How to convert a PrE 3.0 project to PrE 9.0

I have some old videos that were done in Premiere Elements 3.0 and I wish to edit them. I have PrE 9.0 on my current computer, but it won't even open the old version. Any help would be appreciated.
Rick

Rick
Thanks for the reply.
There may be hope for Premiere Elements 3. Are you working with an Internet connection? If so, MPEG2 activation should be going through automatically, with maybe a flash on/off of a message about MPEG2 activation taking place. With Internet connection OK, uninstall Premiere Elements 3, do a free ccleaner run through (regular and registry parts), and then install 3.0 with antivirus and firewall(s) disabled. Once 3 is installed, then be sure to install the 3.0.2 Update. Have you been there and done all that?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3565
Have we determined if you have a good QuickTime install on your computer with these programs? Please verify that by determining if you see QuickTime presets for Share/Computer/QuickTime or however that exists for 3.0/3.0.2. Be sure to be running the programs as administrator. In addition, right click the desktop icon for 3.0/3.0.2, select and apply Run As Administrator.
We will be watching for your progress.
Thanks.
ATR

Similar Messages

How to convert keystore (from native android project) to .p12 to use with AIR project?

Due to the advancements with adobe AIR, I'm really excited to be finishing up a HUGE update of an old project that was originally made with native android.
But, i've hit a brick wall with 2 issues, and it would be terrible if all the work i've done in AIR was for nothing...
First, how do I convert the keystore I previously used (from native android project) to .p12 to use with AIR project? (on a mac)
Second, how do I remove the "air." that gets automatically appended onto the front my android package name? I plan to use a captive runtime, so it's not really needed at all, and I can't upload it like this as an update because it will think it's a different app.
Please help so I can continue using air for all my projects from now on!

Thanks for the reply!
So I'm going through this guide..
http://helpx.adobe.com/air/kb/opt-out-air-application-analytics.html
I followed all the steps, made all the adjustments to the androidmanifest.xml like it asks.
But when i get to the stap that says
"Run the following command to create the resource file for the updated AndroidManifest.xml:"
I run this..
    "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platform-tools/aapt" package -f -M AndroidManifest.xml -F resources.arsc -I "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platforms/android-8/android.jar" -S ./res
But I keep getting the same error
    ./res/layout/expandable_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/expandable_multiple_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/main.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/multiple_file_selection_panel.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/ssl_certificate_warning.xml:1: error: Error parsing XML: not well-formed (invalid token)
The guide doesn't say anything about these xml files, and im not sure what to do with these ore how to handle them.
If i go into the res/layout folder, and just delete these (i know theyre for my layout and i need them, but im just saying i deleted them for the sake of a test)
I was able to get through the rest of the steps in the guide fine, make an apk, and put it on my phone...only to find out the app will crash the moment you try to run it.
So my question is, does anyone with any experience re-packaging an android application know how I might get around this or take care of the errors with the xml files in the layout folder?
Thanks!!
EDIT to note something i've tried:
So, earlier in the guide they have me use thing thing called the "AXMLPrinter2.jar" to make the AndroidManifest.xml readable so i can edit it.
I run something like this:
    java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" AndroidManifest.xml > AndroidManifest.xml.bk
This makes a new file "AndroidManifest.xml.bk" and i can edit that.
So, I was thinking with all of these layout xml files, maybe I could run this "AXMLPrinter2.jar" on them and then edit them. Because right now if you open them they're not human readable, and its hard for me to work on them if they're not...
But when i do the same command I did on the AndroidManifest.xml i just get blank files...
I tried
    java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" main.xml > main.xml.bk
Just get a blank file.
So, i think the issue might be with these just not being re-formatted to human readable.

How to convert an NWDI project into a Local project?

Hi Experts,
Please tell me " how to convert an NWDI project into a Local project? "
If you c

Hi Srini
1. Copy/Paste Webdynpro components in the new project as was suggested before
2. Or create new project, copy _comp folder from old project to the new one. But, do not forget to update .dcdef & .project files manually after this. You have to set the correct project name in .dcdef and set the correct local project path in .project.
BR, Sergei

When I convert a trailer to a project and add content, how can I get the music track to repeat longer

Hey fellow Apple Geniuses - I just got the latest iMovie11 so excited for the new trailer feature, only to discover that these teenie weenie movie trailers are not near long enough for my taste, however I do like the cool transitions and layouts, so I discovered that I can convert the trailer to a project and then add more content, which I am doing right now. I need help though with the audio track... Does anyone know the secret to getting the 43 second music track to repeat, since this particular track (Friendship2) is not showing as an option in my iTunes/iMovie licensed audio to be able to keep dragging more into the movie? Thanks a million!

