How to convert Templates into tables under Smartforms

Hi Gurus,
I need to print internal table data onto a Template. But I'm wondering as how to convert a Template into Table. It is very urgent.
Answers are rewardable.
-Syed.

Hi ,
Why do you wantto use templates as table control .
You should use table control in place of template to dipslay contents of an internal table .
To use table control as template put template inside a loop . Im not sure it works or not .
Regards

Similar Messages

HOW TO CONVERT STRUCTURE INTO INTERNAL TABLE

HOW TO CONVERT STRUCTURE INTO INTERNAL TABLE

lets declare a structure --
data: begin of str,
      name(10),
      age(3),
      city(10),
      end of str.
lets now convert this to an internal table itab --
data itab like table of str.
I hope this helps
regards,
-pankaj singh

How to Convert spool which is for smartform output to PDF?

how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,

<b>Procedure</b>
     When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
<b>Here is a sample code of program to perform the function.</b>
SAMPLE CODE
[code]*&---------------------------------------------------------------------*
*& Report ZAMIT_SMART_FORM_PDF                                        *
REPORT ZAMIT_SMART_FORM_PDF                    .
data: carr_id type sbook-carrid,
      cparam type ssfctrlop,
      outop type ssfcompop,
      fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
      pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
      tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
      file_size TYPE i,
      bin_filesize TYPE i,
      FILE_NAME type string,
      File_path type string,
      FULL_PATH type string.
parameter:      p_custid type scustom-id default 1.
select-options: s_carrid for carr_id     default 'LH' to 'LH'.
parameter:      p_form   type tdsfname   default 'ZAMIT_SMART_FORM'.
data: customer    type scustom,
      bookings    type ty_bookings,
      connections type ty_connections.
start-of-selection.
***************** suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook   into table bookings
           where customid = p_custid
           and   carrid in s_carrid
           order by primary key.
select * from spfli into table connections
           for all entries in bookings
           where carrid = bookings-carrid
           and   connid = bookings-connid
           order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
       exporting formname           = p_form
*                 variant            = ' '
*                 direct_call        = ' '
       importing fm_name            = fm_name
       exceptions no_form            = 1
                  no_function_module = 2
                  others             = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
* calling the generated function module
call function fm_name
       exporting
*                 archive_index        =
*                 archive_parameters   =
                 control_parameters   = cparam
*                 mail_appl_obj        =
*                 mail_recipient       =
*                 mail_sender          =
                 output_options       = outop
                 user_settings        = SPACE
                 bookings             = bookings
                  customer             = customer
                  connections          = connections
      importing
*                 document_output_info =
                 job_output_info      = tab_otf_data
*                 job_output_options   =
       exceptions formatting_error     = 1
                  internal_error       = 2
                  send_error           = 3
                  user_canceled        = 4
                  others               = 5.
if sy-subrc <> 0.
*   error handling
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   format                      = 'PDF'
   max_linewidth               = 132
*   ARCHIVE_INDEX               = ' '
*   COPYNUMBER                  = 0
*   ASCII_BIDI_VIS2LOG          = ' '
IMPORTING
   bin_filesize                = bin_filesize
*   BIN_FILE                    =
TABLES
    otf                         = tab_otf_final
    lines                       = pdf_tab
EXCEPTIONS
   err_max_linewidth           = 1
   err_format                  = 2
   err_conv_not_possible       = 3
   err_bad_otf                 = 4
   OTHERS                      = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
*    WINDOW_TITLE         =
*    DEFAULT_EXTENSION    =
*    DEFAULT_FILE_NAME    =
*    FILE_FILTER          =
*    INITIAL_DIRECTORY    =
*    WITH_ENCODING        =
*    PROMPT_ON_OVERWRITE = 'X'
CHANGING
    filename             = FILE_NAME
    path                 = FILE_PATH
    fullpath             = FULL_PATH
*    USER_ACTION          =
*    FILE_ENCODING        =
* EXCEPTIONS
*    CNTL_ERROR           = 1
*    ERROR_NO_GUI         = 2
*    NOT_SUPPORTED_BY_GUI = 3
*    others               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*************downloading the converted PDF data to your local PC********
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   bin_filesize                    = bin_filesize
   filename                        = FULL_PATH
   filetype                        = 'BIN'
*   APPEND                          = ' '
*   WRITE_FIELD_SEPARATOR           = ' '
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
IMPORTING
   filelength                      = file_size
TABLES
    data_tab                        = pdf_tab
*   FIELDNAMES                      =
EXCEPTIONS
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   OTHERS                          = 22
IF sy-subrc <> 0.
ENDIF.
[/code]
Thanks and Regards,
Pavankumar

