How to convert my video's to apple format?

I have alot of videos that are in DIVX and AVi format that itunes and my ipod will not accept. So how the heck do I convert them into an ipod friendly format? Really getting on my nerves since I bought this ipod how much trouble ive had with music and video's....might consider getting a Sandisk with its drag and drop.
anyways can anyone plz explain how to do it in itunes so it doesnt make me return this new ipod.

Search for __Skuld Video iPod Converter__. It takes a little while to convert each video file, but that's to be expected. Completely free, no watermark, no hassle.

Similar Messages

How to convert a Video TS to a format I can copy to DVD

I have a DVD from a friend that he used Video TS format.
I was able to copy an image to a new DVD using Disk Utilites. It started to play the DVD but seconds later it said the DVD has a scratch or something else wrong. I then copied it using another DVD but again as I was test running, it errored out after a few seconds of running the video TS files.
I am not sure if there is a different way I can make an exact copy of this DVD.
It plays well when I insert it to my DVD Read Writer in my eMac. I can even run it straight from DVD Player, I can open the folder and runs fine.
But it stops and errors out only when doing an disk image in Disk Utility.
Anyone knows what I can do ?

Hi Jose
You will certainly get lots of advices on programs to use here but I will share
a more brute and in my opinion higher quality way.
Use Your miniDV Camera. Connect it to a stand-alone DVD-player and copy
to a new miniDV tape. Use this in iMovie or FCE/P.
This way gives highest quality to my knowledg BUT DON'T be tempted to set
Your Camera into LP-mode. This will result with:
- jittery and jumpy clips
- 12-bit sound and because of this severe audio sync problems.
alt. Use a 90 min tape instead of 60 if You need to. They exist at least from
SONY (premium).
Yours Bengt W

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

I converted my video to MP4 264 format. Now how do I get it on my Ipad2

I converted my video to MP4 264 format, how do I get it on my Ipad2

Open itunes > drag the the video you converted to "movie" category in the left navigation of the itunes > plug your ipad2 > if your ipad2 is configured as "manually manage music and video" > go to movie category in itunes > select the movie > drag it in your ipad2 device

How to convert mp4 videos (HD) for use on the new ipad in imovie without a mac.

Hi,
Please help. I have many videos taken with my sony cybershot camera (Mpv4 (HD)). I have the new ipad and have downloaded imovie. I have converted the videos so they can be viewed on the ipad but imovie will not recognize them. I have a Pc (not a Mac) and have watched many youtube tutorials on how to convert my videos for use on the new ipad and imovie but so far no success.

If you are on the PC there are a LOT of video converters you can use. One of them is Freemake: http://www.freemake.com/
It's free, no ads or banners, clean interface, simple to use, and you can convert to various formats with ease.

Converting a video to mpeg-2 format for a TV station. Format profile set to "main@main" required. How do I do that? Help!

I am converting a video to mpeg-2 format for a TV station and they require me to have a format profile set to "main@main." How do I do that? Help!

Main@main aka MP@ML (main profile @ main level) is the conformance point for most
cable and satellite TV systems.
The station should be able to supply you with specific specs but more than likely they are conforming to what DG deliverable specs also are for MPG-2. One of the big things is in the Xtras tab of the setting.
You must have the YUV 4:2:2 box checked. The caveat being you will not be able to check the files playback on your system. To my knowledge QT/Mac has yet to come up with a way to playback these files(you can play them but there will be no picture).

Does anyone know how to convert 3GPP videos to the iPhone 4S? I have favorite videos I would like to transfer to my new phone. Any help would be appreciated. Thank you.

Does anyone know how to convert 3GPP videos to the iPhone 4S? I can sync my photos from my computer but not my videos. Any help would be appreciated. Thank you.

Hello,
This link may be useful to you:
http://www.iorgsoft.com/iphone-4s/convert-3gp-to-iphone-4s-on-mac.html

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank you

So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

How to convert internal table data to PDF format

HI,
I have an internal table data having one field with 255 chars. length.I want to send that intenal table data as attachemnt with external mail. i am thinking of converting that data into PDF format and use the FM to send the mail. How to convert internal table data to PDF format.
Kishore

In which format is your data in the internal table currently. Is it returned by a smartform/script or its just data fetched from some database table into an internal table. Since its obvious that the data should appear in the PDF with some Layout, you should be using smartform to format the data properly. See the Link
Smartform to PDF to EMAIL
This shows convertion of smartform to pdf and send it through email
Regards,
Abhishek

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video,

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video, it is just a white screen, but the sound can be heard. Can anyone help??????