Hey Tom - Thanks a million truly! Just did what you said and it worked so smoothly! Totally cool! This was the last piece to finish the movie. I appreciate and value your quick response! Happy camper here!

How to convert all old (pre-Office 2007) documents in portal to new (Office Open XML, Office 2007+) formats?

Good day.
We have create a single SharePoint 2013 farm and manually copied in it all documents from old SharePoint 2007 server portal.
The question is how to automate covertation from old document format to new office in all librarys?
"Word Automation Services" able to convert only Word's documents, not Excel.
The single method what I think, is to use bulk convert utility ofc.exe from Microsoft Office Migration Planning Manager with powershell's ability to get all items from all librarys from site collection.
Can someone has faced with it and has a ready work example?

Hi,
According to your description, my understanding is that you want to convert all office file to the latest 2007 format.
We found this tool called MS Office Migration Planning Manager:
http://www.microsoft.com/downloads/details.aspx?FamilyID=13580cd7-a8bc-40ef-8281-dd2c325a5a81&DisplayLang=en#filelist
After extracting it, going to the Tools folder and modified the ofc.ini file to specify which folder to scan and convert etc.
Then running the ofc.exe and except some files didn't convert successfully, others is ok.
https://technet.microsoft.com/en-us/library/cc179019(v=office.14).aspx
Besides, Here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/office/en-US/8c571ca4-8ef6-496e-950a-6a608d44a070/how-to-convert-all-office-file-to-the-latest-2007-format?forum=ITCG
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to convert existing Flex project for iPhone?

Hi guys, I have a serious problem here with creating iPhone apps in Flash. I have created an app for the iPhone completely using Flex components long before CS5 came out. I've been looking for tutorials but with no luck. My issue is that I am not very sure how to convert the app to be used on iPhone.
As I've read the forums, some of you suggested compiling using command line. I guess that would be awesome. However, would it work if I'm using Flex framework? I've already tried to import my .SWF in Flash using loader.load() and add the mx.* component using addChild(VideoExample) I need just some solution that would save me days of searching and rewriting code, but any solution will be good. I have started a similar thread in Flash but if I get any answers here I will delete it.
Please respond, help would be very much appreciated!
Here's my mxml wrapper, from which I start the main application:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" applicationComplete="EntryPoint.main()">
</mx:Application>
Then I have a class which creates the main container:
package {
import mx.core.*;
public class EntryPoint {
    public static function main():void {
        var client:VideoExample = new VideoExample();
        var mxmlApp:Application = Application(Application.application);
        mxmlApp.addChild(client);
Here is the main class VideoExample:
package {
import mx.controls.*;
import mx.containers.*;
public class VideoExample extends Canvas {
    public function VideoExample() {
        super();
        init();
        private function init():void {
        loadImage();
        loadText();
                loadDisplay();
                startConnection();

I'm so sorry, I'm not really familiar with the codes.

How to convert class file

Hi all, I am new in java card development.
This is my environment setting:
@echo off
set JC_HOME=C:\JavaCard\java_card_kit-2_2
set JAVA_HOME=C:\j2sdk14103
set PATH=.;%JC_HOME%\bin;%PATH%
I have created the Wallet applet according to 'Zhiqun Chen" text book and named it WalletApp.java.
I have compiled this file to a class file.
This is where is I saved my file
C:\JavaCard\java_card_kit-2_2\samples\src\com\sun\javacard\samples\WalletApp\WalletApp.java.
But I don't really understand how to convert the class file.
May I know what is this for?
-out EXP JCA CAP
-exportpath
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1
com.sun.javacard.samples.HelloWorld.HelloWorld
com.sun.javacard.samples.HelloWorld
0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
must save this in what file?
I tried to type in the command line below (and the result):
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sap
les\Wallet\Wallet.opt
error: file scr\com\sun\javacard\saples\Wallet\Wallet.opt could not be found
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
use file for all options and parameters to converter
Where options include:
-classdir <the root directory of the class hierarchy>
set the root directory where the Converter
will look for classes
-i support the 32-bit integer type
-exportpath <list of directories>
list the root directories where the Converter
will look for export files
-exportmap use the token mapping from the pre-defined export
file of the package being converted. The converter
will look for the export file in the exportpath
-applet <AID class_name>
set the applet AID and the class that defines the
install method for the applet
-d <the root directory for output>
-out [CAP] [EXP] [JCA]
tell the Converter to output the CAP file,
and/or the JCA file, and/or the export file
-V, -version print the Converter version string
-v, -verbose enable verbose output
-help print out this message
-nowarn instruct the Converter to not report warning messages
-mask indicate this package is for mask, so restrictions on
native methods are relaxed
-debug enable generation of debugging information
-nobanner suppress all standard output messages
-noverify turn off verification. Verification is default
*********************************************************May I know What is the correct command line to convert the class file and what must I do to before converting the class file?
I saw some article saying we must use JDK1.3, is it a must?
Your solution is highly appreciated.
Thank you!

