How to convert an array of bits into an array of bytes?

If I have an array of 1s and 0s, how can I pack them
into an array of bytes (8 bits)?
Thanks.

NI recommends to get rid of 4.x mode (Quote from the help file: "National Instruments recommends reworking any application that uses the Convert 4.x Data mode as a long term solution."). For this reason, I have attached an alternative example to give you some ideas.
(The previous example (using 4.x type cast) is actually slightly flawed, because for some reason it only produces even sized output arrays (why???) so you would need to trim the resulting array as a function of the input array size.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
OnesAndZeroesU8v2.vi ‏43 KB

Similar Messages

How can I convert an array off byte into an Object ?

Hi folks...
I�m developing an application that comunicates a PDA and a computer via Wi-Fi. I�m using a DataStream ( Input and Output ) to receive / send information from / to the computer. Most off the data received from him is in the byte[] type...
How can I convert an array off byte ( byte[] ) into an Object using MIDP 2.0 / CLDC 1.1 ?
I found on the web 2 functions that made this... but it uses a ObjectOutputStream and ObjectInputStream classes that is not provided by the J2ME plataform...
How can I do this ?
Waiting answers
Rodrigo Kerkhoff

There are no ObjectOutputStream and ObjectInputStream classes in CLDC. You must know what you are writing to and reading from the DataStream. You should write the primitives like int, String to the DataOutputstream at one end and read those in exactly the same sequence at the outher end using readInt(), readUTF() methods.

How to convert Oracle reports previewer output into delimited file.

How to convert Oracle reports previewer output into delimited file if the report has more than 1000 pages.
I tried with previewer option File --> Generate to file --> Delimited file, but the report engine is crashing.Not generating .TXT file.
I observed that this option is not working for more than 400 pages.
I am using Oracle reports 6i version.
Plz suggest me to generate .TXT file from Report previewer.

You can specify a delimiter (a character or string of characters) to separate the data (boilerplate or field objects) in your report output in either of the following ways:
On the command line using the DELIMITER keyword.
In the Delimited Output dialog box or DelimitedData Output dialog box (displayed with File > Generate to File > Delimited or File > Generate to File > DelimitedData) in Reports Builder.
for further information goto this link
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_concepts2.htm#sthref760

[Oracle 8i] How to convert a string (time stamp) into a date?

I'm having difficulty figuring out how to convert a time stamp string into a date (or possibly a number).
The time stamp is 20 positions, character (NOT NULL, CHAR(20))
in the format: YYYYMMDDHHMMSSUUUUUU
where Y = Year, M = Month, D = Day, M = Minutes, S = Seconds, and U = Microseconds
The reason I want to convert this is so that I can compare one time stamp to another (i.e. I want to be able to find the MIN(timestamp), MAX(timestamp), and do inequality comparisons).
Is this at all possible?
Thanks in advance for help on this!

Hi,
As Damorgan said, if all you want to do is find which is the earliest or latest, then you can just compare the strings: they happen to be in a format where that works.
If you need to do other things, such as compare them to today's date, or see the difference between two of your rows in days, then you have to convert them to DATEs. (There's no point in converting them to NUMBERs).
A new data type, TIMESTAMP, which handles fractions of a second, was introduced in Oracle 9.
Since you're using Oracle 8 (according to your subject line), you either have to
(1) ignore the microseconds, or
(2) use a separate NUMBER column for the microseconds.
Either way, use TO_DATE to convert the first 14 characters to a DATE:
TO_DATE ( SUBSTR (txt, 1, 14)
, 'YYYYMMDDHH24MISS'
)where txt is your CHAR column.
To convert the microseconds to a number (between 0 and 999999):
TO_NUMBER (SUBSTR (txt, 15))

How to convert JSR-168 compliant Portlets into SAP iviews

Hi All,
Its very urgent requirement for me...
<b>How to convert JSR-168 compliant Portlets into SAP Enterprise Portal supported iViews in SAP NetWeaver 2004 or 2004s.</b> Can you please tell me any tools are available for conversion or is there any another procedure to achieve this problem.
At last can we ach
Each answer will be awarded with points.
Regards
Sreedhar G

Hi Sreedhar,
Is there anyway to display Standard Business packages content in IBM websphere portal.If there is anyway please let me know.
thanks,
Anil

How to convert 1D array of string to string

How to convert 1D array of string to string.

Maximus00, as Pavel indicated, there is a lesser known feature of "Concatenate Strings" that does exactly what your code is doing if the input is an array of strings. In one step! See attached image.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ConcatenateArray ofStrings.gif ‏7 KB

How to convert an html/css website into muse

How to convert an html/css website into muse.

Hi,
It is not possible to convert html/css site into Muse. Muse recognizes .muse files only.
Regards,
Aish

How to convert JSR 168 compliant Portlets into SAP supported iViews.

Hi,
How to convert JSR 168 compliant Portlets into SAP supported iViews in SAP NetWeaver 2004.
Thanks & Regards
Siva

Guys,
JSR is not supported untill NW05. Please check this
/thread/176954 [original link is broken]
Akhilesh

How to convert from array to graph ?

how to convert from array to graph ?

A graph will accept an array of numbers. Do you have an example of what you are looking for?
And since somebody mentioned tutorials...
3 Hour Introduction
6 Hour Introduction
LabVEW Basics
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Learning NI
Getting Started with NI Products
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Hi, can anyone guide me how to convert Freehand MX for PC into Mac Version?

Hi, can anyone guide me how to convert Freehand MX for PC into Mac Version?