How to convert mysql into bekerley db?

i have a mysql database ,there is a table in it ,only have 7 fields:symbol,date,open,high,low,close,vol.
would you mind to tell me how to convert it into bekerley db?

Hello,
You can build a drop-in replacement for SQLite by specifying the
--enable-sql_compat flag to Berkeley DB's configure script. This
creates a binary, sqlite3 which has the same interface as SQLite.
The "Getting Started with the Oracle Berkeley DB SQL API" and FAQ
have the details:
http://www.oracle.com/technology/products/berkeley-db/faq/db_faq.html
http://www.oracle.com/technology/documentation/berkeley-db/db/bdb-sql/index.html
Thanks,
Sandra

How to convert rows into column

Hi,
can any one help me how to convert rows into column by pl/sql procedure.
Thanks and Regards

http://www.oracle.com/technology/oramag/code/tips2004/050304.html
-- dropping the sample table if exists
drop table rowstocol
-- create sample table
create table rowstocol ( name varchar2(20));
-- Inserting rows into sample table
insert into rowstocol values('Amit Zhankar');
insert into rowstocol values('Piyu Yawalkar');
insert into rowstocol values('Piyu Yawalkar');
insert into rowstocol values('Ashish Ghelani');
insert into rowstocol values('Aditi Zhankar');
insert into rowstocol values('Tom Kyte');
insert into rowstocol values('Oracle');
-- Following query should be run to create a sql. This result sql should be run to convert rows to column.
-- The following query uses just the tablename (whose data is to be converted) and name of the column (which is to be converted).
-- Example taken here is table rowstocol, column name.
SELECT cc
FROM (select decode(rn ,1 ,'Select ',null) ||' MAX (CASE WHEN dr = '|| rownum||' THEN DECODE (rn,1, col1) END) '||
decode(rn,maxr,' col1 from ','||'||chr(39)||','||chr(39)||'|| ') cc,rn,maxr
from (SELECT ROWNUM rn,count(0) over() maxr FROM rowstocol) order by rn) trows
union all
select '(SELECT tabs.col1, DENSE_RANK () OVER (ORDER BY col1,rowid) dr,dense_rank() OVER (order by 1) rn
FROM (SELECT NAME col1 FROM rowstocol) tabs ) group by rn' cc from dual;
-- The result of this query will do the reqd conversion from row to column.
-- Replace table rowstocol by your table, column name by your column.
CC
Select MAX (CASE WHEN dr = 1 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 2 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 3 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 4 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 5 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 6 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 7 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 8 THEN DECODE (rn,1, col1) END) col1 from
(SELECT tabs.col1, DENSE_RANK () OVER (ORDER BY col1,rowid) dr,dense_rank() OVER (order by 1) rn
FROM (SELECT NAME col1 FROM rowstocol) tabs ) group by rn
Select MAX (CASE WHEN dr = 1 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 2 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 3 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 4 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 5 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 6 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 7 THEN DECODE (rn,1, col1) END) ||','||
MAX (CASE WHEN dr = 8 THEN DECODE (rn,1, col1) END) col1 from
(SELECT tabs.col1, DENSE_RANK () OVER (ORDER BY col1,rowid) dr,dense_rank() OVER (order by 1) rn
FROM (SELECT NAME col1 FROM rowstocol) tabs ) group by rn;
COL1
Aditi Zhankar,Amit Zhankar,Ashish Ghelani,Oracle,Oracle,Piyu Yawalkar,Piyu Yawalkar,Tom Kyte
Edited by: bhooma on Jan 20, 2009 2:44 AM

