How to convert real media files to quicktime for iPod

I want to know how to convert a real media file into a format that is recognizable by my iPod. Do I need to convert it into a Quicktime movie? And if I already have quick time movies on my computer, will they play on my iPod without any need of conversion?
Thanks

MP4 is the format you need. You will need a third party program to convert it for viewing on your ipod. See this link
http://forums.ilounge.com/showthread.php?s=&threadid=123067
There are many freeware programs out there for convertering. Beware of people that will direct you to a site where you have to pay for the program. There are many Spammers on this forum that will try to have you buy a particular program. Do a search for free conversion programs and you will find many.

Similar Messages

  • Convert Real Media files to Apple Tv?

    Anyone know of a good program that will convert Real Media files to an Apple Tv friendly format?
    Thanks.

    Try FFMPEGX. http://ffmpegx.com/index.html
    Reads the following input formats: MPEG-1, MPEG-2, MPEG-4, DIVX, XviD, non-encrypted VOB and VIDEO_TS, Quicktime .MOV, .DV, .WAV, Real Audio, Real Video, H.263, MP4 H.264, PGM, YUV, PPM, AC3, PCM8/16 bits, mulaw/Alaw, WMA-1/2, SUN AU format, MP2, MP3, AAC, 3GP, FPS1, ALAC, and even more formats
    Converts the above formats to DivX, AVI XviD, H.264 MP4, MOV, DV, 3GP, Sony PSP, MP2, MP3, AAC, AC3, MPEG-1, MPEG-2, VCD, CVD, SVCD, KVCD, KSVCD, DVD, KDVD and MPEG-TS with complete control over encoding options.

  • How to convert windows media file to QT?

    Quality issues aside, I have been given a windows media file to put on DVD. What program can convert it to QT so I can bring it in to FCP?
    Regards to all.

    flip4mac wmv components
    http://www.flip4mac.com/wmv.htm

  • How to Trim Real Media File .rm In Macintosh?

    Any idea?

    "Record" it as it plays using any audio capture software. I use WireTap.
    If you can't get the correct timing you can open and edit the recording using QuickTime Pro.

  • Real Media to Quicktime for iPod?

    Anyone know of a program that can convert Real Media files to Quicktime mpeg4 or h264 for the new iPod?

    Snapz Pro X 2 should do all or most of what you want.

  • Can I convert a RealPlayer media file to quicktime ?

    I just got a new iMac and I'm goofing with .Mac/iDisk . I have a RealPlayer movie that I would like to move to the new computer so I put it into iDisk . On the old eMac on the iDisk it shows as a Real Player Media File but in the new computers iDisk it's a exec file ?. I tried to open it with QT so now it calls itself a QT player document but it won't open .
    Can I convert a RealPlayer media file to quicktime ?
    iMac 2.33 GHz- Powerbook - eMac   Mac OS X (10.4.8)  

    You said you wanted to convert it, which led me to believe that you wanted to use the video, not just play it. If all you want is to play the file, then Real Player is all you need. The free version has no ads.

  • How to upload an real media file and give it as link to users access

    How can we upload an real media file into htmldb? How can we give it as link in the application to play from the client PC real player. Any help is appreciated

    Hi,
    The following is the program[Click Here| http://saptechnical .com/Tips/ABAP/email/EmailProgram.txt] which will send any format file. Actual Creator of the program is Amit Bisht.
    Thanks & Regards,
    Rock.

  • Rm - Real Media Files - Conversion to MV4

    Someone sent me a rm video file (Real Media) that I would like to play on my Xbox 360. Does anyone know how to convert an RM file to mov or mv4 or avi or some other video file format that is supported by something other than Real Media? I would be happy to purchase a converter if someone can recommend a good one.
    I only expect to do this one time, BTW.
    Bill

    Sorenson Squeeze 6
    http://www.sorensonmedia.com/video-encoding/?kk=sorenson%20squeeze&kt=21c9f7b1-f78b-4f95-b0c0-c1f9f45c4893&gclid=CMTr14j-1J4CFRQhDQodew0qdw
    Your not going the like the price...

  • Will Quicktime Pro convert/compress .dv files to Quicktime?

    I have .dv movies that are taking up so much space on my hard-drive. I purchased Quicktime Pro to compress those files so they will take up less space. I don't see in the tutorial how to do this. Could someone please point me in the right direction so I can see how to do this? Thanks!