Hi Ricardo,
I saved the file below as WalletApp.opt in the directory of scr\com\sun\javacard\samples\WalletApp
-out EXP JCA CAP
-exportpath c:\javacard\java_card_kit-2_2\api_export_files
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2:0x1 WalletApp.WalletApp
WalletApp 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2 1.0
But I still have the problem below:
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sam
ples\WalletApp\WalletApp.opt
error: file scr\com\sun\javacard\samples\WalletApp\WalletApp.opt could not be fo
und
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
May I know What's wrong with my command or file?
Where can I download JDK because what I can find is J2SDK.
Thank you!

How Can I Run A SQLJ Normal Project In SAP NWDS

I have a question about SQLJ in SAP NWDS.
1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
2.I created a java normal project including the above java dictionary project.
3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
4.I coded the normal project,and export the project .jar,everything is ok.
<b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
Exception in thread "main"</b>
How Can I Run A SQLJ Normal Project In SAP NWDS?
PLS Help me and don't let me alone!

Tony,
Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
Chill out!!!
Sukanta Rudra
Note: If helpful, plz donate some points.

Very Urgent--- How to Convert Non Valuated stk into Valuated

Dear GURU'S
Actually for a material A when i see the stock in MM03 in accounting tab i see less stock then when i see in MMBE
i.e in MMBE if i select Material A and Plant B(Which is depo in my case) i see stock as 39
but for same material MAterial A and Plant B ,if i see in MM03 --in accounting tab i m able to see less stock i.e only 1
============================================
Well the problem is In MM03 I cud see only valuated stk i.e qty as 1
And in MMBE for a partiocular material for a particular plant the stock was 39
i.e Here i am getting Valuated + Non valuated stock
i.e i am getting difference of 25
=====>>>
To get into the root cause
I have gone to MB5B where i can get all the transaction that has been done on this material with movement type also i got the intial stock ,Goods recpt ,Goods issu and total stock
No for a particular material
In MB5B it is showing
Stock on 01.01.2005    = 38
receipts total               = 238
Issues total                  =237
Stock as on 18.02.2008 = 39(which is equal to Stock in MMBE)
=============>This is for valuated +Non valuated stock
Where as if i want to see only valuated stock it was showing
receipts total      = 238
Issues total         =237
Stock as on 18.02.2008 =1 (which is equal to stock in acctg view in MM03)
====================>This is only for Valuated Stock
======================================
Now how to solve this :
The initial qty(38) which has been posted it was at the begining that is at the start of the project
And the people who have posted it ,it was non valuated
that is the reason it is showing difference in MM03 and MMBE
First thing
How can i see on which date this initial stock has been posted
Second Query
How to convert this non valuated stock into Valuated stock
So that the quantity in MMBE and MM03 gets matched
Willl award 10 Points if my problem gets solved
THANKZ IN ADVANCE
REgds
Shailesh

Dear friend
Actuallly i have checked the history of that particular Item in MB51
I have gone through all the documents created for this material
Now this material also exist in DEPO which is located at chennai and plant is at mumbai
So Initially in the year-2006(31-10-2006) whater documents are created i.e STOP has been created and delivery has been made (Mov type-601)
are non valuated stock ,means they have been posted without any valuation
But from year 2007(01.02.2007) the documents whiohc have been posted are valuated
i.e is the reason when i am executing transaction MRN9 to check the history of valuated stock
I cant see non valuated stock
Well now how to do the valuation of this stock which have been posted in year 2006 so that
In MMBE and MM03 there is no difference of stock
Plz hepl
regds
shailesh

HOW TO CONVERT PDF FILE IN TO XML FILE?

HOW TO CONVERT PDF FILE IN TO XML FILE

No Office programs can open a pdf and edit the contents so you will have to get a different app to convert teh pdf into xls format. There are plenty to be found on the web.
Rod Gill
The one and only Project VBA Book
Rod Gill Project Management

How to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format

Hi All,
I have a requirement in my project like to convert the date time from one format to another.my situation is like to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format. I am using the soa suite 11.1.1.6.
Can any one suggest me how to convert in the BPEL transformation.
Thanks,
Sanju.