How to convert rows into columns

Hi,
How to convert rows into columns of two different tables.
These two tables have two common columns namely (shipline,pos).
Let me know if we have any built in functions to do this.
thank you very much .
Edited by: 808542 on Dec 7, 2010 8:35 PM
Edited by: 808542 on Dec 7, 2010 8:37 PM

Have you tried this first?
http://forums.oracle.com/forums/search.jspa?threadID=&q=row+to+column&objID=f75&dateRange=last90days&userID=&numResults=15&rankBy=10001

How to convert report into alvgrid please hepl

how to convert report into alvgrid please hepl

BALVSD01 check this program u will know r see below code
sample prog
REPORT ZMAT11                                  .
TYPE-POOLS : slis.
TABLES : mkpf,
         mseg,
         t001w,
         t001l.
TYPES : BEGIN OF ty_t001w,
          werks TYPE t001w-werks,
          name1 TYPE t001w-name1,
        END OF ty_t001w,
        BEGIN OF ty_makt,
          matnr TYPE makt-matnr,
          maktx TYPE makt-maktx,
        END OF ty_makt,
        BEGIN OF ty_t001l,
          lgort TYPE t001l-lgort,
          lgobe TYPE t001l-lgobe,
        END OF ty_t001l.
DATA : BEGIN OF it_mat OCCURS 0,
        mblnr LIKE mseg-mblnr,
        zeile LIKE mseg-zeile,
        mjahr LIKE mseg-mjahr,
        bldat LIKE mkpf-bldat,
        budat LIKE mkpf-budat,
        bwart LIKE mseg-bwart,
        matnr LIKE mseg-matnr,
        maktx LIKE makt-maktx,
        erfmg LIKE mseg-erfmg,
        erfme LIKE mseg-erfme,
        werks LIKE mseg-werks,
        name1 LIKE t001w-name1,
        lgort LIKE mseg-lgort,
        lgobe LIKE t001l-lgobe,
        umwrk LIKE mseg-umwrk,
        name2 LIKE t001w-name1,
        umlgo LIKE mseg-umlgo,
        lgobe1 LIKE t001l-lgobe,
        END OF it_mat.
DATA : it_t001w TYPE TABLE OF ty_t001w
                 WITH HEADER LINE,
       it_makt TYPE TABLE OF ty_makt
               WITH HEADER LINE,
       it_t001l TYPE TABLE OF ty_t001l
                WITH HEADER LINE.
DATA : ls_layout TYPE slis_layout_alv,
       it_fcat TYPE slis_t_fieldcat_alv ,
       wa_fcat TYPE slis_fieldcat_alv,
       lh TYPE slis_t_listheader,
       ls TYPE slis_listheader,
       it_events TYPE slis_t_event ,
       ls_event TYPE slis_alv_event ,
       w_var TYPE i.
DATA : l_date(10).
DATA : l_date1(20),
       ztabix LIKE sy-tabix.
DATA : l_repid LIKE trdir-name.
l_repid = 'ZMAT11'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_werks FOR mseg-werks,
                 s_lgort FOR mseg-lgort,
                 s_umwrk FOR mseg-umwrk,
                 s_umlgo FOR mseg-umlgo,
                 s_bwart FOR mseg-bwart,
                 s_budat FOR mkpf-budat,
                 s_mjahr FOR mkpf-mjahr.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
SELECT SINGLE * FROM t001w INTO t001w
                          WHERE werks IN s_werks.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Supplying Plant'.
ENDIF.
SELECT SINGLE * FROM t001w INTO t001w
                          WHERE werks IN s_umwrk.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Receiving Plant'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
                          WHERE lgort IN s_lgort.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Supplying St.Loc'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
                          WHERE lgort IN s_umlgo.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Receiving St.Loc'.
ENDIF.
START-OF-SELECTION.
ls-typ = 'H'.
ls-info = 'Material Document List'.
APPEND ls TO lh.
ls-typ = 'S'.
WRITE: sy-datum TO l_date USING EDIT MASK '__/__/____'.
