How to convert from Logic 7.2 to older Logic on PC

I met a producer who wants to work his magic on a track of mine. He uses an older Logic on a PC. I assume I'll give him all my tracks as audio files (Wave?), but it would be nice to keep the MIDI regions as well. Any suggestions for the best process for this?
Thanks in advance!
George

Export a MIDI file containg the tempo, and any MIDI regions, together with the audio files exported track by track starting from 1 1 1 1, together with some docs to tell the guy what's included and what goes where etc.

Similar Messages

How to convert a Logical Standby DB to a Primary

Hi,
I have an issue with our Data Guarded cluster (two nodes, one Primary and one Logical Standby Oracle 10i DBs running on HP-UX 11.23)
The issue is that for some reasons the Primary and the Standby are out of sync in terms of archive log sequences.
For instance the primary shows:
Date: Feb-27-2009 14:02:33
ID DESTINATION STATUS ARCHIVED_THREAD# ARCHIVED_SEQ#
1 /db05/oradata/NSMS/archive/ VALID 1 864
2 stdby VALID 1 10
3 /db05/oradata/NSMS/archive/DR/ VALID 1 11
11 /db05/oradata/NSMS/archive/DR/ VALID 1 864
Report on Redo Log Gaps between Primary and Standby.
Date : Feb-27-2009 14:02:33
LAST_SEQ_RECD LAST_SEQ_SENT
863 864
But the STANDBY shows in the alert log:
LOGMINER: Begin mining logfile: /db05/oradata/NSMS/archive/DR/arch673877647_1_304.log
Fri Feb 27 12:51:36 2009
LOGMINER: End mining logfile: /db05/oradata/NSMS/archive/DR/arch673877647_1_304.log
Fri Feb 27 12:51:36 2009
LOGMINER: Begin mining logfile: /db05/oradata/NSMS/archive/DR/arch673877647_1_305.log
Fri Feb 27 12:51:39 2009
LOGMINER: End mining logfile: /db05/oradata/NSMS/archive/DR/arch673877647_1_305.log
since the DBA_LOGSTDBY_LOG contains on the STANDBY:
$ is_db_apply_current.sh
1 300 595040838 595042886 YES
1 301 595042886 595042919 YES
1 302 595042919 595096418 CURRENT
1 303 595096418 595127201 CURRENT
1 304 595127201 595159342 CURRENT
1 305 595159342 595207457 CURRENT
At this point I don't know how to cleanup the situation on the Standby.
I tried to resync completely form primary copying all datafiles and archives but still cannot reset the archive sequence on the STANDBY, so that it keeps looking for the wrong archives.
Thanks in advance !
Mike

Hi
Problem seems different then post heading."How to convert a logical standby to primary" stepts are follow.
On primary site.
1.On primary site "alter database prepare to switchover to logical standby".
2.On standby site "alter database prepare to switchover to parimary;
3.Check "select switchover_status from v$database to both sites.
4.At primary site When status becomes to_standby then "alter database commit to switchover to logical stanedby".
5.At stndby site "alter database commit to switchover to parimary".
6.After successfully switchover at new logical standby site "alter database stard logical standby apply".
For you problem ,Can you paste following from standby site.
1.select applied_sequence#,last_sequence# V$logstdby_progress.
2.select * from V$logstdby_stats
3.select * from v$archived_log
Also from primary site,
1.select * from v$log.
hope this will help U.
Tinku
Edited by: Tinku on Feb 27, 2009 8:39 PM

Re: How to converting from PL/SQL query to T-SQL query

How to converting from PL/SQL query to T-SQL query... Its Urgent

Download the
SQL Server Migration Assistant for Oracle. It will convert whole Oracle databases, or single queries or PL/SQL stored procedures.
With caution that If your database is using Collation which is case sensitive SSMA will not work.SSMA doesnt guarantees 100% for conversion of Queries/stored proc /database if it fails to do so for some queries you will have to do it manually.
But you can try
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Hi iam new to java can u tell me how to convert from hashmap to string

how to convert from hashmap to string

Hi,
This is not pure Java forum. Its more on JDBC and data connectivity to Orcle db from Java API.
This link may answer your question:
http://stackoverflow.com/questions/960807/hashmapkey-string-value-arraylist-returns-an-object-instead-of-arraylist
Twinkle

How to convert from Restricted material to Unrested Material

Hi Every Body,
I have Posted the Batch Material in MB1C . But it was posted in RESTRICTED IN USE. How to convert from Restrict To UNRESTRICTED IN USE. Can Anybody Help me.

