How to convert tdms to standard bin?

Is there any tool to convert tdms files into standard bin files? I would like to convert the tdms in a standard bin file to open and analyze it out of Labview. Converting the tdms to a sound file wave or aiff file would also work. Thank you.

mcas wrote:
Thank you. The "standard" bin format I need has to include one single header of 1 Bit and must be 16 bits. Is there any tool available to convert tdms to this bin format? thank you very much.
That means absolutely nothing. 1 bit of what? What does the 1 bit represent? 16 bits of what? What do the 16 bits represent? Are you saving values as 16-bit numbers? As I noted, there is no tool to convert TDMS files to bin files since the format is user-specific. You need to use the Write Binary FIle VIs to generate your binary file.

Similar Messages

How to convert tdms to ascii files?

Hello,
I need to convert *.tdms files to an ascii file. I have 16 channels and scalling coefficient information in the tdms file, With the TDMS-Image Viewer i can see the 1-D array waveform perfectly, but I cant write it to an ascii file. When I use a signalexpress.vi or the spreetsheat.vi for writing an LVM/ascii file, information gets lost. (Red symbol at INPUT!!!!)
Please answer me, because I dont have lots of experience with labview and an ascii file is more easier to handle for me! I found only export to matlab and exel, but i just want it in an ascii file. Reading the tdms and opening it is no problem, but connecting the right blocks to the 1D array waveform without dataloss doesnt work.
thank you for reading
danny

Thank you for reply,
i have the new version 8.5. With signalexpress.vis i can do asciis but the red symbol (at input) is there so i dont want to get information lost.
The tdms file has header information for scalling factors and unscalled data for 16 channels.
so because tdms files are faster for writing i want to convert them to ascii with a Convertion Vi, but it seems that with an express vi he stops because it cant handle handle with the headerinformation.
now i use the signalexess vi to write tdms data, before i did it manully by setting channel and group information.
Please tell me if the red symbol AT input of a Signalexpress VI does matter? its a 1D array wavefrom that goes in to the input.
thank you for this discussion, i hope that i dont need to use the matlab import option for tdms!!
greetings danny

How to convert tdm files to lvm files?

I am trying to convert a number of TDM files to LVM files. I got error (2553) when I execute my VI. I dont know why.
1. Can anybody help me? I attached the VI.
Thank you.
Hyunseok
Attachments:
Conversion TDM to LVM.vi ‏121 KB

Hi Hyunseok
I changed your VI to a single file converter (see attched VI) and it works out well with LabVIEW 2009. Is there any special within your TDM files? Can you provide an example file which does not work?
Additionally I'm curious why you want to convert TDM to LVM since there are a bunch of tools to directly work with TDM files in other applications (Find Resources for Reading and Writing TDMS Files in Third-Party Products)
Stefan
Attachments:
Simple Conversion of TDM to LVM.vi ‏61 KB

How to convert HD to standard DV

Hi,
I am still shooting and editing standard definition mini DV tapes on an older Mac. I do have a digital camera that takes HD video. I have taken some videos with my digital camera that I would like to convert so that I can edit them into my Standard DV videos. I have access to an intel Mac for convert them, but will be editing the footage in standard definition.
So, please let me know the best way to convert my HD to SD video or standard DV.
Thank you

IMovie09 will import all of your movie clips - Standard MiniDV and Hi-Definition and even AVCHD off a digital camcorder or camera with HD Movie facility.
You can work with all of these clips together and when finished editing you can export into many different formats. If you export to iDVD to burn onto a disk, this will of course scale your footage down to Standard Definition.

How to convert one standard program to another standard program

Hi All,
i want to convert 2 stnadard report. i have no idea. plze give right sucession set by step
following the standrad report.
1: RMCB0100.
2: RM07DOCS
how to convert both report.
thanks regards
Ambrish

Dear Ambarish,
This is Sd Forum . it is no possible to covert one standard program into standard program. We can copy this into Zprogram if you need. This is a basic question . Please close the thread if it is answered.
Regards,
Madhu.

