Manage catalogs, Ctrl+Maj+C'.
All options should be available (not grayed out).
Using the 'Manage catalogs' option should open a new dialog.
In the white panel on the bottom you should find one or several catalogs found by the Organizer.
In the upper right part, two buttons : Open and Convert.
Click on 'Convert' which should open a new dialog allowing you to find the catalog to convert. The organizer should find most older catalogs in the list on the bottom. If you don't see your catalog to convert, you can tick the checkboxes to 'show previously converted catalogs' or to browse to their location.
Highlight the catalog to convert and click the convert button.
https://helpx.adobe.com/elements-organizer/using/creating-editing-catalogs.html#use_conver t_a_catalog_of_a_previous_vers…

Convert utf-8 to iso-8859-1

Hello,
sorry for my very bad english
i use httpxmlrequest to answer a database and show resultin a
div
the string means utf-8 encoded by my javascript fonction and,
of course,
no result are found in the database.
How can i convert the string to iso-8859-1 before request the
database ?
Thank if you have an idea
JiBé (France)

PaulH **AdobeCommunityExpert** a Ã©crit :
> JibÃ© wrote:
>> PaulH **AdobeCommunityExpert** a Ã©crit :
>> I work with a MS SQL server database encoding in
iso-8859-1
>
> data stored in plain text,char,varchar datatypes (ie not
"N")?
datatype of "titre" is varchar(250) and "contenu" is text
using the
> ODBC or JDBC (it would be listed as ms sql server in the
db drivers
> list) driver?
I think it's jdbc driver (case of my test computer)
>
>> The code :
>
> you're not following good i18n practices. while my
preference is for
> unicode ("just use unicode" has been my motto for
years), if you're
> really only ever going to use french & never need
the euro symbol then i
> guess iso-8859-1 (latin-1) is fine.
Here is a part of the content of my application.cfm
<cfprocessingdirective pageencoding="iso-8859-1">
<cfcontent type="text/html; charset=iso-8859-1">
<cfset setEncoding("URL", "iso-8859-1")>
<cfset setEncoding("Form", "iso-8859-1")>
>
> if you think you might need other languages, including
the euro symbol,
> then you should consider unicode. change your text
columsn to "N" type
> (nText, nChar, nVarChar) & swap the latin-1
encodings in the tags above
> to utf-8.
I'm going to test that....
JiBÃ©

How to convert encoding?

Hi guys,
How to convert the encoding of a file?
JDK includes the tool?
For example, a file is ISO8859-1 encoding, now I want to convert the encoding to UTF-8.
How to get it?
Thanks in advance!
a cup of Java, cheers!
Sha Jiang

1- Read the file using ISO-8859-1 and put it into a string:
You should use java.io.FileInputStream and java.io.InputStreamReader with charset name "ISO-8859-1". You could start with:BufferedReader br = new BufferedReader(new InputStreamReader(new FileInputStream("yourFilename"), "ISO8859-1"));2- Write this string into a new file using UTF-8 encoding:
You should use java.io.FileOutputStream and java.io.OutputStreamWriter with charset name "UTF-8". You could start with:BufferedWriter bw = new BufferedWriter(new OutputStreamWriter(new FileOutputStream("yourNewFilename"), "UTF-8"));3- Delete the first file.
Use java.io.File.
4- Rename the new file to the first file.
Also use java.io.File.
Regards

