How to convert flv into mp3 -- please help!

hi,
i'm very new to using videos in flash. i uploaded a video into flash in order to add texts to it to upload later to web. my problem is converting the fla file to mp3. i tried the video encoder but i'm stuck. please help if you can..it'll be very much appreciated. thanks!

i think i see where the problem lies. the file i worked on in flash (i inserted some texts into the video) are saving as .fla. how do i get it to change to flv in order to use the service you suggested? thanks a bunch!

Similar Messages

How to convert report into alvgrid please hepl

how to convert report into alvgrid please hepl

BALVSD01 check this program u will know r see below code
sample prog
REPORT ZMAT11 .
TYPE-POOLS : slis.
TABLES : mkpf,
 mseg,
 t001w,
 t001l.
TYPES : BEGIN OF ty_t001w,
 werks TYPE t001w-werks,
 name1 TYPE t001w-name1,
 END OF ty_t001w,
 BEGIN OF ty_makt,
 matnr TYPE makt-matnr,
 maktx TYPE makt-maktx,
 END OF ty_makt,
 BEGIN OF ty_t001l,
 lgort TYPE t001l-lgort,
 lgobe TYPE t001l-lgobe,
 END OF ty_t001l.
DATA : BEGIN OF it_mat OCCURS 0,
 mblnr LIKE mseg-mblnr,
 zeile LIKE mseg-zeile,
 mjahr LIKE mseg-mjahr,
 bldat LIKE mkpf-bldat,
 budat LIKE mkpf-budat,
 bwart LIKE mseg-bwart,
 matnr LIKE mseg-matnr,
 maktx LIKE makt-maktx,
 erfmg LIKE mseg-erfmg,
 erfme LIKE mseg-erfme,
 werks LIKE mseg-werks,
 name1 LIKE t001w-name1,
 lgort LIKE mseg-lgort,
 lgobe LIKE t001l-lgobe,
 umwrk LIKE mseg-umwrk,
 name2 LIKE t001w-name1,
 umlgo LIKE mseg-umlgo,
 lgobe1 LIKE t001l-lgobe,
 END OF it_mat.
DATA : it_t001w TYPE TABLE OF ty_t001w
 WITH HEADER LINE,
 it_makt TYPE TABLE OF ty_makt
 WITH HEADER LINE,
 it_t001l TYPE TABLE OF ty_t001l
 WITH HEADER LINE.
DATA : ls_layout TYPE slis_layout_alv,
 it_fcat TYPE slis_t_fieldcat_alv ,
 wa_fcat TYPE slis_fieldcat_alv,
 lh TYPE slis_t_listheader,
 ls TYPE slis_listheader,
 it_events TYPE slis_t_event ,
 ls_event TYPE slis_alv_event ,
 w_var TYPE i.
DATA : l_date(10).
DATA : l_date1(20),
 ztabix LIKE sy-tabix.
DATA : l_repid LIKE trdir-name.
l_repid = 'ZMAT11'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_werks FOR mseg-werks,
 s_lgort FOR mseg-lgort,
 s_umwrk FOR mseg-umwrk,
 s_umlgo FOR mseg-umlgo,
 s_bwart FOR mseg-bwart,
 s_budat FOR mkpf-budat,
 s_mjahr FOR mkpf-mjahr.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
SELECT SINGLE * FROM t001w INTO t001w
 WHERE werks IN s_werks.
IF sy-subrc <> 0.
 MESSAGE e000(8i) WITH 'Enter a Valid Supplying Plant'.
ENDIF.
SELECT SINGLE * FROM t001w INTO t001w
 WHERE werks IN s_umwrk.
IF sy-subrc <> 0.
 MESSAGE e000(8i) WITH 'Enter a Valid Receiving Plant'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
 WHERE lgort IN s_lgort.
IF sy-subrc <> 0.
 MESSAGE e000(8i) WITH 'Enter a Valid Supplying St.Loc'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
 WHERE lgort IN s_umlgo.
IF sy-subrc <> 0.
 MESSAGE e000(8i) WITH 'Enter a Valid Receiving St.Loc'.
ENDIF.
START-OF-SELECTION.
ls-typ = 'H'.
ls-info = 'Material Document List'.
APPEND ls TO lh.
ls-typ = 'S'.
WRITE: sy-datum TO l_date USING EDIT MASK '__/__/____'.
CONCATENATE 'DATE :' l_date INTO l_date1 SEPARATED BY space.
ls-info = l_date1.
APPEND ls TO lh.
PERFORM field_cat.
PERFORM f001_get_data.
END-OF-SELECTION.
IF it_mat[] IS INITIAL.
 MESSAGE i000(8i) WITH 'No data Found'(m01).
 EXIT.
ENDIF.
PERFORM process_data.
PERFORM display_data.
*& Form f001_get_data
 text
--> p1 text
<-- p2 text
FORM f001_get_data .
SELECT amblnr azeile amjahr abwart a~matnr
 aerfmg aerfme awerks algort aumwrk aumlgo
 b~budat
 b~bldat INTO CORRESPONDING FIELDS OF TABLE it_mat
 FROM mseg AS a
 INNER JOIN mkpf AS b
 ON amblnr = bmblnr
 AND amjahr = bmjahr
 CLIENT SPECIFIED
 WHERE a~mandt EQ sy-mandt
 AND a~werks IN s_werks
 AND a~lgort IN s_lgort
 AND a~umwrk IN s_umwrk
 AND a~umlgo IN s_umlgo
 AND a~bwart IN s_bwart
 AND b~budat IN s_budat
 AND b~mjahr IN s_mjahr.
IF sy-subrc = 0.
 SELECT matnr maktx INTO TABLE it_makt FROM makt
 CLIENT SPECIFIED
 FOR ALL ENTRIES IN it_mat
 WHERE mandt EQ sy-mandt
 AND matnr = it_mat-matnr.
ENDIF.
