How to convert my animation to movieclip

hi all , i have created an animation (a motiontween) , i need use in my other project it must be a working movieclip.How to make this.
i need take him my library for that it must be one piece.
if you allow me i have one more question
i take a hammer and hit the wall , i want show an animation in this event , i think should use it
_level0.framename.movieclipname.gotoAndPlay(20);
_level0.framename.gotoAndStop(2);
play animation in frame 20
continue it in 2.frame
i did not try this , will that work ? (its after that i will convert my anm to mc )
Thx all.

To turn your timeline animation into a movieclip, select all of the frames that hold the content of your animation, right click and select Copy Frames. Then create a new movieclip symbol (Insert -> New Symbol -> MovieClip), select the first frame of that movieclip's timeline, right click it and choose Paste Frames. All of the frames and layers that you copied should populate the movieclip timeline.
As far as your second question is concerned, it is unclear what any of what you say involves, so your best bet is to try it to see if it weill work... in fact, any time you wonder if something will work you should try it.

Similar Messages

How to convert Fla or SWF file in to 70 mm theatricla movie.(cinema)

this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
Manoj

Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.

How to convert Fla or SWF file in to 70 MM movie(cinema)

this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
Manoj

Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.

How can I convert my animation into a working movie clip that can be used with a new scene?

Hello all,
First and foremost, I AM A TOTAL FLASH NOOB. I want to preface this and make it incredibly clear how new this all is to me. I LITERALLY started using flash this morning; that is precisely how new I am.
With that being said I am going to do my best to explain what I'd like to do.
I have created an animation of a spider moving its legs back and forth. I want to be able to combine all of the layers into 1 simple animation that can be imported into new flash scenes with the animation exactly how it stands. I have figured out how to convert the whole animation into a symbol AND I have figured out how to import the movie clip from the library. However, herein lies my problem. When I open a new flash scene and import my animation, I play it and it does nothing at all. It's just the static image of the spider I created with no movement.
I've spent the last couple hours trying to figure out (and doing my own research) what I have done or didn't do to get to this point. I'd be willing to bet I am just going about the entire process incorrectly and I'm simple overlooking a basic facet of the program.
Any insight to fix my ignorance is greatly appreciated.
(P.S. Hell, I don't even know if I am using the correct terminology so for all I know I am confusing every person who has taken the time to look at my question. If I am using incorrect terminology please correct me to avoid future hang ups. Thank you.)

Ned! This totally worked! Thank you! I knew there was a tiny piece of this whole thing that was preventing me from making everything work. Unfortunately as my luck would have it, although I have the movieclip working the spritesheet converter I'm using now no longer recognizes the movie clip. The converter says there are 7 frames in the animation, but doesn't display any working sprites. Just a blank sheet. Frustrating to say the least.
I'm just going to throw everything out on the table here:
This is the video tutorial i'm using to convert my animation into a spritesheet. I've done the steps exactly as directly up until the point I actually click "Begin Conversion." When begin conversion is selected, it shows the movieclip exists on the bottom left underneath "list of movieclips" but doesn't actually show any individual sprites.
Here's the simple sprite converter I am using.
The irony of this whole situation is that you have successfully helped me make a working movieclip (which was the important piece), but the converter no longer recognizes it. Whereas before, it would at least show the image on the 1 frame of animation it had.
If you wanted to to take a stab at it and see if you can successfully get it to work I'd be appreciative. If not, I totally understand as you have already been incredibly helpful and have my eternal gratitude for getting me this far. These animation programs can be quite overwhelming when they so vastly differ from one another. Don't even get me started no Anime' Studio Pro.

How to create the animation div dyanimcally using jquery+javascript

Hello,
after a week of researching and without getting the full result i decided to upload new discussion here and maybe some of you guys will help me.thanks in advance.
include the file:

