How to convert back to regular plan?

I am on a shared plan. I started the edge plan in December so I could get a new phone and the other line is not on the edge plan. How can I convert my phone back to the regular plan and not be on the edge plan anymore?

    Sives, we love the Edge program and want you to as well! Why do you want to stop it? Maybe we can find a good solution for you. After the 14 day worry free timeframe is over the Edge plan cannot be canceled.
SarahO_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • How to convert an int number to a byte array, and how to convert back?

    Hello, everybody,
    Just as the topic, if I have an int number(which should have 32-bit, or 4-byte), how can I convert it into a byte array. And also, how to convert it back.
    Thank you in advance!

    Alternatively you can use ByteBuffers to do this work for you
    // to a Byte Array
    int originalInt =...;
    ByteBuffer myBuffer = ByteBuffer.allocate(4);
    myBuffer.putInt( originalInt );
    byte myArray[] = myBuffer.array();
    // and back to an int
    ByteBuffer myOtherBuffer = ByteBuffer.wrap(myArray);
    int finalInt = myOtherBuffer.getInt();

  • How to convert back to v10.7 Lion

    I am using 10.8.2 Moutian Lion
    but i would like to convert back to v10.7
    Reason for this is my sims 3 does not play well as all on the new update
    I would like to have Moutain Liom on macintosh HD (350GB)
    then 10.7 on Macintosh HD 2 (Mounted Patition) (Second Volume 150GB)
    or if anyone knows a way i can play my sims without crashing help

    Hold down the Command+Option+r key at startup, hold those key down until you see a Spinning Globe in the center of the screen (If you let them up before you see the globe the computer will either boot normally or to the built in Recovery HD partition). That will boot the computer from the Online Internet Recovery system where you can Re-Install Lion 10.7.5 on your other partition. When the computer boots from the Internet select Reinstall Mac OS X, and underneath that is should say "Reinstall Lion OS X on your Mac" or something similar. Click on that and click the Continue button. When it starts POINT i the install to the second partition on your drive (that is if you have already created it).
    It is best to have the system WIRED, Ethernet cable, to your router as WiFi will work but any WiFi drop outs will cancel the download and install.
    Good Luck and Best Wishes.
    P.S.
    I to have gone back to Lion but stilll have Mt Lion and Snow Leopard installed on separate partitions. IMHO Lion just runs better then Mt Lion. Mt Lion is just to iOSish for me.

  • How to get back to regular arrange view after double clicking on a rex file

    Hi. How do I get back to the regular arrange view where I can see all of my tracks in the arrange window. I had double clicked on one of the tracks which was a rex file. I wanted to see what the slices looked like. Doing so just brought me to a new arrange looking window with the one rex file track as the only track. And now I can't get back.
    PBG412" Mac OS X (10.4.5)

    Double Click on the arrange background
    J

  • How to convert back from UTF8 to ISO-8859-1 encoding?

    hi,
    I have a bunch of XML files which were wrongly encoded, and we lost all our accent characters.
    ie: é become é
    so how can I recover my XML files using powershell?
    so I want to change all the UTF8 ecoded characters back to the original ISO accent character
    é -> é
    I try this:
    1")
    $utf8 = [System.text.Encoding]::UTF8
    $utfBytes = $utf8.GetBytes("é")
    $isoBytes = [System.text.Encoding]::Convert($utf8, $iso, $utfBytes)
    $iso.GetString($isoBytes)
    but doesnt works.
    so is there a way to do this in powershell?
    I have to scan hundreds of files...
    thanks.

    You can't.  UTF-8 strips all of the information from the characters so you cannot know which characters are which.  If you know which characters you need to fix (requires knowing the spelling of the words) you could possible develop an matrix of
    replacements. There is no simple one line method.
    ¯\_(ツ)_/¯

  • How to Convert back to CS5.5 after cancellation of Creative Cloud CS6

    I have subscribed to cloud for use and trial, however I am purchasing CS5.5 since I found it so great, but still can't afford the cs6.  My question is about the documents i made in premiere pro cs6, and the ones that were converted to CS6 from my earlier version previously used (CS4).  How do I get those back to former versions so I can edit and use them again after cancelation of creative cloud cs6?
    I have a whole lot of Premiere Pro and Aftereffect docs that I edited and hence were converted during use of the CS6 Cloud, but now I NEED them back to either CS5.5 (which I am purchasing today), or at the very least my CS4.

    It's a circular thing: You need AE CS6 to save back to CS5.5, so unless you stil lhave a working CS6 version, there's no way to convert. Premiere Projects are generally not backward compatible, but I could be wrong. I don't use Premiere that often and may be missing something...
    Mylenium

  • How to convert planned order to purchase requisition

    Hi,
    We have executed MRP run with the option create purchase requisition as '2' i.e purchase requisitios in the opening period.Now the system has created some planned orders and some purchase requisitons.
    Now we want convert the planned orders in to purchase requisitions ,how to convert them in to PR.
    We have MD14 and MD15 transaction codes but don't have authorisation.
    Will the system automatically convert them to  PR in the next MRP run or we have convert them manullay?
    Is it possible to delete the palnned order and re run the MRP with the option of creation indicator as '1' and in this cas whether teh system will consider existing PR(which got created earlier)?
    How to delete the palnned order?

