How to convert RAW files that saved in UCCX server to wav file?

Hi all,
How we can covert the RAW files that are saved in UCCX server to wav file by using command prompt in UCCX servers. Or is there some other way? So that we should be able to hear the sound of these files.
C:\Program Files\Cisco\Desktop_Audio
Regards
Ali Raza

Hi,
I use Switch File Audio Convertor from NCH Software to do this.
It is a commercial product but there is a time limited evaluation and if you decide to keep it it is only $30.
http://www.nch.com.au/switch/index.html
It is great for converting audio files to the correct format for music on hold as well.

Similar Messages

HOW TO CONVERT RAW FILES TO JPEG RGB 8 BIT in iphoto

Can someone please tell me how to convert RAW files to jpeg RGB 8 bit in iphoto on an iMac?

How are you trying to "export to Mypics"? The only way to get a Raw out of iPhoto is to export with the Kind set to Original.
Regards
TD

How to convert raw files from new fujifilm x-t1 ?

how to convert raw files from new fujifilm x-t1 ?

The work around of converting the CR2 to dng either with the dng converter or ACR 6.7 will allow working in LR and CS5 but not with the latest raw conversion engine from Adobe i.e PV 2012.
Remember to keep a copy of the CR2 files if you wish to utilize the Canon software.

HT3275 How do I find/restore files from items in secure home folder? How do I find/restore files that crashed when in finder of secure (File Vault) home folder?

How do I find/restore files from items in secure (File Vault) home folder? How do I find/restore files that crashed when in finder of secure (File Vault) home folder? When I go into Time Machine, I see earlier dates but can't see files in my User File. I have File Vault turned on and see my home folder as a sparsebundle. Do I neede to restore this in order to see files in my home folder. When I click on it to restore it gives me an estimated time of over 2 hours. Also tried to restore an Excel file I was working on when computer hung, so lost it without saving or naming it. Does it exist anyplace and can I restore it?

Thanks. I had pretty much figured out from other posts that I had better turn off File Vault for my home folder and use a disk utility sparse bundel for little information I wanted to secure. The information about File Vault 2 in Lion was new and useful though.

Sql loader issue(How to specify a file that exists on remote server)

In sqlldr infile parameter I'd like to give a data file that exists on remote server.How can I specify???Please help me in the syntax.
Any help would be greatly appreciated.
Edited by: 792353 on Sep 24, 2010 7:22 AM

sqlldr can accept any path that is VALID and it can be any type of share as long as the OS supports the share.
so INFILE can be anything you want as sqlldr will simply attempt to access it via the OS.
if you are on a linux box going to another linux box with an NSF mount point on the box running sqlldr simply reference:
INFILE '/mountpoint/fname'
Now I have never tried a UNC path before but I would guess that if you are on a windows box, going to another winddows box and the box running sqlldr was logged in with the right permissions it would simply be:
INFILE '\\server\directory\file'
I doubt that it will accept a URL as in:
INFILE '//servername.com/directory/file'
I don't think that sqlldr does anonymous ftp or htp file transfer protocol, but I could be wrong.
NOTE: I have found that it is best to ALWAYS surround your INFILE parameter with single quotes.

How do I send a file that is 2 mb via adobe send file now. I have the student version of cs 6

How do I send a file that is 2 mb via adobe send file now. I have the student version of cs 6. Does this cost money, or can I send a certain size for free. I just want to send a file so I can access it on my ipad. It's a PDF that is too large to email.

Adobe Send can certainly do that.
Or you can do it manually:
upload the file to Acrobat.com
check the file on the Acrobat.com site and click Send
use Create Anonymous Link and click the Create Link button
copy the created download link and send it by email

How many files that JAR can bundle into a single file?

How many files that JAR can bundle into a single file?

The are no limitations inherent in the ZIP file format (jar files are basically just zip files).
The only limitations I can think of are;
available disk space
maximum file size (for some filesystems)

How do I get Logic to stop looking for a specific .wav file?

I recently imported a project I started in GarageBand into Logic Pro. Once in Logic, I edited and added to the project then saved it as a Logic project file. I deleted the original project from GarageBand. Now, when I open the Logic file, Logic is still looking for .wav files that were used in the original GarageBand file. None of these files are actually needed in my project. Is there a way that I can get Logic to stop looking for these .wav files?
Thanks for any help!

Do a cleanup.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=7%26sec tion=9%26tasks=true

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them. Any ideas?

As I said - look whether your original file is damaged or not. If not, I wouldn't change it and find out what in your system makes it sound like it's clipping.
Good sound file, with volume maxed out. No need to change anything.
The same song clipped - no chance to repair.

How to convert string to an integer in SQL Server 2008

Hi All,
How to convert string to an integer in sql server,
Input : string str="1,2,3,5"
Output would be : 1,2,3,5
Thanks in advance.
Regards,
Sunil

No, you cannot convert to INT and get 1,2,3 BUT you can get
1
2
3
Is it ok?
CREATE FUNCTION [dbo].[SplitString]
@str VARCHAR(MAX)
RETURNS @ret TABLE (token VARCHAR(MAX))
AS
BEGIN
DECLARE @x XML
SET @x = '<t>' + REPLACE(@str, ',', '</t><t>') + '</t>'
INSERT INTO @ret
SELECT x.i.value('.', 'VARCHAR(MAX)') AS token
FROM @x.nodes('//t') x(i)
RETURN
END
----Usage
SELECT * FROM SplitString ('1,2,3')
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Hi, I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files). Any ideas?

Hi,
I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files).
Any ideas?

No attachment exists.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to convert RAW files to JPEG?

I have a bunch of raw files and I am not sure how to convert them to JPEG. I sure would appreciate some help with this. Thank you

As you are posting on the Canon forum, I will assume you are using a Canon camera. Your camera came with the software you need. It's called Digital Photo Professional. It will also have the user manual for the software.

How to convert raw data to wav files??

Hi AnyOne,
Can anyone know how to do convert raw data in hex format into wav file format??
Please show some guideline.
Thank You.

Hi Craig,
Thanks for the reply.
I do follow according the the wav creation standard and save it as wav file. However, i still fail to read back the wav file.
I using LV8.2. Attach with my testvi and data. Please guide if i make any mistake in my testvi
Thx and Regards,
Simon76
Attachments:
data.txt ‏7 KB
testvi.JPG ‏39 KB
header.txt ‏1 KB

How to convert raw to number in oracle 8

Does anyone know how to convert a raw data to number format ???
If i do: select dump(50,16) from dual, it will return bytes c1 33.
With this bytes in a raw variable, how can i convert it to a number variable in Oracle 8.
PS: Oracle 8 doesn't have utl_raw.cast_to_number function...
Thanx.

Thanx for help... But...
This examples are very usefull, but only converts a value in HEX to number.
In my case, i need a routine that convert the bytes of value 50 (i.e. 2 bytes -> C1 33) into a number variable. If i only use hex to number, will return wrong value. I need to convert this bytes (C1 33) into original number, i mean, value 50.
Using dump function for 50, will return C1 33...
How can i make to convert C1 33 back to value 50??
I think that is the same of the utl_raw.cast_to_number, but i'm using Oracle 8, and this function is in Oracle 9...
Anyone have idea ??

How to convert raw to jpeg in aperture???

I am new to this and cannot figure out how to save it in Jpeg

When you export an image, you select a file format such as JPG (and much else besides). Until you export raw images, you should keep them raw, as that allows you to retain much more data, and gives you much more latitude in changes you can make to the image.

How to convert RAW files that saved in UCCX server to wav file?

Similar Messages

Maybe you are looking for