CONCATENATE 'DATE :' l_date INTO l_date1 SEPARATED BY space.
ls-info = l_date1.
APPEND ls TO lh.
PERFORM field_cat.
PERFORM f001_get_data.
END-OF-SELECTION.
IF it_mat[] IS INITIAL.
    MESSAGE i000(8i) WITH 'No data Found'(m01).
    EXIT.
ENDIF.
PERFORM process_data.
PERFORM display_data.
*&      Form f001_get_data
      text
--> p1        text
<-- p2        text
FORM f001_get_data .
SELECT amblnr azeile amjahr abwart a~matnr
           aerfmg aerfme awerks algort aumwrk aumlgo
           b~budat
           b~bldat INTO CORRESPONDING FIELDS OF TABLE it_mat
                   FROM mseg AS a
             INNER JOIN mkpf AS b
                ON amblnr = bmblnr
               AND amjahr = bmjahr
             CLIENT SPECIFIED
          WHERE a~mandt EQ sy-mandt
            AND a~werks IN s_werks
            AND a~lgort IN s_lgort
            AND a~umwrk IN s_umwrk
            AND a~umlgo IN s_umlgo
            AND a~bwart IN s_bwart
            AND b~budat IN s_budat
            AND b~mjahr IN s_mjahr.
IF sy-subrc = 0.
    SELECT matnr maktx INTO TABLE it_makt FROM makt
    CLIENT SPECIFIED
    FOR ALL ENTRIES IN it_mat
    WHERE mandt EQ sy-mandt
      AND matnr = it_mat-matnr.
ENDIF.
SELECT werks name1 INTO TABLE it_t001w FROM t001w
CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
    MESSAGE i000(8i) WITH 'No Plant Found'(m02).
ENDIF.
SELECT lgort lgobe INTO TABLE it_t001l FROM t001l
CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
    MESSAGE i000(8i) WITH 'No Storage Location Found'(m03).
ENDIF.
ENDFORM.                    " f001_get_data
*&      Form field_cat
      text
--> p1        text
<-- p2        text
FORM field_cat .
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MBLNR'.
wa_fcat-key = 'X'.
wa_fcat-hotspot = 'X'.
wa_fcat-ref_fieldname = 'MBLNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material Doc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ZEILE'.
wa_fcat-ref_fieldname = 'ZEILE'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Item No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MJAHR'.
wa_fcat-ref_fieldname = 'MJAHR'.
wa_fcat-ref_tabname = 'MSEG'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BWART'.
wa_fcat-ref_fieldname = 'BWART'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Mvmt Type'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BLDAT'.
wa_fcat-ref_fieldname = 'BLDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Document Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BUDAT'.
wa_fcat-ref_fieldname = 'BUDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Posting Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-ref_fieldname = 'MAKTX'.
wa_fcat-ref_tabname = 'MAKT'.
wa_fcat-seltext_m = 'Material Description'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFMG'.
wa_fcat-ref_fieldname = 'ERFMG'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Quantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFME'.
wa_fcat-ref_fieldname = 'ERFME'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Uom'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Supplying Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME1'.
wa_fcat-seltext_m = 'S.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGORT'.
wa_fcat-seltext_m = 'Supplying St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE'.
wa_fcat-seltext_m = 'Su.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMWRK'.
wa_fcat-seltext_m = 'Receiving Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME2'.
wa_fcat-seltext_m = 'R.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMLGO'.