SELECT werks name1 INTO TABLE it_t001w FROM t001w
CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
 MESSAGE i000(8i) WITH 'No Plant Found'(m02).
ENDIF.
SELECT lgort lgobe INTO TABLE it_t001l FROM t001l
CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
 MESSAGE i000(8i) WITH 'No Storage Location Found'(m03).
ENDIF.
ENDFORM. " f001_get_data
*& Form field_cat
 text
--> p1 text
<-- p2 text
FORM field_cat .
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MBLNR'.
wa_fcat-key = 'X'.
wa_fcat-hotspot = 'X'.
wa_fcat-ref_fieldname = 'MBLNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material Doc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ZEILE'.
wa_fcat-ref_fieldname = 'ZEILE'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Item No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MJAHR'.
wa_fcat-ref_fieldname = 'MJAHR'.
wa_fcat-ref_tabname = 'MSEG'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BWART'.
wa_fcat-ref_fieldname = 'BWART'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Mvmt Type'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BLDAT'.
wa_fcat-ref_fieldname = 'BLDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Document Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BUDAT'.
wa_fcat-ref_fieldname = 'BUDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Posting Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-ref_fieldname = 'MAKTX'.
wa_fcat-ref_tabname = 'MAKT'.
wa_fcat-seltext_m = 'Material Description'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFMG'.
wa_fcat-ref_fieldname = 'ERFMG'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Quantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFME'.
wa_fcat-ref_fieldname = 'ERFME'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Uom'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Supplying Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME1'.
wa_fcat-seltext_m = 'S.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGORT'.
wa_fcat-seltext_m = 'Supplying St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE'.
wa_fcat-seltext_m = 'Su.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMWRK'.
wa_fcat-seltext_m = 'Receiving Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME2'.
wa_fcat-seltext_m = 'R.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMLGO'.
wa_fcat-seltext_m = 'Receiving St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE1'.
wa_fcat-seltext_m = 'Re.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
ENDFORM. " field_cat
*& Form process_data
 text
--> p1 text
<-- p2 text
FORM process_data .
LOOP AT it_mat.
 ztabix = sy-tabix.
 READ TABLE it_makt WITH KEY matnr = it_mat-matnr.
 IF sy-subrc = 0.
 it_mat-maktx = it_makt-maktx.
 ENDIF.
 IF it_mat-bwart+2(1) = '2'.
 it_mat-erfmg = - ( it_mat-erfmg ).
 ENDIF.
 READ TABLE it_t001w WITH KEY werks = it_mat-werks.
 IF sy-subrc = 0.
 it_mat-name1 = it_t001w-name1.
 ENDIF.
 READ TABLE it_t001w WITH KEY werks = it_mat-umwrk.
 IF sy-subrc = 0.
 it_mat-name2 = it_t001w-name1.
 ENDIF.
 READ TABLE it_t001l WITH KEY lgort = it_mat-lgort.
 IF sy-subrc = 0.
 it_mat-lgobe = it_t001l-lgobe.
 ENDIF.
 READ TABLE it_t001l WITH KEY lgort = it_mat-umlgo.
 IF sy-subrc = 0.
 it_mat-lgobe1 = it_t001l-lgobe.
 ENDIF.
 MODIFY it_mat INDEX ztabix .
ENDLOOP.
ENDFORM. " process_data
*& Form display_data
 text
--> p1 text
<-- p2 text
FORM display_data .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 i_callback_program = l_repid
 I_CALLBACK_PF_STATUS_SET = ' '
 i_callback_user_command = 'LINE'
 i_callback_top_of_page = 'TOP'
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT =
 it_fieldcat = it_fcat
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT =
 it_events =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 I_HTML_HEIGHT_TOP =
 I_HTML_HEIGHT_END =
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 t_outtab = it_mat
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_data
*& Form TOP
 text
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = lh
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM. "TOP

