How to convert a whole dvd (not seperate chapters)

hi there .i use hand brake to rip dvd since i guess videora doesn´t work with mac.but handbrake wouldn´t convert dvd as a whole file.is there any free programs to convert a whole dvd as one file with the wished subtitles.thanx in advance

thanx for encourgagement. i did some ripping but it was more like episodes of series like south park n stuff that u can choose in a dvd.but in hand brake u r supposed to choose the longest episode to convert the all dvd but it would only convert the chapter u choose..

Similar Messages

How to convert video and dvd for iPod

1. Download, install and run PQ DVD to iPod Video Converter. It can convert from DVD, Tivo, DivX, MPEG, WMV, AVI, RealMedia and many more to iPod Video.
(PQ DVD to iPod Video Converter Download)
2. Click "Open ..." button and choose a video file or DVD disc to open. Wait for the movie to start playing in the preview window.
3. Based on the aspect ration of the video source PQ DVD to iPod Video Converter will choose the best resolution for the output iPod video. Nevertheless you can select a resolution of your choice to stretch/squash the picture. Alternatively, you can choose a Crop Mode to cut unimportant parts of the video (like top/bottom black bars or subtitles).
You can also adjust the desired quality to reduce the output size of the movie.
In the preview window you will see what the resulting movie will look like.
When you have set the desired settings simple click on the "Record it" button to convert the video/DVD.
Depending on the settings a 60 minutes video is converted on average for 15 minutes.
4. When the process finishes you can test the recorded video file on your PC using QuickTime to see if it works well.
Then launch iTunes, add the recorded file into the library and update iPod (under iTunes' File menu). And have a nice time!
Additional Settings
1. Video Settings
Video Frame Rate
Known as Frame Per Second (FPS). It refers to the number of pictures displayed in 1 second in order to form continuous motions. The default frame rate is 15 fps. You may choose 24fps to get more continuos motions.
When selecting higher fps, increase the movie quality and size a little. This is because more frames need some amount of additional motion data to be stored.
Brightness Level
Increase the level to make video appear brighter on your iPod screen. The default is level 0 (No brightness change from the original video).
2. Audio Options
Audio Quality
There are 6 audio quality modes to choose: 32kbps Mono, 48kbps Mono, 48Kbps Stereo, 64Kbps Stereo, 96Kbps Stereo, 128Kbps Stereo.
Audio Bitrate (in Kbits per second)
Audio bitrate refers to how many data storage is allocated to store audio signals. The higher audio
bitrate, the better audio quality.
Audio Volume
You can change output audio volume in "Output Settings" dialog. The default volume level is 5 (original volume).
Stereo to Mono
When the output audio is set to Mono, you can choose which stereo channel (of input source) to be copied into the Mono channel (output). It is useful for some video sources (e.g. VCD) which use the left, right channels for different languages or for karaoke.
3. DVD subtitle(subpicture), language
It is recommended to use the native DVD menu in the preview panel to set subtitle(subpicture) and language. (Click "DVD menu" button on the right to show native DVD menu in the preview panel) You may also change the subtitle(subpicture), language in the program's Options menu, but there are some DVDs that require the change must be made in the native DVD menu instead of the program's menu.
Windows XP
Windows 2000
Windows ME

Thank you for your posting, which is very helpful, however it will be better if you can post on the Video forum as well
http://discussions.apple.com/forum.jspa?forumID=807
By the way, I must say that it is a very good post

How to convert my whole website into PDF

I have my own blog. How can I convert my whole blog into pdf for backup ?

I am also looking for exact answer to backup my content of blog into PDF. So, How should I do for my blog ? Is there any software or tools for it?

How to convert MP4 to DVD

I have movies in MP4 format. How do I convert them to DVD to play on regular DVD players?

You need to use a dedicated video DVD creation application such as iDVD.
(68000)

How to Convert Outlook to Lotus Notes ?

I'm looking for the way to convert my Outlook email archive (.pst) to Lotus Notes mail file (.nsf). I found that there is some commercial 3rd party tool doing this job which is too expensive for me. Is there any good and manual way to
convert .pst to .nsf or to move my mail data from Outlook to Lotus Notes ?

