How to convert a file from MS Publisher to illustrator

I am new to Adobe Cloud, I am not a designer. I need help or I will lose my job. This is serious, please!
I am finishing a small project that someone else started but has left our company. This person was designing tickets for a fundraiser but was using MS Publisher, the company uses Adobe Cloud. After reading and listening to these long drawn out exempts on tv.adobe.com no one has actually said, here' show you either import from publisher, or start over again with design, illustrator, phtoshop, etc.
The PDF file is messed not workable because on one page I have two images of the front of the ticket. I need two pages, one to show the front of the ticket, the other page to reflect the back of the ticket. There will be text boxes on both sides of the ticket.
All images are of stuff, faces, characters, etc.? How is a novice to figure this out when nothing actually shows how to design what I am trying to design. I am so frustrated I cannot stop crying!
Please help, please!

Thanks Mylenium.
It would be easier to complete this small project in Publisher but our office and my home office are all Mac/Apple. Publisher is nowhere in my life. Also the file emailed to me is this former's employee's work. She was designing tickets for an upcoming fundraiser and saved the front of the ticket but not a blank white text representing the back of of the ticket. Since I do not have both the front and back it has been difficult to create the full ticket. Mylenium, this is why I cannot edit the entire pdf in acrobat. I can and edit the front of the ticket, but part II is missing.
I've never used the design programs in Adobe which is why creating the same ticket using, let's say Ai,Design, Ps, Dw has been a challenge. However,
I refuse to be defeated and I'll get this under wrap today!!!

Similar Messages

How to convert raw files from new fujifilm x-t1 ?

how to convert raw files from new fujifilm x-t1 ?

The work around of converting the CR2 to dng either with the dng converter or ACR 6.7 will allow working in LR and CS5 but not with the latest raw conversion engine from Adobe i.e PV 2012.
Remember to keep a copy of the CR2 files if you wish to utilize the Canon software.

How to convert WMA files (from Windows Media Player) to play in iTunes

How do I convert WMA files (from Windows Media Player) to now play in iTunes?

Use Edit > Preferences > General tab > Import Settings to set your desired import format and bitrate. Note there is no point converting 128k wma into 320k mp3, you'll just get bigger files with no improvement in quality. Once you have set your import settings just drag & drop the files you want converted into iTunes.
tt2

How to convert a file from pdf to txt in java

hi,
in my project ,I want to convert a file from pdf to txt using java api. If anyone
have any idea about it plz help me.

Google has several ideas. :)

How to convert video file from mpg to 3g2?

I am using final cut express and I tried to add a few video files. The formats with 3g2 worked but the others that did not work were mpg. With the mpg files the actual video worked but the audio did not show up. I do not know how to convert them.. please help?!

Hello and welcome to the forum.
Where did this video come from? FCE uses QuickTime files with specific frame sizes/rates and codecs. You can convert many other types of files so they're FCE-compatible using utilities such as MPEG Streamclip (which is free).

How how take converted wma files from switch to i-tunes so i can burn cds

i play upright bass have converted wma files use ing switch file is presently on desk
top.
help
mr bass player

mr bass player wrote:
switch took my voice recorder which i use for upright bass teacher , and convert to mp3
drag converted mp3 files to i-tunes and then i can burn cds is that correct??
mr g
Correct. Dragging the MP3s into iTunes adds them to your iTunes library. Once they are in your library, you can add them to a playlist. When you have your playlist in the right sequence, click on File > Burn Playlist to Disc.

How to convert a file from 59.97 to 23.97 with Compressor?

Or another program that might work.
Thanks

Several ways, Here's one of them. I've clicked on the plus sign lower left in the Settings pane and from the drop-down selected Quick Time Movie. I've dragged that preset into the batch window after I've brought in my 59.94 fps source file.
In the Inspector>Video I select Frame Rate and Retiming Quality from the drop-downs – shown in these two screenshots.
Best of luck.
Russ

How to converting WMV files?