Premiere elements 2.0 how to convert mpeg to avi PLEASE HELP

Here is my problem, I am putting together a hi light video for my sons football seasons. Most of the seasons I have videotaped myself. When I capture the video in Elements it creates several avi files that I can pick and choose from, each file is created from when I pause during recording. I have one seasons worth of videos where I was not the one taping. I have dvd discs that the guy taping gave me. I can put the dvd file into elements and even put it in the time line but it shows up as one long clip....not segmented. It is also an mpeg file. I can use the razor tool to segment it in spots but have no way to convert the file within elements. When I save the project it still stays as one continuous mpeg file in my adobe folder regardless of whether or not I segment it with the razor tool. Oh, and if I haven't made it clear yet I am an Elements idiot. How can I get the files off the dvd to use in the manner in which I need to use them????? Do I have to use a seperate program to make them avi files?????

<[email protected]> wrote in message news:[email protected] > Here is my problem, I am putting together a hi light > video for my sons football seasons. Most of the seasons I > have videotaped myself. When I capture the video in > Elements it creates several avi files that I can pick and > choose from, each file is created from when I pause > during recording. I have one seasons worth of videos > where I was not the one taping. I have dvd discs that the > guy taping gave me. I can put the dvd file into elements > and even put it in the time line but it shows up as one > long clip....not segmented. It is also an mpeg file. I > can use the razor tool to segment it in spots but have no > way to convert the file within elements. When I save the > project it still stays as one continuous mpeg file in my > adobe folder regardless of whether or not I segment it > with the razor tool. Oh, and if I haven't made it clear > yet I am an Elements idiot. How can I get the files off > the dvd to use in the manner in which I need to use > them????? Do I have to use a seperate program to make > them avi files????? If you want to subdivide a file on the timeline in APE 2: (1) Move the Work Area markers on the timeline to include just the portion you wish to export as a separate file. (2) Go to File, Export, Movie (3) In the Settings Window of the Movie Export dialog select: Range, "Work Area Bar" (4) Save the file with the desired name. Repeat as desired to create separate segment video files for each segment you wish to work with separately. When you are all done creating the segment video files, start a new project and assemble the files as desired.

Convert .caf into .mp3

Hi
I have a problem with converting a CAF file into a MP3 file. I used the SpeakHere example and want to send this file. But I didn't figure it out how to convert this into mp3. According to the iPhone Dev docs there's no mp3 functionality...
Does anybody know how to convert it?
Thanks and Regards

You can play mp3s in the simulator but they won't work on the device. If you really want to convert from a .caf, just use the export function of Quicktime.

I am having a problem converting word onto PDF . PDF into word.Please help .I am signed and paid to Feb 2015

Can someone advise me why I am having this problem

Always in the past .I have my Word Document on screen and then I go to
Publish and it atomatically PDF the doc.
The same if I have a PDF to convert to word. I have the PDF on screen and
to the right of my screen it will say Convert .I press on convert it
converts to word
In a message dated 12/17/2014 10:01:32 A.M. Eastern Standard Time,
[email protected] writes:
I am having a problem converting word onto PDF . PDF into word.Please help
.I am signed and paid to Feb 2015
created by florencejohn (https://forums.adobe.com/people/florencejohn)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/7023171#7023171)

How to convert .class into .jar file

Hi,
How to convert .class into .jar file

jsf_VWP5.5.1 wrote:
Hi,
How to convert .class into .jar fileFrom a command prompt, cd to the location of your .class file(s).
If you want to create a simple jar, use: jar -cf Whatever.jar Whatever.class
If you want to compile all .class files in a directory into a jar, use *.class instead.
Now, I'm going to assume you want to create an executable jar... here's how to do that:
1) Create a blank text file; for this example, lets call it main.txt.
2) In the first line of main.txt, type: Main-class: Whatever ('Whatever' should be the name of the class in your program where the main() method is located)
3) Press enter to go to the next line (someone please correct me if I'm wrong, but if you don't insert the line break/CR after the Main-class: statement, this will not work... in my experience, this is true)
4) Make sure you save this file in the same directory as your .class file(s).
5) Type: jar -cmf Whatever.jar main.txt Whatever.class
...and that's about it. For more information on the usage of the jar command and to understand the switches (such as -cmf), try jar --help.
Hope that helps.