How to Convert the Warning Message to Error Message in Standard Transaction

Hi,
I face one problem in Standard Transaction Code CS02. In that by entering the material Number, Plant, bomstatus press enter. it gives a warning message. How to convert the Warning message to Error. In abap how to do that. Please help me.

Mohan,
It appears that there is some configuration you can do for BOM Message types to change the message type. The IMG link for this function is:
Production->Basic Data->Bill of Material->General Data->Change Message Type
However you need to read the IMG documentation to see if this will work for you. There are only certain messages that can be changed with this configuration step.
Also, please do not double post questions in the forums.
Best Regards,
Chris H.

How to convert a Word Document to SAP SCript standard text.

Hi team,
Does any one know how to convert a word document or text in Word format to standard text.
So that we can use that standard text in Script output.
This might be very useful if we need to convert a lot of text into standard text.

Hi,
Create the name of the standard text you want in SO10.
When the editor is called up, select Text -> Upload and then browse for your file(s). Must be saved in RTF format in Word remember.
Cheers
Colin.

Does anyone know how to convert the output from the standard report to xml?

Does anyone know how to convert the output from the standard SAP report to xml?

since it a standard report which you cannot modify you can only do the following.
submit report exporting list to memory
then
list from memory and then
use the returned itab along with CALL TRNSFORMATION key word to convert to xml.
but this only going to place the whole list content (including data and formating lines,etc) into a xml element and not the actual data alone in the list .

How to convert 2 standard report??

Hi All,
i want to convert 2 stnadard report. i have no idea. plze give right sucession set by step
following the standrad report.
1: RMCB0100.
2: RM07DOCS
how to convert both report.
thanks regards
Ambrish

Hi All,
I am trying to link 2 reports to one report and get the data of only one report according to the main reports data.
I have 2 reports.
1: RMCB0100.
2: RM07DOCS
Received and payment reports contain the detailed data of the main report.
If I link the Received and payment reports to he main report through hyperlinks. and If I select one ID in main report the detailed report should be either received or payment report depending on the Type that particular ID has.
eg.
the main report has the following data
ID Amount Type
000234 36000 Received
000235 -64000 Payment
If I select 000234 then report should get linked to Received report and display received report data.
If I select 000235 then report should get linked to payment report and display payment report data.
plz give right sucession set by step
Thanks & Regards
Ambrish

How to convert class file

Hi all, I am new in java card development.
This is my environment setting:
@echo off
set JC_HOME=C:\JavaCard\java_card_kit-2_2
set JAVA_HOME=C:\j2sdk14103
set PATH=.;%JC_HOME%\bin;%PATH%
I have created the Wallet applet according to 'Zhiqun Chen" text book and named it WalletApp.java.
I have compiled this file to a class file.
This is where is I saved my file
C:\JavaCard\java_card_kit-2_2\samples\src\com\sun\javacard\samples\WalletApp\WalletApp.java.
But I don't really understand how to convert the class file.
May I know what is this for?
-out EXP JCA CAP
-exportpath
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1
com.sun.javacard.samples.HelloWorld.HelloWorld
com.sun.javacard.samples.HelloWorld
0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
must save this in what file?
I tried to type in the command line below (and the result):
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sap
les\Wallet\Wallet.opt
error: file scr\com\sun\javacard\saples\Wallet\Wallet.opt could not be found
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
use file for all options and parameters to converter
Where options include:
-classdir <the root directory of the class hierarchy>
set the root directory where the Converter
will look for classes
-i support the 32-bit integer type
-exportpath <list of directories>
list the root directories where the Converter
will look for export files
-exportmap use the token mapping from the pre-defined export
file of the package being converted. The converter
will look for the export file in the exportpath
-applet <AID class_name>
set the applet AID and the class that defines the
install method for the applet
-d <the root directory for output>
-out [CAP] [EXP] [JCA]
tell the Converter to output the CAP file,
and/or the JCA file, and/or the export file
-V, -version print the Converter version string
-v, -verbose enable verbose output
-help print out this message
-nowarn instruct the Converter to not report warning messages
-mask indicate this package is for mask, so restrictions on
native methods are relaxed
-debug enable generation of debugging information
-nobanner suppress all standard output messages
-noverify turn off verification. Verification is default
*********************************************************May I know What is the correct command line to convert the class file and what must I do to before converting the class file?
I saw some article saying we must use JDK1.3, is it a must?
Your solution is highly appreciated.
Thank you!