How to converting WMV files from PC to iPod playable files? thanks for all your help

I just found this tip on allexperts.com...
I'm on a windows box at work, so I cant verify the accuracy.
I have one at home...name escapes me right now...icon is a blue square with 5 black dots (like on a die). It converts audio formats, video formats, extracts audio from video, and will batch process.
Maybe someone will recognize the desciption and be able to name it.
=======
heres one on apples site:
http://www.apple.com/downloads/macosx/audio/switchfileformatconverterformac.html
=======
Tunes will convert wma to mp3 (or acc) format. Here are the instructions:
To convert a song's file format:
Choose iTunes > Preferences, then click the Advanced button at the top of the window and click Importing.
From the Import Using pop-up menu, choose the encoding format that you want to convert the song to, then click OK to save the settings.
Select one or more songs in your library, then choose Advanced > Convert Selection to MP3, Convert Selection to AAC, Convert Selection to Apple Lossless, Convert Selection to AIFF, or Convert Selection to WAV. (The menu item changes to show what's selected in your Importing preferences.)
To convert all the songs in a folder or on a disk, hold down the Option key and choose Advanced > "Convert Selection to," then choose the folder or disk containing the songs you want to convert. All the songs in the folder or on the disk will be converted except songs you purchased from the iTunes Store. (Purchased songs are encoded using a protected AAC format that prevents them from being converted.)

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
The answer depends on the type of video files you want to convert. If they are DRM protected commercial videos, no help can be given here. Google.

When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How can I solve this problem?

When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.

Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith.

How to convert Sequence file documentation from TXT or HTML to MS Word ?

Hello, I would like to modify a DocSupport.prj which in default generate only TXT or HTML to support MS Wors *.DOC. I have already change the dialog (add *.doc filter..), that was simple. But the major problem is how to convert the output from doc.c to some *.doc file. I found somewhere here Word9 ActiveX Instrument for CVI, but I don't understand, how the CVI gets informations about the steps etc. from *.seq file for another use. The original code in doc.c is quite hard to understand it quickly. Thanks for help.

Hi Pet007,
You should be able to just change the file it saves to's extension to .doc. You'll notice there is a define for txt, you could either change this to doc or if you still want to be able to use txt, create a new define and use this. If you do this you'll need to also add a define above (as you see it defines an integer for each different format type and uses those throughout the program as well). That should give you a good starting point for modifying this code. Unfortunately it is quite extensive to actually accomplish this, or else I could give a step by step guide, but it is rather long. But you should be able to get it working from this. The reason this should work is because Microsoft Word (.doc) files understand plain text just like .txt files. However, if you want to add formatting (fonts, bold text, etc) you would need to use the ActiveX Instrument for CVI which just access the ActiveX server from Microsoft. For more information about ActiveX in CVI visit the following link.
Using LabWindows/CVI as an ActiveX Automation Controller to Control Automation ServersAlso, this link gives an example of using Excel with CVI through ActiveX, which may give you some useful information about doing this type of thing.
Embed Excel ActiveX Documents on a CVI PanelFor more information on using Word's ActiveX Server, check out the following Microsoft Portal.
Word Developer Portal
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

HT204433 can i take my converted epub file from pubit! on my PC and publish it to ibook?

Can I take my converted epub file--from pubit! on my PC--and publish it to iBooks from my PC?

Thank you. I was just wondering if i could do it myself. I have since converter my novel to ePub
format and have it in my itunes book library and on my iPhone. All text and the cover look great, so I had hoped I could upload to apple on my own.

How can i open file from adobe reader..i already have adobe read

how can i open file from adobe reader..i already have adobe reader installed and cannot open a
file and i cannot convert my file into pdf..

Is the file really a PDF? Where is it? Have you tried opening it from within Reader?

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank you

So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

How to convert a file from MS Publisher to illustrator

Similar Messages

Maybe you are looking for