How to convert Fla or SWF file in to 70 mm theatricla movie.(cinema)
this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
Manoj
Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.
Similar Messages
-
How to convert Fla or SWF file in to 70 MM movie(cinema)
this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
ManojPrint the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing. -
How to convert .fla to .swf from cli
I am working on a project where we want to parameterize certain variables of a flash file. The idea is: we create a script which replaces the parameters in the .fla file.
The question is: How can I convert that file to a .swf using a script or batch file.
(I know how to do it with CS4 Flash etc., but I do not want to open it at all, the entire process should be executed programatically).
I have found many software to convert swf to fla, but not the other way around.
Thanks for your helpTo create an swf from an fla you need software that can compile the fla file, and you can probably guess what that software is.
-
Versioning of fla and swf files
Hi there,
I am working on a small flash project with one other
developer and we email fla and swf files back and forth. So far
date/time stamps and file sizes have been good enough for "version
control".
I am familiar with versioning systems for development but
what about after a release? How can I determine a released swf
file's build version? Date/time stamps can change with copying and
development could have already progressed and multiple version of
the same swf file are out there...
I am surprised that there isn't a built in mechanism to
assign a version number to a fla/swf file (e.g. as part of the
publish profile) that one can then view via the files properties
dialog... or perhaps somebody has to show me the light... :)
Does anybody have a recommendation on how to give a fla/swf
file a version number that can be checked once the file has been
released?
Thanks,
Dan.. or, Plan B), use QuicktimeX' ability of Screen-Recordings to record while you playback those files in their app.
The resulting mov can be treated as any other movie in iMovie.
Vector-graphics, interactive formats, etc are of no use in an video-editor ... -
How to convert FLV and F4V files to other media formats
How to convert FLV and F4V files to other media formats
Nowadays, every one can download their favorite videos from video sharing websites like YouTube, Hulu, MySpace, Google Video, metacafe, Yahoo! Video, Reuters.com and so on at will. However, these video files we got are usually in the format of FLV, or F4V, which are not workable by most portable devices, or some video players and video editors on our PC. With the intention of solving these problems, this guide will show you how to convert FLV and F4V files to other video and audio formats in detail.
1. Download, install and run Pavtube FLV Converter
As soon as you run this program, the following wine red interface will show up:
2. Add files, set output format and destination folder
Input FLV and F4V files to this program by clicking on “Add” button, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press the output folder to specify the destination folder or just use the path set by default. Moreover, “merge into one file” enables you to combine multiple FLV and F4V files to be as a single file, if you have this needs, just tick it.
3. Set advanced settings
Click “Settings” button, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. on it to optimize the output quality or compress file size.
4. Convert
After all settings are done, you can press “Convert” button to start transferring, and then the following window will show you the conversion info in detail. According to the info you can manage your time and disk space properly.
Pavtube FLV Converter can definitely complete the conversion at a swift speed with excellent quality; also it adopts an advanced audio-video sync technology, so that audio and video match very well in the resulted files. Therefore you need not worry about these issues.
Useful tips:
Free online FLV downloader:
www.convertdirect.com
http://vixy.net/
http://www.videoconverterdownload.com/online-free-flv-converter.html
http://www.flv2mp3.com/
http://www.mediaconverter.org/
http://2conv.com/
http://online.movavi.com/
http://www.youconvertit.com/
http://www.playtube.com/
http://www.convert.net/Flip4Mac
-
How to Put Controls on SWF File... then Export to FLV
Have a swf file that self plays.
What I Need:
I need to imbed this self playing 2 minute video clip with
sound...but I want it to have controls on it and be paused. I want
to use dreamweaver to place it in the web page but stupid
dreamweaver only puts controls on a flv file NOT SWF's.
How can I get a swf file, then add controls, then output to
FLV so Dreamwemaver can put it on my page.
I have Adobe Dreamweaver CS4, Flash CS$ but DO NOT KNOW HOW
TO USE IT - Tried but failed miserably (it didnt even want to put
controls easily on this...I tried for 30 min but couldnt break
through. I have the CS3 Master Collection.
Thanks
All I want is for this video to play universally and nicely
in a web page of mine...when will this stuff ever be compatable and
transparent to use!
