How to convert Test Executive 4 sequence file to TestStand 3.0 or 3.1?

Is there any way to convert Test Executive 4.0 sequence file into TestStand 3.0 or 3.1 format? I found a converter vi here, but it only takes the file made with TE/LV 5.0 or later. Thanks.

I'd ask NI very nicely for a free loan of the newer test executive! As it's only for converting to TestStand and TestExec is now a museum piece, they'll probably let you borrow it. Or they may even do it for you.
Might be worth speaking to your NI rep - presumably he's had a few lobster lunches from the commission from your sales.
Otherwise - re-write your sequences. This might be quicker anyway, depending on the length of your sequences.

Similar Messages

Testand will not convert my labWindows CVI sequence file to a TestStand sequence file.

Testand will not convert my labWindows CVI sequence file to a TestStand sequence file.
Attachments:
ACC3.squ ‏3 KB

If you are using an older version of the CVI Test Exec toolkit, check with your local Field Sales rep to see about getting the necessary software to use for temporarily upgrading your existing Test Exec sequences to version 2.0 for migrating to TestStand.

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra

How to get the loaded client sequence file path/name?

I added a step in Process model, and wanted to get currently loaded client sequence file name/path. I used the variable of "SequenceFile.Path" but then I realized what I would get is the process model file path, not loaded client sequence file path/name. How can I get loaded client sequence file path/name?
Thanks!
Jacky

I dont understand what you are trying to achieve. Can you provide more information.
If you are trying to dynamically load and run a client sequence file at run time you need to make a couple of calls to the TS API from inside the process model, Engine.GetSequenceFileEx to get a reference to your sequence identified by its pathname, and then Execution.ClientFile to tell the process model which sequence you want to run.
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't.

How to convert database table into xml file

Hi.
How to convert database table into XML file in Oracle HTML DB.
Please let me know.
Thanks.

This not really a specific APEX question... but I search the database forum and found this thread which I think will help
Exporting Oracle table to XML
If it does not I suggest looking at the database forum or have a look at this document on using the XML toolkit
http://download-east.oracle.com/docs/html/B12146_01/c_xml.htm
Hope this helps
Chris

How to load programmatically from CVI the specific sequence file in TestStand 3.1

I am trying to implement TestStand from Windows/CVI 3.1. I need to insert a specific sequence file in TestStand, with all other sequences unloaded. I used TSUI_ApplicationMgrCloseAllSequenceFiles() and TSUI_ApplicationMgrOpenSequenceFile(), but after Username/Password prompt, the TestStand loaded all the old sequences. How to eliminate this?

Hello,
I created a function that calls those two methods. When I made a simple CVI button and in a callback for it, I call my function, it does successfully close all open sequencefiles and then load the one I specified; however, it does not work when I call the function just before the call to RunUserInterface! I am very surprised by this and will be bringing it up with our R&D department. There is a simple work-around. Instead of closing all open sequencefiles at the beginning of the OI, close them at the end instead. I have modified the full-featured OI for you and tagged in the code where I made changes. This should do exactly what you want (you may want to change the code around to make it a little cleaner...I left more in code in than I needed for instructive purposes). Please let me know if you have any questions about this. Take care!
Regards,
Aaron B.
National Instruments
Attachments:
TestExec.c ‏55 KB

Anyone know how to convert a 3D sphere .STL file into a .igs file?

Anyone know how to convert a 3D sphere .STL file into a .igs file?

And for what? Why? This would be kinda atrocious and awful, but weird things happen...
Mylenium

To pass parameter values to the object reference of action step in sequence file of teststand programatically using C#.

