How to convert AVCHD.

Hi , i have some m2ts ( AVCHD ) files on my computer but can´t import them to iMovie . What should i do ? I d´ont want to buy a converter.

You could likely create a disk image of the camera, but I don't believe this is possible with just the AVCHD files, you'll need all the other stuff that is held on the camera HDD.

Similar Messages

  • How to convert AVCHD files on a PowerMac G5?

    I have recently bought a Powermac G5 to use for editing my videos, as my Macbook 2005 is on it's last legs.
    The only problem is i didn't realise how much trouble i would get myself into in terms of compatability. I need to convert AVCHD to MPEG so i can import my clips into iMovie or Final Cut.
    I read in another discussion that VoltaicHD would solve this problem, and does work on PowerPC Processors, but it keeps telling me it is not supported on this architecture.
    Any help would be much appreciated. Cheers, Oli

    OliJenkins wrote:
    I have recently bought a Powermac G5 to use for editing my videos, as my Macbook 2005 is on it's last legs.
    The only problem is i didn't realise how much trouble i would get myself into in terms of compatability. I need to convert AVCHD to MPEG so i can import my clips into iMovie or Final Cut.
    I read in another discussion that VoltaicHD would solve this problem, and does work on PowerPC Processors, but it keeps telling me it is not supported on this architecture.
    Any help would be much appreciated. Cheers, Oli
    Hopefully you did not pay much money for a Powermac G5...
    At the end of the day, unless your time and effort has no value monetarily, you will watch endless while this ancient machine tries to transcode AVCHD video.
    The time needed on even the slowest and least expensive of modern Macs (Mac Mini) will be amazing!
    When my iMac G5 died, I replaced it with the 2011 Mac Mini and now I do ALL my transcoding on this machine; what a difference!
    To answer the remainder of your question: what purpose do you need MPEG video for?  Do you mean MPEG-2 for creation of DVDs?
    In any event the current version of Handbrake (running on a modern Mac) will handle most anything that you need other than DVD creation.

  • How to convert AVCHD for use on ipad

    Is there a free convertor for mac to convert AVCHD to the format needed for ipad?? i want to try editing with reeldirector on my ipad, i then need to import it to my ipad is the camera kit the only option?

    The Mac application Handbrake should work. It is "free" open source.

  • How to convert avchd footage when it's on your hard drive in your computer?

    hey guys, I have a problem. I have a Sony Hdr-sr7 hard drive avchd camcorder and I can convert the footage to pro res just fine when i plug in my camera via usb. but when I download the avchd files (.mts .mt2s) to my mac hard drive I'm not able to convert then in the L&T window in FCP. Can you help me here? I have never been able to figure it out.
    Thanks.

    For L&T to recognise the AVCHD files, you need to preserve the full directory structure of the camera when you copy the footage to your Mac i.e. don't just copy across the folder which contains the AVCHD files.
    Assuming you have the full directory structure in place on your Mac, point L&T to the top level directory.
    There are also alternatives to L&T which don't require the full directory structure to be in place.
    Toast9/10
    Voltaic
    VideoPier
    Frank

  • How to convert MPG?

    how to convert MPG videos? so i can use it on imovie.

    The formats which iMovie supports include: 3GP,MOV and MP4, M4V, H.264, AVCHD, DV
    You can use handbrake or enolsoft video converter to convert it to iMovie supported video formats.

  • How to import avchd in imovie

    How to import 1080P AVCHD content in Imovie 11 ?

