How to convert .fla to .swf from cli

I am working on a project where we want to parameterize certain variables of a flash file. The idea is: we create a script which replaces the parameters in the .fla file.
The question is: How can I convert that file to a .swf using a script or batch file.
(I know how to do it with CS4 Flash etc., but I do not want to open it at all, the entire process should be executed programatically).
I have found many software to convert swf to fla, but not the other way around.
Thanks for your help

To create an swf from an fla you need software that can compile the fla file, and you can probably guess what that software is.

Similar Messages

How to convert Fla or SWF file in to 70 mm theatricla movie.(cinema)

this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
Manoj

Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.

How to convert Fla or SWF file in to 70 MM movie(cinema)

this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
Manoj

Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.

How to convert LV Vi's from LV 7.0 to higher versions or viceversa.I need the steps.

For example i have labview 7.0 and i wan to open in LV 8.0 or still higher..so how to convert my VIs to higher versions or vice versa..I need the steps to convert.

Hello,
If you want to convert a vi written in LV 7.0 to a higher version (say 8.5) open the vi written in 7.0 with 8.5 and then save the same. (once you save it to 8.5, you can not open it with 7.0 since 8.5 is higher than 7.0. So male sure to back up your 7.0 version files)
Now to convert a vi from 8.5 to 7.0 (for example) it gets a litle complicated becase you have load the vi in LV8.5 and then select the option File-->Save for Previous version and select the appropriate option (like 8.2, 8.0 or any other that gets populated in the drop down menu).
Now say that you have selected the option 8.0, Again the vi saved in 8.0 and follow the same procedure to save it to 7.0 version of labVIEW.
The reason i said it gets complicated becasue you must have installed all the version of labVIEW (in the above case its LV 8.0) for a sucessful downgrade.
Hope this helps you out
Guru
Regards
Guru (CLA)

How to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format

Hi All,
I have a requirement in my project like to convert the date time from one format to another.my situation is like to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format. I am using the soa suite 11.1.1.6.
Can any one suggest me how to convert in the BPEL transformation.
Thanks,
Sanju.

Hi Sanju,
Store the date to be converted into a variable viz. dateVar. Now, process an expression in assign as: xp20:format-dateTime($dateVar,'[Y0001]-[M01]-[D01] [h]:[m01]:[s01]').
Regards

How to convert chinese letlers received from a device to understandable information?

Hello,
I would like to read from a sound level meter, I'm using VISA functions, but when I run the VI at first the information received is in chinese and I didn't find how to convert it so as to be able to read an understandable data.
What can I do to read properly the data sent by the sound level meter?
Here is a photo of the problem and the VI I conceived.
Thank you in advance for your help.
Pièces jointes :
communication série RS232 avec le sonomètre.vi ‏33 KB

Hello Yasmine,
Thank you for posting.
Can you post a photo of the issue. Have you tried to change the language of your instrument ?
Regards,
Isabelle G.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

How to convert Sequence file documentation from TXT or HTML to MS Word ?

Hello, I would like to modify a DocSupport.prj which in default generate only TXT or HTML to support MS Wors *.DOC. I have already change the dialog (add *.doc filter..), that was simple. But the major problem is how to convert the output from doc.c to some *.doc file. I found somewhere here Word9 ActiveX Instrument for CVI, but I don't understand, how the CVI gets informations about the steps etc. from *.seq file for another use. The original code in doc.c is quite hard to understand it quickly. Thanks for help.

Hi Pet007,
You should be able to just change the file it saves to's extension to .doc. You'll notice there is a define for txt, you could either change this to doc or if you still want to be able to use txt, create a new define and use this. If you do this you'll need to also add a define above (as you see it defines an integer for each different format type and uses those throughout the program as well). That should give you a good starting point for modifying this code. Unfortunately it is quite extensive to actually accomplish this, or else I could give a step by step guide, but it is rather long. But you should be able to get it working from this. The reason this should work is because Microsoft Word (.doc) files understand plain text just like .txt files. However, if you want to add formatting (fonts, bold text, etc) you would need to use the ActiveX Instrument for CVI which just access the ActiveX server from Microsoft. For more information about ActiveX in CVI visit the following link.
Using LabWindows/CVI as an ActiveX Automation Controller to Control Automation ServersAlso, this link gives an example of using Excel with CVI through ActiveX, which may give you some useful information about doing this type of thing.
Embed Excel ActiveX Documents on a CVI PanelFor more information on using Word's ActiveX Server, check out the following Microsoft Portal.
Word Developer Portal
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

How to convert .fla files in .jpg or .pdf ????

Hello to all ,
I am using c# window application 3.5 .I want to convert .fla files to .jpg or another format so please guide me ??????

i'm not sure what you're trying to do but:
1. if you have flash pro, you can open the fla and publish bitmaps of any display object
2. rename the fla extension to zip and unzip it to utilize its bitmaps.

Convert .fla or .swf to a print file?

Our reviewers want to see online courses in a print format.
Is there any way to export a Flash course (all frames) into a PDF
or other printable file? The only way I know is to screen capture
each frame (ugh!), which is inefficient at best.
I downloaded the trial version of FlashPaper, and this does
not do what I need it to -- it converts only one frame of Flash
into a .pdf, and its primary function is to convert printable docs
into a format that Flash can use.
Any and all suggestions are much appreciated. Thanks.

Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.

How do I export a SWF from CS4 and make it viewable for clients?

I'm currently using Indesign CS4 and just learned how to export an animated file as a SWF file. Once exported I have both a SWF file and a HTML file, however when I send either file to a client they don't open. How to I format the file for customer viewing?
Thank you

Thank you so much that worked. Is there a more professional way to send a client a link instead of two files? I can just see the confusion from it. Thank
you again.

How to convert muti-byte characters from US7ASCII database to UTF-8

Hi Guys,
We have a source database with CHARCTERSET as US7ASCII and our traget database has characterset of UTF-8. We have "©" symbol in the source databse and when we are inserting this value into our target database it is being converted as "¿".
How can get make sure that "©" symbol is inserted on the target database. Both the databases are on version 10.2 but have a different CHARACTERSET. In the oracle documentation it mentioned that if the target database characterset is not a superset of source database characterset then this will happen but in our case UTF-8 is a superset of US7ASCII.
Thanks,
Ramu Kalvakuntla
Edited by: user11905624 on Sep 15, 2009 2:58 PM

user11905624 wrote:
When I tried the DUMP('COLUMN','1016), this is what I got:
Typ=96 Len=1 CharacterSet=US7ASCII: a9Considering 7-bit ASCII standard character set, the code 0xA9 is invalid.
This has likely happened due to a pass-through scenario. See [NLS_LANG FAQ|http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm] (example of wrong setup). E.g. Windows 125x code pages all defines a character 'copyright sign' with encoding A9.
If proper char set conversion takes place, I would expect (illegal) codes 0x80-FF to be "catched" and converted to replacement character (like U+fffd).
Going back to the issue, how exactly are you transfering data or retrieving and inserting from source to target database?
Edited by: orafad on Sep 17, 2009 10:56 PM

How to convert data when transferring from one table to another

I have two tables and these are the structure of the tables
create table E1(
ID NUMBER
,NAME VARCHAR2(30)
, DESIGNATION VARCHAR2(30)
,GENDER VARCHAR2(10));
create table E2(
ID NUMBER
,NAME VARCHAR2(30)
, DESIGNATION VARCHAR2(3)
,GENDER NUMBER); Now I want to transfer records from one table to another using a master tables where data are compared because the datatypes in tables are different
The first one is a gender table to match the gender and convert
create table Gender(
E1 varchar2(10),
E2 number);The second is for the designation
create table Designation(
E1 varchar2(30),
E2 varchar2(3);How to match and convert the data so that it can be transfered.

Peeyush wrote:
Can we do it with the help of a cursor.
All SQL executed by the database are parsed as cursors and executed as cursors.
I mean I have to insert data in bulk and I want to use cursor for it.The read and write (select and insert) are done by the SQL engine. The read part reads data and passes it to the write part that inserts the data.
Now why would using PL/SQL and bulk processing make this faster? It will reside in-between the read part and the write part being done by the SQL engine.
So the SQL engine reads the data. This then travels all the way to the PL/SQL engine as a bulk collect. PL./SQL then issues an insert (the write part to be done by the SQL engine). And now this very same data travels all the way from the PL/SQL engine to the SQL engine for insertion.
So just how is this approach, where you add extra travel time to data, faster?
and i want to commit the transaction after every 50 recordsWhy? What makes you think this is better? What makes you think you have a problem with not committing every 50 rows?

Converting .fla or .swf to .mov (Quicktime)

I've read the thread about Quicktime 7.3.1 which I have not supporting Flash files. That being said, is there anyway to open a .swf or .fla file and convert to .mov to be used with Final Cut Pro?
Thanks in advance,
Shelley

If you have the Perian component. You can open a flv in quicktime and then export it to a format/code that FCP understands.
http://perian.org/
Quicktime no longer allows flash track. Meaning, you can't open .swf in Qt. Even if the flash track track is version 5 or below.
You can open a .swf in the Flash program and then export it to Quicktime movie.

How to convert Panasonic *.RW2 files from a Lumix FZ200 camera?

I have installed DNG Converter 7.3 under Windows 7 (64 bit) but DNG does not recognize those files.
Is there a solution?
Does adobe plan to upgrade DNG converter to include such unsupported files?
thanks
Brian D

Greetings,
I'm also having a problem with files from the FZ200. I can successfully convert the RW2 files to .DNG using the converter. However, when i try to import the new .DNG file into GIMP 2.8, it is imported at 256x192 pixels. it is still 11mg or so, but the resolution is poor. Does anyone know how to import converted RAW files into GIMP?

How to convert analog SD video from VCR tapes to DVD

What is the simplest way to convert analog SD video signals from VCR tapes for input to a mac intel mini so that I can create DVDs? Any help would be appreciated.
Owen

not sure about doing it on a mac mini, but based on the costs of the equipment needed to do it and the time, your best bet is to take your vcr tapes to costco and let them transfer them to DVD...
then editing pieces of the dvd's to make a compilation would be fairly easy using any number of software tools for the mac.

How to convert .fla to .swf from cli

Similar Messages

Maybe you are looking for