How to convert AIR-AP1041N (autonomus) to AIR-LAP1041N (lwapp)

Hi,
some days ago I succesfully converted AIR-LAP1041N (lwapp) to AIR-AP1041N (autonomus).
I used c1140-k9w7-tar.124-25d.JA1.tar which is available to download in Download Software Section for this AP.
But there are any autonomus to lightweigt firmware for this AP.
I tried to use c1140-rcvk9w8-tar.124-21a.JA2.tar for 1140 but AP hungs after that.
How can i back to LWAPP version in 1041?

this is what can i see on the console:
Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#########################################################################################################################################################################################################################
File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entry point: 0x4000
executing...
enet halted
ŔŔŔŔŔŔŔŔŔŔŔŔŔ&/îçďä/÷Řč/ěČÔÓďěĐďçô3Ď/ěÜě/ěŘŔČ/ďŕ÷4Ç/ďÓď÷÷óÜ÷ÜŔČ/÷ÜÇ÷÷ÜëĎ/ěŔÄ/ďĐ/ěŔď÷ďËĎĎ÷7ËĎ÷ďŔÓď/đĂç/ďÄĎ÷3ÇďŔčď÷ÜËďďć/÷Řč/÷÷÷ÜŔĂďÜÜËďŔĚď÷Üč÷Ü÷÷ŢÜëĎ/Ď/ďěä/÷ĐÇ/óÜ÷ěŔč÷3Ŕď÷7Ű/ěäď/÷0ŘÜĐß/÷/ďč/ěäÜÔßĎîčďďĂĎ/ěŔŰŔ$/ěçďä/÷Řč/ěČ/đĂ$/÷ěĐďçÜŘŘ//ďç/ěŔĂďŔ
/Ď;ÜÜËďĎóÜçäÜäćďŰăóŔĂĎ÷ěŔç/ďÄ/Ď/ďěä/÷ĐÇoóóÓŔĐÓ/÷ŔßĎěŔč÷3Ŕ$/÷ěĐďçÜ÷÷ëËď÷÷4Ç/÷čĂďĂÜĎ÷îŔď÷7ŕ/ďč/ěä/đĂ'ď÷ěčďďĂĎ/ěŔÇ÷0ëď/ěŔĂďĎčĎ;ÔŔç/ěÇĎóĚëäÜääďŰďŕăçÜŔŔŔŔŔŔŔŔŔŔÇ/÷ÜÇď÷ÜÔóďďË/÷ÜŘŔĎ÷ŘÜŔŔŔŔŔŔŔŔŔŔăďŕŔ//ěçďŔ(/ď/÷0Üčä/÷ďË/đĂŔŔŔŔŔŔŔŔŔŔŔ'/Ď÷Óßď/ěŘŔ/÷4Ěď÷ÜÜ/÷0ŔóëăçčŰăďŕěÜÇď÷ÜôôÔŔ'ď÷ěčďďĂĎ/ěŘŔ/ŢçŕŔ'ď÷ěčďďĂĎ/ěŔĐ/ÜçŕŰ$ďĎë/ÜëđŰóëËĎď/÷÷÷ÜĚÜčĐäăĂ/óÓ0óÔ
but i connected this AP to dhcp server i see that AP recived IP address from DHCP i tries to search conntroller (i can see frames from AP in wireshark, req to DHCP for CISCO-CAPWAP-CONTROLLER).
so in next days i will try to connect AP to the controller (wlc is in different site, without vpn connectivity).
i think that AP is bad, because of this "weirid chars" on console, but maybe when ap updates firmware from wlc, it will be OK.
thanks for help for now.

Similar Messages

How to convert keystore (from native android project) to .p12 to use with AIR project?

Due to the advancements with adobe AIR, I'm really excited to be finishing up a HUGE update of an old project that was originally made with native android.
But, i've hit a brick wall with 2 issues, and it would be terrible if all the work i've done in AIR was for nothing...
First, how do I convert the keystore I previously used (from native android project) to .p12 to use with AIR project? (on a mac)
Second, how do I remove the "air." that gets automatically appended onto the front my android package name? I plan to use a captive runtime, so it's not really needed at all, and I can't upload it like this as an update because it will think it's a different app.
Please help so I can continue using air for all my projects from now on!