Thank you for solving the problem both SAP Community Network and Mr Jurgen .
suribabu

How to convert from image based pdf to text based pdf

I have Adobe 9 Pro. How to convert from image based pdf to text based pdf? For example, if someone emails a scanned pdf to me, how do I convert that document into a text based pdf?

To perform OCR, open the document and select: Document > OCR Text Recognition > Recognize Text Using OCR
More information on the various options is in the Acrobat help doc.

How to convert from java.lang.Integer to int

Could you please show me
how to convert from java.lang.Integer to int?
and how to convert from java.lang.Integer to String?
Thanks,
Minh

Could you please show me
how to convert from java.lang.Integer to int?
and how to convert from java.lang.Integer to String?Tip: always keep a browser open on the API docs; if you've got a
couple of MBs to spare, download the docs; it's very convenient.
kind regards,
Jos

How to convert from array to graph ?

how to convert from array to graph ?

A graph will accept an array of numbers. Do you have an example of what you are looking for?
And since somebody mentioned tutorials...
3 Hour Introduction
6 Hour Introduction
LabVEW Basics
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Learning NI
Getting Started with NI Products
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to convert from pdf to word

how to convert from pdf to word

If you are using Adobe Acrobat please post here: http://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs
If you are using Adobe Reader and ExportPDF, please read this: http://forums.adobe.com/docs/DOC-1812

How to convert from XML to Array ?

how to convert from XML to Array ?
thanks in advance

this is a segment of the xml object:
var myXML:XML =
<data>
<task>
<taskID>2</taskID>
<startDate>2/15/2007</startDate>
</task>
</data>
i want to conver myXML into ArrayCollection: like this:
private var expenses:Array = [
{taskID:"1", startDate:"2/15/2007"},
{taskID:"2", startDate:"4/15/2007"}
how i can do it ? and tell me how to retrieve the data from
the collection
thanks

How to convert from military time (string) to regular time?

How to convert from military time (string) to regular time?
First of all I need to let you know I'm very new to Crystal Reports, so I apologize and will need detailed instructions if possible.
I have created a Crystal Report pulling information from the received time field. On the report, the time is showing in military time (ex. 16:00:00).
How can I convert this time to normal time (ex. 4:00:00)
Since the field is a 'String' field and not a 'Time' field, I do not have the option of changing it under the field properties.
I hope someone can help with this.
Thank you in advance.

As my fields were date only and not datetime, I ended up using the following,
If IsDate({CallLog.EmailRecdDate}) Then
CDate({CallLog.EmailRecdDate})
Else
CDate(0,0,0)
You answer lead me in the right direction.
I'm still having an issue with the 'Else' statment returning 12:00:00 because of the CDate(0,0,0), but I'm not sure what else I can use to return a blank space on the report. Any ideas?
Thanks again!

How to convert from lowercase letters to uppercase letters?

how to convert from lowercase letters to uppercase letters?

Hi KS,
In the transfer / update rules you can use a formula to convert lowercase to upper case letters.
Functions for Character string>>TOUPPER(CHAR)
Hope this helps.
Bhargava
Message was edited by:
Sista Bhargava Kumar

How to convert from xml file to html using java code

How to convert from xml file to html file using java code

Get yourself Apache Xalan or Saxon or some XSLT processor
String styleSheet = "/YourXSLTStylesheet.xsl";
String dataSource = "/YourXMLDocument.xml";
InputStream stylesheetSource = TransformMe.class.getResourceAsStream(styleSheet);
InputStream dataSourceStream = TransformMe.class.getResourceAsStream(dataSource);
OutputStream transformedOut = new FileOutputStream("filename.html");
TransformerFactory tFactory = TransformerFactory.newInstance();
Transformer transformer = tFactory.newTransformer(new StreamSource(stylesheetSource));
transformer.transform(new StreamSource(dataSourceStream), new StreamResult(transformedOut));You'll also need to learn XSLT if you don't already know that. Here's a good place to start
http://www.w3schools.com/xsl/

How to convert from varchar to blob ?

