How to convert EZ vinyl/tape converter files to itunes

itunes

soupcake wrote:
how to convert EZ vinyl/tape converter files to itunes
What format are they?
Windows XP, how do i find lost music
Where is it lost from?

Similar Messages

  • I am using ION U Record EZ vinyl/tape converter and cannot upload content onto itunes

    I am using ION U Record vinyl/tape converter which uses itunes.  I can record the track but it does not upload content onto itunes.
    I have successfully transferred many songs but have now updated to a later version of itunes and can no longer upoload content.
    All that appears is "EZ vinyl Tape Converter par Mixmeister'  with no content in the file !! 
    Does anyone else use one of these units who may have had similar problems ?

    Basic forum etiquette, search before posting.
    Several similar postings appear in the "More Like This" section over there ========>

  • HT1473 I have an EZ Vinyl/Tape Converter (MixMeister) to export vinyl records to iTunes. The computer downloads (records) the songs from the record, but when it is to be exported to iTunes, I get a window that says iTunes unable to export. (compatability?

    I have an EZ Vinyl/Tape Converter (MixMeister) to record vinly records to my computer; which then is supposed to automatically download to my iTunes program. But it does not. It records and stores (somewhere) in the computer, but when it is supposed to be exported into iTones, I get a window that says something about incompatability and/or "close other windows in iTunes; but there are no open windows and iTunes is closed. I followed all instructions to EZ Vinyl to the T, but no export/import to iTunes. What am I doing wrong? What do I need to do? THX!

    Tony, thanks so much. The message reads: "Unable to export to iTunes. Please make sure you close any active windows in iTunes. Would you like to try exporting again? [Yes] [No]"
    And of course I click on Yesl, but I keep getting the same window message. I read somewhere, that MixMeister is not compatible with Apple iTunes 10 series versions. The advice said to go to control panel; Programs; click on iTunes; click on Change; click on Repair. I tried that, but I still get the same window message. Then I read that I should contact the mixmeister support website, which will be my next step. But if you can provide any direction, I would greatly appreciate it. Thanks again!
    Dan

  • Can anyone help with a compatibility issue with EZ vinyl/tape converter?

    I have been using EZ Vinyl/Tape Converter in conjunction with an ION turntable to transfer all my old vinyl into iTunes.
    I have had no problems until the latest version of iTunes was downloaded and installed.
    Now, if I attempt to import a track using EZ, it tries to import into iTunes for a couple of minutes, before giving me an error message which says "Make sure all active windows in iTunes are closed".
    I have no idea what this means, because I'm doing nothing any differently to what I've always done.
    Can anyone suggest what might have changed?
    Thanks in advance.
    Mel

    i have same problem too any suggestions anyone pls have so much music with vinyls to keep help

  • Why has EZ Vinyl/Tape converter stopped working with Itunes?  I have used for several years, but now recent 11.0.4 Itunes has a problem with "Script conflict", and EZ has a brain-****.  Conversion goes into Itunes Playlist-not song/artist/album listing li

    What has stopped Itunes from working with EZ Vinyl/tape converter????  I get a "Scripts conflict" error, and Itunes bugs out.
    I had two Geek squad people in to look at, and they can't get it to work like it had for three years.  Is 11.0.4 to BLAME!!!!

    I'd like to know who Marlene is....oh wait, it was a mixup.
    I suspect these posts will be deleted.
    It's every software company's answer to everything - upgrade to the latest version.
    And for good reason, the bugs they know about get fixed, while introducing new ones. Not on purpose, of course, it just happens.

  • How can I back up my uploaded files in iTunes Match?

    I have started uploading files to my iTunes Match library but during the process, I got error 4002. Don't  know what this means. I already checked my connection and everything is good. What I did is I cleared my hard drive and reinstalled my OS and then started over. I noticed that some of the songs are greyed out. I cannot play or download the files that are greyed out. Do you have any ideas on how I can get the greyed out files on my iTunes Match library? Thanks.