Hi Ricardo,
I saved the file below as WalletApp.opt in the directory of scr\com\sun\javacard\samples\WalletApp
-out EXP JCA CAP
-exportpath c:\javacard\java_card_kit-2_2\api_export_files
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2:0x1 WalletApp.WalletApp
WalletApp 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x2 1.0
But I still have the problem below:
C:\JavaCard\java_card_kit-2_2\samples>converter -config scr\com\sun\javacard\sam
ples\WalletApp\WalletApp.opt
error: file scr\com\sun\javacard\samples\WalletApp\WalletApp.opt could not be fo
und
Usage: converter <options> package_name package_aid major_version.minor_ver
sion
OR
converter -config <filename>
May I know What's wrong with my command or file?
Where can I download JDK because what I can find is J2SDK.
Thank you!

How to convert Classical Report into PDF format..........

Hi Experts,
I have written a classical report with write statements and when i am downloading in excel the format is mismatching and now i want to convert into PDF format.
How to convert into PDF format from Classical report ?
Yusuf

Hi yusuf,
please find the below report,,
please make two include programs before executing it,
there codes are pasted below,
INCLUDE zimpr_data_declaration.
INCLUDE zimpr_performs_wrap.
REPORT zimpr_word_wrap NO STANDARD PAGE HEADING LINE-SIZE 115..
 INCLUDE for DATA DECLARATION *
INCLUDE zimpr_data_declaration.
 INCLUDE for all performs. *
INCLUDE zimpr_performs_wrap.
TOP-OF-PAGE--
TOP-OF-PAGE.
PERFORM f_top_page. "TOP OF THE REPORT PAGE,I.E. HEADER.
START-OF-SELECTION.
SET PF-STATUS 'SEL_SCREEN'. "PF-STATUS OF THE SELECTION SCREEN.
PERFORM f_data_retrieval. "PERFORM FOR ALL SELECT STATEMENTS.
PERFORM f_report_display. "REPORT DISPLAY,WRITE STATEMENTS.
--Define the actions to be performed for pf-status-----
AT USER-COMMAND.
wf_ok_code = sy-ucomm.
wf_save_ok = wf_ok_code.
CLEAR wf_ok_code.
CASE wf_save_ok.
 WHEN 'PDF'. "WHEN PDF ICON IS CLICKED,REPORT WILL CONVERT INTO PDF.
 loc_repid = sy-repid. "PROGRAM NAME
--THIS FM SETS THE PARAMETERS FOR LAYOUT OF PDF OUTPUT--
 CALL FUNCTION 'GET_PRINT_PARAMETERS'
 EXPORTING
 layout = loc_paart "LANDSCAPE LAYOUT
 line_size = loc_linsz "CHARACTER WIDTH OF REPORT
 no_dialog = 'X'
 user = sy-uname "USERNAME
 IMPORTING
 out_parameters = loc_print_parms "OUTPUT PARAMETERS WILL BE COLLECTED HERE.
 valid = loc_valid
 EXCEPTIONS
 archive_info_not_found = 1
 invalid_print_params = 2
 invalid_archive_params = 3
 OTHERS = 4.
--FOR GENERATING THE SPOOL NUMBER--
 NEW-PAGE PRINT ON NO DIALOG PARAMETERS loc_print_parms. " This allocates the spool no
 "to the screen without the dialog screen.