Hi andy
Here is a free utility to convert Outlook to Lotus Notes known as Nupgrade.exe. With the help of this tool you will easily transfer Outlook data to Lotus Notes. With this tool you will need to remember few things like:
• The Upgrade Wizard is not installed with the Notes client, by default. To obtain the Upgrade Wizard, perform a custom install of the Notes client and select to install the Migration Tools components.
• Confirm that Microsoft Outlook is configured on the workstation as "Corporate or Workgroup" instead of "Internet Mail Only"
• Confirm that Microsoft Outlook is configured as the default mail application on the workstation.
Verify which Outlook .pst files are linked to a profile on that workstation.
After that with the help of few easy steps you will easily convert Outlook PST to Lotus Notes:
1. Open a Command Prompt window by selecting Start --> Run and then type in:
cmd.exe
2. Change to the Notes client program directory. For example:
cd program files\lotus\notes
3. Enter the following command to launch the Upgrade Wizard:
Nupgrade.exe 3
4. Click "Next" to continue past the Welcome Screen.
5. Select your profile that is linked to the .PST and .PAB files to be migrated and then click "Next" to continue.
6. Specify the type of Upgrade Method to be performed, either "Express" or "Custom", and then click "Next" to continue.
Note: If you select "Custom", on the following screen, you can specify which items that you want to convert to Notes. However, if you select "Express" (the default upgrade method), all .PST files and .PAB files linked to the selected profile will be converted
to Notes.
7. Click "Next" to accept the defaults for Personal Folder Conversion Options. By default, the Upgrade Wizard will convert the contents of .PST files into a Notes database based on the default mail template (e.g., Mail6.ntf). The Notes database created by the
upgrade wizard is created in a Mail folder below the Notes client data directory.
8. Select "Finish" to begin the conversion process when you reach the begin upgrade screen. Once the Upgrade Wizard begins the conversion process, you will need to supply the password for the Notes User ID.
But if your MS Outlook account is connected is “Internet Mail Only” then you will need to use a third party tool like
Outlook to Notes Converter which easily convert Outlook data to Lotus Notes file format. Because a right third party tool is always guarantee for secure data conversion process. Read more:
http://www.en.psttonsf.org

How to convert my personal DVDs to be edited in Final Cut Pro 7?

Hi guys,
I am working on a project that need to edit my personal DVDs in Final Cut Pro 7, but what i need to do first is rip the DVD to a Final Cut Pro 7 compatible format, to which format should i convert the DVD? I am using iSkysoft iMedia Converter for Mac, it has many output formats. It is a little difficult to decide the right one.
Would you please help? If possible, please tell me the codec/ resolution/ bitrate . thanks in advance!
Albert

I understand what format DVDs are. My suggestion is - if you generated these DVDs, you must have the source footage. Why not use that?
I'd suggest you open the manual and start with the getting started section and work through any tutorials that came with your version. This program is complex and you need a fundamental understanding of more stuff than we can cover in this forum.
Ken Stone's website has a number of tutorials and is a good source of new user information as is Lyndia.com
x

How to convert VHS to DVD using FCP 7?

Hello. For a brief, non-technical, introduction: I have dozens of family VHS tapes that I'd like to convert into a digital format where I can edit them and eventually transfer them onto an external hard drive and possibly DVDs as well. Ideally, I'd love to do all of the logging, capturing, and editing in FCP, but I am having difficulty figuring out set up and proper format conversions to obtain the best results. I am not a computer wizard, so a "Just-For-Dummies" walk through would be greatly appreciated.
My questions are:
1) What should my flowchart of devices be from VCR to FCP? (ie: converters, cables, inside FCP setup)
2) What is the best video format for VHS to digital conversion?
Here are the specs for devices I currently possess. I realize I may need to purchase more, but this is what I have to work with at the moment.
MacBook Pro: Mac OS X Version 10.6.8. | Processsor 2.4 GHz Intel Core i5 | Memory 4GB 1067 MHz DDR3
Final Cut Pro 7.0.3
VCR: Toshiba SD-v295ku (output is Red, White, Yellow RCA)
ION Video 2 PC converter: RCA cables to USB (this is already installed on my Mac and has successfully worked for video capture alone)
Sony Digital Handycam DCR-TRV330
My Passport 2TB Hard Drive
Thank you so much in advance for any help you can offer.