    Situation 1 Does iMovie 10 for Mac support AVCHD files?
    Though the new iMovie 10.0 for Mac OS X Mavericks/Yosemite claims the native support for AVCHD, its support for AVCHD is just the same as iMovie 11: iMovie can import and edit native AVCHD in 1080i 50/60, 720p 24/25/30, 1080p 24/25/30, but iMovie does not support AVCHD 1080p 50/60 or 720p 60.
    That is, you will still fail to import AVCHD to iMovie 10/11/09/08/HD if the AVCHD footage recorded at 1080/60p, 1080/50p or 720/60p with whatever model of cameras or camcorders like Panasonic Lumix DMC, Panasonic HDC series, Canon XA20, Pana TZ7, Sony Alpha DSLR(SLT) Cameras, Sony HDR-PJ790 and etc.
    Situation 2 Can iMovie for iOS iPad, iPhone or iPod import AVCHD?
    The short answer is no. Normally, iMovie for iPad, iPhone or iPad only works with the video files recorded by the iOS devices in MP4, MOV or M4V format. And iMovie for iOS will not import AVCHD footages recorded with other cameras or camcorders.
    In order to successfully import all kinds of AVCHD to iMovie for Mac or iOS, a recommended solution is convert AVCHD to iMovie more supported video format.
    Hope it will help you more or less.

  • How to convert MP4?

    Emicsoft MP4 Converter for Mac can convert from MP4 to other video/audio formats on mac os x. With this Mac MP4 Converter, you are able to convert MP4 to AVI, MP4 to FLV, MP4 to MPEG and also to more popular formats such as MOD, TOD, MKV, WMV, DivX, XviD, MOV, MPEG1/2, 3GP, VOB, HD MP4, HD MOV, HD AVI, HD MP4, etc. Emicsoft MP4 Converter for Mac also can help you extract audio track from MP4 video to MP3, WMA, WAV, AAC, AC3 and so on.
    How to convert MP4 Mac?
    1. Click "Add File" button to load video file to the mp4 converter for mac.
    2. Click "Effect" "Trim" and "Crop" button to edit the video file.
    3. Set output profile and destination folder for the output file.
    4. Start conversion by clicking "Start" button.
    Now, it is no longer a problem to convert mp4 on Mac os x. Users can take full advantage of this Emicsoft MP4 Converter for Mac and create unique videos at ease.
    Emicsoft MKV Converter for Mac supports converting from MKV to all popular video and audio formats including MPEG-4, AVI, DivX, XviD, MOD, FLV, WMV, 3GP, MOV, HD video and MP3, WMA, WAV, AAC, AC3, etc. This outstanding mac MKV converter os x works to convert MKV and convert to MKV reversely. Another attracted feature is to convert MKV to iPod, iPhone, Apple TV, PSP, PS3, Zune and more multimedia devices.
    Emicsoft MTS Converter for Mac is an featured Mac AVCHD MTS video Converter. MTS Converter OS X is a macintosh software that help convert Mac MTS videos to other Mac video and audio formats such as MP4, M4V, MOV, QuickTime format, FLV, AVI, 3GP, MPG, MPEG2, MPEG1, MP3, WAV, AC3, OGG and APE.

    Why Convert MP4 to MP3?
    Reason one: Some old music players don't support MP4 format  but are compatible with MP3 format, so people have to extract the audio  tracks from MP4 clips and then save them as MP3.
    Reason two: People are intent to DIY a video. To use the music from one video in another video, they need to extract audio from video.
    Reason three: Download a video in MP4 format but only want the audio of the video.
    Here is a step by step guide to help you convert MP4 to MP3 with 30X faster speed and high output quality at: Convert MP4 to MP3

  • How  to  convert  mkv for Mac ?