 PERFORM f_top_page.
 PERFORM f_report_display.
 NEW-PAGE PRINT OFF. "This marks the end of the screen for which the spool no was generated.
 wf_id = sy-spono. " This assign the spool no of the screen to the variable.
--PERFORM FOR GETTING THE PDF OUTPUT--
 PERFORM f_pdf_display.
--PERFORM FOR DOWLOADING FILE TO A LOCAL DISK--
 PERFORM f_download_local.
 WHEN 'BACK'.
 LEAVE PROGRAM.
ENDCASE.
include data declaration----
*& Include ZIMPR_DATA_DECLARATION
TYPE-POOLS : shlp.
DATA : wf_ordert TYPE aufk-auart. "ORDER TYPE
DATA : wf_order TYPE aufk-aufnr. "ORDER NUMBER
DATA : wf_bdate TYPE afko-gstrp. "BASIC START DATE
DATA : wf_status(4) TYPE c ."rihea-i_astatin. "STATUS
DATA : wf_objnr TYPE jest-objnr VALUE 'OR%'. "Object number
DATA : wf_aufnr TYPE aufk-aufnr.
DATA : wf_name TYPE thead-tdname. "NAME TO PASS IN FM READ_TEXT
DATA : wf_date1(12) TYPE c. "DATE
DATA : wf_i1(3) TYPE n,wc_i1(3) TYPE n VALUE '1'. "COUNTERS FOR REPORT DISPLAY
DATA : wf_i2(3) TYPE n,wc_i2(3) TYPE n VALUE '1'.
DATA : wf_kopf TYPE tdid VALUE 'KOPF',wf_aufk TYPE tdobject VALUE 'AUFK'.
DATA : wf_save_ok TYPE sy-ucomm ,wf_ok_code TYPE sy-ucomm.
DATA: wf_id TYPE tsp01-rqident , " For storing Spool request number
 wf_bytes TYPE i . " For storing the bytes of data to be converted to PDF.
DATA : wf_langu(2) TYPE c VALUE 'EN'.
DATA: wf_pripar TYPE pri_params, " Structure for Passing Print Parameters
 wf_rcpar TYPE arc_params. " ImageLink structure
DATA : wf_statu TYPE dfies-fieldname VALUE 'STATUS',
 wf_field TYPE help_info-dynprofld VALUE 'S_STATUS'.
&--SELECTION SCREEN--
SELECTION-SCREEN BEGIN OF BLOCK b_1 WITH FRAME TITLE text-000.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_ordert FOR wf_ordert . "ORDER TYPE
SELECT-OPTIONS: s_order FOR wf_order OBLIGATORY. "ORDER NUMBER
SELECT-OPTIONS: s_bdate FOR wf_bdate. "BASIC START DATE
SELECT-OPTIONS: s_status FOR wf_status matchcode object zei_sys . "SYSTEM STATUS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN END OF BLOCK b_1.
*--INTERNAL TABLES--
TYPES : BEGIN OF ty_aufk,
 aufnr TYPE aufk-aufnr, "OREDR NUMBER
 auart TYPE aufk-auart, "ORDER TYPE
 objnr TYPE aufk-objnr, "OBJECT NUMBER
 ktext type aufk-ktext, "SHORT TEXT
 gstrp TYPE afko-gstrp, "BASIC START DATE
 END OF ty_aufk.
TYPES : BEGIN OF ty_tj02t,
 objnr TYPE aufk-objnr, "OBJECT NUMBER
 txt04 TYPE tj02t-txt04, "STATUS
 istat TYPE tj02t-istat, "Object status
 spras TYPE tj02t-spras, "LANGUAGE KEY
 END OF ty_tj02t.
TYPES : BEGIN OF ty_temp,
 objnr TYPE aufk-objnr,
 status(300) TYPE c,
 END OF ty_temp.
TYPES : BEGIN OF ty_wrap,
 line(54) TYPE c, "LONG TEXT
 END OF ty_wrap.
TYPES : BEGIN OF ty_wrap2,