Hi Sanju,
Store the date to be converted into a variable viz. dateVar. Now, process an expression in assign as: xp20:format-dateTime($dateVar,'[Y0001]-[M01]-[D01] [h]:[m01]:[s01]').
Regards

How do I embed fonts into Captivate projects?

This question came up in May 2006 but was never really
answered. I'd like to know how to embed fonts into my Captivate
projects so that the output looks the same on all computers. While
the text animations are fine, the Text Caption fields are the ones
that seem to have fonts that go walkies on other computers. I know
you can embed fonts in PDFs. Why not in Captivate (unless I'm
missing something in 2.0).

First, a tip for the forums: If you use the URL tags, your
post won't require horizontal scrolling - sorry, but I use Firefox
and entering a long URL totally blows my ability to smoothly read
the post ... you can manually add a text link by using the "L" tag
as shown below (I've put spaces in to avoid this being turned into
another text link)
[ L = Your Text]
http://www.yourdomain.com [ /
L ]
Back to your issue, Charinos. I'm glad you did find the URL,
but that thread and your problem are not even in the same world.
That thread deals with fonts in text-entry boxes (boxes for
end-user text-entry), and you are talking about text-captions, an
entirely different object.
In fact, if you make changes and save those changes to a
text-caption, then publish the project, the fonts in your text
captions will remain stable and are not dependent on the fonts
installed on the end-viewer's machine. The reason is that when the
SWF is compiled, the text captions are converted to images and so
long as the file is viewed as intended in the HTML document - at
the proper size - the stretching you describe cannot take place.
I'm not saying you are seeing things, but if my understandings of
the Captivate machine are correct, what you are saying is happening
cannot
be happening. Something else is going on, like a failure to
save changes, use of non-conforming text-caption boxes with a
resultant loss of margins, or something.
Sorry I'm not more help. I can't duplicate what you are
seeing but I hope someone else can help you out - I may still be
misunderstanding your issue.

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

How to convert FCP subtitles created in Text to EXPORT as one .stl file for broadcaster

I created about 300 subtitles in Text, one version for English and one for German, that included narration and on-screen dialog, for a one-hour film I produced. An exported QT file creates a burned-in subtitle. However, the European distributor wants the film without subtitles and wants the subtitles as a .stl file (with the TimeCode for start and end of each subtitle text), one for English and one for German. I can create a QT file without subtitles. But I could not find a way to convert the FCP text into a file.
a. In FCP, I see no option to export to create an .stl file. How does one go about making the .stl file?
b. Some software I found like Subtitle Extractor creates an .stl file from an existing track in DVDSP's subtitle tracks, like S1 or S2, etc. I also see no such option in DVDSP to export to create an .stl file. Does this mean I would need to re-write all the subtitles in FCP into DVDSP? This means re-writing over 600 subtitles from FCP to DVDSP! This will take months. Any faster and effective solution? DVDSP is a solution only if this Subtitle Extractor software works! Any feedback on this? I tried to run a quick test in DVDSP but no .stl file was created and it resulted in an error.
c. I need to identify which subtitles are narration, and indentify the person speaking the dialog for the .stl file. Do I do this on the stl file or FCP (assuming there is a way to convert the FCP work)?
Using FCP 7.0.3, Mac OSX 10.6.8, 3.06 GHz Intel Core 2 Duo, 4GB Mhz, 500 GB drive

I've worked with title exchange pro and I thought it was great. The software author was very helpful when I had a probllem. I used it in a different way (converting a pre existing stl file into a subtitle track in fcp - a series of text clips with the appropriate timings and placement that I could copy into a sequence - to proof subtitles created by a service before using for a digital cinema print), but I'm pretty sure it'll do what you want.
http://www.spherico.com/filmtools/TitleExchange/

HOW TO CONVERT A XML FILE TO HTML FILE FORMAT IN WINDOWS APPLICATION

Hi iam a fresher iam working on a project in that i should convert the data in xml file to html file. I dont have any idea regarding this can anyone help me how to convert the xml file to a html file format. I just written the code till how to read the xml
file. Now i stucked how to write the code for converting to html format.
Thanks and Regards,
Dileep.

Hi iam a fresher iam working on a project in that i should convert the data in xml file to html file. I dont have any idea regarding this can anyone help me how to convert the xml file to a html file format. I just written the code till how to read the xml
file. Now i stucked how to write the code for converting to html format.
Thanks and Regards,
Dileep.
Hello,
For converting xml file to html, we could refer to the way shared in the following thread which uses an XSLT stylesheet to transform the XML into another format using the
XslTransform class.
http://www.codeproject.com/Articles/12047/How-to-Convert-XML-Files-to-HTML
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to convert a PrE 3.0 project to PrE 9.0

Similar Messages

Maybe you are looking for