How to convert class file

Hi all, I am new in java card development.
This is my environment setting:
@echo off
set JC_HOME=C:\JavaCard\java_card_kit-2_2
set JAVA_HOME=C:\j2sdk14103
set PATH=.;%JC_HOME%\bin;%PATH%
I have created the Wallet applet according to 'Zhiqun Chen" text book and named it WalletApp.java.
I have compiled this file to a class file.
This is where is I saved my file
C:\JavaCard\java_card_kit-2_2\samples\src\com\sun\javacard\samples\WalletApp\WalletApp.java.
But I don't really understand how to convert the class file.
May I know what is this for?
-out EXP JCA CAP
-exportpath
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1
com.sun.javacard.samples.HelloWorld.HelloWorld
com.sun.javacard.samples.HelloWorld
0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
must save this in what file?
I tried to type in the command line below (and the result):
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sap
les\Wallet\Wallet.opt
error: file scr\com\sun\javacard\saples\Wallet\Wallet.opt could not be found
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
use file for all options and parameters to converter
Where options include:
-classdir <the root directory of the class hierarchy>
set the root directory where the Converter
will look for classes
-i support the 32-bit integer type
-exportpath <list of directories>
list the root directories where the Converter
will look for export files
-exportmap use the token mapping from the pre-defined export
file of the package being converted. The converter
will look for the export file in the exportpath
-applet <AID class_name>
set the applet AID and the class that defines the
install method for the applet
-d <the root directory for output>
-out [CAP] [EXP] [JCA]
tell the Converter to output the CAP file,
and/or the JCA file, and/or the export file
-V, -version print the Converter version string
-v, -verbose enable verbose output
-help print out this message
-nowarn instruct the Converter to not report warning messages
-mask indicate this package is for mask, so restrictions on
native methods are relaxed
-debug enable generation of debugging information
-nobanner suppress all standard output messages
-noverify turn off verification. Verification is default
*********************************************************May I know What is the correct command line to convert the class file and what must I do to before converting the class file?
I saw some article saying we must use JDK1.3, is it a must?
Your solution is highly appreciated.
Thank you!

Hi Ricardo,
I saved the file below as WalletApp.opt in the directory of scr\com\sun\javacard\samples\WalletApp
-out EXP JCA CAP
-exportpath c:\javacard\java_card_kit-2_2\api_export_files
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2:0x1 WalletApp.WalletApp
WalletApp 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2 1.0
But I still have the problem below:
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sam
ples\WalletApp\WalletApp.opt
error: file scr\com\sun\javacard\samples\WalletApp\WalletApp.opt could not be fo
und
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
May I know What's wrong with my command or file?
Where can I download JDK because what I can find is J2SDK.
Thank you!

How to convert string to 16 characters.

My external unique id is too long, more then 30 characters.
How to convert it to 30 characters using sql?

You should find another extranal system id in order to mantain uniqueness, but you could also use the name field (that supports 50 characters), but it deppends of which entity you are using.
Which is the entity? and...if the only way to insert data is by web services the you could use more than one field to verify uniqueness since you can query more than one field at the time.
Hope it helps
Kim.

How to convert Web app into a channel?

To whom it may concern,
Does anyone know how to convert a Web app into a channel inside the Portal server 6.0?
I developed the web app and tried to create a provider and a channel for it, but the Portal server did not recognize the WEB-INF folder and give me errors saying that it couldn't locate the class files.
I also have a problem with URL inside my jsp page (channel).
For example, I have two jsp pages:
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test1.jsp
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
and when I try to put a link from test1.jsp to test2.jsp using
... and make a channel based on test1.jsp. The channel will display the link as "http://mydomain/portal/test2.jsp" and result in "Error: page not found". I want the link to point to
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
To summarize my questions,
1) Where should the web app be located in the Portal server?
2) How to make a link inside one jsp page (channel) to point to another page inside the same folder?
Thank you in advance

Hello Karthik,
I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
Do you still have any other suggestions?
Thank you

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to convert data from a report in PDF which are specified on multiple lines ?

It often occurs that in a report one detail entry is folded onto two subsequent lines.
e.g.
No.
Container          Lt Ht Tp F/E     Dam          Weight Temp     Bi Im First Seal     No. Cell     Booking ref.
In Arr    id     A         Tml         PoL PD   PoD             C T L R F B
1       XXXU123456-7 20 ST I F                        24.000                                  SLX11            1    25A     CVA12345
How does the conversion to Excel is going to handle this ?
I need the second line of data in my excel sheet.
YES               9/10   14:15        BEANR   REFCT

Hello Jay,
Don't use SSIS to convert. Use SSIS to FTP the files out.
How you convert to PDF: the format is owned by Adobe so there might be royalties involved, but there are paid and free (OSS) libraries to doing so. Just search online.
Arthur
MyBlog
Twitter

[How-to] Convert a .dmg to .iso in 2 easy steps!

Similar Messages

Maybe you are looking for