    Hi chinni,
    You can convert the planned orders to purchase requisitions in MD04. to avoid this check If procurement type for the materials is E then, change it to F. Now Rerun the MRP by selecting planning mode as 3 - Delete and recreate planning data and create purchase requisition as u20181u2019. All planned orders will get deleted and purchase requisitions will be generated.
    Try this and revert back for further clarifications.
    regards
    Venkat.V

  • Convert text path back to regular path

    I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke. Any ideas?

    The "disconnected paths" element is confusing. Is this file an ai file, or is it possibly a pdf? If pdf, then there may be NO type path to select, as pdf often places each letter as individual type elements. Is this what you are experiencing? If so, locate the originating AI file.
    To select a type path using the Direct Select tool (if it is indeed a type path), on Mac, hold down the option key while clicking on the path (away from the type itself).

  • How to "roll back" SAP APO PPDS planning batch run from infeasible batch mid-point to before start of planning batch run?

    Hi Experts,
    We are investigating if any SAP customer that implemented SAP APO PPDS has ever attempted to establish a "roll back" of the SAP APO PPDS created supply plan to a defined point before the start of the SAP APO PPDS planning batch run?  
    We have a situation where - in the middle of the planning batch run - randomly or intermittent the batch run hangs or runs a step for multiple hours that normally, at most days, takes only a few minutes to run.  In a situation like this, the supply plan is not in a state where customer sales orders can be promised  (using GATP CTP) or planned orders can be converted to production orders and published to SAP ECC, etc since the plan may be capacity infeasible or simply partial or incomplete.   To not hold the business operations hostage to wait resuming operations (promise customer sales orders, convert and release and execute orders to transfer, deliver, produce, or purchase) for hours or days, we need to find a way back to the original plan right before the nightly PPDS batch planning job started.
    We already close all the queues from ECC to APO, thus, no CIF traffic from ECC to APO.  We also shut down the customer sales order feed into ECC as normal process for duration of the APO PPDS batch planning run.  Thus, functionally,  we are theoretically in a situation to simply go back to a PPDS and active planning version save prior to the run.  Yet, many more technical and BASIS-related questions remain on how to roll back to a state where the plan was not compromised.
    This inquiry is to learn if any other SAP customer has ever established a process to roll back SAP APO PPDS to a previous point in time supply plan to resume operations?  Whatever the reasons are, be it after a failed  batch run, or any time during the normal interactive plan day.  
    Additional information about our design and plan:  
    1.  We have a two year horizon supply plan in PPDS
    2.  We only publish to ECC 14 days worth of planned orders, stock transfer requirements, and purchase requirements
    3.  We convert planned orders to production orders and release production orders in ECC 2 days before first operation starts
    4.  We convert PR's to PO's and STR's to STO's in ECC  2 days before execution (ship or submit to vendor)
    Any indication where a SAP customer has developed and uses a process to roll back an SAP APO PPDS- planned supply plan to an earlier point in time or version would be helpful to know.
    Regards,
    Manimaran M.

    Hi  Manimaran,
    Saving in Simulation means in DS board when you click on save it provides you option to save sim version or adopt to active version. If you copy to inactive version you cannot copy back  trasaction data specially PPDs orders back to active version again while if you save in simulation you can adope it to active version at any point of time. YOu can adopt simulation version changes to active version using T-code /SAPAPO/CDPSS0
    Copying to active version means you copy data from version 000 to some other active version while here results are kept simulation,

  • When I turn on messages, I can't see my messages.  All I can see is a screen with horizontal lines and a text list of addresses.  How can I get the regular message screen back?

    When I turn on Messages, I can't see my messages.  All I can see is a screen with horizontal lines.  How can I get the regular Messages screen back?

    The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

  • HT1551 Does Apple TV shut down when you switch back to regular TV?  Or do you have to sign out and how do you do that?

    Does Apple TV actually shut off when you switch back to regular TV?  Or do you have to sign out?  How do you sign out?  Or is there another way to shut it off?  Thanks!

    No, you need to go into the settings and select sleep now.
    You can also press/hold the select (centre) button on the remote for 5 seconds.

  • How to convert surround back to stereo?

    I've got into a problem with surround sound. One track from the loops library is in surround format and this seems to make it impossible to insert mastering fx in the normal way on the Out 1&2 tracks? (The insert slots have simply disappeared.)
    Can anyone enlighten? How does a surround sound get converted back to normal stereo, and how do i go about restoring the insert slots to the out 1&2?
    Thankz ahead,
    Byz

    More correctly, BufferedImage extends Image as Image is an abstract class and not an interface.
    Shaun

  • The display of web sites in response to a search is showing up very small on my screen. How do I get it back to regular size?

    I may have unknowingly punch a combination of keys or something on the menu. But the result is that when I do a search, the resulting list of web sites shows up very small in the upper left hand corner of my screen. How do I get the display to default back to regular size? Now the default is tiny type that I can't even read. Thanks.

    { Ctrl + 0 } to reset the zoom level as you are viewing that page
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • How do I switch from headphones back to regular volume if I use my headphones I have trouble with regular communication the phone rings but I cannot hear the speaker

    HOw do I switch from headphones back to regular volume.if I use my headphones I cannot get the volume to work for incoming calls the phone rings but I cannot communicate

    Do you have a screen protector on? At times of poorly made it will cause problems with the sensor for the screen lighting

  • I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

    I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

    Hi edilsoncf,
    I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
    See: How do I get a refund if I have multiple Acrobat service subscriptions?
    Best,
    Sara

Maybe you are looking for