How to convert BigDecimal to double

Error Message: {http://xmlns.oracle.com/OracleRules1/OracleRules1_DecisionService_1}operationErroredFault
Fault ID default/BusinessRule2!1.0*b48a0c26-0b59-41e0-8939-55c7589d76f1/BusinessRule2_BPELProcess/10004-BpInv0-BpSeq2.9-4
Fault Time Jan 15, 2010 11:52:33 AM
Non Recoverable System Fault :
<bpelFault><faultType> <message>0</message></faultType><operationErroredFault xmlns="http://xmlns.oracle.com/OracleRules1/OracleRules1_DecisionService_1"><part name="payload"><errorInfo xmlns="http://xmlns.oracle.com/OracleRules1/OracleRules1_DecisionService_1"><errorMessage>cannot convert from type 'java.math.BigDecimal' to type 'double' at line 5 column 9 in main</errorMessage></errorInfo></part></operationErroredFault></bpelFault

>
> how to convert bigdecimal to double in webdynpro java
Hi,
Try this:
double x = wdContext.currentContextElement().getBigdecimalAttribute().doubleValue();
Refer methods applicable on Bigdecimal here -
http://code.google.com/android/reference/java/math/BigDecimal.html
Regards,
Anagha
Edited by: Anagha Jawalekar on Nov 17, 2008 12:08 PM

Similar Messages

How to convert a double to integer ?

Hi,
how do convert an output of a pow(2,n) method of Math class to integer. Since this pow(x double, y bouble) gives an output of type double, how do i convert this output to integer if i want the value returned as an integer ?
thanks
aron

By casting (but note that this may not yield the results you want)...
class Test {
     public static void main(String[] argv) {
          double a = 5.5;
          double b = 6.6;
          int c = (int)(a + b);
          System.out.println(c);
}

How to convert data buffer of type "oracle::occi::OCCI_SQLT_NUM" to double

Hello All,
I am using bulk reading by utilizing 'setDataBuffer()' method call and fetching N records at a time.
It works well for fields of Oracle type VARCHAR, when I set
h5. rs->setDataBuffer(col, buff, oracle::occi::OCCI_SQLT_CHR, size, lens, inds);
and later iterating and interpreting data within 'buff' like this:
h5. char* text = ((char*)buff) + size*i; <-- length is in lens array
When the column's data type is NUMBER however, I am stuck.
Indicating that data type to data buffer works well:
h5. rs->setDataBuffer(col, buff, oracle::occi::OCCI_SQLT_NUM, size, lens, inds);
I would like now to extract a value of c++ double type from that buffer.
But I do not have an idea how to handle data within buff. I suppose it should have NUMBER stored inside in some internal format (just as described in Oracle® C++ Call Interface Programmer's Guide, section 'Description of External Datatypes', NUMBER)
Gestures like casting to double or trying to interpet the buffer's inner as oracle::occi::Number do not produce sensible results.
Could you help me to understand how can I obtain the double value from that buffer in a bulk read?

I have the following code which has been working for me.
showln ("Array Fetch");
sql = "SELECT c1, c2, c3, c4 FROM nd17_otab";
stmt->setSQL ( sql );
OCCIResultSet *rs = stmt->executeQuery();
rs->setDataBuffer (1, num, OCCIINT, sizeof(ub4), lenC1);
rs->setDataBuffer (2, flt, OCCIBFLOAT, sizeof(float), lenC2);
rs->setDataBuffer (3, dbl, OCCIBDOUBLE, sizeof(double), lenC3);
rs->setDataBuffer (4, str, OCCI_SQLT_CHR, CHRS, lenC4);
if ( rs->next(ROWS) )
show ("Number of Rows Fetched: ") << rs->getNumArrayRows () << endl;
showln ("Fetched Records");
for (int j = 0; j < ROWS; j++ )
show ("C1: ") << num[j] << endl;
show ("C2: ") << flt[j] << endl;
show ("C3: ") << dbl[j] << endl;
show ("C4: ") << str[j] << endl;
stmt->closeResultSet(rs);
c1, c2, c3, c4 columns in table nd17_otab are of type NUMBER, BINARY_FLOAT, BINARY_DOUBLE & VARCHAR2

