How to convert from PAL to NTSC in compressor

I have a project I converted from mp4 file to Apple Pro Res to edit it in FCP. I exported using Compressor and tried to import the files to DVD Studio Pro. It said it can't put PAL files into an NTSC project. I didn't even realize it was filmed in PAL (yes, I have the rights to use the footage). How do I convert the files from PAL to put it into FCP...in Compressor? If so, how? Thanks for any help!

Since you've already edited it, export from fcp (file: export: quicktime movie - NOT quicktime conversion) with current settings. Bring this file into compressor and apply the appropriate dvd preset. Thencustomize the preset, changing the frame rate to 29.97 fps and video format to ntsc in the encoder panel: the pixel dimensions in the geometry panel to 720x480 (not sure if this is necessary, but doublecheck it). Then in the frame controls panel, enable frame controls and change the resize filter to best, and rate conversion to 100% of source and rate conversion to best. This may take a long time to output, so you might want to do a short test by setting an in and out in the compressor preview window.
Hopefully, I haven't left anything out. If there are any questions, post back.

Similar Messages

How do I convert from PAL to NTSC in compressor?

I have a project I converted from mp4 file to Apple Pro Res to edit it in FCP. I exported using Compressor and tried to import the files to DVD Studio Pro. It said it can't put PAL files into an NTSC project. I didn't even realize it was filmed in PAL (yes, I have the rights to use the footage). How do I convert the files from PAL to put it into FCP...in Compressor? If so, how? Thanks for any help!

To convert the 25fps PAL file to a 29.97fps file staying within the ProRes codec:
• Open up compressor. In the Settings window select: Apple>Formats>Quicktime>ProRes 422
• Select the "Duplicate Selected Setting" icon in the upper left of the Settings window
• This creates duplicate of the preset that you can edit
• Select the preset copy and, in Inspector, give it a new name (something like ProRes PAL>NTSC)
• In Encoder>Video Settings>Frame rate - and change the frame rate to 29.97
• In Frame Controls> turn them on and set Resize Filter and Rate Conversion to BETTER. (If so set them to BEST, be prepared for a long wait)
• In the Geometry tab, set the Frame Size to 720x480 (you don't say if the file is 16:9 or 4:3)
• Submit the file and go have dinner. Depending on the length of the file, it may take hours.
Have fun.
x

Grainy Image when converting from PAL to NTSC...

Hi,
I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
Any suggestions?
Thanks and Regards,
Rajnesh

There are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.

Convert from pal to ntsc

Hi folks does anyone know of a way to convert a project created in PAL into NTSC directly in FCP X, I need to produce to versions of the same project to DVD, the PAL version is straight forward export to DVD, but would appreciated any help in being able to do the same but for an NTSC version of teh same project
Thanks in advance

Make a new project. Use custom settings for NTSC. Copy the PAL project and paste it into the NTSC project.
Russ

When to convert from PAL to NTSC?

I want to convert PAL DV movies to NTSC DVDs. Should I do the PAL to NTSC conversion as I export the QT movie, which QT seems capable of, or should I drop the PAL QT movie into Compressor and do the conversion there? Any advise or reports of experience with this process would be appreciated.

Hi
As I know and try, first convert your movie to NTSC and then convert it to MPEG.
converting DV-PAL to MPEG-2 NTSC is taking too long.
good converting takes 1.2 hour to 1 min of video on G5 Dual 2.5GHz.
you can download my compressor droplets (compressor 2).
http://homepage.mac.com/tal_rom/FileSharing7.html
Tal

I want to convert a movie that I've created in iMovie from PAL to NTSC.

I've created a large movie using PAL but now want to convert it to NTSC to send to my family in Canada. It took ages to create. Is there an easy way of doing the conversion? I don't want to have to do it all again.

Hi
A. Using iMovie'08 to 11 - Will not give 100% result - as You want interlaced SD-Video = NTSC
B. Converting from PAL to NTSC - is Never 100% loss free - but You lose a bit
I use iMovie HD6 or FinalCut - as they can deliver 100% over to program that converts.
• iMovie and iDVD can convert - BUT RESULT WILL BE Very POOOOR.
My notes on How I do it
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on Internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on Internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Converting subtitle file length from PAL to NTSC

We're releasing a PAL version of a movie in the UK, whilst another company in the US will issue an NTSC conversion from our PAL master. The NTSC master therefore will run exactly 3.8462% slower than the PAL 25fps master, after standards conversion and speed correction.
We'd like to be able to use our PAL spotted subtitle file for the NTSC release, but I need to know if it's possible to 'stretch' the subtitle file by the required 3.8462% in order for it to match the NTSC running time.
I have tried a shareware app called Subtitler (by exporting the track description file and importing into Subtitler), but it does not allow me to input a stretch as a percentage - merely in frames, seconds, minutes etc, which adds the same amount to each subtitle.
Does anybody out there know of a way to create the modifid subtitle file?

Yes, I have already converted the original supplied .txt file, but (and as with most subtitle files it seems) I have had to tweek it myself and add a whole load more subtitles (directly in DVD Studio Pro), which are translations from Chinese to English, which were not included in the original supplied French to English file (the film is set in China and has both French and Chinese throughout!). I have also created another separate Chinese to English file in DVD Studio Pro. So you see my dilemma...
If only Subtitler was more stable - It crashes every time I import the DVD Studio Pro Item Description file.
A friend converted the original supplied file from PAL to NTSC using the excellent (but PC only) Subtitle Workshop.
I have been in direct contact with the very helpful author of the shareware Subtitler app, and he is working on a revision to fix the bugs.