    Will Quicktime Pro convert/compress .dv files to Quicktime?
    Of course.
    I don't see in the tutorial how to do this. Could someone please point me in the right direction so I can see how to do this?
    This is impossible to do until you define what you mean by "QuickTime."
    Basically, a "QuickTime" (MOV) file is any form of dat that can be placed in an MOV file container -- not a compression format in and of itself. Therefore, your first step is to determine what you really want to do here. For instance, a DV (.dv) stream file normally consists of an audio DV compressed track along with a video DV compressed track. DV(25) files normally contain audio and video tracks having a data rate on the order of 28.5 Mbps each (or about a 57 Mbps total average data rate). As you indicated, these do make for rather large files. You could, of course, reduce the total data rate by nearly half if you merge the original video track with AIFF (linear PCM) converted audio (or even smaller if you use an AAC audio track). The catch here is that QT Pro does not have a DV "pass thorough" video option which allows you to simply convert the audio while retaining the original DV video. So unless you are willing to manually convert the audio track and then manually replace the original Audio track with your converted audio, you would normally have to convert both audio and video to another compression format.
    In this latter case, you could select any valid codec supported by QT as augmented by installed components. Typical possibilities would be AIC/AIFF, unlimited H.264/AAC, Motion-JPEG/AIFF Photo-JPEG/AIFF, supported MPEG4/AAC or H.264/AAC profiles with limited data rates. These compression options are all compatible with iMovie '08 editing and represent a full range of possible data rates (which in turn determine your final file size). For instance, an AIC/AIFF file would normally end up with a total data rate on the order of 20-22 Mbps with an unlimited H.264/AAC about 16-18 Mbps, M-JPEG 10 Mbps, Photo-JPEG 8-9 Mbps, and MPEG4/AAC or H.264 as low as you can stand the loss in quality and still retain a video track.
    These various compression formats basically represent a compromise between file size and quality with the quoted data rates being typical for SD content with an "average" quality setting. While actual data rates are always dependent on the actual file converted, the stated averages should provide some idea as to what you could expect in comparison to your original source file -- i.e., the AIC/AIFF file would be expected to be about 62-65% the size of your DV file, unlimited H.264/AAC 28-31%, M-JPEG/AIFF 17-18%, Photo-JPEG 14-15%, and MPEG4/AAC or H.264/AAC in the 3-5% range with "reasonable" quality levels.
    Since each codec has somewhat different characteristics and user options, I will not go into specifics for each here. What I would recommend at this point is for you to select a short file with typical content and convert it wising the various codecs and determine what compromise in file size and quality you can live with at the display size you plan to use. This in turn will likely depend to some extent on what you plan to do with the final file. For the archiving of files for later use/editin, you like want files to retain as much quality as possible which, in turn, usually implies large file sizes. On the other hand, distribution files can be much more highly compressed as a "finished" product which you don't intend to re-compress or edit further. Remember, when you compress a file more compact format you are literally "throwing away" data so you should be most judicious in selecting that appropriate format to which to compress your files for the saving of file space.

  • Any way of getting Real Media files to play in Front Row?

    I was just wondering if there is any way to get Real Media files to play in Front Row? I realise this is probably not possible, but I thought I'd ask people who know more about this than me!!
    I do have Real Player installed if that helps......

    Probably not right now. Since Front Row uses iPhoto to play slideshows, the DVD Player to play DVDs, iTunes to play MP3s and the QuickTime Player to play videos, there's no way now to change the default video player application. All of those connections are hard-wired into the software. Apple has not released any kind of SDK (software development kit) for third parties to add on to Front Row, so it would have to be an unauthorized hack to get another video player to run. I might suggest you send Apple some Mac OS X feedback and let them know you'd like to see third party add-ons to Front Row.
    -Doug

  • How to convert .tod extension files

    how to convert .tod extension files for use in final cut pro

    DLewis from rocklin wrote:
    Unfortunately you can not convert .TOD file extensions for Final Cut Pro to use.  The .TOD is something proprietary that JVC used a few years ago.  The best thing to use is MPEG Streamclip and convert the .TOD files to a Quicktime file using the AIC codec from the convert settings in the MPEG Streamclip program. 
    Good advice, except for the AIC codec part. The native codec for FCP X is ProRes. Use ProRes 422.
    (AIC was used by FCE and is still used by iMovie; while you can use it with FCP X, it is not the preferred codec).

  • Need to convert ajp video file to quicktime

    Need to convert ajp video file to quicktime any ideas?

    More info needed.
    Where is this file? What software made it? If Web based could you provide a link?

  • How to convert the javasource file(*.class) to execute file(*.exe)?

    How to convert the javasource file(*.class) to execute file(*.exe)?
    thank you!

    Although i have seen a few programs (that are platform specific) that will embed a small jvm into an exe with your class file, it is generally excepted that you cannot create an executable file using java. The JAR executable file is probably the closest your going to get
    Pete

  • How to convert java class file version without decompiling

    Hi,
    Oracle R12.1.3 i am having illegal access error while try to access the class file version Java 1.3 uses major version 47,So how to convert the class file version without using decompiling.
    Current java version is 1.6.0_07
    Is there any tool or API for converting class file version?
    Thanks,
    Selvapandian T

    Beside this I wonder where you get your error from since AFAIK 12c comes with java 1.6.
    Well wonder no more!
    OP isn't using Oracle 12c database.
    They are using Oracle R12.1.3 - which is the E- Business Suite.

  • How to convert a class file to exe file and how to cteate a class file to d

    how to convert a class file to exe file

    Hi Bhaskarq,
    Hi,
    It is not at all possible.
    But it is a really worst method.
    Please go through it.
    This is a very common question asked in the comp.lang.java newsgroup. Its often useful to have an
    executable application when deploying your
    applications to a specific platform, but remember to
    make your .class files available for users running
    Unix/Macintosh/other platforms.
    Microsoft provide a free system development kit (SDK),
    for Java, which includes the jexegen tool. This
    will convert class files into a .EXE form. The only
    disadvantage is that users need a Microsoft Java
    Virtual Machine (JVM) installed. If your target
    platform is Win32, you can either redistribute the
    virtual
    machine, or raise the level of your system
    requirements, to include Windows 98, or Windows 95
    with
    Internet Explorer 4. Systems matching these
    requirements will already have a copy of the Microsoft
    Java Virtual Machine installed.
    Note : You must specify all of the class files your
    application needs (except for standard java packges)
    as a parameter, so if you have third party libraries,
    you'll need to include them as well. You can use wildcards * though, and you don't need the original source code.
    Also please see this Forum which will give a good idea
    http://forum.java.sun.com/thread.jsp?forum=31&thread=149733
    I hope this will help you.
    Thanks
    Bakrudeen
    Technical Support Engineer
    Sun MicroSystems Inc, India

Maybe you are looking for