How to convert AIPD Image to JPEG?
Hi everyone,
I am having problems with (what I thought to be) a simple task. Using IMAQ Vision package, I want to convert a greyscale (SGL) "*.AIPD" Image to a JPEG. I will post the code that I thought would work, but I'm obviously not understanding something fundamental to the images because it doesn't work and is giving me..'wrong image type'.
I'm stuck, again, and appreciate any help.
Thanks,
Jonathan
Attachments:
AIPD_to_JPEG.vi 41 KB
Jonathon
Try building your VI like this
and see if this works for you.
cheers
David
Message Edited by David Crawford on 09-12-2006 09:55 PM
Attachments:
AIPD_to_JPEG.jpg 21 KB
Similar Messages
-
Does Web Module size and convert RAW images to jpeg?
I have never used the Web module before. It looks pretty straightforward but I have one question:
What about images? Does Lightroom take the original RAW images from the library that I've chosen to go into the web site and 'pare the down' or re-size them to be appropriate size for the web site and I assume it would also convert them to jpegs in sizes needed for preview and for thumbnails?
I assume that when you start the 'machinery' for Lightroom to build the web site that it will put all of the images needed as copies from the originals into a proper folder that can be then uploaded to the web?
Thanks,
Ken
PS: if I choose a flash template, which are pretty nice, does it also include the flash module so that people can run the flash presentation on their computers?It will convert all images to jpegs, resize ... however you set it up ... and yes, it is so straightforward as it seems to be .
It makes no sense to upload RAW files to the web for public use in the first place. Second, LR does not touch/change the RAW files. Therefore, how would it be able to integrate your dev settings when using RAW on export?
You can add the ftp target in LR and it will upload directly to your web server.
If you choose Flash-based, people need to have the Adobe Flash player installed on their computer. The Flash player itself is not part of the LR setup. Most of people already have it installed and who doesnt will be asked to install it. -
I am operating with iPhoto 6.0.6 and have a lot of recent wedding photos that were sent to me in PNG format. How do I convert these images to jpeg? I've found lots of shareware for conversion but nothing that will run on a mac.
Is there any reason to convert them? PNG is just as portable as JPEG.
You can export png from iPhoto and choose JPEG as the destination format using the File -> Export command.
Regards
TD -
Converting tiff images into jpeg
I would like to convert tiff images into jpegs with iphoto. I dont want to duplicate all my photos and then have to delete one by one!
How do I do this?Welcome to the Apple Discussions. The short answer is that you cannot. You will have to export the files via the File->Export->File Export menu option, selecting jpeg as the format and checking the box to include the keywords and comments, and maximum size. Then import the jpgs and delete the tiffs.
You can get all of the tiff files together by doing a search for .tif. Then do a Select All (Command-A) and go to the export menu. Export all to a folder on the desktop. Import the new jpgs into iPhoto.
To get rid of the tiffs once the jpgs are imported do another search for the tifs and select all again. Then type Command+Delete. That moves the tiff photos to iPhoto's Trash bin. Then empty the bin.
If you have multiple files with the same file name you'll have to do some renaming before the export. You can batch rename them using the option Title to Date/Time or just date alone. I use the date taken as the file name as that gives me excellent chronological sorting and searching by filename for dates.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
How to convert a image layer to a text layer any idea? a image looks like a text in layers box
How to convert a image layer to a text layer any idea? a image looks like a text in layers box
You can't convert an image into a text layer. What you can do is clip an image to a text layer so that just the image layer shows up where there is text. Create a text layer, then above it put your image layer. Hold down the alt/opt key and click between the two layers to clip them.
-
HOW TO CONVERT RAW FILES TO JPEG RGB 8 BIT in iphoto
Can someone please tell me how to convert RAW files to jpeg RGB 8 bit in iphoto on an iMac?
How are you trying to "export to Mypics"? The only way to get a Raw out of iPhoto is to export with the Kind set to Original.
Regards
TD -
How to convert TIF image to Binary internal table.
How to convert TIF image to Binary internal table
Hi,
this forum is for the SAP Integration Kit.
I would first of all suggest you describe your problem in more details as you are not even describing which products you are using and second I would suggest you post it into the correct forum.
regards
Ingo Hilgefort -
How to convert from image based pdf to text based pdf
I have Adobe 9 Pro. How to convert from image based pdf to text based pdf? For example, if someone emails a scanned pdf to me, how do I convert that document into a text based pdf?
To perform OCR, open the document and select: Document > OCR Text Recognition > Recognize Text Using OCR
More information on the various options is in the Acrobat help doc. -
How to batch convert tiff images to jpeg in Pages document
I have a large (about 1Gig) Pages 5 Package document with hundreds of images, mostly in tiff format. Since the software became nearly unresponsive, I need to convert image files in jpeg (though I wonder why unresponsiveness in the Package mode). Reducing file size is not an option since it decreases resolution.
Is there a script, perhaps, that would convert all images in a Pages document to jpeg?What version of Pages?
Not to my knowledge.