 line(25) TYPE c, "STATUS
 END OF ty_wrap2.
TYPES : BEGIN OF ty_f4,
 txt04 TYPE tj02t-txt04,
 txt30 TYPE tj02t-txt30,
 END OF ty_f4.
types : begin of ty_sta,
 istat type tj02t-istat,
 objnr type jest-objnr,
 end of ty_sta.
data : int_sta type table of ty_sta with header line.
DATA : int_f4 TYPE TABLE OF ty_f4 WITH HEADER LINE.
DATA: int_pdf TYPE TABLE OF tline WITH HEADER LINE. "TABLE FOR PDF CONVERSION
DATA: int_wrap TYPE TABLE OF ty_wrap WITH HEADER LINE. "TABLE FOR LONGTEXT
DATA: int_wrap2 TYPE TABLE OF ty_wrap2 WITH HEADER LINE. "TABLE FOR STATUS
DATA: int_temp TYPE TABLE OF ty_temp WITH HEADER LINE. "Table for concatenation of system status.
DATA: int_aufk TYPE TABLE OF ty_aufk WITH HEADER LINE.
DATA: int_tj02t TYPE TABLE OF ty_tj02t WITH HEADER LINE.
DATA: int_tline TYPE STANDARD TABLE OF tline WITH HEADER LINE. "TABLE FOR READ_TEXT.
DATA : int_fld TYPE TABLE OF dfies ,wa_fld LIKE LINE OF int_fld. " Field Type for FM for F4 help
DATA :int_return TYPE TABLE OF ddshretval WITH HEADER LINE .
DATA:
loc_print_parms LIKE pri_params, "PRINT PARAMETERS
loc_valid(1) TYPE c,
loc_file type SDOK_CHTRD,
loc_bytecount TYPE i, "NUMBER OF BYTES TRANSFERRED
loc_length TYPE i, "LINE-LENGTH
loc_rqident LIKE tsp01-rqident, "SPOOL NUMBER
loc_rq2name(12) TYPE c.
DATA: loc_filename LIKE rlgrap-filename. "FILENAME
DATA:loc_repid LIKE sy-repid, " Report to execute
 loc_linsz LIKE sy-linsz VALUE 115, " Line size
 loc_paart LIKE sy-paart VALUE 'X_65_132'. " Paper Format
Include ZIMPR_PERFORMS_WRAP----
*& Include ZIMPR_PERFORMS_WRAP
*& Form f_top_page
 top-of the page
--> p1 text
<-- p2 text
FORM f_top_page .
*--HEADER--
FORMAT COLOR 1 .
WRITE : text-010.
FORMAT COLOR 1 OFF.
WRITE : / text-011,sy-datum NO-GAP.
WRITE : / text-012,sy-uzeit NO-GAP,90 text-013,101 sy-uname.
ULINE .
FORMAT COLOR 1 INTENSIFIED OFF .
WRITE : 1 sy-vline, "HEADINGS
2 text-014 NO-GAP,
7 sy-vline,
8 text-015 NO-GAP,
20 sy-vline,
21 text-016 NO-GAP,
76 sy-vline,
77 text-017 NO-GAP,
88 sy-vline,
 89 text-018 NO-GAP,
115 sy-vline.
WRITE : /1 sy-vline,
 2 text-019 NO-GAP,7 sy-vline,
 20 sy-vline,76 sy-vline,77 text-020 NO-GAP,88 sy-vline,115 sy-vline.
ULINE.
FORMAT COLOR 1 OFF.
ENDFORM. " f_top_page
*& Form f_data_retrieval
 select statements
--> p1 text
<-- p2 text
FORM f_data_retrieval .
SELECTING ORDER TYPE,ORDER NO.,OBJECT NO. AND BASIC START DATE
SELECT p~aufnr
 p~auart
 p~objnr
 p~ktext
 r~gstrp
 FROM ( aufk AS p INNER JOIN afko AS r ON raufnr = paufnr )
 INTO TABLE int_aufk
 WHERE p~aufnr IN s_order AND
 p~auart IN s_ordert AND
 r~gstrp IN s_bdate AND
 p~objnr LIKE wf_objnr.
IF sy-subrc <> 0.