SuzzieFor me, not. But yes I have to do this. Maybe I manual have a table which includes the y axis coordinates. X axis is dicrete then when I get the value 2 I will look at its y axis and take the coordinates of the y-axis corresponds to the table
Is it difficult?
Yasemin Barutçu
Electrical And Electronics Engineer -
Converting video to swf files in flash for breeze
Hello,
I am using Adobe Premiere Pro 2 and wanted to know what the
best video codec and audio codec to use when I export to create a
video file to insert into flash to convert to a swf file for
breeze? I am having trouble with the audio, must I demux it first
before I put into Flash? Or is there a audio codec that I can use
in Premiere so I don't have to demux the audio?
Also, when I insert a swf file in breeze plug-in for PPT, it
does not play the video or give me the controll by presentation
playbar I checked off. Not sure what I'm doing wrong, could use
some help, thanks.billcorrigan schrieb:
> Jerich0, I tried this and when I publish it, the swf
opens a connection to the
> server, and starts streaming but nothing happens. Just a
blank movie.
>
> The content is at (FLV):
>
>
http://breeze.extn.washington.edu/p45023528/
>
> and the swf is at
>
>
http://breeze.extn.washington.edu/p17629788/
>
> I created the swf by creating a new document in Flash 8,
selected components,
> edited the infomation in media player and saved the
file.
>
> any suggestions?
>
hi,
if you work with the player component the .flv is not
embedded in the
swf. In Breeze you can only insert a single flash file I
suppose, so the
attached .flv file won't show up.
Kathrin -
How can I import a .swf file in Adobe Flash CS4?
Hi,
How can I import a .swf file in Adobe Flash CS4?
Thanks.you can use file/import but that would be a mistake.
you should "load" your swf, not import it.
if you want to load it and need help, are you using as2 or as3? -
How to convert oracle form fmb file to java swing file using Jdeveloper
how to convert oracle form fmb file to java swing file using Jdeveloper.Please explain with detailes steps if possible or please give a link where it is available
thanks
Message was edited by:
user591884There is no automatic way to do this in JDeveloper. I know there are some Oracle Partners offering forms to java conversion, I don't know how much of their tools are automated and done with JDeveloper. With JDeveloper+ADF you basically rewriting the Forms application from scratch (and using ADF is helpful during this process).
-
How to convert IDOC to flat file in XI
Hello SDNers
I have a scenario IDOC --> XI --> Flat file. My question is how to conver IDOC to flat file. At least there are two ways to do that:
1) Define a flat structure in PI that reflects the IDOC structure, then using content conversion to convert the flat structure to flat file in hte receiver communication channel.
2) There is a [document |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a] talking about using a generic ABAP mapping to map any IDOC to flat file.
For the option 1, I don't want that way, because I would need to define a flat structure in PI for each IDOC which is too much effort. (I would have dozens of IDOC scenarios)
The second one is very attractive. However the document is not complete to follow. Basically it does not explain how the inbound flat structure looks like. I guess the generic ABAP mapping is used to map any IDOC_XML structure to a flat structure, then in the file receiver communication channel to convert the flat structure to flat file format. But the document does not mention how the flat structure looks like. Has somebody tried this scenario? If yes, can you please let me know the steps to do in ESR (IR) and ID? Basically what structure the IDOC_XML should be mapped to using the generic ABAP mapping class?
Or somebody has other ideas on how to convert IDOC to flat file?
Thank you so much
Eric> 1) You are saying that for Java mapping and abap mapping, the target data type (messag type) is just a dummy one, the real (XML) message the receiver will recieve is the one (stream) produced by the java or abap mapping. Is that correct?
Definitely yes!
>
> 2) For the abap mapping option, I would define a dummy target data type. Do I need to do any content conversion in the receiver adapter (communication channel)?
None wat so ever.The output of your Java Mapping will be the Native Idoc Format.
>
> 3) I tried with a dummy target data type as mentioned in my second post, can you see any clue in the error message what is wrong?
Dats one thing I cant help much. Just make sure that the ABAP report is valid and take the help of a ABAP'er to debug what is going wrong. Not much of a ABAP guy, can read ABAP code, but cant write one myself
Try to test the program standalone to see how it works. Maybe take some Idoc XML file as input and then dump the output to a .txt file and so on.