    <meta http-equiv="X-UA-Compatible" content="IE=Edge">
    <script type="text/javascript" charset="utf-8" src="animate_edgePreload.js"></script>

html code:
<div id="Stage" class="EDGE-70798230"></div>    if i put it like this of course everthing works fine..i can put more with different id's and they will work fine...
my problem:
i dont know how many of this animation i will need...depends of what my server will give me in the response...so i need to create them dynamically...
i tried lots of things:
$("#newAnimation").append('<div id="Stage2" class="EDGE-70798230"></div>');    of course with this nothing happend...it even dont get the symbols under stage..and not any of the css...
$(".EDGE-70798230#Stage").clone().appendTo("#newAnimation");
$("#newAnimation").children('#Stage').prop('id','Stage2');   then mroe css changes and just then i can see the animation but it doesnt work..."play is not defind" when i try to run the animations..
i know there is some function that called createChildSymbol/createSymbolChild but none of them work for me...
i use jquery mobile..so to start the animation for example i do $.Edge.symbol.get($("#Stage")).play();
i tried to use the loadResources etc....doesnt work too..
anyone have some idea what i can do? it is possible?

joel pau thank you for all the support.
now i will explain the anwer if anyone else will be stuck with the same problem.
first of all in edge animate need to mark all the things that created and "convert to symbol"(mark all and right click).
second:
in the top of your html file you got the script to the edge_preLoad.js .....
so now in your js code:
lets say we use append to add new div to our code and now we got <div id="new"</div>.
$.Edge.getComposition("yourCompositionID").createSymbolChild("yourSymbolThatCreatedInStepO ne","#new");
like this you can get new animation of the same composition.
if you want to conroll the animation you just need to take the id of the new symbol your created using jquery or any way you like.
and example of control it:
$.Edge.symbol.get("#theNewID").play();

How to convert flash to html5 ?

HTML5 is here no way to avoid it. mainly if your building mobile applications but creating animation in html5 is just not that fun.I want to know how to convert flash to html5,with what can convert flash to html5 .
Any help will be appreciated.Thank you.

Hi
You can convert flash swf file to html5 using either Adobe Wallaby or Google swiffy
http://www.designscripting.com/2011/03/convert-flash-cs5-to-html5-download-wallaby/
http://www.designscripting.com/2011/06/google-swiffy-convert-flash-to-html5-similar-to-wal laby/
Still there are some limitations,
Some of the features unsupported by Wallaby
3D transforms
ActionScript 1,2
ActionScript 3
Blend Modes
Button – events
Compiled Clips
Components
Inverse Kinematics
Sound – Stream, Event
Video – Embedded/External

How to convert class file

Hi all, I am new in java card development.
This is my environment setting:
@echo off
set JC_HOME=C:\JavaCard\java_card_kit-2_2
set JAVA_HOME=C:\j2sdk14103
set PATH=.;%JC_HOME%\bin;%PATH%
I have created the Wallet applet according to 'Zhiqun Chen" text book and named it WalletApp.java.
I have compiled this file to a class file.
This is where is I saved my file
C:\JavaCard\java_card_kit-2_2\samples\src\com\sun\javacard\samples\WalletApp\WalletApp.java.
But I don't really understand how to convert the class file.
May I know what is this for?
-out EXP JCA CAP
-exportpath
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1
com.sun.javacard.samples.HelloWorld.HelloWorld
com.sun.javacard.samples.HelloWorld
0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
must save this in what file?
I tried to type in the command line below (and the result):
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sap
les\Wallet\Wallet.opt
error: file scr\com\sun\javacard\saples\Wallet\Wallet.opt could not be found
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
use file for all options and parameters to converter
Where options include:
-classdir <the root directory of the class hierarchy>
set the root directory where the Converter
will look for classes
-i support the 32-bit integer type
-exportpath <list of directories>
list the root directories where the Converter
will look for export files
-exportmap use the token mapping from the pre-defined export
file of the package being converted. The converter
will look for the export file in the exportpath
-applet <AID class_name>
set the applet AID and the class that defines the
install method for the applet
-d <the root directory for output>
-out [CAP] [EXP] [JCA]
tell the Converter to output the CAP file,
and/or the JCA file, and/or the export file
-V, -version print the Converter version string
-v, -verbose enable verbose output
-help print out this message
-nowarn instruct the Converter to not report warning messages
-mask indicate this package is for mask, so restrictions on
native methods are relaxed
-debug enable generation of debugging information
-nobanner suppress all standard output messages
-noverify turn off verification. Verification is default
*********************************************************May I know What is the correct command line to convert the class file and what must I do to before converting the class file?
I saw some article saying we must use JDK1.3, is it a must?
Your solution is highly appreciated.
Thank you!