Buppas
Getting out of my depth here a bit.
I do have FCP 6 but have not used it much at all.
There are many people here that are more able than me who may come to your rescue but anyway here are a few suggestions to try.
Sony can be set to one of 2 audio modes, 12bit=32kHz, or 16bit=48kHz.Ensure set to 16bit , around page 85.
Capture has to match 16bit=48kHz.
In FCP7 User Preferences >General check box "Abort capture on dropped frames.On timecode break Make New Clip ".
Also in Preferences> General I noticed this but not sure if it will help...Check box "Sync audio capture to video source if present".
Coming back to the Sony, and still stabbing in the dark, there is a Time Base Corrector (TBC) setting that you could try both on and off.
Also,do not start and stop the VHS player frequently; let it run through from start to end if you can to avoid breaks.
Another option but not ideal.
What happens when you import into iMovie, do you still get out of sync?
If you dont then you could import to iMovie and then import the DV file/files to FCP7.
This will not take up double the space as FCP7 references the files in iMovie.
Other than this you could try a "search communities" or hope for more suggestions to come in.
Good Luck.

How to convert images which is not supported by the ImageIO?

I have made one project.
In that i have used some images and render them on some screen.
Now there are many images which is not supported by the ImageIO class bcz its showing me exception like
javax.imageio.IIOException: Unsupported Image Typeso what to do to render this images or can i convert this kind of images to supported images?
is there anything which can render this kind of images.
Edited by: Nitz_09 on May 24, 2010 2:12 AM

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

How to convert .IMG or DVD with menus to DMG EXE and/or iPad App

Help!!!
I have made a load of DVD's I want to convert into applications for windows, mac and iPads .... I've read a load of threads by others who have asked simular questions but the only solutions are to convert them into individual videos ...BUT... I want to keep the menus ... Is this really an imposible task? Any suggestions would be gratefully recieved.
Many thanks,

Ah yes, sorry I didn't really explain very well as I tend to ramble...
I volunteer for a special education school and am trying to create choosing activities that can go onto the network. We have a program that symblifys the system so that the children with mild-severe learning difficulties can acess certain applications. I'd like the resources I have made to be acessed by both student and teachers throughout the school.
Yes, burning them to disk is a last resort. It gets really busy in a PMLD class. And any disks I leave in the class usually ends up being severly scratched, dribbled, chewed thrown or just simply lost! And this is just one class!
I did at one point try to just copy the DVD files onto the school computer and run it that way but I got in trouble with the IT guy at the school. There was an issue with space...but I thought If i could give him a program of each choosing activity for the various topics he could instal it on the network which could then be acessed on any computer.
The mac version was just a thought really. If i can manage to convert any of this...one day...when someone clever invents something that will make magic...I want to be able to upload it onto the TES website as a free teaching resources. And I didn't want to exclude mac users.

How to convert swf to dvd which contain buttons

i've made an swf multimedia design and i want to convert it to a dvd in which buttons in my swf work is there any programme or solution to make it done

This is the Adobe Connect forum. Please post this to the proper Flash forum so the experts there can help you.

How can I create a DVD (not CD) slide show with PSE8. Is the only option CD?

Do I need to upgrade to PSE9 for the DVD option for slide show output?

No, you can't create a video dvd with just PSE, and PSE 9 is no different from any other version where this is concerned. (Adobe wants you to use Premiere Elements.) However, if you have a DVD burner, you must have gotten some kind of software with it that can make a DVD for you. Create your slideshow, output as WMV and then use your other software to burn the actual video disc.

Using MPEG streamclip to convert VIDEO_TS files (DVDs) with chapters

I am using MPEG Steamclip to convert DVDs (ie VIDEO_TS files).
Where the DVD has no chapters then it converts in one go into a new file.
However where the DVD has some chapters, it gives me an option to convert each chapter individually. I actually just want to convert the whole DVD in one go, with all the chapters merged together - is there any way to do this?
Thank you

Thanks for the help

How do I copy a few lines from a pdf document to a Word document? I'm not looking to convert the whole document, just need to copy a few lines here and there.

How do I copy a few lines from a pdf document to a Word document?
I'm not looking to convert the whole document, just need to copy a few lines here and there.
ps. Wow, what a user UNFRIENDLY site this is!

In most cases you can just select the text and copy/paste. You can do that unless the file is a picture/scan.

Since upgrading to new version I do not know how to downloand and convert videos to DVD. Please help!

Since updating to new vision of firefox I do not know know to download and convert videos to DVD. Please help!

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How to convert a whole dvd (not seperate chapters)

Similar Messages

Maybe you are looking for