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to convert existed standalone APP to java web start app?

hello:
I didn't find useful information about how to convert an existed java
app into app which can be launched using java web start from the sun java developer's guide.
I have designed a simple java applcation and want to lauch this program with
java web start techniques(on local machine only). Is there any easy way that i could convert my program to the one which support java web start, so i can double click the *.jnlp file to launch my java applcation.
thank you
-Daniel Mark

i just found a great place to resolve my question.
If you had the same question, please refer to
http://www-106.ibm.com/developerworks/java/library/j-webstart/
thank you
-Daniel

How to convert a baseband signal with bandwidth 20MHz to an RF signal with center frequency 2.4GHz and the same bandwidth 20MHz

Hi,
I was wondering how to convert a complex baseband signal with bandwidth 20MHz to an RF signal with center frequency 2.4GHz and the same bandwidth 20MHz in simulation. I tried
1. Multiplying the complex double type baseband signal (1-D array) by exp( j * 2 * pi * 2.4E+9 * T ) where T is the symbol period of baseband signal.
2. Usage of MT upconvert baseband but doesnt keep the BW constant
Looking forward to your help.

I should add that you can multiply your baseband signal with two carrier signals that are shifted by 90° and then add or subtract the result to obtain upper or lower sideband only. You can try to search about IQ moduilators/demodulators to learn more.
Cheers
Edgar

How to Convert the Warning Message to Error Message in Standard Transaction

Hi,
I face one problem in Standard Transaction Code CS02. In that by entering the material Number, Plant, bomstatus press enter. it gives a warning message. How to convert the Warning message to Error. In abap how to do that. Please help me.

Mohan,
It appears that there is some configuration you can do for BOM Message types to change the message type. The IMG link for this function is:
Production->Basic Data->Bill of Material->General Data->Change Message Type
However you need to read the IMG documentation to see if this will work for you. There are only certain messages that can be changed with this configuration step.
Also, please do not double post questions in the forums.
Best Regards,
Chris H.

How to convert class file

Hi all, I am new in java card development.
This is my environment setting:
@echo off
set JC_HOME=C:\JavaCard\java_card_kit-2_2
set JAVA_HOME=C:\j2sdk14103
set PATH=.;%JC_HOME%\bin;%PATH%
I have created the Wallet applet according to 'Zhiqun Chen" text book and named it WalletApp.java.
I have compiled this file to a class file.
This is where is I saved my file
C:\JavaCard\java_card_kit-2_2\samples\src\com\sun\javacard\samples\WalletApp\WalletApp.java.
But I don't really understand how to convert the class file.
May I know what is this for?
-out EXP JCA CAP
-exportpath
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1
com.sun.javacard.samples.HelloWorld.HelloWorld
com.sun.javacard.samples.HelloWorld
0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
must save this in what file?
I tried to type in the command line below (and the result):
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sap
les\Wallet\Wallet.opt
error: file scr\com\sun\javacard\saples\Wallet\Wallet.opt could not be found
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
use file for all options and parameters to converter
Where options include:
-classdir <the root directory of the class hierarchy>
set the root directory where the Converter
will look for classes
-i support the 32-bit integer type
-exportpath <list of directories>
list the root directories where the Converter
will look for export files
-exportmap use the token mapping from the pre-defined export
file of the package being converted. The converter
will look for the export file in the exportpath
-applet <AID class_name>
set the applet AID and the class that defines the
install method for the applet
-d <the root directory for output>
-out [CAP] [EXP] [JCA]
tell the Converter to output the CAP file,
and/or the JCA file, and/or the export file
-V, -version print the Converter version string
-v, -verbose enable verbose output
-help print out this message
-nowarn instruct the Converter to not report warning messages
-mask indicate this package is for mask, so restrictions on
native methods are relaxed
-debug enable generation of debugging information
-nobanner suppress all standard output messages
-noverify turn off verification. Verification is default
*********************************************************May I know What is the correct command line to convert the class file and what must I do to before converting the class file?
I saw some article saying we must use JDK1.3, is it a must?
Your solution is highly appreciated.
Thank you!