You may be able to create an AppleScript, a very long shot, but it will not use Pages to do the conversion and will take longer to do than simply correcting all the images and reimporting them.
Preview.app can convert from one format to another and there are Automator workflows that will convert image formats. You will lose some detail because jpegs are a lossey format whilst tiff is not. Have you looked at reserving the images as compressed tiff files?
How did you get into this position? You must have known the file would be huge with so many large images in it. Pages 5 is particularly bad, increasing file size exponentially.
Peter -
Hi,
We have employee photos(JPG Format) stored in Content server. And now we want to print the photos in smartforms. For this I had written the below code to read the photo from content server in binary format as below.
REPORT ZTEST1.
PARAMETERS P_PERNR TYPE PERNR_D.
DATA: PS_CONNECT_INFO TYPE TOAV0,
IT_BINARY TYPE TABLE OF SDOKCNTBIN.
CALL FUNCTION 'HR_IMAGE_EXISTS'
EXPORTING
P_PERNR = P_PERNR
* P_TCLAS = 'A'
* P_BEGDA = '18000101'
* P_ENDDA = '99991231'
IMPORTING
* P_EXISTS =
P_CONNECT_INFO = PS_CONNECT_INFO
* EXCEPTIONS
* ERROR_CONNECTIONTABLE = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
IF PS_CONNECT_INFO IS NOT INITIAL.
CALL FUNCTION 'SCMS_DOC_READ'
EXPORTING
STOR_CAT = SPACE
CREP_ID = PS_CONNECT_INFO-ARCHIV_ID
DOC_ID = PS_CONNECT_INFO-ARC_DOC_ID
* PHIO_ID =
* SIGNATURE = 'X'
* SECURITY = ' '
* NO_CACHE = ' '
* RAW_MODE = ' '
* IMPORTING
* FROM_CACHE =
* CREA_TIME =
* CREA_DATE =
* CHNG_TIME =
* CHNG_DATE =
* STATUS =
* DOC_PROT =
TABLES
* ACCESS_INFO =
* CONTENT_TXT =
CONTENT_BIN = IT_BINARY
* EXCEPTIONS
* BAD_STORAGE_TYPE = 1
* BAD_REQUEST = 2
* UNAUTHORIZED = 3
* COMP_NOT_FOUND = 4
* NOT_FOUND = 5
* FORBIDDEN = 6
* CONFLICT = 7
* INTERNAL_SERVER_ERROR = 8
* ERROR_HTTP = 9
* ERROR_SIGNATURE = 10
* ERROR_CONFIG = 11
* ERROR_FORMAT = 12
* ERROR_PARAMETER = 13
* ERROR = 14
* OTHERS = 15
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF
Now the issue is I want to convert that binary data to bitmap image and upload the same in to SE78. So that I can use that BMP image from SE78 in my smartforms.
I had used the class CL_IGS_IMAGE_CONVERTER to covert the image into bmp but it is giving error that error in IMAGE DATA CORRUPT & Error Code 3. The conversion code used is as below.
******* CONVERT THE JPG IMAGE INTO BMP PHOTO. **********
DATA: L_IGS_IMGCONV TYPE REF TO CL_IGS_IMAGE_CONVERTER,
L_IMG_BLOB TYPE W3MIMETABTYPE,
L_IMG_SIZE TYPE W3PARAM-CONT_LEN,
L_IMG_TYPE TYPE W3PARAM-CONT_TYPE,
L_IMG_SUBTYPE TYPE W3PARAM-CONT_TYPE,
L_IMG_URL TYPE W3URL,
L_ERR_CODE TYPE I,
L_ERR_TEXT TYPE STRING,
P_DEST TYPE CHAR32 VALUE 'IGS_RFC_DEST'.
DATA: G_IMG_BLOB TYPE W3MIMETABTYPE,
G_IMG_TYPE TYPE W3PARAM-CONT_TYPE,
G_IMG_SIZE TYPE W3PARAM-CONT_LEN.
IF NOT IT_BINARY[] IS INITIAL.
G_IMG_BLOB[] = IT_BINARY.
CREATE OBJECT L_IGS_IMGCONV
EXPORTING
DESTINATION = P_DEST.
CALL METHOD L_IGS_IMGCONV->SET_IMAGE
EXPORTING
BLOB = G_IMG_BLOB
BLOB_SIZE = G_IMG_SIZE.
CASE PS_CONNECT_INFO-RESERVE.
WHEN 'TIF'.
G_IMG_TYPE = 'image/tiff'.
WHEN 'JPG'.
G_IMG_TYPE = 'image/jpeg'.
WHEN 'PNG'.
G_IMG_TYPE = 'image/png'.
WHEN 'GIF'.
G_IMG_TYPE = 'image/gif'.
WHEN 'BMP'.
G_IMG_TYPE = 'image/x-ms-bmp'.
WHEN OTHERS.
EXIT.
ENDCASE.
L_IGS_IMGCONV->INPUT = G_IMG_TYPE.
L_IGS_IMGCONV->OUTPUT = 'image/x-ms-bmp'.