Regards
Bhavesh
PS : All this is from what I have read of this guide. I have not convert Idoc XML to Native Idoc but have used this guide to convert Native Idoc to Idoc XML . -
How To Convert IDOC to FLAT File ?
Dear Expert,
My requirement is to convert the IDOC to FLAT File using XI. How can i do this. I have gone thru the Guide How to convert IDOC to Flat file using ABAP mapping but it does not talk about what are all the stpes i need to do in IR & ID.
I am ready to use ABAP mapping since i am an ABAPER.
Is it recommended to use ABAP mapping since we expect daily 500 IDOCs to be converted to a flat file & transfer this flat file to some FTP location.
Can anybody tell me the stpes how to do this in XI. The steps i am expecting like how to define the Data Type / Message type / Mapping etc & how to configure the channel ?
The Flat file i want to convert should look like the way IDOC file gets created in FILE FTP port in SAP.
Regards,
UmeshI think there is some confusion... Let me explian my problem once again.
I want to convert the Shipment IDOC as it is the moment the shipment documents gets created in R/3. I dont want to collect many IDOCs & make as single file. For each IDOC it should create a Flat File.
Secondly if i have to MAP the whole IDOC the graphical mapping is too difficult.
So instead of that can i use ABAP/XSLT/JAVA whichever is easy. ?
Since i am ABAPER i can use ABAP mapping.
The Output file should look like as below.
EDI_DC40 9000000000011785526620 3012 OILSHI01 OILSH1 SAPP01 LS SAPCLNT900 A000000018LS WBIMQSI 20071031161506 20071031161506
E2OILSH001 90000000000117855260000010000000250 1011537344 1101 1 300X1 TRKGMKG 0202KG KG X ZTLF X XX 000 BLX X X60002200710310000002007103100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 E2OILSA 9000000000011785526000002000001031011537344000001SP 0000201496000000000000000000 00 00 V E2OILSA 9000000000011785526000003000001031011537344000002SP 0000201496000000000000000000 00 00 S
E2OILSV 900000000001178552600000400000103MH04CG6052 LPBW50D62401033 000020149601KG KGM 35200.00000 17200.00000 18000.00000 0.000 0.000 0.000 DLLPGB220071031000000 00000000000000000000000000000000000 0000XX 6000AAAA0.00000 0.00000 17200.00000 35200.00000 18000.00000 MH04CG6052 new bulk tender approved rs LPG Bulk Lorry - WR Refinery TPP BABA TRANSLINES kg kg 0.000 0.00 0.00 E2OILSC 9000000000011785526000005000004041 001 18000.000000 18000.000000 35200.000000 0.000000 0.000000 KG E2OILSQ001 9000000000011785526000006000005050011 MH04CG6052MH04CG60521J 05041089055000 00000118000.0000000 KG 18000.000000 18000.000000 6000V04 18000.000 KGM18000.000 KGM00000000 V 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0001 E2OILS2 9000000000011785526000007000004040001000001000200020000.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 XX0000000000000000000000000000 XX0504108905J5000 PUNE LPG BOTTLING PLANT START 0001 1END 0001 10.000000 0.000000 0.000000 0.000000 0.000000 0.000000
Pl. Help me its Urgent.
Regards,
Umesh -
How to convert Ms Word (.doc) file to Protected pdf
Hi all,
Is anybody out there could help me on how to convert Ms Word (.doc) file to protected pdf file using java? May be there are some jar file I need to download or any tools you used before? Thanks in advance... =)Hi all,
Is anybody out there could help me on how to convert
Ms Word (.doc) file to protected pdf file using java?
May be there are some jar file I need to download or
any tools you used before? Thanks in advance... =)Hi All,
Thanks for your replies..I think i almost find the solution. I found 2 options to do this. They are :
1. Get Adobe Acrobat and it's SDK (has to buy)
2. Get OpenOffice 2.0.4 and it's SDK (opensource)
So, i do option 2. I install them in my system.then i call them from my ide. Then i follow the code from this link..
http://weblogs.java.net/blog/tchangu/archive/2005/12/open_office_jav_1.html
Thanx.. =) -
How can i open pc .swf files
How do I open PC .swf files? Dialogue message:The document “Chapter7_review.swf” could not be opened. AppleScript Editor cannot open files in the “AppleScript Editor Document” format."