//Initialize the Engine
            EngineClass myEngine = new EngineClass();
            myEngine.LoadTypePaletteFilesEx(TypeConflictHandlerTypes.ConflictHandler_Prompt, 0);
            Step myStep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname,StepTypes.StepType_Action);
            myStep.Name = "object";
            DotNetModule dotnetmodule = myStep.Module as DotNetModule;
            dotnetmodule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File,@"C:sequence.dll");
            dotnetmodule.ClassName = "CN";
            dotnetmodule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
            dotnetmodule.MemberName = "ISI";
mySequence.Locals.NewSubProperty("object", PropertyValueTypes.PropValType_Reference, false, "", 0);
Sequence mySequence = myEngine.NewSequence();
            mySequence.Locals.NewSubProperty(varName, PropertyValueTypes.PropValType_Reference, false, String.Empty, 0);
mySequence.InsertStep(myStep, 0, StepGroups.StepGroup_Main);
            SequenceFile seqFile = myEngine.NewSequenceFile();
            seqFile.InsertSequence(mySequence);
seqFile.Save("C:\\mySeq.seq");
I have done this,dynamically creating a sequence file in teststand programatically through c#.
Problem is
1.I created an action step and object Reference variable for the step, but i am not able to pass parameter values to the objectReference
2.I am not able to load the sequence in to the main Sequence of the sequence file in the teststand. How can I do these two things.

Hi,
have you ever followed on my Links ?!?!?
If not please jump to this one
http://forums.ni.com/ni/board/message?board.id=330&thread.id=26880
and read the the answer from Mannoch
starting with this words:
Anthony -
Currently, functionality for retrieving the Metadata Token for a class constructor or member is not fully provided in the TestStand .NET Adapter API. The DotNetModule.GetConstructorMetadataToken() and DotNetModule.GetMetadataToken() methods only return the correct Metadata Token when the member/constructor prototypes have already been loaded. Thus, in the case of your code, when you call DotNetModule.GetMetadataToken(), the method is returning -1 because the member prototype for the Step you are referring to has not yet been loaded.
That means have to do a workaround for your stuff.
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

How do I save a running sequence file

Part of my testing requires a large number of variables to be passed to and from the UUT within TestStand. I can store some of these variables in the station globals, but I'd like the option to store others in the sequence files at run time and save them to disk (save the sequence file) at the end of the test. I can create variables in the station globals and commit the globals to disk just fine (LabVIEW vi's using the TestStand API). However, I cannot figure out how to do the same thing with a sequence file. My code is able to create and populate the locals variables with no problem, but I cannot save the running sequence file to disk with the new locals (or file globals) intact (they disappear when the sequence ends.) The reason I want to save the sequence file is to avoid manually entering all these variables into each sequence file locals list.
So, I think the questions are:
How do I make the new locals or file globals a part of the running sequence file?
How do I save the sequence file to disk before it stops running?
I can increment the change count on the file. I have figured out two or three ways to save the file while it's running without errors (although I doubt it's actually doing anything.) I'm using the TestStand API in LabVIEW vi's to pull this off and cannot find the functions I'm looking for.
Sorry if this is rambling, it's kind of hard to describe.

Hi Lars,
The reason that we can't save the local variables created during
runtime is because TestStand creates a runtime copy of the variables
when the sequence starts. After the sequence is finished executing,
this copy is discarded. The reason behind this is that TestStand allows
for a single sequence to have multiple executions at the same time, and
each instance gets its own runtime copy of the local variables. If new
locals could be saved to the actual sequence file in memory, it could
cause major problems for other execution threads of that particular
.seq file.
You can use the API to add variables to the actual file using
GetSequenceFileEx and incrementing the Change Count, or create a
separate sequence that modifies another sequence file, but adding these
locals to the sequence file from itself isn't possible.
Hope this helps Lars,
Have a good one.
Dan Weiland
Applications Engineer
National Instruments
www.ni.com/support
Dan Weiland

