How to convert number field into time

Hi
I have made a form for storing of private dialed calls from different extensions. To store call duration i have assigned a number field which is storing following type of data
1.34
1.19
37.29
1.47
In above mentioned data decimals are seconds and left side is minutes.
Now the requirement is that if second is > 30 then 1 minute should be added in minutes else 30 seconds should appear instead of original seconds.
Please Help!

>
To store call duration i have assigned a number field which is storing following type of data
In above mentioned data decimals are seconds and left side is minutes.
>
Please provide info about the form in which you RECEIVE the data. Do you receive the data in MM.SS format like you say you are storing it?
If not, why are you storing it this way?
Unless you have some reason to STORE the data differently just store it the way you got it. That way you won't lose any precision and you can manipulate it any way you need to for display purposes.
If you receive START_TIME and END_TIME then store both of those. Don't calculate and store duration; you will lose END_TIME and if you later need to calculate duration to a different precision you won't be able to.
Where is the data being stored? Oracle?
Write a simple function to convert a duration to minutes and seconds using the '>30' rule you have. Then if the rule changes you can write a new function or modify the existing one and the data itself doesn't have to change.

Similar Messages

How to convert number pairs into .grd file(w/o typing them all in)

I want to be able to take a set of numbers (like coords from some shape), and use them to create a gradient file.
Example, I start w/file of:
x=0 , y=0
x=1 , y=4
x=2 , y=10
x=3 , y=18
x=4 , y=22
...50 lines elided...
x=75 , y=97
x=80 , y=98
x=84 , y=99
x=94 , y=100
where I would use the x as the x coord(duh), and 'y' as the 'height' of transparency
(or a brightness value that I'd combine with some desired color value to get an RGB value).
But in this simple case,
assume a a simple foregnd->backgrnd color (or any 2 color gradient @ 0 & 100), with only the transparency value needing
all the numbers ...)
(would be nice if I could just input a forumula...but.....) barring that.. trying to figure out the .GRD
file format is proving to be a bit of a pain.
I notice lots of map-marker points like FE' (ala SVG FE function, ) values, references to doubles, etc...
but spending a bunch of time figuring out the file format seems like such a bother if it's already been done...
any scripts or tools to allow such conversions or am I stuck writing my own perl script...
(breaking it down w/vim wasn't too difficult subbing in <0> or <0000> for quads, etc...
going from that could see where numbers were wanted and convert those
to hex, <xx>; At some point, given the 'FE' function I suspect I'll have to look up how floating point
is stored ... sigh.
See what I mean by a pain to write a script?)
Ideas/pointers?

   Odd, there was a response here by me, w/no content.   I don't remember posting 'nothing', rather than just delete it, I thought I'd try to remember what I wrote at the time and see if it stays in the system this time.
Chris Cox wrote:
The gradient preset files are a sort of key/value pair system, but not really like XML (and are a heck of a lot faster to read and write than XML).
The file format is documented in the SDK, and has been for many years.
It's just a complex enough format that even most developers don't want to mess with it.
   Yes-- could see the key value pairs in the work I did. that's were I found reference to a key with "FE"" in it and thought it was related to the SVG function of the same name - as it is the gradient function in SVG, but you said above, that the FE key word in the binaries files had nothing to do with the gradient function that is in SVG by the same name (somehow I don't think you read what I was writing but sorta skimmed it. My writing tends to alot more information in it than it appears (coincidentally, my posts tend to be longer than the average post), so it may not be that it contains more information than it _appears_, just more than the average post...and, as some may believe (not saying on the forum, but have encountered this on others)
   What is often true in writing about any topic is that, it is increasingly difficult to make my writing more concise while retaining precision -- especially if you are trying to be *clear*. Too often, I find, that when I toss off quick notes, I'll lots of dumb looks <*huh?*? or responses (not responding to what I said) and I'll spend as much (usually more) clarifying or correcting misunderstandings, OR verifying that they were responding to or answering was to something I actually 'said', rather than what it appeared (to me) that they were responding to.
   As for the bit about developers touching old code...that's common in almost every project...no one wants to touch something that is currently working, as even though they may be adding improvements or fixing a problem, it is certain they will change the code in a way that it doesn't behave precise as it did before (by definition, else why make changes?), and as a result, they may get complaints from some people who were using that code in some completely unexpected way which now breaks in the new code (even though the documented behavior may be unchanged).
   This is a major problem, since I have NEVER scene documentation that explains all the inter-relations and behaviors of a program, yet often, it is *expected* that people will use those undocumented interrelations to do anything other than the most basic functions. Note -- by undocumented, I also include things that may be discerned via induction on the various pieces but are not explicitly spelled out (thus open to 'reinterpretation' at some later point...).
   It seems, almost inherently, that they thorough documentation of code would be NOT just the code, but also design documents and notes -- which would not happen in almost any project (maybe a government funded security program), but would also be impractical as a an easy to use reference (I.e. that would need to be written as well). As it is, some programs simply come with installation instructions and/or installation support.
   Anyway, hopefully, this answer will get posted and stay (don't know what happened to previous)...(failure in submission or bit-rot).
Astara

How to convert table content into html format?