    Hi,
    Did you delete your music from your hard drive when you reinstalled your OS.
    Match scans your iTunes library and from the brief info that you provide, it would appear that the match process had not completed. Therefore you have greyed out songs.
    You will need to restore those tracks from your backup. I trust that you have a backup of all your music!
    Jim

  • How to import large library of .wav files into itunes with tags?

    I have an external NAS drive where I imported approximately 400 CDs in .wav format utilizing itunes many years ago. My itunes library was recently corrupted requiring a reinstall of itunes. The .wav files are preserved and are filed by Artist folders containing Album subfolders which contain the tracks listed by number and name. The problem is when I reimport the files into itunes the artist and album name is lost leaving only the track name, which makes it impossible to organize a library of music.
    I would like to batch process and import the .wav files on my NAS drive into itunes in either a high-quality mp3 or AAC format with the songs tagged correctly to allow for an organized and searchable library. I would rather not have to reburn all of the CDs since that required substantial time and effort.
    I welcome any solution to this problem.

    itunes can't do what you want. It will do exactly what you said, lose everything, because wav files don't have ID3 tags. And, I suspect it dumps it all into an "Unknown Album" subfolder under "Unknown Artist".
    You can try the tagFromFileName script on this page, brought to you by an apple discussion forum regular turingtest2. I have not used it myself, but have seen posts from several people happy with the results!
    http://samsoft.org.uk/iTunes/scripts.asp

  • How do i slow down and audio file in itunes

    I uploaded an audio file from my droid into Itunes, but the file plays back really fast. It sounds like the chipmunks and you can't understand it.

    There isn't any way to slow it down in iTunes itself.  Probably the Droid is using some codec to encode the file that iTunes doesn't fully understand.  iTunes may think, for example, it is a 128k bitrate file whereas it's really 32k and iTunes plays it 4x too fast.  What file format does the Droid produce?
    You could try using a player such as VLC and see if it does it right.
    Once we know the file format produced we might have suggests for solutions.  You might end up having to re-code it which is not nice since it turns what is probably a low quality sound file into an even lower one.

  • Third party hardware for converting Lp's & tapes//converting VHS

    Awhile back, I happened to notice a friend using an relatively inexpensive third party hardware/software bundle that was able to convert the audio output from his stereo to his mac for creating MP3s from Lps & cassette tapes. Does anyone know of a inexpensive product that will do this?
    On a separate topic, I have a few VHS tapes I would like to convert to mov files. Is there something similar to the above item that will do this for me? I would prefer it have a firewire interface (Why FW vs USB? Because I have too many USB items plugged into my G5 as it is; I have always had spotty luck with third party items that solely use USB, the acception being my Epson products; and I tend to have a personal preference for FW.) and also be inexpensive, since I will be using this on a very occasional basis.

    Yosarian,
    I don't use the ADVC 55 or Datavideo's product so I can't comment on it. But like most things, you get what you pay for and saving a few bucks here or they will cost you in quality or a feature you may need shortly down the road. As for connecting a walkman to the back of your G5, it will sound "good". Meaning that if the same music were played side by side from a CD and cassette, you would hear the difference. However I've done it dozens of times for different types of projects and it's very acceptable. If you play the CD you make from the transferred cassette on a high quality home stereo system, it will sound a bit compressed, but if played in a car, boom box, iPod, etc. you will likely never know the difference. In fact, I have transferred many LP's to CD using Roxio toast, and playing the CD's in the car or home sounds wonderful (except the inherent faint "popping" of LP's). Give it a try, it should work for all but the most demanding of applications.

  • How can I restore a corrupted music file from iTunes?

    one of my music files cut off before the end, I erased it from my MacBook Pro and my iPhone 4g and was able to restore it on my iPhone by accessing purchased music but cannot get it back on my MacBook Pro. 

    How to dowload purchased music
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How do you get a corrupted song file from iTunes to be fixed by them so I can download the song?

