How to convert AIR-AP1131AG to AIR-LAP1131AG

Hi,
We bought some autonomous AP with the later goal to convert them. We now run with 3 WLC, we would like to migrate those APs from Autonomous to Dummies ?
How could we do that. We know that i could be done.
Thanks a lot

This is a good place to start:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode
April 24, 2008
This application note describes how to upgrade autonomous Cisco Aironet access points to lightweight mode so that they can communicate with wireless LAN controllers on your network. It contains these sections:
â¢Upgrade Process Overview
â¢Solution Requirements
â¢Important Notes
â¢Preparing for the Upgrade
â¢Upgrade Procedure
â¢Post-Upgrade Tasks
â¢Importing the Output of the Upgrade Tool into WCS
â¢Caveats
â¢Terms and Acronyms
â¢Related Documents
â¢Appendix A: Configuring DHCP Option 43 for Lightweight Cisco Aironet Access Points on Windows 2003 Enterprise DHCP Server
â¢Appendix B: Configuring Access Points in Cisco LWAPP Mode for Easy Deployment

Similar Messages

How to convert AIR-AP1041N (autonomus) to AIR-LAP1041N (lwapp)

Hi,
some days ago I succesfully converted AIR-LAP1041N (lwapp) to AIR-AP1041N (autonomus).
I used c1140-k9w7-tar.124-25d.JA1.tar which is available to download in Download Software Section for this AP.
But there are any autonomus to lightweigt firmware for this AP.
I tried to use c1140-rcvk9w8-tar.124-21a.JA2.tar for 1140 but AP hungs after that.
How can i back to LWAPP version in 1041?

this is what can i see on the console:
Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#########################################################################################################################################################################################################################
File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entry point: 0x4000
executing...
enet halted
ŔŔŔŔŔŔŔŔŔŔŔŔŔ&/îçďä/÷Řč/ěČÔÓďěĐďçô3Ď/ěÜě/ěŘŔČ/ďŕ÷4Ç/ďÓď÷÷óÜ÷ÜŔČ/÷ÜÇ÷÷ÜëĎ/ěŔÄ/ďĐ/ěŔď÷ďËĎĎ÷7ËĎ÷ďŔÓď/đĂç/ďÄĎ÷3ÇďŔčď÷ÜËďďć/÷Řč/÷÷÷ÜŔĂďÜÜËďŔĚď÷Üč÷Ü÷÷ŢÜëĎ/Ď/ďěä/÷ĐÇ/óÜ÷ěŔč÷3Ŕď÷7Ű/ěäď/÷0ŘÜĐß/÷/ďč/ěäÜÔßĎîčďďĂĎ/ěŔŰŔ$/ěçďä/÷Řč/ěČ/đĂ$/÷ěĐďçÜŘŘ//ďç/ěŔĂďŔ
/Ď;ÜÜËďĎóÜçäÜäćďŰăóŔĂĎ÷ěŔç/ďÄ/Ď/ďěä/÷ĐÇoóóÓŔĐÓ/÷ŔßĎěŔč÷3Ŕ$/÷ěĐďçÜ÷÷ëËď÷÷4Ç/÷čĂďĂÜĎ÷îŔď÷7ŕ/ďč/ěä/đĂ'ď÷ěčďďĂĎ/ěŔÇ÷0ëď/ěŔĂďĎčĎ;ÔŔç/ěÇĎóĚëäÜääďŰďŕăçÜŔŔŔŔŔŔŔŔŔŔÇ/÷ÜÇď÷ÜÔóďďË/÷ÜŘŔĎ÷ŘÜŔŔŔŔŔŔŔŔŔŔăďŕŔ//ěçďŔ(/ď/÷0Üčä/÷ďË/đĂŔŔŔŔŔŔŔŔŔŔŔ'/Ď÷Óßď/ěŘŔ/÷4Ěď÷ÜÜ/÷0ŔóëăçčŰăďŕěÜÇď÷ÜôôÔŔ'ď÷ěčďďĂĎ/ěŘŔ/ŢçŕŔ'ď÷ěčďďĂĎ/ěŔĐ/ÜçŕŰ$ďĎë/ÜëđŰóëËĎď/÷÷÷ÜĚÜčĐäăĂ/óÓ0óÔ
but i connected this AP to dhcp server i see that AP recived IP address from DHCP i tries to search conntroller (i can see frames from AP in wireshark, req to DHCP for CISCO-CAPWAP-CONTROLLER).
so in next days i will try to connect AP to the controller (wlc is in different site, without vpn connectivity).
i think that AP is bad, because of this "weirid chars" on console, but maybe when ap updates firmware from wlc, it will be OK.
thanks for help for now.