 MESSAGE s101(zipm). "no values found for selection criteria.
 STOP.
ENDIF.
SORT int_aufk BY aufnr.
DELETE ADJACENT DUPLICATES FROM int_aufk.
SELECT q~istat
 p~objnr
 FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
 INTO TABLE int_sta
 FOR ALL ENTRIES IN int_aufk
 WHERE p~objnr = int_aufk-objnr
 AND q~txt04 IN s_status and
 q~spras = wf_langu and
 p~inact = ''.
IF sy-subrc <> 0.
 MESSAGE s101(zipm). "no values found for selection criteria.
 STOP.
ENDIF.
SORT int_sta BY objnr.
DELETE ADJACENT DUPLICATES FROM int_sta.
*--SELECTING OBJECT NO.,STATUS AND LANGUAGE--
IF int_sta[] IS NOT INITIAL.
 SELECT p~objnr
 q~txt04
 q~istat
 q~spras
 FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
 INTO TABLE int_tj02t
 FOR ALL ENTRIES IN int_sta
 WHERE p~inact = '' AND
 p~objnr = int_sta-objnr AND
 q~spras = wf_langu AND
 q~txt04 IN s_status AND
 p~objnr LIKE wf_objnr.
 IF sy-subrc <> 0.
 MESSAGE s101(zipm). "no values found for selection criteria.
 STOP.
 ENDIF.
ENDIF.
ENDFORM. " f_data_retrieval
*& Form f_report_display
 report display
--> p1 text
<-- p2 text
FORM f_report_display .
LOOP AT int_tj02t. "concatenating the status into a internal table
 AT NEW objnr.
 CLEAR int_temp-status.
 ENDAT.
 CONCATENATE int_temp-status int_tj02t-txt04 INTO int_temp-status SEPARATED BY space.
 AT END OF objnr.
 int_temp-objnr = int_tj02t-objnr. "key field.
 APPEND int_temp.
 CLEAR int_temp.
 ENDAT.
 CLEAR int_tj02t.
ENDLOOP.
LOOP AT int_aufk.
 CONCATENATE sy-mandt int_aufk-aufnr INTO wf_name . "concatenating client number and order number
*--THIS FM CAPTURES THE LONG TEXT AND STORES IT IN INTERNAL TABLE--
 CALL FUNCTION 'READ_TEXT'
 EXPORTING
 id = wf_kopf "TEXT ID
 language = sy-langu "LANGUAGE
 name = wf_name "TEXT NAME
 object = wf_aufk "TEXT OBJECT
 TABLES
 lines = int_tline "LINES OF LONG TEXT.
 EXCEPTIONS
 id = 1
 language = 2
 name = 3
 not_found = 4
 object = 5
 reference_check = 6
 wrong_access_to_archive = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 int_tline-tdline = int_aufk-ktext.
 APPEND int_tline.
 CLEAR :int_tline.
 ENDIF.
 LOOP AT int_tline.
*--THIS FM WRAPS THE LONG TEXT INTO 54 CHARACTERS EACH--
 CALL FUNCTION 'RKD_WORD_WRAP'
 EXPORTING
 textline = int_tline-tdline "LONG TEXT LINE
 outputlen = 54 "OUTPUT LENGTH
 TABLES
 out_lines = int_wrap "INTERNAL TABLE
 EXCEPTIONS
 outputlen_too_large = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 CLEAR :int_tline.
 ENDIF.
 ENDLOOP.
*-- THIS FM WRAPS THE STATUS INTO 25 CHARACTERS EACH--
 READ TABLE int_temp WITH KEY objnr = int_aufk-objnr.
 CALL FUNCTION 'RKD_WORD_WRAP'
 EXPORTING
 textline = int_temp-status
 outputlen = 25
 TABLES