How to convert FLV and F4V files to other media formats

How to convert FLV and F4V files to other media formats
Nowadays, every one can download their favorite videos from video sharing websites like YouTube, Hulu, MySpace, Google Video, metacafe, Yahoo! Video, Reuters.com and so on at will. However, these video files we got are usually in the format of FLV, or F4V, which are not workable by most portable devices, or some video players and video editors on our PC. With the intention of solving these problems, this guide will show you how to convert FLV and F4V files to other video and audio formats in detail.
1. Download, install and run Pavtube FLV Converter
As soon as you run this program, the following wine red interface will show up:
2. Add files, set output format and destination folder
Input FLV and F4V files to this program by clicking on “Add” button, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press the output folder to specify the destination folder or just use the path set by default. Moreover, “merge into one file” enables you to combine multiple FLV and F4V files to be as a single file, if you have this needs, just tick it.
3. Set advanced settings
Click “Settings” button, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. on it to optimize the output quality or compress file size.
4. Convert
After all settings are done, you can press “Convert” button to start transferring, and then the following window will show you the conversion info in detail. According to the info you can manage your time and disk space properly.
Pavtube FLV Converter can definitely complete the conversion at a swift speed with excellent quality; also it adopts an advanced audio-video sync technology, so that audio and video match very well in the resulted files. Therefore you need not worry about these issues.
Useful tips:
Free online FLV downloader:
www.convertdirect.com
http://vixy.net/
http://www.videoconverterdownload.com/online-free-flv-converter.html
http://www.flv2mp3.com/
http://www.mediaconverter.org/
http://2conv.com/
http://online.movavi.com/
http://www.youconvertit.com/
http://www.playtube.com/
http://www.convert.net/

Flip4Mac

I can't open Safari. It keeps giving an alert that says, "Suspicious Activity might have been detected." How do I fix this?Please help. thanks!

Safari won't work. It flashes an alert. Alert says that a Suspicious Activity Might Have been Detected. Major Security Issue. How do i fix this? Please help. Thanks!

You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

How to convert rows into columns with decode function

Hi,
How to convert rows into columns with the help of decode function in oracle.
thanks and regards
P Prakash

say
col1 col2
1 10
2 20
3 30
then use
select col1,
sum(decode(col2,10,10)) "new1"
sum(decode(col2,20,20))"new2"
sum(decode(col2,30,30))"new3"
from table_name
group by col1;
we used sum u can use ny function if wont u have to give the column name i.e col2 name also
so i think u got it nw
regards

How to convert smartforms into Adobe forms.

Hi......
How to convert smartforms into Adobe forms.
Regards
Anbu B

Hi,
You need to use the Function Module CONVERT_OTF.
Please check the below code
REPORT zsuresh_test.
Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
Internal tables declaration
Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
This function module call is used to retrieve the name of the Function
module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Calling the SMARTFORM using the function module retrieved above
GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
Printer name to be used is provided in the export parameter
OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = w_cparam
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = w_outoptions
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = T_pdf_tab
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Ruthra

How to convert files into DAT?

Does anyone know how to convert files into DAT? Not The other way around please.

This might do it:
http://www.videoconverterformac.com/dat-converter-for-mac.html
but can't imagine why you would want to!

How to convert bytes[] into File object

hi
how to convert byte array into File object
pls.. help me
Regards
srinu

rrrr007 wrote:
Hi,
How to convert bytes[] into multipage File object?? ]There's no such thing as a "multipage File object." You ought to re-read this thread closely, and read the [API docs for File|http://java.sun.com/javase/6/docs/api/java/io/File.html] to clear up your confusion about what a File object is.
I used the java.io.SequenceInputStream to concatenate two input streams (basically .pdf files) into a single input stream. I need to create a single multipage pdf file using this input stream. Then you need a pdf API, like iText or fop. You can't just concatenate pdf files, word docs, excel sheets, etc., like you can text files. Google for java pdf api.