Thanks for the reply!
So I'm going through this guide..
http://helpx.adobe.com/air/kb/opt-out-air-application-analytics.html
I followed all the steps, made all the adjustments to the androidmanifest.xml like it asks.
But when i get to the stap that says
"Run the following command to create the resource file for the updated AndroidManifest.xml:"
I run this..
    "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platform-tools/aapt" package -f -M AndroidManifest.xml -F resources.arsc -I "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platforms/android-8/android.jar" -S ./res
But I keep getting the same error
    ./res/layout/expandable_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/expandable_multiple_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/main.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/multiple_file_selection_panel.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/ssl_certificate_warning.xml:1: error: Error parsing XML: not well-formed (invalid token)
The guide doesn't say anything about these xml files, and im not sure what to do with these ore how to handle them.
If i go into the res/layout folder, and just delete these (i know theyre for my layout and i need them, but im just saying i deleted them for the sake of a test)
I was able to get through the rest of the steps in the guide fine, make an apk, and put it on my phone...only to find out the app will crash the moment you try to run it.
So my question is, does anyone with any experience re-packaging an android application know how I might get around this or take care of the errors with the xml files in the layout folder?
Thanks!!
EDIT to note something i've tried:
So, earlier in the guide they have me use thing thing called the "AXMLPrinter2.jar" to make the AndroidManifest.xml readable so i can edit it.
I run something like this:
    java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" AndroidManifest.xml > AndroidManifest.xml.bk
This makes a new file "AndroidManifest.xml.bk" and i can edit that.
So, I was thinking with all of these layout xml files, maybe I could run this "AXMLPrinter2.jar" on them and then edit them. Because right now if you open them they're not human readable, and its hard for me to work on them if they're not...
But when i do the same command I did on the AndroidManifest.xml i just get blank files...
I tried
    java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" main.xml > main.xml.bk
Just get a blank file.
So, i think the issue might be with these just not being re-formatted to human readable.

How can i sync music from mac air to zen creative mp3 player

how can i sync music from mac air to zen creative mp3 player

iTunes will only sync with Apple devices. You may find when you plug in your player it appears on hte desktop as another drive. You can drag files from iTunes to that drive. You may need to then place them in a special folder but all this is something for you to research since players differ. We use a Sansa Clip and a RCA player with our iTunes library and that how we do it.
Make sure your player can play the format files you have in your collection. Our slightly older players will not play AAC which is the standard format used by the iTunes Store. If you find that to be the case you will have to convert formats.

How do i connect my new apple air laptop to my TV using a yellow,white, red cord

How do I connect my new MacBook AIr to my TV using a Composite AV Cable. THe cable has a tiny connector at one end and has the red, white, yellow plug in for the TV on the other. I am wondering if I have the wrong connector?

http://store.apple.com/us/buy-mac/macbook-air?product=MD712LL/A&step=config
Scroll down to accessories.

How do I restore my 2011 MacBook Air to its original settings?

How do I restore my 2011 MacBook Air to its original settings for resale? When I do the cmd R and go through the process, it begins the restore process for Mountain Lion because I upgraded to Mountain Liion on this machine a few months ago. And it's asking for my Apple ID. If I do that upgrade, the buyer will have a version of Mountain Lion that is associated with my Apple ID and that won't work. Also, isn't there licensing issues in such a case? I want to restore the MacBook Air to its original factory settings when I purchased it in April of 2011. At that time it was Lion and not Mountian Lion. And I don't want any software on this computer to be associated with my Apple ID.
Thanks for all your help.
Ron

Press Command, Option and R keys on boot, open Disk Utility, erase your disk and reinstall Lion

How can I register my new ipad air?

How do I register my new ipad air?

You can register its serial number to your iTunes account via : https://supportprofile.apple.com/
Is that what you mean ?

How can I connect my new 11" air by thunderbolt to my DVI-D monitor?

How can I connect my new 11" air by thunderbolt to my DVI-D monitor? I have seen mini-display to dvi-d, but am unsure that this will work with thunderbolt port?

With a Mini Display Port to DVI adapter. Mini displayport and TB are one in the same.

How can I prevent my new Mac Air from freezing in Safari

How can I prevent my new Mac Air from freezing in while using Safari?