 out_lines = int_wrap2
 EXCEPTIONS
 outputlen_too_large = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 CONTINUE.
 ENDIF.
 IF NOT int_wrap2[] IS INITIAL.
 ULINE AT (115).
 ENDIF.
 DESCRIBE TABLE int_wrap LINES wf_i2. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP
 DESCRIBE TABLE int_wrap2 LINES wf_i1. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP2
 WHILE ( wc_i1 LE wf_i1 OR wc_i2 LE wf_i2 ).
 IF ( wc_i2 LE wf_i2 ).
 READ TABLE int_wrap INDEX wc_i2 . "READING THE INTERNAL TABLE INT_WRAP WITH INDEX
 wc_i2 = wc_i2 + 1.
 ENDIF.
 IF ( wc_i1 LE wf_i1 ).
 READ TABLE int_wrap2 INDEX wc_i1 . "READING THE INTERNAL TABLE INT_WRAP2 WITH INDEX
 wc_i1 = wc_i1 + 1.
 ENDIF.
*--THIS FM CONVERTS THE DATE FROM SYSTEM FORMAT TO OUTPUT FORMAT--
 CALL FUNCTION 'CONVERSION_EXIT_SDATE_OUTPUT'
 EXPORTING
 input = int_aufk-gstrp
 IMPORTING
 output = wf_date1.
 IF NOT int_wrap2[] IS INITIAL .
*--REPORT DISPLAY--
 WRITE : /1 sy-vline, 2 int_aufk-auart COLOR = 4 INTENSIFIED OFF NO-GAP ,
 7 sy-vline ,8 int_aufk-aufnr COLOR = 4 INTENSIFIED OFF NO-GAP,
 20 sy-vline,21 int_wrap-line,
 76 sy-vline ,77 wf_date1 ,
 88 sy-vline ,89 int_wrap2-line,
 115 sy-vline.
*--CLEARING THE VARIABLES--
 wf_date1 = ''.
 CLEAR: int_aufk,int_temp,int_wrap2-line,int_wrap-line.
 ENDIF.
 ENDWHILE.
 wc_i1 = 1.
 wc_i2 = 1.
 CLEAR :int_wrap,int_wrap2.
 REFRESH : int_wrap,int_wrap2,int_tline.
ENDLOOP.
ULINE AT (115).
ENDFORM. " f_report_display
*& Form F_PDF_DISPLAY
 pdf conversion
--> p1 text
<-- p2 text
FORM f_pdf_display .
*--THIS FM CONVERTS THE SPOOL REQUEST INTO PDF REPORT--
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = wf_id "SPOOL NUMBER
 no_dialog = space
 pdf_destination = 'X'
 IMPORTING
 pdf_bytecount = loc_bytecount "NUMBER OF BYTES TRANSFERRED
 TABLES
 pdf = int_pdf "TABLE FOR PDF REPORT
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
ENDFORM. " F_PDF_DISPLAY
*& Form f_download_local
 download to local system
--> p1 text
<-- p2 text
FORM f_download_local .
---------------------THIS FM DOWNLOADS THE PDF REPORT INTO LOCAL MACHINE
data loc_ret TYPE iwerrormsg.
CALL FUNCTION 'IW_C_GET_SAPWORKDIR'
 IMPORTING
 SAPWORKDIR = loc_file
 ERROR_MSG = loc_ret
loc_filename = loc_file.
if loc_ret is initial.
concatenate loc_filename '\work order header long text_ ' sy-timlo '.pdf' into loc_filename.
endif.
CALL FUNCTION 'DOWNLOAD'
 EXPORTING
 bin_filesize = loc_bytecount "NO. OF BYTES
 filename = loc_filename "DEFAULT FILE NAME
 filetype = 'BIN'
 IMPORTING
 act_filename = loc_filename
 TABLES
 data_tab = int_pdf.
ENDFORM. " f_download_local
if you have any doubts,,
please revert
Regards,
Talwinder