Hi Ricardo,
I saved the file below as WalletApp.opt in the directory of scr\com\sun\javacard\samples\WalletApp
-out EXP JCA CAP
-exportpath c:\javacard\java_card_kit-2_2\api_export_files
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2:0x1 WalletApp.WalletApp
WalletApp 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2 1.0
But I still have the problem below:
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sam
ples\WalletApp\WalletApp.opt
error: file scr\com\sun\javacard\samples\WalletApp\WalletApp.opt could not be fo
und
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
May I know What's wrong with my command or file?
Where can I download JDK because what I can find is J2SDK.
Thank you!

How to convert string to 16 characters.

My external unique id is too long, more then 30 characters.
How to convert it to 30 characters using sql?

You should find another extranal system id in order to mantain uniqueness, but you could also use the name field (that supports 50 characters), but it deppends of which entity you are using.
Which is the entity? and...if the only way to insert data is by web services the you could use more than one field to verify uniqueness since you can query more than one field at the time.
Hope it helps
Kim.

How to convert Web app into a channel?

To whom it may concern,
Does anyone know how to convert a Web app into a channel inside the Portal server 6.0?
I developed the web app and tried to create a provider and a channel for it, but the Portal server did not recognize the WEB-INF folder and give me errors saying that it couldn't locate the class files.
I also have a problem with URL inside my jsp page (channel).
For example, I have two jsp pages:
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test1.jsp
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
and when I try to put a link from test1.jsp to test2.jsp using
... and make a channel based on test1.jsp. The channel will display the link as "http://mydomain/portal/test2.jsp" and result in "Error: page not found". I want the link to point to
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
To summarize my questions,
1) Where should the web app be located in the Portal server?
2) How to make a link inside one jsp page (channel) to point to another page inside the same folder?
Thank you in advance

Hello Karthik,
I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
Do you still have any other suggestions?
Thank you

I would like to convert an animated Gif to .mov, will Quicktime Pro 7 do this? Should I spend the money?

Hi everyone.
I'm looking to put a few animations onto keynote and I'm making my presentation on PowerPoint.
I need to convert an animated gif into a .mov file and was wondering whether Quicktime Pro 7 does this?
Thanks

I need to convert an animated gif into a .mov file and was wondering whether Quicktime Pro 7 does this?
Since it appears QTKirk has provided the best answer for your specific work flow issue as stated, I will answer your more general question...
Yes, QT 7 Pro can open an animated GIF file and save it as an MOV file. At this time the real question is whether or not the MOV file produced is suitable for your needs. Basically the MOV file can be then then be played—but it only plays one pass in the normal playback mode. You can, of course opt to loop the playback which, for a small files, plays much as the original GIF.
Unfortunately, the "Loop" setting is not saved when the MOV file is saved, so this option must be re-initialized each time the MOV file is opened. This would not be a problem if all you are doing is openening the file in the QT 7 player and letting it play in the looped mode all day as some sort of display but would likely be an unsatisfoactory solution for sending the MOV file to someone else. You could, of course, turn the MOV file into a QTL file with the loop option set to get around this problem.
While I would be hard pressed to say it would be a good investment just for the creation of GIF movie files, QT 7 Pro does offer a lot of other features that make it a bargain utility for many quick edit requirements if you use/need them.

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to convert data from a report in PDF which are specified on multiple lines ?

It often occurs that in a report one detail entry is folded onto two subsequent lines.
e.g.
No.
Container          Lt Ht Tp F/E     Dam          Weight Temp     Bi Im First Seal     No. Cell     Booking ref.
In Arr    id     A         Tml         PoL PD   PoD             C T L R F B
1       XXXU123456-7 20 ST I F                        24.000                                  SLX11            1    25A     CVA12345
How does the conversion to Excel is going to handle this ?
I need the second line of data in my excel sheet.
YES               9/10   14:15        BEANR   REFCT

Hello Jay,
Don't use SSIS to convert. Use SSIS to FTP the files out.
How you convert to PDF: the format is owned by Adobe so there might be royalties involved, but there are paid and free (OSS) libraries to doing so. Just search online.
Arthur
MyBlog
Twitter