How to convert from varchar to blob ?
thanks

Here is a small PL/SQL block that we have used to convert varchar2 to blob.
declare
cursor get_blob is
select blob_statement
from report
where report_id = 205
FOR UPDATE OF blob_statement;
v_loc blob;
v_raw_buffer raw(32767);
v_amount binary_integer := 32767;
v_offset binary_integer := 1;
v_buffer VARCHAR2(32767);
begin
open get_blob;
fetch get_blob into v_loc;
close get_blob;
v_buffer := 'Sample text';
v_raw_buffer := utl_raw.cast_to_raw(v_buffer);
v_amount := utl_raw.length(v_raw_buffer);
dbms_lob.write(v_loc, v_amount, v_offset, v_raw_buffer);
commit;
end;

How to convert from Grayscale to single color channel

I hope that someone here might be able to help. I am writing an application which loads in color channels separately, to be merged by the application The images are multi-page TIFF files. The trouble that I am running into is that the application loads the images into grayscale, so when I merge the channels, they are merged as grayscale, not as the correct colors.
I use the following on each color channel to load them in:
public static BufferedImage[] loadTiff(File multiPageFile, int colour) {
    BufferedImage[] img = null;
    ArrayList<BufferedImage> tmp = new ArrayList<BufferedImage>();
    try {
        SeekableStream stream = new FileSeekableStream(multiPageFile);
        String[] names = ImageCodec.getDecoderNames(stream);
        ImageDecoder dec = ImageCodec.createImageDecoder(names[0], stream, null);
        int numPages = dec.getNumPages();
        for (int i=0; i<numPages; i++) {
         try {
                RenderedImage im = dec.decodeAsRenderedImage(i);
                BufferedImage bi = PlanarImage.wrapRenderedImage(im).getAsBufferedImage();
          //In case not all pages are valid images, we use ArrayList as it is dynamic
          tmp.add(bi);
            }catch (RuntimeException re) {
          //Once the exception is caught, we can decode the layer here for whatever means.
    }catch (FileNotFoundException fnfe) {
        System.err.println("File not found.");
        fnfe.printStackTrace();
    }catch (Exception e) {
        System.err.println("General Exception caught");
        e.printStackTrace();
    //Convert to an array to be returned.
    img = new BufferedImage[tmp.size()];
    for (int i=0; i<img.length; i++) {
        img[i] = tmp.get(i);
    return img;
}So a BufferedImage array is returned (one element in the array for each page in the multi-page file). Before I return the BufferedImage array, though, it would be good to convert it to the correct color. I know which channel is currently being loaded. Does anyone have any tips on how to shift from a grayscale intensity to a single color intensity? I have tried a number of things regarding byte shifting, but I am really none the wiser.
I have tried, for example, reading the int color value:
int color = bi.getRGB(w,h);The trouble is that this number is not in the region 0..255, so I don't know how I can use it. If I shift the number:
color = color>>16I get a number smaller than 255 (although it seems to be negative), but I don't know whether I can use this value for a single color channel, i.e. if the current color is red, saying:
Color redC = new Color(color, 0, 0);
bi.setRGB(w,h,redC); //Slow and inefficient. There must be a better way.When I try doing that, I end up with nothing drawn or visible.
Does anyone have any ideas? Thanks in advance.
Edited by: doughnuts64 on Jun 12, 2008 6:27 AM

Thanks for the response. It has been helpful in getting my problem sorted. I was not creating a new BufferedImage - I was just using the one that had been loaded in, and as such had not realised that the type was not TYPE_INT_RGB. As soon as I instantiated a new BufferedImage of the same dimensions and colour TYPE_INT_RGB as you suggested, it worked! So thanks for that.
Whilst that does work, it does slow the application incredibly as it has so much data to cycle through. Ideally, I would be able to load the image in directly as the colour channel in question, rather than loading in as grayscale. This way, the application would only require the amount of time needed to load in the images, not to process them on a pixel-by-pixel basis (typical images are made up of over 16,000,000 pixels for each colour channel, and we typically load two files in at once - both for separate colour channels, so over 32,000,000 pixels to process).
As I am loading in multi-page tiff files, I am having to use the JAI (Java Advanced Imaging) toolkit. I use the following code to load in my multi-page tiff into a BufferedImage array, where each element of the array represents one of the 'pages' in the multi-page tiff file:
SeekableStream stream = new FileSeekableStream(multiPageFile);
String[] names = ImageCodec.getDecoderNames(stream);
ImageDecoder dec = ImageCodec.createImageDecoder(names[0], stream, null);
int numPages = dec.getNumPages();
BufferedImage[] finalImage = new BufferedImage[numPages];
for (int i=0; i<numPages; i++) {
     RenderedImage im = dec.decodeAsRenderedImage(i);
     finalImage[i] = PlanarImage.wrapRenderedImage(im).getAsBufferedImage();
     //...colour changing code currently here - loops through finalImage array, and on every pixel of every layer
...To be able to automatically convert the colour channel without having to loop on every pixel (and thus save an incredible amount of loading time) would be helpful.
Thanks.

How to convert from Logic 7.2 to older Logic on PC

Similar Messages

Maybe you are looking for