How to Convert spool which is for smartform output to PDF?

how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,

Procedure
 When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
[code]*&---------------------------------------------------------------------*
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
 cparam type ssfctrlop,
 outop type ssfcompop,
 fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
 pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
 tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
 file_size TYPE i,
 bin_filesize TYPE i,
 FILE_NAME type string,
 File_path type string,
 FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
 bookings type ty_bookings,
 connections type ty_connections.
start-of-selection.
***************** suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
 where customid = p_custid
 and carrid in s_carrid
 order by primary key.
select * from spfli into table connections
 for all entries in bookings
 where carrid = bookings-carrid
 and connid = bookings-connid
 order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
 exporting formname = p_form
* variant = ' '
* direct_call = ' '
 importing fm_name = fm_name
 exceptions no_form = 1
 no_function_module = 2
 others = 3.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 exit.
endif.
* calling the generated function module
call function fm_name
 exporting
* archive_index =
* archive_parameters =
 control_parameters = cparam
* mail_appl_obj =
* mail_recipient =
* mail_sender =
 output_options = outop
 user_settings = SPACE
 bookings = bookings
 customer = customer
 connections = connections
 importing
* document_output_info =
 job_output_info = tab_otf_data
* job_output_options =
 exceptions formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 others = 5.
if sy-subrc <> 0.
* error handling
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
 format = 'PDF'
 max_linewidth = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
IMPORTING
 bin_filesize = bin_filesize
* BIN_FILE =
TABLES
 otf = tab_otf_final
 lines = pdf_tab
EXCEPTIONS
 err_max_linewidth = 1
 err_format = 2
 err_conv_not_possible = 3
 err_bad_otf = 4
 OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILE_NAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* WITH_ENCODING =
* PROMPT_ON_OVERWRITE = 'X'
CHANGING
 filename = FILE_NAME
 path = FILE_PATH
 fullpath = FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* NOT_SUPPORTED_BY_GUI = 3
* others = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*************downloading the converted PDF data to your local PC********
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
 bin_filesize = bin_filesize
 filename = FULL_PATH
 filetype = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
 filelength = file_size
TABLES
 data_tab = pdf_tab
* FIELDNAMES =
EXCEPTIONS
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 OTHERS = 22
IF sy-subrc <> 0.
ENDIF.
[/code]
Thanks and Regards,
Pavankumar

How to convert a class file to exe file and how to cteate a class file to d

how to convert a class file to exe file

Hi Bhaskarq,
Hi,
It is not at all possible.
But it is a really worst method.
Please go through it.
This is a very common question asked in the comp.lang.java newsgroup. Its often useful to have an
executable application when deploying your
applications to a specific platform, but remember to
make your .class files available for users running
Unix/Macintosh/other platforms.
Microsoft provide a free system development kit (SDK),
for Java, which includes the jexegen tool. This
will convert class files into a .EXE form. The only
disadvantage is that users need a Microsoft Java
Virtual Machine (JVM) installed. If your target
platform is Win32, you can either redistribute the
virtual
machine, or raise the level of your system
requirements, to include Windows 98, or Windows 95
with
Internet Explorer 4. Systems matching these
requirements will already have a copy of the Microsoft
Java Virtual Machine installed.
Note : You must specify all of the class files your
application needs (except for standard java packges)
as a parameter, so if you have third party libraries,
you'll need to include them as well. You can use wildcards * though, and you don't need the original source code.
Also please see this Forum which will give a good idea
http://forum.java.sun.com/thread.jsp?forum=31&thread=149733
I hope this will help you.
Thanks
Bakrudeen
Technical Support Engineer
Sun MicroSystems Inc, India

How to use sdk in standard B1?

Hi,All
How to use sdk in standard B1? I want to use "sum in words" be thai languag which in standard no have so i must create it use sdk but i don't know that have solution using sdk in standard. example, Go menu Sales-A/R>Delivery and input data i want to convert price in Total to text which i use sdk for convert it But i don't khow that when i will call sdk? Can do in standard?

Hi Virasak,
You need to develop a (eventually small) application (= Add-On) which uses the SDK to do what you need it to do + is packaged and installed like e.g. any SAP Add-On.
It should then just watch out for the "right" events which are propagated from the SAP Business One application through UI API (an interface in the SDK) to "interested" Add-On(s)...
HTH,
Frank

How to convert date format in XI? Help!

Hi Experts,
PIP is the input for XI.
The PIP has date as : <DateTimeStamp>20030515T000000.000Z</DateTimeStamp>.
How to convert it into MM/DD/YYYY format in XI?
Thanks
Gopal

hi,
use two standard functions:
substring (to take first 8 chars from this field)
DateTrans to change 20030515 to MM/DD/YYYY
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
that's all you need to do very simple
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How to convert tdms to standard bin?

Similar Messages

Maybe you are looking for