How can i change pal to ntsc

how can i change Pal to ntsc format.
thanks

I would recommend a free tool called JES Deinterlacer. It will do this.
http://jeschot.home.xs4all.nl/home.html
I should add that if you use PAL clips in an NTSC project in iMovie, they will be automatically converted using an algorithm that duplicates every 5th frame.

What's the cleanest workflow from PAL to NTSC?

Hi. I'm shooting in Iceland and editing in the States. Can anyone make a recommendation about the cleanest workflow from PAL to NTSC? I'll be shooting with an HD camera. Thanks!

What kind of HD?
There are about 6 million flavors - some really are HD, others use the term more as a marketing gimmick.
Why not just hire a camera that shoots the format and frame rate that you will be editing with? Granted, it might be difficult to find a camera compatible with US standards in Iceland, after all there are only 320 000 people living there. Plenty of rental places in the US though.
The cleanest workflow from PAL to NTSC is by using facility with a hardware converter such as those from Teranex or Snell & Wilcox. You will get a professional standards conversion engineer thrown in but the price will far outweigh what you will pay to hire a camera.
Other options, depending on what kind of quality is acceptable to you:
Compressor - You already have it. Will give you very good results but take a long time to process.
Natress Standards Conversion: $100. Will give you very good results but take a long time to process.
JES Deinterlacer: Free. Will give you decent results but take a long time to process.

Transcoding clip from PAL to NTSC

Hi, just my second discussion post so sorry if this question has been answered a zillion times before.
I need to buy a short stock footage clip that was shot in PAL DV (Standard Definition) at 720 x 576 @ 25 frames per second. I want to transcode to NTSC DV 720 x 480 @ 29.97 fps in PE 4 (by importing into a project and rendering it). Then I will use that transcoded clip in my project.
Before I buy this clip, I thought I'd ask if I can expect reasonable quality or if there are any things to watch out for. I'm assuming I can do what I describe above.
Thanks!
Steve

The conversion from PAL to NTSC can be a tough one, even with professional level software, Steve. As you indicated, it means not only changing the frame size (and pixel dimension) but also changing the frame rate -- which can often result in jiggliness.
Although officially possible, it's usually a pretty ugly transition. I don't know how much you're paying for this piece, but it might be worth challenging your provider to give it to you in acceptable NTSC format before you lay out the money.

Re: How to converting from PL/SQL query to T-SQL query

How to converting from PL/SQL query to T-SQL query... Its Urgent

Download the
SQL Server Migration Assistant for Oracle. It will convert whole Oracle databases, or single queries or PL/SQL stored procedures.
With caution that If your database is using Collation which is case sensitive SSMA will not work.SSMA doesnt guarantees 100% for conversion of Queries/stored proc /database if it fails to do so for some queries you will have to do it manually.
But you can try
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Hi iam new to java can u tell me how to convert from hashmap to string

how to convert from hashmap to string

Hi,
This is not pure Java forum. Its more on JDBC and data connectivity to Orcle db from Java API.
This link may answer your question:
http://stackoverflow.com/questions/960807/hashmapkey-string-value-arraylist-returns-an-object-instead-of-arraylist
Twinkle

Changing an existing DVD from PAL to NTSC

I have just created, and burned, a DVD in iDVD 7.0.4 in my default setting of PAL.
Now I want to print one in NTSC format. I went to Project Information and changed the setting from PAL to NTSC, read the warning given that it would rerender my assets, and clicked OK. I waited for something to happen, and when nothing did, I tried to burn the DVD, assuming it had changed what was necessary. I got the message 'You are burning a PAL movie to an NTSC disc. Do you want to proceed?' I'm using the same discs I always do: DVD-R. I've made no change. Can anyone help, please? I'm on an iMac running Snow Leopard. Many thanks.

Thank you! In desperation, I tried just that. I opened a new iDVD project, set it for NTSC, and imported the movie I wanted to burn from iMovie (where I made it in the first place). I've just burned the new disc and I can't view it on my screen - which is promising. Does this tell me that it's worked - that I've produced an NTSC video??!

G_converter from PAL to NTSC

Does anyone know the time frame to render for G_converter?
I render a 2hr show from PAL to NTSC & it takes 33hrs. Is this the correct #?
thankx
JP
Dual G5, 3GB memory, BlackMagic SDI card,dual Apple cinema 23 Mac OS X (10.4.2)

Sounds about right......what is the speed of your processor?
It took 25 seconds to render a 3 second clip...on a G4 dual 1.25. That is about 7.1 times as long as the clip. But depending on other factors, like what other filters you have on the cips, can make the render longer.
Shane
"There's no need to fear, UNDERDOG is here!"

How to convert from Restricted material to Unrested Material

Hi Every Body,
I have Posted the Batch Material in MB1C . But it was posted in RESTRICTED IN USE. How to convert from Restrict To UNRESTRICTED IN USE. Can Anybody Help me.

Thank you for solving the problem both SAP Community Network and Mr Jurgen .
suribabu

How to convert from PAL to NTSC in compressor

Similar Messages

Maybe you are looking for