How to convert LV Vi's from LV 7.0 to higher versions or viceversa.I need the steps.

For example i have labview 7.0 and i wan to open in LV 8.0 or still higher..so how to convert my VIs to higher versions or vice versa..I need the steps to convert.

Hello,
If you want to convert a vi written in LV 7.0 to a higher version (say 8.5) open the vi written in 7.0 with 8.5 and then save the same. (once you save it to 8.5, you can not open it with 7.0 since 8.5 is higher than 7.0. So male sure to back up your 7.0 version files)
Now to convert a vi from 8.5 to 7.0 (for example) it gets a litle complicated becase you have load the vi in LV8.5 and then select the option File-->Save for Previous version and select the appropriate option (like 8.2, 8.0 or any other that gets populated in the drop down menu).
Now say that you have selected the option 8.0, Again the vi saved in 8.0 and follow the same procedure to save it to 7.0 version of labVIEW.
The reason i said it gets complicated becasue you must have installed all the version of labVIEW (in the above case its LV 8.0) for a sucessful downgrade.
Hope this helps you out
Guru
Regards
Guru (CLA)

Similar Messages

How can i restore my documents from icloud on my iphone if i have already gone through the setup process??

How can i restore my documents from icloud on my iphone if i have already gone through the setup process??

Back to the beginning...
What do you mean by "documents"? Word or Pages files, spreadsheet files?
Also, on your device, in Settings>iCloud, you have to have an on/off setting for Docments&Data. If not what kinds of entries do you have on that screen?

How do I transfer my songs from my old computer to my laptop? They are both the same iTunes account

How do I transfer my songs from my old computer to my laptop? They are both the same iTunes account.

These are two possible approaches that should work to move an existing iTunes library to a new computer.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase are reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Should you be in the unfortunate position where computer has died with no backup then see Recover your iTunes library from your iPod or iOS device.
tt2

HT1926 I am trying to install iTunes on a windows 7/64 OS. The 32 bit version said that I need the 64bit version. the 64 bit version says that it is not a valid 32 bit installation. How can I fix this??

I am trying to install iTunes on a windows 7/64 OS. the 32 bit version said that I needed the 64 bit version. The 64 bit version syas that it is not a valid Win32 application. How do I get around this problem??

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How to convert chinese letlers received from a device to understandable information?

Hello,
I would like to read from a sound level meter, I'm using VISA functions, but when I run the VI at first the information received is in chinese and I didn't find how to convert it so as to be able to read an understandable data.
What can I do to read properly the data sent by the sound level meter?
Here is a photo of the problem and the VI I conceived.
Thank you in advance for your help.
Pièces jointes :
communication série RS232 avec le sonomètre.vi ‏33 KB

Hello Yasmine,
Thank you for posting.
Can you post a photo of the issue. Have you tried to change the language of your instrument ?
Regards,
Isabelle G.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

How to convert Sequence file documentation from TXT or HTML to MS Word ?

Hello, I would like to modify a DocSupport.prj which in default generate only TXT or HTML to support MS Wors *.DOC. I have already change the dialog (add *.doc filter..), that was simple. But the major problem is how to convert the output from doc.c to some *.doc file. I found somewhere here Word9 ActiveX Instrument for CVI, but I don't understand, how the CVI gets informations about the steps etc. from *.seq file for another use. The original code in doc.c is quite hard to understand it quickly. Thanks for help.

Hi Pet007,
You should be able to just change the file it saves to's extension to .doc. You'll notice there is a define for txt, you could either change this to doc or if you still want to be able to use txt, create a new define and use this. If you do this you'll need to also add a define above (as you see it defines an integer for each different format type and uses those throughout the program as well). That should give you a good starting point for modifying this code. Unfortunately it is quite extensive to actually accomplish this, or else I could give a step by step guide, but it is rather long. But you should be able to get it working from this. The reason this should work is because Microsoft Word (.doc) files understand plain text just like .txt files. However, if you want to add formatting (fonts, bold text, etc) you would need to use the ActiveX Instrument for CVI which just access the ActiveX server from Microsoft. For more information about ActiveX in CVI visit the following link.
Using LabWindows/CVI as an ActiveX Automation Controller to Control Automation ServersAlso, this link gives an example of using Excel with CVI through ActiveX, which may give you some useful information about doing this type of thing.
Embed Excel ActiveX Documents on a CVI PanelFor more information on using Word's ActiveX Server, check out the following Microsoft Portal.
Word Developer Portal
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

How to convert a voltage output from a Rogowski coil to its original current waveform ?

I need to measure current using a Rogowski coil. The voltage output of the coil across a 1k load resistance is directly proportional to the "rate of change of current" flowing through the conductor passing through the center of this coil. So the output is actually :
y = M * di/dt ; where M is the mutual inductance of the coil.
I need the output waveform as i(t). This means an integration is required.
Can some one help me out with this ?
I am also told that in the frequency domain this integration means a -20dB/decade attenuation and a constant -90 degree phase shift. This is some thing I cannot work out with Labview since I am new to it. I tried a mathematical integratio
n. But this also does not work.
Could someone help me out with this ?
Regards
PC

To come up with the most straight forward approach, forget for a moment that you are using LV and think about how you would calculate the answer using paper and pencil.
You have an input value that (using the formula you gave) is related to the rate change for a parameter (in this case the current). Given that rate of change, how do you calculate the absolute value of the parameter at any given point in time? It's really just a math problem...
Once you have it worked out on paper, just do the same calculations in LV.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How do I copy and paste from one page or file to another page or file - on the same screen?