Very Urgent--- How to Convert Non Valuated stk into Valuated

Dear GURU'S
Actually for a material A when i see the stock in MM03 in accounting tab i see less stock then when i see in MMBE
i.e in MMBE if i select Material A and Plant B(Which is depo in my case) i see stock as 39
but for same material MAterial A and Plant B ,if i see in MM03 --in accounting tab i m able to see less stock i.e only 1
============================================
Well the problem is In MM03 I cud see only valuated stk i.e qty as 1
And in MMBE for a partiocular material for a particular plant the stock was 39
i.e Here i am getting Valuated + Non valuated stock
i.e i am getting difference of 25
=====>>>
To get into the root cause
I have gone to MB5B where i can get all the transaction that has been done on this material with movement type also i got the intial stock ,Goods recpt ,Goods issu and total stock
No for a particular material
In MB5B it is showing
Stock on 01.01.2005    = 38
receipts total               = 238
Issues total                  =237
Stock as on 18.02.2008 = 39(which is equal to Stock in MMBE)
=============>This is for valuated +Non valuated stock
Where as if i want to see only valuated stock it was showing
receipts total      = 238
Issues total         =237
Stock as on 18.02.2008 =1 (which is equal to stock in acctg view in MM03)
====================>This is only for Valuated Stock
======================================
Now how to solve this :
The initial qty(38) which has been posted it was at the begining that is at the start of the project
And the people who have posted it ,it was non valuated
that is the reason it is showing difference in MM03 and MMBE
First thing
How can i see on which date this initial stock has been posted
Second Query
How to convert this non valuated stock into Valuated stock
So that the quantity in MMBE and MM03 gets matched
Willl award 10 Points if my problem gets solved
THANKZ IN ADVANCE
REgds
Shailesh

Dear friend
Actuallly i have checked the history of that particular Item in MB51
I have gone through all the documents created for this material
Now this material also exist in DEPO which is located at chennai and plant is at mumbai
So Initially in the year-2006(31-10-2006) whater documents are created i.e STOP has been created and delivery has been made (Mov type-601)
are non valuated stock ,means they have been posted without any valuation
But from year 2007(01.02.2007) the documents whiohc have been posted are valuated
i.e is the reason when i am executing transaction MRN9 to check the history of valuated stock
I cant see non valuated stock
Well now how to do the valuation of this stock which have been posted in year 2006 so that
In MMBE and MM03 there is no difference of stock
Plz hepl
regds
shailesh

How to convert a .jad file to .class file in JAVA Swings.

Hi all,
Sorry for the interruption.I am also facing the same problem.I am using DEJDecompiler.But my application is not J2ME But J2EE.( a Swing application).I opened .class file and made some changes but I dont know how to convert into a .class file again.
I tried saving .jad file to .java file.Then it is showing lot of errors in Eclipse Platform.I doubt if there are any errors in the .class file already,then how could the program would run.I put all the programs in the respective platforms only and then testing.It fails.
(2) one more question,is if I do not need to disturb any existing coding and need to create a seperate java file which will do my customisation,then what should I do.I could not get any interfaces in the program.
Please help me as the matter is most urgent.
Thanks in advance
With regds
Satheesh.K

I tried saving .jad file to .java file.Then it is
showing lot of errors in Eclipse Platform.I doubt if
there are any errors in the .class file already,then
how could the program would run.I put all the programs
in the respective platforms only and then testing.It
fails.So who's Java program/library are you trying to steal?
(2) one more question,is if I do not need to disturb
any existing coding and need to create a seperate java
file which will do my customisation,then what should I
do.I could not get any interfaces in the program.
Please help me as the matter is most urgent.Wow, you urgently need to steal someones program/library. The best person to give you advice urgently is the owner of the program/library you are trying to steal.
Thanks in advancePlease don't thank me because I'm not going to help you!
With regds
Satheesh.K

How to convert the javasource file(*.class) to execute file(*.exe)?

How to convert the javasource file(*.class) to execute file(*.exe)?
thank you!

Although i have seen a few programs (that are platform specific) that will embed a small jvm into an exe with your class file, it is generally excepted that you cannot create an executable file using java. The JAR executable file is probably the closest your going to get
Pete

How to convert my animation to movieclip

Similar Messages

Maybe you are looking for