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
See: iPod plays video but not audio of some exported files.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

How to convert MPEG videos for use on iMovie?

I filmed my drama assignment with my friend on her video camera, she gave me all the files on a USB and when I got home to start editing on iMovie, it says: iMovie cannot open files in the “MPEG movie” format.

I forgot to mention in a strange way there is not a straight standard format used by cameras as I discover In iMove and Final Cut Express. Mpeg is pretty standard but can be different. For example AVCHD or AVCHD Lite, Motion Jpeg on Panasonic. Each Camera uses similar names but the compression format maybe different and not compatible with iMovie. This why I like Toast, it converts almost anything to a useable format. But if your starting out the Camera Brand and Model is the key to finding compatibility with iMove. Since I have not used iMove in a while and don't know the new version go to the forum with Camera etc. and ask about compatibility. But Toast with some tries will most likely give you what need. This can be frustrating but you'll get there, it may take a little time. Also open the folder with files to see exactly what you've got. You really need to know exactly what you've got. I hope QuickTime work out for you

How to convert binary file to a particular format?

Hi,
I am having a requirement. I have in database various kinds of files stored as binary format. Its a sybase database. Now the files can be .pdf, or .doc also. But they are stored in binary format.
I need to read the file from database.
Now I can use jdbc to read the particular column value which contains the file in binary format.
But tricky part is how to convert the binary file entry in a proper respective file format? So I have another column which basically has the value to tell the type of file. So I have ".doc" or ".pdf" as each entry of file...
So please help me how can we do this using Java?
THanks

Hi,
I am having a requirement. I have in database various
kinds of files stored as binary format. Its a sybase
database. Now the files can be .pdf, or .doc also.
But they are stored in binary format.
I need to read the file from database.
Now I can use jdbc to read the particular column
value which contains the file in binary format.
But tricky part is how to convert the binary file
entry in a proper respective file format? So I have
another column which basically has the value to tell
the type of file. So I have ".doc" or ".pdf" as each
entry of file...
So please help me how can we do this using Java?
THanks

How to convert message in XI into PDF format

Hi,
I am trying out a scenario where i am getting an idoc from SAP into XI and now in XI i need to convert the data into pdf format and send that pdf in a mail using mail adapter.
Can any body help me out how to convert a message in XI to pdf format.
Thanks in Advance!!
Regards,
Sudheer

Hi Sudheer
follow these links
http://www.erpgenie.com/sap/sapedi/Conversion%20of%20IDOCs%20to%20XML%20format.pdf
Here is the complete code for you;
It Converts spool request into PDF document and emails it.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Smartform as attachment in mail. - 46k
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/convert-smartforms-form-in-pdf-998715 - 87k
SMART form to PDF
https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertSmartformtoPDFformat
smartform to MAIL
https://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment
Regards
Sandeep Sharma
PS: if helpful kindly reward points

How to convert cXML dtd files into xsd format and use them into BPEL application

Hi,
In my BPEL application I have to use cXML dtd files by converting them into xsd format.
I have used 'Microsoft Visual Studio' for converting cXML.dtd file into xsd format, for this 1 dtd file I am getting three xsd files (cXML.xsd, cXML1.xsd and cXML2.xsd).
Please check this once and let me know
1. why I am getting three xsd files for one dtd file,
2. how can I use cXML.xsd file in my application, do I ll have to use all the three files in my BPEL app and
3. what should I include in main xsd file (cXML.xsd) to import other two xsd files.
kindly check this once and let me know your suggestions .
Thanks

Hi,
While downloading the cXML dtd there will be example xml files. Using this xml's we can generate xsd.
Regards,
KANN.

How to convert electronic account statement to MultiCash format?

Hi,
Please provide me procedure for following conversions:
(1)How to convert electronic account(bank) statement(of Saudi Arabia country) to MultiCash format?.
(2)How to convert electronic account(bank) statement from MT940 format to MultiCash format?.
Thanks & Regards,
Seshagiri.

Hi,
Please provide me procedure for following conversions:
(1)How to convert electronic account(bank) statement(of Saudi Arabia country) to MultiCash format?.
(2)How to convert electronic account(bank) statement from MT940 format to MultiCash format?.
Thanks & Regards,
Seshagiri.

How to convert my video's to apple format?

Similar Messages

Maybe you are looking for