It's normally adobe flash format.
If you don't want to install flash (Lion does not install it) use the 'google chrome' browser which has it's own flash player.
I use Lion > Safari > with No Flash installed and just use the develop menu option to open the page in chrome if necessary.. -
How to convert bytes[] into multipage File object
Hi,
How to convert bytes[] into multipage File object??
I used the java.io.SequenceInputStream to concatenate two input streams (basically .pdf files) into a single input stream. I need to create a single multipage pdf file using this input stream.
Thanks for you help in advance..Only text format allows you to concatenate two files together to get a longer files.
Most formats have a header and a footer and so you cannot simply add one to the other.
You need to use a PDF API which will allow you to build the new document (if one exists) -
How can I call in swf file to movie clip?
Hi all ...
This is my first post for advise, although fairly conversant
with flash and as2.
I am developing a new full screen background style website
and have menu buttons contained within a movie clip (nav_c1) ...
this re-aligns to the top centre of a page when user scales the
browser window.
I then have the content area (centre_content) movie clip ...
this realigns to the centre of the page when a user scales the
browser window.
I have scripted the menu buttons to goto a labelled frame in
the main timeline but I need, when at the labelled frame, to be
able to call/load in an external swf file to play 'inside' the
centre_content movie clip?
for example:
If I click my news button the flash file moves to the frame
label news on the main timeline. This then shows a duplicate of the
moive clip 'centre_content' which is called 'centre_news'. I need
to be able to call/load an external news.swf, containing all the
animated news info, to sit and play 'within' the movie clip
'centre_news' ... so that it is effectively contained 'within' the
movie clip file but loaded in place from an external swf file.
Can anyone help please?
I can post a rough working example online if need be.
Many thanks
A puzzled Adrian
ps: I don't think I am needing to load the swf to a level 1
area as I have tried this and instead of the swf file being loaded
and contained within my movie clip file/area it instead seems to
sit fixed on the main timeline (ie: not contained within the movie
clip area).Thanks Sketchsta for you code. This looks like we're on the
right lines as I see what the code is trying to do.
Unfortunately though I can't seem to get this to work?
I created a new file to get rid of other scripting that was
going on and have placed a movie clip called centre_content onto
the main timeline in frame 1 ... then I have applied your script to
an actions frame above the movie clip also on frame 1. I change the
path_to_file line with my swf name (callin.swf) which is a 1 frame
flash file with some text on it ...
... but it doesn't bring in the callin.swf file ... it just
shows the centre_content clip.
Am i doing anything wrong?
I also tried putting the script onto the first frame inside
the centre_content movie clip but this doesn't appear to work
either.
Regarding the pre-loader ... can I simply build this into the
swf file that is being called in to the movie clip?
Thanks in advance for your support, it is much appreciated.
Adrian
Maybe you are looking for
-
Do u have to have a computer/pc to use home sharing? I have apple tv not sure if it's 2nd or 3rd generation or even if it's first generation. My laptop is broken and in the shop, can I run my apple tv off my iPad?
-
Zen Vision M static sounding while playi
I have a 30gb Zen Vision M and I love the heck out of this thing! I've always been devoted to Creative like a fanboy. I've had a few problems with my Micros(plural, at least 2, both broke cause I'm clumsy) and my original MuVo. Anyways, I've dropped
-
I had the folder icon show up and the unhappy ipod.... This is the second generation 10 gig ipod.. believe it or not it still holds a charge... I can't reset or get to disk mode.... any help would be great
-
Nokia 5800XM Homescreen not Working!!!
I have recently updated my Nokia 5800 XM as follows: Software version: V31.0.101 Software version date: 16-09-2009 Custom version: 31.0.101.001.01 Custom version date: 16-09-2009 Language set: 11 Model: 5800 XpressMusic Type: RM-356 Latest update: 11
-
HD Override no longer working; how do I fix this?
My HD override was working fine for the past 2 years. All of a sudden sometime this past week, the non-HD shows and channels now have black bars on the top, bottom, and/or sides of the screen. Even some programming (non-commercial) on HD channels is