wa_fcat-seltext_m = 'Receiving St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE1'.
wa_fcat-seltext_m = 'Re.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
ENDFORM.                    " field_cat
*&      Form process_data
      text
--> p1        text
<-- p2        text
FORM process_data .
LOOP AT it_mat.
    ztabix = sy-tabix.
    READ TABLE it_makt WITH KEY matnr = it_mat-matnr.
    IF sy-subrc = 0.
      it_mat-maktx = it_makt-maktx.
    ENDIF.
    IF it_mat-bwart+2(1) = '2'.
      it_mat-erfmg = - ( it_mat-erfmg ).
    ENDIF.
    READ TABLE it_t001w WITH KEY werks = it_mat-werks.
    IF sy-subrc = 0.
      it_mat-name1 = it_t001w-name1.
    ENDIF.
    READ TABLE it_t001w WITH KEY werks = it_mat-umwrk.
    IF sy-subrc = 0.
      it_mat-name2 = it_t001w-name1.
    ENDIF.
    READ TABLE it_t001l WITH KEY lgort = it_mat-lgort.
    IF sy-subrc = 0.
      it_mat-lgobe = it_t001l-lgobe.
    ENDIF.
    READ TABLE it_t001l WITH KEY lgort = it_mat-umlgo.
    IF sy-subrc = 0.
      it_mat-lgobe1 = it_t001l-lgobe.
    ENDIF.
    MODIFY it_mat INDEX ztabix .
ENDLOOP.
ENDFORM.                    " process_data
*&      Form display_data
      text
--> p1        text
<-- p2        text
FORM display_data .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
          I_INTERFACE_CHECK                 = ' '
          I_BYPASSING_BUFFER                = ' '
          I_BUFFER_ACTIVE                   = ' '
           i_callback_program                = l_repid
          I_CALLBACK_PF_STATUS_SET          = ' '
           i_callback_user_command           = 'LINE'
           i_callback_top_of_page            = 'TOP'
          I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
          I_CALLBACK_HTML_END_OF_LIST       = ' '
          I_STRUCTURE_NAME                  =
          I_BACKGROUND_ID                   = ' '
          I_GRID_TITLE                      =
          I_GRID_SETTINGS                   =
          IS_LAYOUT                         =
           it_fieldcat                       = it_fcat
          IT_EXCLUDING                      =
          IT_SPECIAL_GROUPS                 =
          IT_SORT                           =
          IT_FILTER                         =
          IS_SEL_HIDE                       =
          I_DEFAULT                         = 'X'
          I_SAVE                            = ' '
          IS_VARIANT                        =
          it_events                         =
          IT_EVENT_EXIT                     =
          IS_PRINT                          =
          IS_REPREP_ID                      =
          I_SCREEN_START_COLUMN             = 0
          I_SCREEN_START_LINE               = 0
          I_SCREEN_END_COLUMN               = 0
          I_SCREEN_END_LINE                 = 0
          IT_ALV_GRAPHICS                   =
          IT_HYPERLINK                      =
          IT_ADD_FIELDCAT                   =
          IT_EXCEPT_QINFO                   =
          I_HTML_HEIGHT_TOP                 =
          I_HTML_HEIGHT_END                 =
        IMPORTING
          E_EXIT_CAUSED_BY_CALLER           =
          ES_EXIT_CAUSED_BY_USER            =
          TABLES
            t_outtab                          = it_mat
        EXCEPTIONS
          PROGRAM_ERROR                     = 1
          OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_data
*&      Form TOP
      text
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = lh
I_LOGO                   =
I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP

How to convert .class into .jar file

Hi,
How to convert .class into .jar file

jsf_VWP5.5.1 wrote:
Hi,
How to convert .class into .jar fileFrom a command prompt, cd to the location of your .class file(s).
If you want to create a simple jar, use: jar -cf Whatever.jar Whatever.class
If you want to compile all .class files in a directory into a jar, use *.class instead.
Now, I'm going to assume you want to create an executable jar... here's how to do that:
1) Create a blank text file; for this example, lets call it main.txt.
2) In the first line of main.txt, type: Main-class: Whatever ('Whatever' should be the name of the class in your program where the main() method is located)
3) Press enter to go to the next line (someone please correct me if I'm wrong, but if you don't insert the line break/CR after the Main-class: statement, this will not work... in my experience, this is true)
4) Make sure you save this file in the same directory as your .class file(s).
5) Type: jar -cmf Whatever.jar main.txt Whatever.class
...and that's about it. For more information on the usage of the jar command and to understand the switches (such as -cmf), try jar --help.
Hope that helps.

How to convert BLOB into a String

Hi,
I got a blob column from the database.
It contains one XML File.
How to convert it into String.
I need the code for how to convert the blob into String
Thanks in Advance.

A blob would be a byte-array, which you can use in the String(byte[]) constructor

How to convert rows into columns with decode function

Hi,
How to convert rows into columns with the help of decode function in oracle.
thanks and regards
P Prakash

say
col1 col2
1 10
2 20
3 30
then use
select col1,
sum(decode(col2,10,10)) "new1"
sum(decode(col2,20,20))"new2"
sum(decode(col2,30,30))"new3"
from table_name
group by col1;
we used sum u can use ny function if wont u have to give the column name i.e col2 name also
so i think u got it nw
regards

How to convert files into DAT?

Does anyone know how to convert files into DAT? Not The other way around please.

This might do it:
http://www.videoconverterformac.com/dat-converter-for-mac.html
but can't imagine why you would want to!

How to convert bytes[] into File object

hi
how to convert byte array into File object
pls.. help me
Regards
srinu

rrrr007 wrote:
Hi,
How to convert bytes[] into multipage File object?? ]There's no such thing as a "multipage File object." You ought to re-read this thread closely, and read the [API docs for File|http://java.sun.com/javase/6/docs/api/java/io/File.html] to clear up your confusion about what a File object is.
I used the java.io.SequenceInputStream to concatenate two input streams (basically .pdf files) into a single input stream. I need to create a single multipage pdf file using this input stream. Then you need a pdf API, like iText or fop. You can't just concatenate pdf files, word docs, excel sheets, etc., like you can text files. Google for java pdf api.

How to convert idoc into xml/edifact

hi everyone just now i have started to work on edi, i want to kno how to convert idoc into xml/edifact. plz reply asap

Firstly, I will reply when and if I choose to. I do not require the asap nonsense at the end of your sentence.
EDIFACT - You will need a subsystem.
XML - I am not 100%. It may also depend on what version of SAP you are on. As I do not know if later versions of SAP can convert IDoc to XML.

How to Convert frames into minutes and seconds

Hi,
does anyone know how to convert frames into time (minutes and
seconds). I need the users to view the swf with current time being
played and over time. I have 2152 frames in total and I want that
to be converted to time. Can anyone help me on this. I would really
appreciate it. It is very urgent!!!!
Thanks

Time Indicator,
> does anyone know how to convert frames into time
(minutes
> and seconds).
That depends entirely on the framerate of the movie. At the
default
12fps, 12 frames would be one second; 24 frames would be two.
At 24fps, 24
frames would be one second.
> I need the users to view the swf with current time being
played
> and over time. I have 2152 frames in total and I want
that to be
> converted to time. Can anyone help me on this. I would
really
> appreciate it. It is very urgent!!!!
Judging by your four exclamation points, I'd say it's
definitely urgent!
Well, again, if you're at 12fps, 2152 frames would take 179
seconds, or 2
minutes and 59 seconds. I arrived at that number by dividing
2152 by 12.
Keep in mind, though, framerate is actually more of a
guideline than an
exact figure. Framerate determines the rate at which Flash
will *try* to
display content. On an especially slow computer, the Flash
Player may not
be able to keep up, and the same number of frames might
actually take more
time.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

How to convert byte into string

can any tell me how to convert byte into string
when im an debugging thid code in eclipse it shows the result in integer format instead of string but in command prompt it is showing result in string format..........plz help
package str;
import java.io.*;
public class Testfile {
public static void main(String rags[])
byte b[]=new byte[100];
try{
FileInputStream file=new FileInputStream("abc.txt");
file.read(b,0,50);
catch(Exception e)
System.out.println("Exception is:"+e);
System.out.println(b);
String str=new String(b);
System.out.println(str);
}

Namrata.Kakkar wrote:
errors: count cannot be resolved and Unhandled exception type Unsupported Encoding Exception.
If i write an integer value instead of "count" then Unhandled exception type Unsupported Encoding Exception error is left.This is elementary. You need to go back to [http://java.sun.com/docs/books/tutorial/|http://java.sun.com/docs/books/tutorial/] .

How to convert Templates into tables under Smartforms

Similar Messages

Maybe you are looking for