    Emicsoft MP4 Converter for Mac can convert from MP4 to other video/audio formats on mac os x. With this Mac MP4 Converter, you are able to convert MP4 to AVI, MP4 to FLV, MP4 to MPEG and also to more popular formats such as MOD, TOD, MKV, WMV, DivX, XviD, MOV, MPEG1/2, 3GP, VOB, HD MP4, HD MOV, HD AVI, HD MP4, etc. Emicsoft MP4 Converter for Mac also can help you extract audio track from MP4 video to MP3, WMA, WAV, AAC, AC3 and so on.
    How to convert MP4 Mac?
    1. Click "Add File" button to load video file to the mp4 converter for mac.
    2. Click "Effect" "Trim" and "Crop" button to edit the video file.
    3. Set output profile and destination folder for the output file.
    4. Start conversion by clicking "Start" button.
    Now, it is no longer a problem to convert mp4 on Mac os x. Users can take full advantage of this Emicsoft MP4 Converter for Mac and create unique videos at ease.
    Emicsoft MKV Converter for Mac supports converting from MKV to all popular video and audio formats including MPEG-4, AVI, DivX, XviD, MOD, FLV, WMV, 3GP, MOV, HD video and MP3, WMA, WAV, AAC, AC3, etc. This outstanding mac MKV converter os x works to convert MKV and convert to MKV reversely. Another attracted feature is to convert MKV to iPod, iPhone, Apple TV, PSP, PS3, Zune and more multimedia devices.
    Emicsoft MTS Converter for Mac is an featured Mac AVCHD MTS video Converter. MTS Converter OS X is a macintosh software that help convert Mac MTS videos to other Mac video and audio formats such as MP4, M4V, MOV, QuickTime format, FLV, AVI, 3GP, MPG, MPEG2, MPEG1, MP3, WAV, AC3, OGG and APE.

    I have just asked a question about downloading MacKeeper elsewhere - why do you say not to download it? Does it not work or is it malicious?
    Do you have any others suggestions for cleaning up my laptop and desktop? Both running OS 10.6.8 and both seem a bit slow to me, especially when I have multiple applications open.
    Thanks

  • How to convert .mts file to Adobe Premiere?

    I shoot my family party with my Sony HDR-XR500V with the output video format of .MTS . I tried to do some editing on Adobe Premiere Pro CS4. But it does not support mts file. I have made some searches ,and i found that the Adobe Premiere Pro CS4 can edit the file formats of mpeg2 and avi. So i am wondering how to convert mts file to mpeg2 and avi for me to edit on Adobe Premiere Pro CS4? what software and programme should i need.and where can i get it. Thanks.

    As long as you have a AVCHD converter, you can use almost any editing software to edit and perfect your MTS/M2TS video files. What you should do is converting AVCHD video files into the video formats editable by editing software you are using.
    As for this question, you can convert MTS from your HD camcorder to MPEG 2,MOV or AVI supportable by Adobe Premiere.
    I recommend Brorsoft MTS/M2TS Converter for Mac which is the fastest and best quality video converter i ever used.It can help you to convert MTS/M2TS recording to some playable and editable video formats, like MOV for editing on iMovie,FCP,FCE and Adobe Premiere you are using.
    I ever used some video converter which produces video files with the issue of video and audio out of sync, but Brorsoft works fine in this point.
    NiCE TOOL.
    http://www.brorsoft.com/mts-converter-mac/index.html

  • How to convert class file

    Hi all, I am new in java card development.
    This is my environment setting:
    @echo off
    set JC_HOME=C:\JavaCard\java_card_kit-2_2
    set JAVA_HOME=C:\j2sdk14103
    set PATH=.;%JC_HOME%\bin;%PATH%
    I have created the Wallet applet according to 'Zhiqun Chen" text book and named it WalletApp.java.
    I have compiled this file to a class file.
    This is where is I saved my file
    C:\JavaCard\java_card_kit-2_2\samples\src\com\sun\javacard\samples\WalletApp\WalletApp.java.
    But I don't really understand how to convert the class file.
    May I know what is this for?
    -out EXP JCA CAP
    -exportpath
    -applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1
    com.sun.javacard.samples.HelloWorld.HelloWorld
    com.sun.javacard.samples.HelloWorld
    0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
    must save this in what file?
    I tried to type in the command line below (and the result):
    C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sap
    les\Wallet\Wallet.opt
    error: file scr\com\sun\javacard\saples\Wallet\Wallet.opt could not be found
    Usage: converter <options> package_name package_aid major_version.minor_ver
    sion
    OR
    converter -config <filename>
    use file for all options and parameters to converter
    Where options include:
    -classdir <the root directory of the class hierarchy>
    set the root directory where the Converter
    will look for classes
    -i support the 32-bit integer type
    -exportpath <list of directories>
    list the root directories where the Converter
    will look for export files
    -exportmap use the token mapping from the pre-defined export
    file of the package being converted. The converter
    will look for the export file in the exportpath
    -applet <AID class_name>
    set the applet AID and the class that defines the
    install method for the applet
    -d <the root directory for output>
    -out [CAP] [EXP] [JCA]
    tell the Converter to output the CAP file,
    and/or the JCA file, and/or the export file
    -V, -version print the Converter version string
    -v, -verbose enable verbose output
    -help print out this message
    -nowarn instruct the Converter to not report warning messages
    -mask indicate this package is for mask, so restrictions on
    native methods are relaxed
    -debug enable generation of debugging information
    -nobanner suppress all standard output messages
    -noverify turn off verification. Verification is default
    *********************************************************May I know What is the correct command line to convert the class file and what must I do to before converting the class file?
    I saw some article saying we must use JDK1.3, is it a must?
    Your solution is highly appreciated.
    Thank you!