How Convert AIR-AP1262-C-K9 standalone AP to controller based AP?

How Convert AIR-AP1262-C-K9 standalone AP to controller based AP? Is that possibe ? how?

Hi,
First follow these steps to convert to LAP:
http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/
WLC Model: Its all depneds on your requirement.
Its a small enterprize then go for 2500 series otherwise go for 5500 series.
Regards
Dont forget to rate helpful posts

Does WiSM 6.0.196.0 suport AIR-LAP1131AG-N-K9 in H-REAP mode

Hello,
I have WiSMs running code version 6.0.196.0. I have to deploy AIR-LAP1131AG-N-K9 in H-REAP mode.
Q1. Does AIR-LAP1131AG-N-K9 require CAPWAP or can run off of LWAPP?
Q2. Does anyone know how to find out if a WLC is running LWAPP or CAPWAP?
Q3. If one has to convert LWAPP to CAPWAP, how is it done?
Thanks
Bo

Hi,
Q1. Does AIR-LAP1131AG-N-K9 require CAPWAP or can run off of LWAPP?
A1. The AP will run CAPWAP as soon the WLC is running a CAPWAP image. There is nothing special to do on the AP, once it joins the WLC, the WLC will check the image on the AP and if using a diferent one, the WLC will push the correct image to the AP that matchs the WLC version.
Q2. Does anyone know how to find out if a WLC is running LWAPP or CAPWAP?
A2. CAPWAP was introuduced in WLC version 5.2 and all versions above are running CAPWAP software.
•If your firewall is currently configured to allow traffic only from access points using LWAPP, you must change the rules of the firewall to allow traffic from access points using CAPWAP.
•Make sure that the CAPWAP UDP ports 5246 and 5247 (similar to the LWAPP UDP ports 12222 and 12223) are enabled and are not blocked by an intermediate device that could prevent an access point from joining the controller.
•If access control lists (ACLs) are in the control path between the controller and its access points, you need to open new protocol ports to prevent access points from being stranded.
Q3. If one has to convert LWAPP to CAPWAP, how is it done?
A1. On the APs nothing has to be done. Once the WLC is running CAPWAP software, it will automatically push the corresponding AP software to the AP.
WLC runs CAPWAP if the software version is earlier then 5.2. WLC version 5.2 and all versions above are running CAPWAP software.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Converting air-sap2602i-s-k9 from autonomous to LWAPP

Hi guys,
    I need your expertise regarding how to convert from autonomous to LWAPP using AIR-SAP2602i-s-k9 with IOS version of ap3g2-k9w7-xx.152.-2.JA.
    I'm following these commands but it is not available
    debug capwap console cli or debug lwapp console cli
I cannot proceed to convert it Did I miss something or the 2600 series doesn't support LWAPP convertion ?
thank you
Erik

Hi Erik,
Those commands aren;t going to work, they're debug commands for a lightweight AP.
Here is the guide to upgrading:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
It's pretty simple though, get the lightweight software follow the upgrade tool instructions to load new software.
Though, you have a newer AP so you'd be ok just to load the new software on, if it's only for a small amount this is fine.
Thanks
Chris

Converting AIR-LAP1131G-A-K9 to LWAPP

I noticed that this AP was $350 as compared to the AIR-LAP1131AG-A-K9 which is $450. The latter comes with an A radio which I don't need. But it comes shipped LWAPP which is good. Can I convert the cheaper one to LWAPP?
The models are:
http://www.cdw.com/shop/products/default.aspx?EDC=873163
http://www.cdw.com/shop/products/default.aspx?EDC=1386702