Hi Ricardo,
I saved the file below as WalletApp.opt in the directory of scr\com\sun\javacard\samples\WalletApp
-out EXP JCA CAP
-exportpath c:\javacard\java_card_kit-2_2\api_export_files
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2:0x1 WalletApp.WalletApp
WalletApp 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2 1.0
But I still have the problem below:
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sam
ples\WalletApp\WalletApp.opt
error: file scr\com\sun\javacard\samples\WalletApp\WalletApp.opt could not be fo
und
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
May I know What's wrong with my command or file?
Where can I download JDK because what I can find is J2SDK.
Thank you!

How to convert string to 16 characters.

My external unique id is too long, more then 30 characters.
How to convert it to 30 characters using sql?

You should find another extranal system id in order to mantain uniqueness, but you could also use the name field (that supports 50 characters), but it deppends of which entity you are using.
Which is the entity? and...if the only way to insert data is by web services the you could use more than one field to verify uniqueness since you can query more than one field at the time.
Hope it helps
Kim.

How to convert Web app into a channel?

To whom it may concern,
Does anyone know how to convert a Web app into a channel inside the Portal server 6.0?
I developed the web app and tried to create a provider and a channel for it, but the Portal server did not recognize the WEB-INF folder and give me errors saying that it couldn't locate the class files.
I also have a problem with URL inside my jsp page (channel).
For example, I have two jsp pages:
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test1.jsp
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
and when I try to put a link from test1.jsp to test2.jsp using
... and make a channel based on test1.jsp. The channel will display the link as "http://mydomain/portal/test2.jsp" and result in "Error: page not found". I want the link to point to
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
To summarize my questions,
1) Where should the web app be located in the Portal server?
2) How to make a link inside one jsp page (channel) to point to another page inside the same folder?
Thank you in advance

Hello Karthik,
I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
Do you still have any other suggestions?
Thank you

How to convert data from a report in PDF which are specified on multiple lines ?

It often occurs that in a report one detail entry is folded onto two subsequent lines.
e.g.
No.
Container          Lt Ht Tp F/E     Dam          Weight Temp     Bi Im First Seal     No. Cell     Booking ref.
In Arr    id     A         Tml         PoL PD   PoD             C T L R F B
1       XXXU123456-7 20 ST I F                        24.000                                  SLX11            1    25A     CVA12345
How does the conversion to Excel is going to handle this ?
I need the second line of data in my excel sheet.
YES               9/10   14:15        BEANR   REFCT

Hello Jay,
Don't use SSIS to convert. Use SSIS to FTP the files out.
How you convert to PDF: the format is owned by Adobe so there might be royalties involved, but there are paid and free (OSS) libraries to doing so. Just search online.
Arthur
MyBlog
Twitter