Hi nainmom,
Thanks for visiting Apple Support Communities.
I recommend starting with these steps if your iPod nano is not recognized by your Mac:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy

How to delete spotlight data in macbook air ?

how to delete spotlight data in macbook air ?

Open system preferences and go to Spotlight then to the privacy tab and add the Macintsoh HD to the list for "Prevent Spotlight from searching these locations. That will remove all spotlght data. Then you should highlight that entry and click the Minus ( - ) sign at the bottom to have spotlight reindex your drive.

How can i print from my iPad Air to my hp printer

how can i print from my iPad Air to my hp printer

Hi there Roger,
Check out the link below...
How to Print with an iPad, iPhone, or iPod touch
http://www8.hp.com/ie/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Hi I just got my new Apple TV and I cant figure out how to connect it with My MacBook Air (11-inch, Late 2010- Processor 1.4 GHz Intel Core 2 Duo) OSX Version 10.8

Hi
Hi I just got my new Apple TV and I cant figure out how to connect it with My MacBook Air (11-inch, Late 2010- Processor 1.4 GHz Intel Core 2 Duo) OSX Version 10.8

Are you referring to mirroring or you just unable to set up homesharing.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

How do I AirDrop between my MacBook Air (OS 10.10.1) and my iPhone 5s (vs 8.1.2)?

How do I AirDrop between my MacBook Air (OS 10.10.1 Yosemite) and my iPhone 5s (vs 8.1.2)?
Bluetooth & wifi (same wifi) are turned ON for both my iPhone & laptop.
On the iPhone, I have selected a Camera photo to AirDrop and I see the AirDrop icon above the apps Message, Mail, Twitter, etc. but I don't see an option to actually AirDrop it onto the laptop.
On the laptop (MacBook Air w/Yosemite), I'm in the Finder and have selected AirDrop, but to devices revealed in the window.
What am I missing??????

Which MacBook Air do you have? It must be a 2010 or newer according to this article: http://support.apple.com/en-us/HT203106
~Lyssa

How should i connect my new macbook air to lcd projector for presentations?

how should i connect my new macbook air to lcd projector for presentations?

One of these should work, depending on the projector. Just note both will not allow you to play protected movies on the projector.
VGA
http://store.apple.com/us/product/MB572Z/A?mco=MTY3ODQ5OTY
DVI
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

How to turn off screen on Macbook Air when connected to Computer LeD monitor?

How to turn off screen on Macbook Air when connected to Led monitor screen?

The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
Matt

Converting the web app into AIR app leads errors

Hi all,
I am new to flex, i am trying to convert a web app into air app.
I changes the tags and when i complie i get the below 3 error popups with dismis and continue buttons on the bottom right..
Error: Error #2067: The ExternalInterface is not available in this container. ExternalInterface requires Internet Explorer ActiveX, Firefox, Mozilla 1.7.5 and greater, or other browsers that support NPRuntime.
Error: Error #2067: The ExternalInterface is not available in this container. ExternalInterface requires Internet Explorer ActiveX, Firefox, Mozilla 1.7.5 and greater, or other browsers that support NPRuntime.
TypeError: Error #1009: Cannot access a property or method of a null object reference.
Any help would be greatly appreciated.
Thanks in advance.

Thanks peter.
commenting those lines avoids the first 2 errors but still i am getting the below errors.
this is a microstrategy flex project.
Error #1009: Cannot access a property or method of a null object reference.
at com.microstrategy.web.vf.viewer::MstrWindowedApplication/handleCreationComplete()[Z:\Flex \projects\VisFrameworkAIR\src\com\microstrategy\web\vf\viewer\MstrWindowedApplication.as:9 9]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9298]
at mx.core::UIComponent/set initialized()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\core\UIComponent.as :1169]
at mx.managers::LayoutManager/doPhasedInstantiation()[C:\autobuild\3.2.0\frameworks\projects \framework\src\mx\managers\LayoutManager.as:718]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/callLaterDispatcher2()[C:\autobuild\3.2.0\frameworks\projects\framew ork\src\mx\core\UIComponent.as:8628]
at mx.core::UIComponent/callLaterDispatcher()[C:\autobuild\3.2.0\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8568]

How to convert AIR-AP1041N (autonomus) to AIR-LAP1041N (lwapp)

Similar Messages

Maybe you are looking for