Sure you can. First, download the LWAPP image and do the following:
Autonomous to LWAPP (Shortcut)
Requirements:
â¢ Image file (The recovery file has the prefix ârcvâ in the image name, such as c1200-rcvk9w7-tar.122-15.JA.tar);
â¢ AP is connected to the Wireless LAN Controller; and
â¢ AP can ping the TFTP server where the image is located.
Procedure
1. Copy the recovery file to the AP using the following command:
archive tar /x tftp:/// flash:
2. Let the AP boot on this image:
boot system flash://.bin
3. Reboot the AP.
OPTIONAL
â¢ DO NOT ALLOW THE AP TO JOIN THE WIRELESS LAN CONTROLLER.
â¢ IF POSSIBLE, type the following commands:
ï¾ clear lwapp private-config (This will bring the AP to factory default.);
ï¾ clear lwapp ap ip address
ï¾ clear lwapp ap hostname
ï¾ clear lwapp ap controller ip address
4. Let the AP connect to the Wireless LAN controller.
OPTIONAL
If an AP refuses to join the Wireless LAN Controller, type the following command from the AP:
lwapp ap controller ip address
Does this help?

I would like to inquire how to use air 2.7 sdk in flash cs5.5.

I would like to inquire how to use air 2.7 sdk in flash cs5.5.
I have searched some solutions online and tried to copy air2.7 content in air2.6 folder(replaced the old one). I then did some efficiency tests but I don't see any improvements at all. Did I miss anything?
Besides that, There's a display ratio problem if I publish the ipa in landscape mode. I can't interact with the program either. But it is not a problem if the ipa is published in portrait mode.

http://forums.adobe.com/thread/864964?tstart=0

How to install AIR in Non-Admin rights PC ?

Who can teach me how to solve under issue ?
1.How to transfer AIR file to exe file
2.How to install AIR in Non-Admin rights computer?
-->In my company all PC has contorled, i want to install application in any Notebook for Sales Using,they can using AIR offline in anywhere
Thank you so much!!

On Mac OS, to install or update an AIR application, the user needs to have adequate system privileges to install to the application directory (and administrative privileges if the application needs to update the runtime). On Windows, a user needs to have administrative privileges.
IT administrators can install AIR applications silently using standard desktop deployment tools. For more information, see "Enterprise deployment" in the following page:
http://help.adobe.com/en_US/AIR/1.5/air_admin/WS5b3ccc516d4fbf351e63e3d11c0f5986ec-8000.ht ml#WS5b3ccc516d4fbf351e63e3d11c0f59823a-7fee

Problem Cisco AIR-LAP1131AG-E-K9 Ethernet LED = Off; Radio LED = RED ; Status LED = RED ;

hi,
I have a Cisco AIR-LAP1131AG-E-K9 when I boot one accesspoint it gives Ethernet LED = Off; Radio LED = RED ; Status LED = RED and only next listing in the screen:
Xmodem file system is available.
Flashfs[0]: unable to allocate available block.
The system has been interrupted, or encountered an error during initializion of the flash filesystem.
The foolowing commands will initialize the flash filesystem, and finish loading the operating system software:
flash_init
ether_init
tftp_init
boot
When I type this commands, it doesn't help at all. The output will be following:
ap: flash_init
Initializing Flash...
flashfs[0]: out of memory
...done Initializing Flash.
ap: ether_init
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ap: tftp_init
Unable to get our ip address: no "IP_ADDR" variable set
ap: boot
Loading ""...; permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
ap:
what i do ? please help , thanks

Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12154826/problem-cisco-air-lap1131ag-e-k9-ethernet-led-radio-led-red-status-led-red

CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red, what is this? it isn't in the manual

CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red in a pattern, red off then red red, Our AP isn't working it won't show up on our Cisco WLC 2125 anymore and this is the LED indicators, I've checked in the manual and this combination of LEDs do not exists??

No cisco web is working perfectly.
do you have a valid CCO id with smarnet contract ?? then only you can download new IOS for AP:
Autonomous AP image:
http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest
LAP AP image:
http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=280775090&release=12.4.25e-JAP&relind=AVAILABLE&rellifecycle=ED&reltype=latest
Regards

How to install Air 2.7 on mac ?

I had downloaded "AdobeAIRSDK.tbz2"
and what the next?
any steps will help me!