You can upgrade to Mavericks free, just run the App Store program and search for Mavericks. But before you do upgrade I recommend the following:
1) make sure you have a recent backup. TimeMachine is fine.
2) Mavericks is somewhat more memory hungry than 10.7 was. You will need 4 GB of RAM and I strongly recommend 8 GB.
Go back to the Apple menu and select About this Mac - look under the OS info you just looked at. You'll see how much RAM your computer has now. Then click on the More Info button. There you will see your computer info listed as in: iMac, 21.5" mid 2010, for example. Return back with that information and we can tell you how far the computer can be upgraded.
If you decide to procede and you have enough RAM upgrading to Mavericks is quite simple. Click on the download button and let it do its job.

How do I convert an array of BYTES (where each BYTE represents a bit) into a single Hex number?

I am reading a signal from a USB-8451. This signal is stored as an array where each element represents a bit in the signal, but is stored in the array as a byte. How do I convert this array into a single Hex number. I attatched what I have so far, there are a few extra things to help me see what ia going on. One code uses Queue and the other uses arrays, let me know if you can help.
Attachments:
845x_EEPROMarrays.vi ‏27 KB
845x_EEPROM.vi ‏26 KB

mkssnwbrd wrote:
... so we can't introduce any other forms of signals or power into the circuit other than what the circuit already has. Trithfully I don't really know how I2C devices work, but my mentor here says that we can't use an I2C method becuase it will introduce voltage into the circuit and may damage out TCON chip.
That makes absolutely no sense. What do you think is happening when you write the digital lines? You're setting a pin high. That voltage is being generated by the 8451x. I think you're not understanding what your mentor is saying. If it's an I2C device then you should be able to use the I2C function to simply talk to it. You still have not indicated what the device is, so there's little more I can say about that aspect of it.
As far as the conversion is concerned, you basically need loop through your array of "bits", taking 16 at time since you said you have 16-bit values. It's not clear from your code whether your eventual goal is to get a numeric value or a string. This does not appear to be a subVI, so a simply numeric indicator formatted to display in hex format should be quite adequate. The array you are generating is an array of rings, whose datatype is I32, but they will have values of 0 or 1. You can use the example just posted, or you can use the attached variation.
Attachments:
Bits to Hex 2.vi ‏17 KB

How to convert an array of numbers into a time signal?

I have an array of 512 data points. I want to convert this array into a time domain signal (the one with the brown color). How would I do this? Please let me know soon...Thanks!

If you are referring to waveform data type, use the "build waveform" function as illustrated in the attached vi. Also check LabVIEW help waveform example for more sample vi.
Attachments:
sample_vi.vi ‏30 KB

How to convert an array collection instance to a complex object for interaction with webservice

Hi there,
I have a stubborn problem that I am trying to work out the best way to solve the problem. I am interacting with a WebService via HTTPService calling a method called find(String name) and this returns me a List of ComplexObjects that contain general string and int params and also lists of other Complex Objects. Now using the code:
ArrayCollection newOriginalResultsArray = new ArrayCollection(event.result as Array)
flex converts my complex objects results to an arraycollection so that I can use it in datagrids etc. Now up until this part is all good. My problem is when getting a single instance from the results list, updating it by moving data around in a new datagrid for example - I want to interact with the webservice again to do an create/update. This is where I am having problems - because these webservice methods require the complex object as a parameter - I am struggling to understand how I can convert the array collection instance back to my complex object without iterating over it and casting it back (maybe this is the only way - but I am hoping not).
I am hoping that there is a simple solution that I am missing and that there is some smart cookie out there that could provide me with an answer - or at least somewhere to start looking. I guess if I have no other alternative - maybe I need to get the people who built the service to change it to accept an array - and let them do the conversion.
Any help would be greatly appreciated.
Bert

Hi Bert,
According to my knowledge you can use describeType(Object) method which will return an XML... That XML will contain Properties and values just iterate through the XML and create a new Object..   Probably u can use this method...
public function getObject(reqObj:Object,obj:Object,instanceName:String,name:String=null,index:int=-1):Obj ect
            if(!reqObj)
                reqObj = new Object();
            var classInfo:XML = describeType(obj);
            var className:String = instanceName;
            if(name!=null)
                className=name+"."+className;
            if(index!=-1)
                className=className+"["+index+"]";
            for each (var v:XML in classInfo..accessor)
                var attributeName:String=v.@name;
                var value:* = obj[attributeName]
                var type:String = v.@type;
                if(!value)
                    reqObj[className+"."+attributeName] = value;
                else if(type == "mx.collections::ArrayCollection")
                    for(var i:int=0;i<value.length;i++)
                        var temp:Object=value.getItemAt(i);
                        getReqObject(reqObj,temp,attributeName,className,i);
                else if(type == "String" || type == "Number" || type == "int" || type == "Boolean")
                    reqObj[ className+"."+attributeName] = value;
                else if (type == "Object")
                    for (var p:String in value)
                        reqObj[ className+"."+attributeName+"."+p] = value[p];
                else
                    getReqObject(reqObj,value,attributeName,className);
            return reqObj;
Thanks,
Pradeep

How to convert the alv list data into pdf format

Hi Expersts,
Is it possible to convert the alv list output data into PDF format? if yes, then please help me with this issue.
thanks in advance,
Regards,
Samad

hii samad,
you can go through these link.i hope it ll solve your purpose
How to convert list output to PDF
Display ALV list output in PDF format
regards,
Shweta

How to convert the x/y pixel into Lat/Lon?

Does anyone know how to covert the X/Y coord into Lat?lon coord system? What is the formular?
Thanks!!!
Ming

Depends on the projection your map is using.

How to convert an array of bits into an array of bytes?

Similar Messages

Maybe you are looking for