    Hi Ricardo,
    I saved the file below as WalletApp.opt in the directory of scr\com\sun\javacard\samples\WalletApp
    -out EXP JCA CAP
    -exportpath c:\javacard\java_card_kit-2_2\api_export_files
    -applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2:0x1 WalletApp.WalletApp
    WalletApp 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2 1.0
    But I still have the problem below:
    C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sam
    ples\WalletApp\WalletApp.opt
    error: file scr\com\sun\javacard\samples\WalletApp\WalletApp.opt could not be fo
    und
    Usage: converter <options> package_name package_aid major_version.minor_ver
    sion
    OR
    converter -config <filename>
    May I know What's wrong with my command or file?
    Where can I download JDK because what I can find is J2SDK.
    Thank you!

  • How to convert string to 16 characters.

    My external unique id is too long, more then 30 characters.
    How to convert it to 30 characters using sql?

    You should find another extranal system id in order to mantain uniqueness, but you could also use the name field (that supports 50 characters), but it deppends of which entity you are using.
    Which is the entity? and...if the only way to insert data is by web services the you could use more than one field to verify uniqueness since you can query more than one field at the time.
    Hope it helps
    Kim.

  • How to convert Web app into a channel?

    To whom it may concern,
    Does anyone know how to convert a Web app into a channel inside the Portal server 6.0?
    I developed the web app and tried to create a provider and a channel for it, but the Portal server did not recognize the WEB-INF folder and give me errors saying that it couldn't locate the class files.
    I also have a problem with URL inside my jsp page (channel).
    For example, I have two jsp pages:
    /etc/opt/SUNWps/desktop/default/MyCustomProvider/test1.jsp
    /etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
    and when I try to put a link from test1.jsp to test2.jsp using
    ... and make a channel based on test1.jsp. The channel will display the link as "http://mydomain/portal/test2.jsp" and result in "Error: page not found". I want the link to point to
    /etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
    To summarize my questions,
    1) Where should the web app be located in the Portal server?
    2) How to make a link inside one jsp page (channel) to point to another page inside the same folder?
    Thank you in advance

    Hello Karthik,
    I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
    The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
    Do you still have any other suggestions?
    Thank you

  • Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

    More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
    In this article, I will show you guys how to convert videos on windows and mac.
    Part 1. How to Convert and Edit Videos on Windows
    For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
    Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
    Step 1: Download and install Aiseesoft Total Video Converter
    After you download it to your computer, double click it and it is really easy to install.
    You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
    http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
    Step 2: Load Video
    Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
    Step 3: Select the target to decode
    In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
    Step 4: Set Advanced Parameters
    After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
    Step 5: Choose a Destination
    To browse and find a output folder for your output files or just the default one.
    Finally, Click “Convert” button to begin your conversion, here in the converting
    interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
    Tips: How to Edit the Output Video
    This video converter is also a video editor, you can use it to edit your output video as follows:
    http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
    1. Effect:
    You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
    2. Trim:
    In “Trim” section you can pick up any part of the video to convert.
    There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
    3. Crop:
    This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
    4. Watermark
    In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
    Part 2. How to Convert Video on Mac
    This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
    Step 1: Add File
    Click “Add File” button to load the video you want to converter
    http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
    Step 2: Choose profile and adjust settings
    You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

    @ Tamwini
    Your only goal is to sell software.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • How to convert data from a report in PDF which are specified on multiple lines ?