Thanks.
2011/9/21, chris.campbell <[email protected]>:
chris.campbell http://forums.adobe.com/people/chris.campbell created the
discussion
"Re: How to install Air 2.7 on mac ?"
To view the discussion, visit:
http://forums.adobe.com/message/3927906#3927906

How to Test AIR 1.5

Sorry if this seems slightly off center, but I blame Adobe, not myself. Trying to determine the true status and positioning of AIR amongst the various Flex forums and projects for an outsider is practically impossible. So, I will be brief. In September Mr. Chambers sent opened the flow by telling us that we could find FP10 integrated with Flex SDK in something you call 1.5 or Cosmo, or both. He was properly circumspect, so I didn't rush into it -- there was not even an ADL binary when I checked. Now it is November, the Trunk is at 4005, and ostensibly, everything we need to start trying to take advantage of FP support of 3D operations is out there. But where? Where do we get a version of AIR 1.5 that can be installed on a target desktop, so that we can try to run the ADT test cycle?
Call it Gumbo, call it Flex4, call it whatever, but can someone tell us how to start testing it for AIR application deployment?
Thank you.

<DIV>I am sure you are right about an AIR application being able to use Loader and SWFLoader. I hope I have more or less figured out the right way to do that. But, I guess my point is that none of the documentation I have been able to find anywhere would answer the question about what to do with the framework and/or rpc files. What, as far as you understand it, is the correct way to manage the use of the Aface=Arial size=2>dobe swz files in an AIR application?</DIV> <BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black">From: <A [email protected] href="mailto:[email protected]">Josh McDonald</A> </DIV> <DIV style="FONT: 10pt arial">To: <A [email protected] href="mailto:[email protected]">[email protected]</A> </DIV> <DIV style="FONT: 10pt arial">Sent: Monday, November 03, 2008 11:01 PM</DIV> <DIV style="FONT: 10pt arial">Subject: Re: How to Test AIR 1.5</DIV> <DIV> </DIV>A new message was posted by Josh McDonald in Developers -- How to Test AIR 1.5 I'm sure there's nothing stopping you from loading SWFs and SWZs and SWCs and loading them in AIR? Just treat them as normal files, and use whatever you please to push out updates etc? -Josh On Tue, Nov 4, 2008 at 4:53 PM, Terry Corbet <<A href="mailto:[email protected]">[email protected]</A>> wrote: <BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">A new message was posted by Terry Corbet in Developers -- How to Test AIR 1.5 01. Thanks, I will continue testing with ADL and hopefully be able to move up to a web-base, remote installation/update scenario in a couple of weeks. 02. I'm sorry you feel that my failure to accept what may be 'intuitively obvious to you' -- that I can design and test a 3D front end to FMS that works the same in a native window as in a browser window -- indicates any lack of faith in what will be delivered. So far, I have found subtle, important differences, and I am sure there will be others that will just have to be patiently tested before I get it right. 03. So, I'm glad you asked about swz in an AIR environment because that is a whole topic for which I have not been able to find any discussion on any of the many fine forums you have. I understand product marketing and product development, but I can't say that I ever managed those activities in the environment you have in which several large projects co-exist with lingering dependencies and even 'cultures' as diverse as you have with the various acquisitions that come together in the suite of products you have today. So, I will simply state that I think no one seems to have recognized that your paradigm for 'desktop' versus 'web-based' software -- the essential distinction which seems to describe Adobe's description of an AIR versus a Flex application -- does not always hold. I understand the general dichotomy, but it does not hold for my user base. You have lots of design papers and lots of software devoted to 'reducing the burden' of ever-growing executables in the Flex framework by caching of your or our rsls. That's a good idea. Why do you think it is not just as good an idea for an AIR application? Probably because you think that an AIR application will either be shipped on a CD, or sent over the Internet, but relatively infrequently, so who cares if you have to ship out 10MBs or 2MBs? My user cares. My user will get frequent updates to an ever-growing body of software called an application, and he will get them over those same slow bandwidth network links that the Flex user sees. What's "good for the goose is good for the gander". There is simply no reason not to architect the library of code that we use to cobble together the application and use the same intelligent caching mechanism in both environments. I looked for a month for a white paper or discussion of how to 'modularize' an AIR app but all that you wanted to publish were white papers on how to 'modularize' a Flex app. I'm sure