How to revert changes made to sequence file dynamically

Problem synopsis:
1. TestUUTs entry point of custom process model, which is based on NI SequentialModel is being executed.
2. PreUUT step of process model set Execution.ClientFile according to serial number, provided by operator.
3. During sequence execution step module inserts additional steps into running sequence.
4. After first UUT loop iteration sequence contain all the original steps plus all the steps, which were added dynamically. This is exactly what I need.
5. Next UUT loop iteration is executing on updated sequence file. This is what I trying to prevent.
This design is serving following requirements:
a) dynamically load test sequence
b) dynamically add test results.
So my question is: how to implement this correctly?
I tried to release sequence file of previous iteration ("Engine.ReleaseSequenceFileEx") but it "SequenceFile.CanUnload==false" and "SequenceFile.IsExecuting==true".
But this happens during execution of PreUUT of process model. I think, at this point client sequence shall not be executing.
Steps 2. and 3. (see above) are executed in dll written using MS VC++ 2005.
TestStand is 3.5.0.725
Help me please.
Thanks,
Misha

rishi_86 wrote:
i have created a jTable in netbeans6. The table model is DefaultTableModel.
i'm not understanding the concept of firecellupdate and other events listeners.
i want the changes i make to the table during runtime to be written into a Text file.
any help would be greatly appreciated.you need to add the TableModelListener to your table model.
for example:
model.addTableModelListener(new TableModelListener() {
            public void tableChanged(TableModelEvent e) {
                // TODO Auto-generated method stub
         });then, you need to put your custom business logic(saving data to a text file, etc) into the tableChanged method.
From TableModelEvent you can get all information about the model changes.

How to edit 16bit TIFF image sequence file in FCP?

Dear all,
I have a number of 16 bit TIFF image sequence files (2048 x 1024 resolution) - some of them are RED footage, and others came directly from our f/x guy. We are going into a color correction session in a post house and we've been asked to provide a sequential 16 bit TIFF image sequence of the edited time line.
I need to do a cross dissolve b/w most of the clips I have. I have created image sequence QT movie (reference files) from the TIFF images. Though they play fine in QT player, when I try importing into FCP, I am met with a "general error". I tried both dragging it into QT, as well as File --> Import.
I am wondering what can I do to get these clips into FCP in order to apply the cross dissolve transitions I need. Is this a problem relating to the 16bit nature of the TIFF files?
I tried exporting the TIFF image sequence standalone QT movie, and those imported fine. However, I have a feeling that the standalone movie conversion also decrease my bit depth from 16 to 8. (When I do my final TIFF output from FCP after dissolves / transitions had been applied, each TIFF file is now 8 MB instead of 12 MB, hence my suspicion that the bit depth is adjusted).
Are there any settings I am missing, or does FCP simply don't support 16 bit image sequence reference file. As a test, I had also converted all my TIFF to jpg, and created jpeg image sequence reference file. These reference QT file can be successfully imported to FCP and I can edit them as if they are a clip.
If FCP is not able to handle these files, what are my other options? After Effects?
Any help is appreciated.
Thank you.
Michael
<Edited by Moderator>

As far as I know, both FCP and Color only support up to 10 bit color, which is 1024 levels for each color channel, more than enough for avoiding color banding.
If you need 16 bit for sure, I believe AE will support 16 bit output. Another 16 bit application would be the extended version of Photoshop, which has some limited time line capability.

How to convert java class to dll file for using in Microsoft Technology(.n)