Very Urgent--- How to Convert Non Valuated stk into Valuated

Dear GURU'S
Actually for a material A when i see the stock in MM03 in accounting tab i see less stock then when i see in MMBE
i.e in MMBE if i select Material A and Plant B(Which is depo in my case) i see stock as 39
but for same material MAterial A and Plant B ,if i see in MM03 --in accounting tab i m able to see less stock i.e only 1
============================================
Well the problem is In MM03 I cud see only valuated stk i.e qty as 1
And in MMBE for a partiocular material for a particular plant the stock was 39
i.e Here i am getting Valuated + Non valuated stock
i.e i am getting difference of 25
=====>>>
To get into the root cause
I have gone to MB5B where i can get all the transaction that has been done on this material with movement type also i got the intial stock ,Goods recpt ,Goods issu and total stock
No for a particular material
In MB5B it is showing
Stock on 01.01.2005    = 38
receipts total               = 238
Issues total                  =237
Stock as on 18.02.2008 = 39(which is equal to Stock in MMBE)
=============>This is for valuated +Non valuated stock
Where as if i want to see only valuated stock it was showing
receipts total      = 238
Issues total         =237
Stock as on 18.02.2008 =1 (which is equal to stock in acctg view in MM03)
====================>This is only for Valuated Stock
======================================
Now how to solve this :
The initial qty(38) which has been posted it was at the begining that is at the start of the project
And the people who have posted it ,it was non valuated
that is the reason it is showing difference in MM03 and MMBE
First thing
How can i see on which date this initial stock has been posted
Second Query
How to convert this non valuated stock into Valuated stock
So that the quantity in MMBE and MM03 gets matched
Willl award 10 Points if my problem gets solved
THANKZ IN ADVANCE
REgds
Shailesh

Dear friend
Actuallly i have checked the history of that particular Item in MB51
I have gone through all the documents created for this material
Now this material also exist in DEPO which is located at chennai and plant is at mumbai
So Initially in the year-2006(31-10-2006) whater documents are created i.e STOP has been created and delivery has been made (Mov type-601)
are non valuated stock ,means they have been posted without any valuation
But from year 2007(01.02.2007) the documents whiohc have been posted are valuated
i.e is the reason when i am executing transaction MRN9 to check the history of valuated stock
I cant see non valuated stock
Well now how to do the valuation of this stock which have been posted in year 2006 so that
In MMBE and MM03 there is no difference of stock
Plz hepl
regds
shailesh

How to convert a .jad file to .class file in JAVA Swings.

Hi all,
Sorry for the interruption.I am also facing the same problem.I am using DEJDecompiler.But my application is not J2ME But J2EE.( a Swing application).I opened .class file and made some changes but I dont know how to convert into a .class file again.
I tried saving .jad file to .java file.Then it is showing lot of errors in Eclipse Platform.I doubt if there are any errors in the .class file already,then how could the program would run.I put all the programs in the respective platforms only and then testing.It fails.
(2) one more question,is if I do not need to disturb any existing coding and need to create a seperate java file which will do my customisation,then what should I do.I could not get any interfaces in the program.
Please help me as the matter is most urgent.
Thanks in advance
With regds
Satheesh.K

I tried saving .jad file to .java file.Then it is
showing lot of errors in Eclipse Platform.I doubt if
there are any errors in the .class file already,then
how could the program would run.I put all the programs
in the respective platforms only and then testing.It
fails.So who's Java program/library are you trying to steal?
(2) one more question,is if I do not need to disturb
any existing coding and need to create a seperate java
file which will do my customisation,then what should I
do.I could not get any interfaces in the program.
Please help me as the matter is most urgent.Wow, you urgently need to steal someones program/library. The best person to give you advice urgently is the owner of the program/library you are trying to steal.
Thanks in advancePlease don't thank me because I'm not going to help you!
With regds
Satheesh.K

How to convert the javasource file(*.class) to execute file(*.exe)?

How to convert the javasource file(*.class) to execute file(*.exe)?
thank you!

Although i have seen a few programs (that are platform specific) that will embed a small jvm into an exe with your class file, it is generally excepted that you cannot create an executable file using java. The JAR executable file is probably the closest your going to get
Pete

How to convert java class file version without decompiling

Hi,
Oracle R12.1.3 i am having illegal access error while try to access the class file version Java 1.3 uses major version 47,So how to convert the class file version without using decompiling.
Current java version is 1.6.0_07
Is there any tool or API for converting class file version?
Thanks,
Selvapandian T

Beside this I wonder where you get your error from since AFAIK 12c comes with java 1.6.
Well wonder no more!
OP isn't using Oracle 12c database.
They are using Oracle R12.1.3 - which is the E- Business Suite.

How to convert BigDecimal to double

Similar Messages

Maybe you are looking for