Hi,
Experts,
How to convert internal data into HTML format is there any function module or piece of code to download content into HTML.
Thank u,
Shabeer Ahmed.

Then use this code....
REPORT ytest_table_html1.
*        D A T A   D E C L A R A T I O N
*-HTML Table
DATA:
t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
                                       " Html Table
*- Declare Internal table and Fieldcatalog
it_flight TYPE STANDARD TABLE OF sflight WITH HEADER LINE,
                                       " Flights Details
it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
                                       " Fieldcatalog
*-Variables
DATA:
v_lines TYPE i,
v_field(40).
*-Fieldsymbols
FIELD-SYMBOLS: <fs> TYPE ANY.
*        S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
SELECT *
    FROM sflight
    INTO TABLE it_flight
    UP TO 20 ROWS.
*        E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*-Fill the Column headings and Properties
* Field catalog is used to populate the Headings and Values of
* The table cells dynamically
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'SFLIGHT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2.
DELETE it_fcat WHERE fieldname = 'MANDT'.
t_html-line = '<html>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<td><h1>Flights Details</h1></td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<table border = "1">'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate HTML columns from Filedcatalog
LOOP AT it_fcat.
    CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
        it_fcat-scrtext_l
        '</th>' INTO t_html-line.
    APPEND t_html.
    CLEAR t_html.
ENDLOOP.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
DESCRIBE TABLE it_fcat LINES v_lines.
*-Populate HTML table from Internal table data
LOOP AT it_flight.
    t_html-line = '<tr>'.
    APPEND t_html.
    CLEAR t_html.
*-Populate entire row of HTML table Dynamically
*-With the Help of Fieldcatalog.
    DO v_lines TIMES.
      READ TABLE it_fcat INDEX sy-index.
      CONCATENATE 'IT_FLIGHT-' it_fcat-fieldname INTO v_field.
      ASSIGN (v_field) TO <fs>.
      t_html-line = '<td>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = <fs>.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '</td>'.
      APPEND t_html.
      CLEAR t_html.
      CLEAR v_field.
      UNASSIGN <fs>.
    ENDDO.
    t_html-line = '</tr>'.
    APPEND t_html.
    CLEAR t_html.
ENDLOOP.
t_html-line = '</table>'.
APPEND t_html.
CLEAR t_html.
*-Download the HTML into frontend
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'C:\Flights.htm'
    TABLES
      data_tab                = t_html
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-Display the HTML file
CALL METHOD cl_gui_frontend_services=>execute
    EXPORTING
      document               = 'C:\Flights.htm'
      operation              = 'OPEN'
    EXCEPTIONS
      cntl_error             = 1
      error_no_gui           = 2
      bad_parameter          = 3
      file_not_found         = 4
      path_not_found         = 5
      file_extension_unknown = 6
      error_execute_failed   = 7
      synchronous_failed     = 8
      not_supported_by_gui   = 9
      OTHERS                 = 10.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
none of the above function modules r obsolete...

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to convert DataServices.Result into an Arraylist or ArrayCollection?

I want to use an ArrayCollection or an ArrayList as a data provider
for a dataGrid, and then later in a Graph.
The problem is that the starting point is the FLEX Builder 4 created "datasource.lastResult" value Objects.
I don't know how to access anything but the Column names.
The fields returned are:
gmtdate,hostname,CPUBusy
I want to show CPU busy for "N" number of hosts.
So I need to change my result from the SQL query in Action Script into:
gmtdate, hostname1_CPUbusy, hostname2_CPUbusy, hostnameN_CPUbusy
Are there any samples of how to convert the .lastResult into an ArrayList?
The result set is Object based and I can't figure out how to read it.
Thanks,
David

I wish I could change it, but Oracle SQL does not allow for an unknown number of hosts.
Nor does this version of Oracle have the new pivot function.
David

How to convert Date format into day in ssrs reports?