that you guys have a bunch of object diagrams and product architecture blueprints that you have memorized -- but that is not what we see 'outside the black box'. What we see is a confusing distinction between the AIR efforts and the Flex efforts although the code base and efforts are substantially the same. And if that is true from an internals point of view, put on your end-user hat and look at how we view a AIR/Flex app -- it is all one. So, I develop the worlds greatest Juke Box and get it all going in Flex, then I move that into one Tab on one Screen in the AIR 'shell'. Then some guys go off and mostly use AIR-unique code to add a Tab that allows Drag and Drop creation of Slide Shows accompanied by voice overs, and another set of my guys go off to add the 'Sudoku' module in just plain old Flex. At some point in time in some ant task, we've got 10MB of code and X MBs of that is in one of our present [or future] swz files. Where is the distinction that says I should just ask my users to download the whole shooting match, when what he really wants to do is just download whatever updated or new application modules [including any upgrades to your frameworks] when required. So, it took some time, but today, my application is compiled with dynamic linking to the framework.swz, and when the user launches his AIR application on the desktop, the Flash Player, embedded in the AIR environment, is smart enough to find that it already has the necessary framework code and does not need to go back to the network to get it refreshed. Actually, since I could never figure out how to use Module and ModuleManager, the method for solving the framework caching problem ended up just being an extension of what I developed for version management 'with continuous update' of my own swf files. So, when the AIR shell starts up, it needs to test to see whether there is any updating to be done, or whether it already has locally available the 'latest and greatest' and that works the same for MyCute3DWizBang.swf or framework_3.1.0.2710.swz or framework_4.0.0.3988.swf. If you take the point of view that a 'desktop application' doesn't need to do anything special to solve the problem of 'large file downloads', you end up thinking that there is no reason for an AIR application to take advantage of the frameworked cache when, in fact, almost all of that code is needed whether the execution thread starts in a 'WindowApplication' or just a plain old 'Application'. At least thats the cockamaymee point of view that I came to in the absence of any 'best practice' discussion of these key topics -- so far, it seems to be working pretty well, but as you can guess, testing across a network to a remote host that may or may not have the right version of AIR, or the right version of framework, or the right version of MyCute3DWizBang is really more important than just testing against ADL. ----- Original Message ----- From: "Matt Chotin" <<A href="mailto:[email protected]" target=_blank>[email protected]</A>> To: <<A href="mailto:[email protected]" target=_blank>[email protected]</A>> Sent: Monday, November 03, 2008 8:39 PM Subject: Re: How to Test AIR 1.5 <BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">A new message was posted by Matt Chotin in Developers -- How to Test AIR 1.5 The badge install doesn't work with debug, you can only use adl.exe right now. But this should show how the whole system would work and really allow you to evaluate. You know how the AIR install works with Air 1.1 (if not, use Flex 3.1 to target 1.1), I don't think seeing it with AIR 1.5 is critical to evaluate the features of the runtime at this point. Air and the Flash Player are runtimes, and we've made it clear that AIR 1.5 would include FP10 features. So when we say Flex will enable FP10, it should be obvious that when AIR 1.5 comes out Flex will support it in the same way. I don't really understand what you're doing with the SWZ and AIR, there's no real need to use a cached framework when the whole app is going to be installed. In any case, Air 1.5 should be out in 2 weeks hopefully so you'll be set then. Matt On 11/3/08 8:07 PM, "Terry Corbet" <<A href="mailto:[email protected]" target=_blank>[email protected]</A>> wrote: A new message was posted by Terry Corbet in Developers -- How to Test AIR 1.5 Thanks for the quick turnaround. Pardon my ignorance, but exactly what .exe file will install Air 1.5 on a system? I don't find it anywhere. I guess I can try to tear the ADL source apart to see how it mimics that behavior, but that is, at best, just a local test. I think testing the whole Badge install sequence is essential, and would like to give it a try. The longer we put this off, the longer we all just sit here trying to decide whether to stay with Papervision, Away, Sandy, or to use the graphics support in the Player. I am busy making the dynamic link to the framework.swz work for Flex modules running under an AIR shell, and I doubt that I am alone. There must be many of us who really see no distinction between AIR and Flex -- they just provide us two different ways to