How do I copy and paste from one page or file to another - on the same screen?

Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

I would like to know how to insure that all track from a CD I rip into i-tunes all go into the same file regardless of the artist on the CD. I was recdently importing an All Time Low CD into i-Tunes for my daughter and because one track featured a guest a

i would like to be able to insure that when i import a CD into i-Tunes that all tracks from that CD go into a single file for that album in their proper order regardless of whether or not there is a featured artist on one or two tracks or whatever. i recentl;y imported an All Time Low CD into i-Tunes for my daughter and because one song featured a guest artist i-Tunes placed that song in a seperate folder and so when i synced my daughters i-Pod Touch that one track is not with the rest of the tracks form the album and has to be listened to seperately. The song is from the same album and should be where it belongs with the rest of that album so she can listen to the entire album with the tracks in the proper order. I am sure that this can be done i just don't know how.

Edit the Name of the problem song to Name [Feat. Guest]
Change the Artist of that song to All Time Low
marley2012 wrote:
... and i want to make sure that from now on all songs from any CD I import into i-tunes all go into the same album file if they are on that album originally. i do not want i-tunes seperating songs from my CD's for any reason. hopefully this is more clear.
What you want cannot be done. iTunes has its quirks, and the above is the kind of workaround needed to make the media display sensibly on any device. The article I pointed you to has others that you may find useful in future.
tt2

How do I get my music from Media center to my iphone. Itunes won't import the MC music library, and MC won't recognize and synch to the iphone so I can't load playlists from MC to my iphone. Itunes help doesn't work.

How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.

Hello and welcome to the support community
As you know, your iPhone 5 is not compatible with our iBook G4. To get your music in iTunes from your iBook to your iPhone you would need to migrate the music files to a newer intel based Mac. A Mac which has Mac OS X 10.6 or higher installed. Then sync your iPhone 5.

Hi, how can I stop my screen from freezing up.Its acts like a scratch card, I use the mouse cursor to rub away to find the password box?

HI,how can I stop my screen from freezing, It acts like a scratch card,I run over it with the mouse to scratch away at the grey screen to find the password box
underneath?

OS X: Login window partially appears, cursor movement redraws screen

How do I copy a document from pages into email (not pdf) and have color and format the same as the document created in pages?

How do I copy an entire document from pages into email (not pdf) and have color and format the same as the document created in pages?

Pages ’09 v4.3 and Pages v5.2.2 are entirely different document architectures. Consequently, copying and pasting a table from Pages ’09 circumvents the customary translation process that would occur if you opened that Pages ’09 document in Pages v5.
Make a backup copy of the Pages ’09 document that has the table in it, and then open this document in Pages v5.2.2. The table is translated into Pages v5 document format and displayed correctly. You can even select this Pages v5.2.2 table, and then copy/paste it into another Pages v5.2.2 document with accurate results.

How do you share some photos from an album in iphoto to facebook without bringing over all the pictures?

How do you share some from photos from an album in iphoto to facebook without bringing over all the pictures?

Select the photo(s) and click share and share to the face book album you want
LN

I need the Step by step "dummies" version of how to delete outdated sites from the navigation toolbar.

My 12 year old daughter would like to remove a few websites from our navigation tool bar and we can't figure out how to delete. All the questions answered on this site so far require a PHD in IT. Can someone please provide us a step by step version on how to remove a few simple sites? Thanks!

Hello Amy.
I think we need to clear things out a bit in terms to terminology: the navigation toolbar is the toolbar where, by default, you have the back/forth buttons, the location bar and so on. What you're probably talking about is the bookmarks toolbar, where, by default, some of your bookmarks (those that are stored there) appear. Rightclicking them and selecting ''Delete'' is probably all you need to do?

HOW DO I SYNC MY CONTACTS FROM MY IPHONE 4 TO MY NEW MACBOOK PRO? AFTER THE INITIAL SYNC!

I SAW SIMULAR QUESTIONS....BUT THE ANSWERS SAID TO PLACE ONE UNIQUE CONTACT THEN SYNC UP YOUR COMPUTER FOR THE FIRST TIME. WELL, I ALREADY PASSED THAT STEP. SO IS THERE A WAY TO MERGE THE CONTACTS IN RETROSPECT?

You need to be on the same apple id on both devices, and sync the contacts.
Or, save a back up on the iTunes from your iPhone 4, and then restore that back up on the iPhone 5C.

How to convert LV Vi's from LV 7.0 to higher versions or viceversa.​I need the steps.

Similar Messages

Maybe you are looking for

How to convert LV Vi's from LV 7.0 to higher versions or viceversa.I need the steps.