Hi
How to convert date format into day?
10/01/2010 as like Monday like that?

=weekdayname(datepart("w",Fields!mydate.Value))
-Vaibhav Chaudhari

How to convert a optionset into multi selection picklist in crm 2011 using javasacript??

hi,
where user want to select not only one but multiple value
from a pick list. I tried examples but it shows some errors.
How to do it??

Hey I meet a problème on my development see my result :
link : https://social.microsoft.com/Forums/getfile/652331
a multiple select list on my crm 2013 I do this process on this forum :
link : https://social.microsoft.com/Forums/en-US/2db47a59-165d-40c9-b995-6b3262b949eb/how-to-convert-a-optionset-into-multi-selection-picklist-in-crm-2011-using-javasacript?forum=crmdevelopment
my development :
// var_sc_optionset >> Provide schema-name for Option Set field
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// OSV >> Provide text field object which will store the multi selected values for Option Set
//Method to convert an optionset to multi select Option Set
function ConvertToMultiSelect(var_sc_optionset, var_sc_optionsetvalue, OS, OSV)
if( OS != null && OSV != null )
OS.style.display = "none";
Xrm.Page.getControl(var_sc_optionsetvalue).setVisible(false);
// Create a DIV container
// var addDiv = document.createElement("<div style='overflow-y:auto; color:#000000; height:160px; border:1px #6699cc solid; background-color:#ffffff;' />");
var addDiv = document.createElement("div");
addDiv.style.overflowY = "auto";
addDiv.style.height = "160px";
addDiv.style.border = "1px #6699cc solid";
addDiv.style.background = "#ffffff";
addDiv.style.color = "#000000";
OS.parentNode.appendChild(addDiv);
// Initialise checkbox controls
for( var i = 1; i < OS.options.length; i++ )
var pOption = OS.options[i];
if( !IsChecked( pOption.text , OS, OSV) ){
// var addInput = document.createElement("<input type='checkbox' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("style","border:none; width:25px; align:left;");
else {
// var addInput = document.createElement("<input type='checkbox' checked='checked' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("checked","checked");
addInput.setAttribute("style","border:none; width:25px; align:left;");
// var addLabel = document.createElement( "<label />");
var addLabel = document.createElement( "label");
addLabel.innerText = pOption.text;
// var addBr = document.createElement( "<br />"); //it's a 'br' flag
var addBr = document.createElement( "br"); //it's a 'br' flag
OS.nextSibling.appendChild(addInput);
OS.nextSibling.appendChild(addLabel);
OS.nextSibling.appendChild(addBr);
///////Supported functions
// Check if it is selected
function IsChecked( pText , OS, OSV)
if(OSV.value != "")
var OSVT = OSV.value.split(";");
for( var i = 0; i < OSVT.length; i++ )
if( OSVT[i] == pText )
return true;
return false;
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// Save the selected text, this field can also be used in Advanced Find
function OnSave(OS, var_sc_optionsetvalue)
var getInput = OS.nextSibling.getElementsByTagName("input");
var result = '';
for( var i = 0; i < getInput.length; i++ )
if( getInput[i].checked)
result += getInput[i].nextSibling.innerText + ";";
//save value
control = Xrm.Page.getControl(var_sc_optionsetvalue);
attribute = control.getAttribute();
attribute.setValue(result);
I have to do 2 field one is option list field and the second is textfield,
option list field : new_books
textfiled : new_picklistvalue
my js is on onload event see :
link : https://social.microsoft.com/Forums/getfile/652333
thanks you for you'r help

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie - simple answers please - Thanks in advance.

@Pipeline2007 - which version of Microsoft Office have you got? Older versions of Acrobat aren't compatible with the latest versions of Office, see this link for info:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

How to convert jpeg files into word

How to convert jpeg files into Word

Hi Eugene,
I don't think you can convert an image to a Word document, but you could place the JPEG into a Word document using the Insert > Object command in Word.
For other questions relating to Word, you will probably have more luck getting an answer if you post on the Microsoft forums (we can help if you're using Acrobat, or another Adobe product, but you'll find the Word experts on the Microsoft forums.)
Best,
Sara

How to convert Doc file into image

hello frnds
Can any body guide me how to convert doc file into image and show into swf loader.
actually i have to convert doc files into swf files in runtime so that i have to use this flow.
is it possible to convert doc file into byte array and than convert into image.
Thanks And Regards
Vineet Osho

You can convert any DisplayObject to byeArray using this function ImageSnapshot.captureBitmapData().getPixels()