slice a problem, that's why it is so disconcerting to try to follow the threads on rapid Flex advancement with FP 10, but almost nothing pertaining the doing the very same things with the AIR toolkit. I hope you can tell me where to get the standalone AIR 1.5 installer that will me keep making progress with the debugging output reasonably well handled by Allesandros' FireFox tracer. Many thanks. ----- Original Message ----- From: "Matt Chotin" <<A href="mailto:[email protected]" target=_blank>[email protected]</A>> To: <<A href="mailto:[email protected]" target=_blank>[email protected]</A>> Sent: Monday, November 03, 2008 7:55 PM Subject: Re: How to Test AIR 1.5 <BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">A new message was posted by Matt Chotin in Developers -- How to Test AIR 1.5 Hi, We're not doing a public beta of the release runtime for AIR 1.5. You can use the debug runtimes that are part of the Flex nightly builds though (check the Flex 3 nightlies) to validate that AIR 1.5 will be right for you though. Matt On 11/3/08 7:38 PM, "Terry Corbet" <<A href="mailto:[email protected]" target=_blank>[email protected]</A>> wrote: A new discussion was started by Terry Corbet in Developers -- How to Test AIR 1.5 Sorry if this seems slightly off center, but I blame Adobe, not myself. Trying to determine the true status and positioning of AIR amongst the various Flex forums and projects for an outsider is practically impossible. So, I will be brief. In September Mr. Chambers sent opened the flow by telling us that we could find FP10 integrated with Flex SDK in something you call 1.5 or Cosmo, or both. He was properly circumspect, so I didn't rush into it -- there was not even an ADL binary when I checked. Now it is November, the Trunk is at 4005, and ostensibly, everything we need to start trying to take advantage of FP support of 3D operations is out there. But where? Where do we get a version of AIR 1.5 that can be installed on a target desktop, so that we can try to run the ADT test cycle? Call it Gumbo, call it Flex4, call it whatever, but can someone tell us how to start testing it for AIR application deployment? Thank you. ________________________________ View/reply at How to Test AIR 1.5 <<A href="http://www.adobeforums.com/webx?13@@.59b6ed86" target=_blank>http://www.adobeforums.com/webx?13@@.59b6ed86</A>> Replies by email are OK. Use the unsubscribe <<A href="http://www.adobeforums.com/webx?280@@.59b6ed86%21folder=.3c060fa3" target=_blank>http://www.adobeforums.com/webx?280@@.59b6ed86!folder=.3c060fa3</A>> form to cancel your email subscription. ------------------------------------------------------View/reply at <<A href="http://www.adobeforums.com/webx?13@@.59b6ed86/0" target=_blank>http://www.adobeforums.com/webx?13@@.59b6ed86/0</A>> Replies by email are OK. Use the unsubscribe form at <<A href="http://www.adobeforums.com/webx?280@@.59b6ed86%21folder=.3c060fa3" target=_blank>http://www.adobeforums.com/webx?280@@.59b6ed86!folder=.3c060fa3</A>> to cancel your email subscription. </BLOCKQUOTE> ----------------------------------------------- ------- View/reply at <<A href="http://www.adobeforums.com/webx?13@@.59b6ed86/1" target=_blank>http://www.adobeforums.com/webx?13@@.59b6ed86/1</A>> Replies by email are OK. Use the unsubscribe form at <<A href="http://www.adobeforums.com/webx?280@@.59b6ed86%21folder=.3c060fa3" target=_blank>http://www.adobeforums.com/webx?280@@.59b6ed86!folder=.3c060fa3</A>> to cancel your email subscription. ------------------------------------------------------ Vi ew/reply at <<A href="http://www.adobeforums.com/webx?13@@.59b6ed86/2" target=_blank>http://www.adobeforums.com/webx?13@@.59b6ed86/2</A>> Replies by email are OK. Use the unsubscribe form at <<A href="http://www.adobeforums.com/webx?280@@.59b6ed86%21folder=.3c060fa3" target=_blank>http://www.adobeforums.com/webx?280@@.59b6ed86!folder=.3c060fa3</A>> to cancel your email subscription. </BLOCKQUOTE> ------------------------------------------------------ Vi ew/reply at <<A href="http://www.adobeforums.com/webx?13@@.59b6ed86/3" target=_blank>http://www.adobeforums.com/webx?13@@.59b6ed86/3</A>> Replies by email are OK. Use the unsubscribe form at <<A href="http://www.adobeforums.com/webx?280@@.59b6ed86%21folder=.3c060fa3" target=_blank>http://www.adobeforums.com/webx?280@@.59b6ed86!folder=.3c060fa3</A>> to cancel your email subscription. </BLOCKQUOTE> -- "Therefore, send not to know For whom the bell tolls. It tolls for thee." Like the cut of my jib? Check out my Flex blog! :: Josh 'G-Funk' McDonald :: 0437 221 380 :: <A href="mailto:[email protected]">[email protected]</A> :: <A href="http://flex.joshmcdonald.info/">http://flex.joshmcdonald.info/</A> :: <A href="http://twitter.com/sophistifunk">http://twitter.com/sophistifunk</A> <HR align=left width=200> View/reply at <A href="http://www.adobeforums.com/webx?13@@.59b6ed86/4">How to Test AIR 1.5</A> Replies by email are OK. Use the <A href="http://www.adobeforums.com/webx?280@@.59b6ed86!folder=.3c060fa3">unsubscribe</A> form to cancel your email subscription. </BLOCKQUOTE>