* PERFORM GET_SIZE USING PICTURE_CONTAINER
* L_IGS_IMGCONV->WIDTH
* L_IGS_IMGCONV->HEIGHT.
CALL METHOD L_IGS_IMGCONV->EXECUTE
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC IS INITIAL.
CALL METHOD L_IGS_IMGCONV->GET_IMAGE
IMPORTING
BLOB = L_IMG_BLOB
BLOB_SIZE = L_IMG_SIZE
BLOB_TYPE = L_IMG_TYPE.
SPLIT L_IMG_TYPE AT '/' INTO L_IMG_TYPE L_IMG_SUBTYPE.
ELSE.
CALL METHOD L_IGS_IMGCONV->GET_ERROR
IMPORTING
NUMBER = L_ERR_CODE
MESSAGE = L_ERR_TEXT.
BREAK-POINT.
ENDIF.
ENDIF.
ENDIF.
So could you please some one help me how to convert JPEG Photo to BMP programatically.
Regards,
Mayur.johnandersonpalmdesert wrote:
My printer is requesting a vector file.
Jpeg File format does not support vectors. Photoshop has limited vector support and tools. Photoshop can not save vector file formats like SVG. What File type does your printer want?
Adobe Illustrator is Adobe vector application. -
How to convert PNG image to Vertor Image to make font on Mac
Hi Mac People,
I like to create a set of font, and I have made them in a image editing tool, I have FontForge downloaded but decide to use it to convert instead direct design them inside.
So now I don't know how to convert the PNG image to vector image required by the FontForge, I read some post mentioned Ubuntu has utilities to convert, but I'm not sure OS X has that function too.
Could anyone let me know how to convert PNG so I can create my fonts?
If PNG can't, the software can export TIFF or jpeg or similar.
Please help me, I need make them this few day.
Thanks everyone for giving me a hand!take a look at:
http://developers.sun.com/techtopics/mobility/midp/articles/picture/ -
Converting raw images to jpegs using PSE 11
I have started to capture only RAW images from my Sony NEX 7 camera. However, I wish to be able to send JPEG images to my friends ( prior to RAW editing ). How do I convert/copy my RAW images to JPEGs using PSE 11?
Thanks
DerekAfter you're done in camera raw (or in your case, without doing anything, but you'll just get the default conversion, because you MUST convert the files), click the Open button, then save in the format of your choice in the editor. JPEG is an 8 bit format so you will want to either set the raw converter's pulldown menu to 8 bits or you will need to go to Image>Mode> 8 bits/channel in the editor. If you're emailing, you can also use Save for Web to size them down if necesary.
If you use the organizer, you can just use file>export as new files and be sure to send the jpgs someplace easy to find. -
Need to convert an image to .jpeg using Java !
Hello,
i am working in images now. i need to convert any image in the form of .jpeg using Java. in other words, i need to store an image in the form of .jpeg format. can any of u help me ! thanks in advance.
- KrishnaThere's also jimi, at http://java.sun.com/products/jimi/
You can do something like:
image = new BufferedImage (width, height, BufferedImage.TYPE_INT_RGB);
// create your image
String path = "/path/image.jpg";
Jimi.putImage(image, path);
[\code] -
How to convert RAW files to JPEG?
I have a bunch of raw files and I am not sure how to convert them to JPEG. I sure would appreciate some help with this. Thank you
As you are posting on the Canon forum, I will assume you are using a Canon camera. Your camera came with the software you need. It's called Digital Photo Professional. It will also have the user manual for the software.
-
How to convert RAW images to JPG in Imagebrowser EX 1.4.0.5
I installed ImagBrowser EX so I can view my raw images. It works fine for viewing but I can't find how to convert them to raw images. The manual and help file says to go to Edit > Process RAW Images but when I go to the edit menu, there is no such option. There is only Correct red-eye, auto correct, adjust color and brightness, increase sharpness, crop imae, insert text, edit movies and extract multiple images from movie
Help?You need to install Canon Digital Photo Professional from the camera-supplied CD.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472
Maybe you are looking for
-
Write-up with transaction of Disposed Asset
Hi, Can you post a write-up to an asset that has been disposed. Please advise, Thanks
-
Creating a youtube widget in iAd Producer for Ibooks Author
Hello, I am trying to create a widget in iAd Producer to add to my iBooks Author template featuring a youtube video. I am able to create and save the widget but when I place it into iBooks Author template I get a large gray box with a small black box
-
LR 2.7, How to Edit Copyright Metadata at Export?
Attempted to edit metadata but my changes aren't saved...that's one issue. So, I created a new metadata preset can't quite figure out how to select the new preset at export; I'm unable to change the metadata preset to the new one at export screen. C
-
What i do to open windowsexe cds on my mac?
what i do to open windowsexe cds on my mac?
-
Compiling and Installing Compiled Kernel
Hi everyone, today i followed the "Kernel Compilation From Source" (https://wiki.archlinux.org/index.php/Ke … rom_Source) ArchWiki to compile a kernel downloaded from kernel.org. And i use the second method to compile and install with makepkg. When t