    It often occurs that in a report one detail entry is folded onto two subsequent lines.
    e.g.
      No.  
    Container          Lt Ht Tp F/E     Dam          Weight Temp     Bi Im First Seal     No. Cell     Booking ref.
    In Arr    id     A         Tml         PoL PD   PoD             C T L R F B                                                                                 
    1       XXXU123456-7  20 ST I F                        24.000                                  SLX11            1    25A     CVA12345  
    How does the conversion to Excel is going to handle this ?
    I need the second line of data in my excel sheet.
    YES               9/10   14:15        BEANR   REFCT

    Hello Jay,
    Don't use SSIS to convert. Use SSIS to FTP the files out.
    How you convert to PDF: the format is owned by Adobe so there might be royalties involved, but there are paid and free (OSS) libraries to doing so. Just search online.
    Arthur
    MyBlog
    Twitter

  • Very Urgent--- How to Convert Non Valuated stk into Valuated

    Dear GURU'S
    Actually for a material A when i see the stock in MM03 in accounting tab i see less stock then when i see in MMBE
    i.e in MMBE if i select Material A and Plant B(Which is depo in my case) i see stock as 39
    but for same material MAterial A and Plant B ,if i see in MM03 --in accounting tab i m able to see less stock i.e only 1
    ============================================
    Well the problem is In MM03 I cud see only valuated stk i.e qty as 1
    And in MMBE for a partiocular material for a particular plant the stock was 39
    i.e Here i am getting Valuated + Non valuated stock
    i.e i am getting difference of 25
    =====>>>
    To get into the root cause
    I have gone to MB5B where i can get all the transaction that has been done on this material with movement type also i got the intial stock ,Goods recpt ,Goods  issu and total stock
    No for a particular material
    In MB5B it is showing
    Stock on 01.01.2005    =  38
    receipts total               = 238
    Issues total                  =237
    Stock as on 18.02.2008 = 39(which is equal to Stock in MMBE)
    =============>This is for valuated +Non valuated stock
    Where as if i want to see only valuated stock it was showing
    receipts total      = 238
    Issues total         =237
    Stock as on 18.02.2008 =1  (which is equal to stock in acctg view in MM03)
    ====================>This is only for Valuated Stock
    ======================================
    Now how to solve this :
    The initial qty(38) which has been posted it was at the begining that is at the start of the project
    And the people who have posted it ,it was non valuated
    that is the reason it is showing difference in MM03 and MMBE
    First thing
    How can i see on which date this initial stock has been posted
    Second Query
    How to convert this non valuated stock into Valuated stock
    So that the quantity in MMBE and MM03 gets matched
    Willl award 10 Points if my problem gets solved
    THANKZ IN ADVANCE
    REgds
    Shailesh

    Dear friend
    Actuallly i have checked the history of that particular Item in MB51
    I have gone through all the documents created for this material
    Now this material also exist in DEPO which is located at chennai and plant is at mumbai
    So Initially in the year-2006(31-10-2006) whater documents are created i.e STOP has  been created and delivery has been made (Mov type-601)
    are non valuated stock ,means they have been posted without any valuation
    But from year 2007(01.02.2007) the documents whiohc have been posted are valuated
    i.e is the reason when i am executing transaction MRN9 to check the history of valuated stock
    I cant see non valuated stock
    Well now how to do the valuation of this stock which have been posted in year 2006 so that
    In MMBE and MM03 there is no difference of stock
    Plz hepl
    regds
    shailesh

Maybe you are looking for