How to convert images which is not supported by the ImageIO?
I have made one project.
In that i have used some images and render them on some screen.
Now there are many images which is not supported by the ImageIO class bcz its showing me exception like
javax.imageio.IIOException: Unsupported Image Typeso what to do to render this images or can i convert this kind of images to supported images?
is there anything which can render this kind of images.
Edited by: Nitz_09 on May 24, 2010 2:12 AM
CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras
Similar Messages
-
I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please helpCR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed. -
what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"
It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian -
How to push apps which are not available in the App Store?
Hi :-)
I've got one question: I would like to push apps via profile manager to different devices, which are not available in the App Store, so I can not buy them via VPP.
Example: TeamViewer for OS X.You can't. Use something like Apple Remote Desktop.
-
How to use Fonts which are not installed on the users computer?
I need to use various fonts in an applet without forcing the user to install them. I have found this method
createFont(int fontFormat, InputStream fontStream)
Returns a new Font with the specified font type and input data.
How can I use this or any other routines to catch the font placed somewhere on the internet?
Sincerely,
Trevor HardcastleIn java 1.3.1, the type parameter has to be Font.TRUE_TYPE, which just leaves you with the problem of determining the correct fontStream parameter. You can easily obtain an InputStream for a remote resource by creating a URL to the resource (which presumably must specify a .TTF font file), and then using the method URL.openStream().
Be aware, however, that if you want to access URLs from within an applet, then there are security implications of trying to retrieve data from remote machines other that the one directly hosting the applet (read up on applets and security policies). -
If I do need to go back a version, any suggestions or links on doing this w/o losing any bookmarks or settings? Complete uninstall/reinstall? I've not had to do this kind of thing before. Thanks!
You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side. -
How to install printer which is not listed in the software list
I just bought Canon MX372 and I am having a hard time installing it. I have installed the software that came with it and yet I can't add it as printer?
It is always giving me a msg to update the software and when I accept to update it takes a minute and then says software is not available?!!
any idea what is going on?Okay.
First, got any third-party login items? If so, disable them (and list here for info).
Got any other third-party software that might impact printing?
Then try this:
Keep the installer or dmg you just downloaded from Apple if you haven't already trashed it.
If you haven't done so, repair permissions on startup drive and reset PRAM.
Then go to Print & Scan prefs and delete any printers.
Then go to Macintosh HD/Library/Printers. (You will have to enter password to authorize this)
Restart.
Be sure printer is connected (hard wired, not wireless) and turned on.
Then reinstall Canon drivers downloaded from Apple, restart, and attempt to install printer. -
Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.
In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives, states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX.. That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions... -
i am trying to watch a movie but a box pops up saying "This movie requires QuickTime, which is not supported by this version of iTunes." how do i fix this
Try installing the most recent version of the QuickTime Player for Windows:
http://www.apple.com/quicktime/download/ -
How to extract data using DSources which do not support Delta
Hi forum,
Iam using a data source which does not support delta. In such a scenario what should i do For subsequent extractions.Will i have to opt for full load every time, if so then how will the double data records be treated. Pls help me out of this situation. In RSA6 if i click on the data source there i can find a check box for enabling delta , but again that is greyed out. If i want to change that what steps should i follow.
All the helpfull answers and solutions would be thanked by assigning full points.
Regards
PallaviCan you give me the data source name please.
If it is a standard Business Content Datasource and it does not support delta(or delta is not enabled) then you dont have any choice to modify the standard Datasources. In such cases you can create a Generic DS same as Standard DS and enable delta.
Hope this helps.
Praveen -
I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Lightroom." How can I import please?
Hi,
I assume you mean the Nikon D810 because D800/800E support has been there since Lightroom 4.1
Currently, because it is a new camera (D810) the only support is in a RC of ACR 8.6 for Photoshop CS6 and CC, as the RC runs out on 31 August it is expected support will be there in the next dot release of Lightroom.
Current limitations are that only full sized NEF is supported.
If you wish to import to Lightroom 5.5. you will need to download the DNG Converter v8.6RC and convert the NEF files (full size RAW ony) to DNG then import into Lightroom 5.5 -
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
How to convert image to array pixel values in java
I would like to know how to convert image into arrary of pixels in java ?
which API should i use ?
please give me link to a sample program !I find the most efficient way to just walk over the image and call getRGB(x,y) on every pixel, more so than Pixelgrabber. If someone knows a more efficient way, give me a beep.
-
'The account requires encryption which is not supported' after 3.1 upgrade
HELP!
Upgraded to 3.1 and got the following regarding my Exchange email from work:
POLICY REQUIREMENT
The account XXXX requires encryption which is not supported on this iPhone.
(Disable)
Help. What does this mean?
Do I need to go back to 3.0? Why would they change something to 3.1 to not make it work with my Exchange server.
Is there something I need to change or fix on my phone?... really dont want to go back to 3.0 (and don't even know how to)
Help pleaseGot the same thing.
My guess is there is an indication from the Enterprise Exchange server that data encryption is required, given that corporate suits are so enamored with being paranoid.
WIth 3.0, that indication was ignored, but in 3.1 it is apparently checked, and since the iPhone 3G does not support encryption (3GS does) it fails and the account is disabled.
I will talk to my IT dept. tomorrow, but I don't expect any sympathy. But, I don't really care as it's my phone and the company doesn't pay for it.
If you have a company-issued phone you probably should not update without your IT permission...
Maybe you are looking for
-
Digital Signature invalid when sign a PDF with instances
Hi, I created a XDP document with LiveCycle Designer ES2. This document contains: - Some required fields (text fields, data fields ecc...) - A Subform that user can add more instance pressing a button, contains some fields - A Digital Signature (With
-
I have Adobe Photoshop Elements9 on my PC Windows 7. Can I install Elements9 on Windows 8.1?
I have Adobe Photoshop Elements9 on my PC Windows 7. Can I install Elements9 on Windows 8.1?
-
How to pass APEX_UTIL.COUNT_CLICK parameters in the url
Hello, I have to count clicks on the List items: There is a Click Counting option in the definition of each List item, and you can add Click Count Category there. However, I also need to add Click Id parameter - p_id. This parameter (p_id) suppose to
-
Hello, I have moved into a house on a New Build estate on the edge of Carlisle which will eventually have approx 300 houses currently about 1/3 complete. Carlisle is an Infinity area but since moving in I have found that the Cabinet for the estate (n
-
The problem is with my iphone 4s. Even when i am on a phone conversation, it will continue to read incoming emails or texts. it is very frustrating.