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

How to convert system Date into DD-MMM-YYYY Format

hi friends,
please help me How to convert system Date into DD-MMM-YYYY Format.
Regards
Yogesh

HI..
data: w_dt(11) type c,
         w_month(2),
         w_mon(3).
w_month = p_date+4(2). **p_date = given date**
case w_month.
when '01'.
w_mon = 'Jan'.
when '02'.
w_mon = 'Feb'.
when '03'.
w_mon = 'Mar'.
when '04'.
w_mon = 'Apr'.
when '05'.
w_mon = 'May'.
when '06'.
w_mon = 'Jun'.
when '07'.
w_mon = 'Jul'.
when '08'.
w_mon = 'Aug'.
when '09'.
w_mon = 'Sep'.
when '10'.
w_mon = 'Oct'.
when '11'.
w_mon = 'Nov'.
when '12'.
w_mon = 'Dec'.
endcase.
Now...
concatenate p_date6(2) '-' w_mon '-'   p_date0(4) into w_dt.
write w_dt.

How to convert Property files into Java Objects.. help needed asap....

Hi..
I am currently working on Internationalization. I have created property files for the textual content and using PropertyResourceBundles. Now I want to use ListResourceBundles. So what I want to know is..
How to convert Property files into Java Objects.. I think Orielly(in their book on Internationalization) has given an utitlity for doing this. But I did not get a chance to look into that. If anyone has come across this same issue, can you please help me and send the code sample on how to do this..
TIA,
CK

Hi Mlk...
Thanks for all your help and suggestions. I am currently working on a Utility Class that has to convert a properties file into an Object[][].
This will be used in ListResourceBundle.
wtfamidoing<i>[0] = currentKey ;
wtfamidoing<i>[1] = currentValue ;I am getting a compilation error at these lines..(Syntax error)
If you can help me.. I really appreciate that..
TIA,
CK

How to convert HL7 file into an XML

Hi All,
I am new to HL7,can any one tell how to convert HL7 file into an XML.Give sample demo or related links.
My sample HL7 file is as follows how can I convert.
FHS|^~\&||Tax ID123^Lab Name123^L|||201110191435||HL7.txt||1234567|123||
PID|seqno|123||john^chambers^^Dr^Dr|2456 california ave^San jose^CA^85254|19601212|M
FHS|^~\&||Tax ID123^Lab Name123^L|||File Creaqted Date|File Security|FileName||File HeaderComment||Facility|FileCreatedDateTime|File Security|File Name|File Header Comment|FileControlId|Reference File Control ID|
PID|seqno|patientId||LastName^FirstName^MiddleName^Title^Degree|Street^City^State^zip|patientDOB|gender
<Report>
<FileHeader>
<FileSendingApplication> </FileSendingApplication>
<TaxID>Tax ID123</TaxID>
<LabName>Lab Name123</LabName>
<FileSendngFacilityType>L</FileSendngFacilityType>
<FileReceivingApplication></FileReceivingApplication>
<FileReceivingFacility></FileReceivingFacility>
<FileCreatedDateTime>201110191435</FileCreatedDateTime>
<FileSecurity></FileSecurity>
<FileName>HL7.txt</FileName>
<FileHeaderComment></FileHeaderComment>
<FileControlId>1234567</FileControlId>
<ReferenceFileControlID></ReferenceFileControlID>
<FileHeader>
<Patient>
<seqno> </seqno>
<patientId>Tax ID123</patientId>
<LastName>Lab Name123</LastName>
<FirstName>L</FirstName>
<MiddleName></MiddleName>
<Title> </Title>
<Degree></Degree>
<Street></Street>
<City></City>
<State>HL7.txt</State>
<Zip></Zip>
<patientDOB>1234567</patientDOB>
<gender></gender>
<Patient>
</Report>
Thanks
Mani

Hi Prabu,
With input as in single line I'm able to get the the output but with the multiple lines of input,error was occured.Any suggestions.
Error while translating. Translation exception. Error occured while translating content from file C:\temp\sampleHL7.txt Please make sure that the file content conforms to the schema. Make necessary changes to the file content or the schema.
The payload details for this rejected message can be retrieved. Show payload...
Thanks
Mani

HT204382 How to convert VOB files into MP4 ? Tks

Hi, anyone knows how to convert VOB files into MP4 ones ?
Tks

http://forums.macrumors.com/showthread.php?t=812985
The procedure is dated and I will assume that the DVD is not copy-protected since discussion of such things is verboten.

How to convert number field into time

Similar Messages

Maybe you are looking for