    I have tried to download a song several times and everytime I do I get a message saying that the file is corrupted.  Since, you cannot seem to report anything to Apple or iTunes, has anyone else had this problem and have you successfully resolved it?

    You should be able to use the 'report a problem' link from your purchase history : http://support.apple.com/kb/HT1933

  • How do i keep my apple lossless files when I use iTunes match?

    When I started using iTunes Match, my Apple Lossless and aiff lossless files were converted to lower quality 256 files in iTunes on my mac.  How do I stop this from happening?  I want to keep the Lossless files as they are. 
    Thanks
    Bud

    Sorry ......  but .....
    Would it make a difference when I used iMatch ....  I started the service the day it was made available.  Was it an original issue and has since been corrected?
    -iTunes and the music files were on my iMac internal Hard Drive.  Only 1 iTunes Library.
    -No alternate iTunes libraries were created ergo match not turned on to an alterante.
    -The original files were added to the iTunes Library from an external hard drive ... which were copied to my internal hard drive by iTunes.  (Advanced tab feature)  The external backup drive (4TB Seagate Mac Drive) is only connected when I use it to backup physical files.  I do not use a backup program.  Everything is copied its own folder.  Most files were ripped from my cd's i.e. to the external Drive using XLD.  Not one pirated file. a few HD albums purchased from HD Tracks.
    -I even tried re-adding some of the Original FLAC files to iTunes again.  They were physical in my iTunes on the internal hard drive.  They were also replaced.
    The fact is .... The Original Files were altered.  They had not been deleted and replaced, they were altered. They were the original files on my internal hard drive.  Only 1 copy of iTunes is on the computer.

  • How to recognize midi files with iTunes 10.6 ?

    iTunes 9.0 recognizes midi files and can it be easily converted into mp3 files.
    For the interfacing with iPad2 I must use iTunes 10.6 and it seems this version is not recognizing midi files.
    How should I do to manage midi files with iTunes 10.6 ?
    Is there in App Store any application with this feature ?
    Really it's a pity that a new iTunes version loses fatures instead of gaining !!

    The MIDI files in my library still work perfectly. It may be that you simply need to install QuickTime which is no longer installed as part of iTunes.
    tt2

  • How to find my iphone back up file in pc without iphone connect

    How to find my iphone back up file in itune without connect my iphone? I lost my phone and urgently need to find my contacts in PC, anyone can help?

    You don't. It's gone. You should really pay more attention to the prompts that pop up on your computer before you just click 'ok'.

  • Podcasts, How to export to .OPML file in iTunes 11

    How do I export to .OPML podcast file in iTunes 11? I can't find this feature in version. Nothing in Help.

    File | Library | Export Playlist

Maybe you are looking for

  • Problems with SAP NetWeaver 7.01 ABAP Trial Version installation

    Hi, I have installed NW 7.01 ABAP trial version "successfully". Unfortunately the application server doesn't start. After some time the Dispatcher process stopps. In the syslog you can see that 7 workprocesses are started. they all don't seem to be a

  • Export in Discoverer 11g

    Hello , I have a Problem with the Web-Version of Oracle-Discoverer. I make an Export in Web-Discoverer 11g. My Result has 700 000 records and if I export this into for example a Text file then I get 177 000 records in this file. Not enough. The same

  • System wide PDF presets location is not working in CC

    On both Mac and PC, the system wide location for PDF settings (.joboptions) does not work anymore. /Library/Application Support/Adobe/Adobe PDF/Settings (on a Mac) It is illogical to remove this feature. Even if that folder does not store the main de

  • IDM: dispatcher is not starting

    Hi, I have installed IDM server and completed the identity center configuration.Now i am adding dispatcher.but when i am testing it i am getting error CLASSPATH: C:\Program Files\sap\idm\identity center\Java\mxdispatcher.jar;C:\Program Files\sap\idm\

  • Nokia E62 and iSync

    Does anyone know of a way to get these two to work. I just purchased an E62 assuming it would be supported because the E61 is. Anyone know of a plugin or hack. I've tried all the ones for the E61 but cant get any to work