How to convert rows into column

Hi,
can any one help me how to convert rows into column by pl/sql procedure.
Thanks and Regards

http://www.oracle.com/technology/oramag/code/tips2004/050304.html
-- dropping the sample table if exists
drop table rowstocol
-- create sample table
create table rowstocol ( name varchar2(20));
-- Inserting rows into sample table
insert into rowstocol values('Amit Zhankar');
insert into rowstocol values('Piyu Yawalkar');
insert into rowstocol values('Piyu Yawalkar');
insert into rowstocol values('Ashish Ghelani');
insert into rowstocol values('Aditi Zhankar');
insert into rowstocol values('Tom Kyte');
insert into rowstocol values('Oracle');
-- Following query should be run to create a sql. This result sql should be run to convert rows to column.
-- The following query uses just the tablename (whose data is to be converted) and name of the column (which is to be converted).
-- Example taken here is table rowstocol, column name.
SELECT cc
FROM (select decode(rn ,1 ,'Select ',null) ||' MAX (CASE WHEN dr = '|| rownum||' THEN DECODE (rn,1, col1) END) '||
decode(rn,maxr,' col1 from ','||'||chr(39)||','||chr(39)||'|| ') cc,rn,maxr
from (SELECT ROWNUM rn,count(0) over() maxr FROM rowstocol) order by rn) trows
union all
select '(SELECT tabs.col1, DENSE_RANK () OVER (ORDER BY col1,rowid) dr,dense_rank() OVER (order by 1) rn
FROM (SELECT NAME col1 FROM rowstocol) tabs ) group by rn' cc from dual;
-- The result of this query will do the reqd conversion from row to column.
-- Replace table rowstocol by your table, column name by your column.
CC
Select MAX (CASE WHEN dr = 1 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 2 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 3 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 4 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 5 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 6 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 7 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 8 THEN DECODE (rn,1, col1) END) col1 from
(SELECT tabs.col1, DENSE_RANK () OVER (ORDER BY col1,rowid) dr,dense_rank() OVER (order by 1) rn
FROM (SELECT NAME col1 FROM rowstocol) tabs ) group by rn
Select MAX (CASE WHEN dr = 1 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 2 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 3 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 4 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 5 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 6 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 7 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 8 THEN DECODE (rn,1, col1) END) col1 from
(SELECT tabs.col1, DENSE_RANK () OVER (ORDER BY col1,rowid) dr,dense_rank() OVER (order by 1) rn
FROM (SELECT NAME col1 FROM rowstocol) tabs ) group by rn;
COL1
Aditi Zhankar,Amit Zhankar,Ashish Ghelani,Oracle,Oracle,Piyu Yawalkar,Piyu Yawalkar,Tom Kyte
Edited by: bhooma on Jan 20, 2009 2:44 AM

How to Convert frames into minutes and seconds

Hi,
does anyone know how to convert frames into time (minutes and
seconds). I need the users to view the swf with current time being
played and over time. I have 2152 frames in total and I want that
to be converted to time. Can anyone help me on this. I would really
appreciate it. It is very urgent!!!!
Thanks

Time Indicator,
> does anyone know how to convert frames into time
(minutes
> and seconds).
That depends entirely on the framerate of the movie. At the
default
12fps, 12 frames would be one second; 24 frames would be two.
At 24fps, 24
frames would be one second.
> I need the users to view the swf with current time being
played
> and over time. I have 2152 frames in total and I want
that to be
> converted to time. Can anyone help me on this. I would
really
> appreciate it. It is very urgent!!!!
Judging by your four exclamation points, I'd say it's
definitely urgent!
Well, again, if you're at 12fps, 2152 frames would take 179
seconds, or 2
minutes and 59 seconds. I arrived at that number by dividing
2152 by 12.
Keep in mind, though, framerate is actually more of a
guideline than an
exact figure. Framerate determines the rate at which Flash
will *try* to
display content. On an especially slow computer, the Flash
Player may not
be able to keep up, and the same number of frames might
actually take more
time.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

How to convert byte into string

can any tell me how to convert byte into string
when im an debugging thid code in eclipse it shows the result in integer format instead of string but in command prompt it is showing result in string format..........plz help
package str;
import java.io.*;
public class Testfile {
public static void main(String rags[])
byte b[]=new byte[100];
try{
FileInputStream file=new FileInputStream("abc.txt");
file.read(b,0,50);
catch(Exception e)
System.out.println("Exception is:"+e);
System.out.println(b);
String str=new String(b);
System.out.println(str);
}

Namrata.Kakkar wrote:
errors: count cannot be resolved and Unhandled exception type Unsupported Encoding Exception.
If i write an integer value instead of "count" then Unhandled exception type Unsupported Encoding Exception error is left.This is elementary. You need to go back to [http://java.sun.com/docs/books/tutorial/|http://java.sun.com/docs/books/tutorial/] .

How to convert flv into mp3 -- please help!

Similar Messages

Maybe you are looking for