AIR-LAP1131AG issue

I've connected an AIR-LAP1131AG to a 3560G and can see the port being granted power in the logs but nothing else - nothing in CDP, port is showing as down/down. The Status LED on the top of the AP is showing as blue/green, which according to the docs means it's initializing the Flash filesystem, but it just sits there. I've installed 12 APs and two of them have this issue. I know they all worked a few weeks back because i upgraded the software on them to 7.0.98.0 before shipping them to site.
Any ideas as to what could be the cause? Could it be a cabling issue? These two APs are on the same floor of a building and i'm wondering if the cabling has been botched. I can't imagine both of them developing a hardware fault, but the status LED may suggest otherwise. Any thoughts appreciated.
Thanks in advance,
Jason

That did the trick! See below - good port on both switches followed by the APs on g0/48... Thanks for your help!
SW13#show cable-diagnostics tdr int g0/1
TDR test last run on: April 03 14:23:31
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/1     1000M Pair A     21   +/- 4 meters Pair A      Normal
                Pair B     21   +/- 4 meters Pair B      Normal
                Pair C     21   +/- 4 meters Pair C      Normal
                Pair D     19   +/- 4 meters Pair D      Normal
SW13#show cable-diagnostics tdr int g0/48
TDR test last run on: April 03 14:23:35
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/48    auto Pair A     46   +/- 4 meters N/A         Open
                Pair B     68   +/- 4 meters N/A         Normal
                Pair C     102 +/- 4 meters N/A         Fail
                Pair D     110 +/- 4 meters N/A         Fail
SW14#show cable tdr int g0/1
TDR test last run on: April 03 14:24:56
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/1     1000M Pair A     22   +/- 4 meters Pair A      Normal
                Pair B     21   +/- 4 meters Pair B      Normal
                Pair C     21   +/- 4 meters Pair C      Normal
                Pair D     22   +/- 4 meters Pair D      Normal
SW14#show cable tdr int g0/48
TDR test last run on: April 03 14:24:59
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/48    auto Pair A     46   +/- 4 meters N/A         Open
                Pair B     68   +/- 4 meters N/A         Normal
                Pair C     98   +/- 4 meters N/A         Fail
                Pair D     102 +/- 4 meters N/A         Fail

Reflashing AIR-LAP1131AG-N-K9 to use all US channels

Is the hardware between the AIR-LAP1131AG-N-K9 unit and the AIR-LAP1131AG-A-K9 common, and if so, can these be reflashed in the field? If not, can the N version work in the US and if so what are the capabilities you lose (I assume some/all 11a channels, but would like something more definite)?
Thanks,
Alan

LAPs from different regulatory domains will not inter-operate. The WLCs and LAPs have to be of the same regulatory domain. And I don't think the LAPs of different regulatory domains can be re-flashed.

AIR-LAP1131AG-N-K9 getting failed repeatedly

Hi Experts,
we are having more than 250 - AIR-LAP1131AG-N-K9 access point installed,
We are facing issue in access point which SN is starting from FTX1216, its getting failed and not starting by PoE or power adaptor (dead)
i analyzed all these failed access points and found that a copper metal foil which covered on some part on PCB of Access point is half removed. and all this access points are 3 to 4 Years older. is there any way to stop such failures.
find attachted snap shot.

Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Please don't forget to rate our useful posts. Thanks.

How to convert AIR-AP1131AG to AIR-LAP1131AG

Similar Messages

Maybe you are looking for