hey hemmj !!!!!!
nice replying , first of all i d like to say thanks for response me so frequently..... i like such type of guy... i d never forget ur online support.
hey buddy, i ve a problem with applet application...
i m working on java chat server build on swing applet. As it is chat server, it is divided into two parts, one is server application and other is client application. I want to run this server app on the client server and the basic thing with this site is that it is running on .net platform(Microsoft). and the other app ll running on the client machine or end user. Now the problem is that this site would run only if the server app ll be run on server. This server app ll open the socket of server, which ll listen the request of the user...... So, the requirement is to convert this java sever class file into dll file and register this dll file with the IIS server.So, It run and stop with the IIS server.
I ve already search the way to convert the java class file into dll file. This is possible in such way........... below code is for the java class file...
import java.net.*;
import java.io.*;
import java.util.*;
public class chatServer
public static void main(String args[]) throws Exception
ServerSocket sersoc=new ServerSocket(1234);// Any port number above 1000 should do
// as most ports below 1000 are used by system
Vector socvec=new Vector();
String data="";int i,j=0;
BufferedReader in;
//System.out.println("Listening of port " + sersoc.getLocalPort());
//System.out.println("Waiting for connections...");
while(true)
Socket soc=sersoc.accept();
socvec.addElement(soc);
chatServerReadThread csrt=new chatServerReadThread(socvec, soc);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
PrintStream out=new PrintStream(soc.getOutputStream());
out.println("Connected to chat server");
out.flush();
data= in.readLine();
for(i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
out=new PrintStream(soc.getOutputStream());
out.println(data + " connected");
out.flush();
//System.out.println(data + " connected");
csrt.start(); // error is comming from here..... plz help me.
class chatServerReadThread extends Thread
Vector socvec;
PrintStream out;
chatServerReadThread(Vector socvec, Socket soc)
this.socvec=socvec;
try
out=new PrintStream(soc.getOutputStream());
}catch(Exception e){}
public void run()
try
String data;
Socket soc;
BufferedReader in;
while(true)
for(int i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
if(in.ready())
try
data=in.readLine();
if(data.charAt(0) == ']')
data = in.readLine() + " exited";
//System.out.println(data);
socvec.removeElement(soc);
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
else
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
}catch(Exception e){socvec.removeElement(soc);}
}catch(Exception e){e.printStackTrace();}
first i ve made the jar file of this class
jar cvf chatServer.jar chatServer.classafter getting the jar chatServer.jar. I ve opened the .net dos prompt and
type this command which ll make dll file automatically....
> jbimp /t:library chatServer.jar
And you'll see the following output:
Microsoft (R) Java-language bytecode to MSIL converter version 1.1.4322.0
for Microsoft (R) .NET Framework version 1.1.4322
Copyright (C) Microsoft Corp 2000-2002. All rights reserved.
Created chatServer.dll
I cant get the problem origin from where it is comming, when i tried to convert it into .dll file it shown an error that, it did not recongnized the method in first class
public static void chatServerReadThread.start() method
is not recognized by .net dos prompt commnad. But when i omit this method it gets created the .dll file. This start method is basically the default method of thread class that run the thread from the same class..
By vewing the code u can visulize the thing,, i ve marked the code from where the error is comming.
Plz do it as soon as possible, i ll waiting for ur reply......
I ll be really thanking u for that....
Thanx and regards
Niraj Kumar Singh

I wonder if this will work:
jbimp /t:exe chatServer.jar
Your chatServer is an application that can be started from the commandline.
A dll is a library to be used in com, com+, other executables or ....

How to convert DOM Tree in XML File

Hi there,
I am successful to build a DOM tree in memory where i am adding elements. Now after all this i want to make a XML file of that DOM representation. Now, i am confused with my code that how to transfer DOM structure to xml file ? A small code is attached herewith ?
doc = db.newDocument();
               doc.normalizeDocument();
               doc.setXmlVersion("1.0");
               doc.createComment("Created By: Sachin Kulkarni");
               Element rn = doc.createElement("RootNode");
               Element n1 = doc.createElement("A1");
               ((Node)n1).setNodeValue("Element A1");
               Element n11 = doc.createElement("A11");
               ((Node)n11).setNodeValue("Element A11");
               Element n12 = doc.createElement("A12");
               ((Node)n12).setNodeValue("Element A12");
               ((Node)n1).appendChild( ((Node)n11) );
               ((Node)n1).appendChild( ((Node)n12) );
               Element n2 = doc.createElement("A2");
               ((Node)n2).setNodeValue("Element A2");
               Element n3 = doc.createElement("A3");
               ((Node)n3).setNodeValue("Element A3");
               ((Node)rn).appendChild( ((Node)n1) );
               ((Node)rn).appendChild( ((Node)n2) );
               ((Node)rn).appendChild( ((Node)n3) );
//creating the xml file
               Source source = new DOMSource((Element) doc.getElementsByTagName("RootNode").item(0));
               StringWriter out = new StringWriter();
               StreamResult result = new StreamResult(out);
               Transformer transformer = TransformerFactory.newInstance().newTransformer();
               transformer.setOutputProperty("encoding", "iso-8859-1");
               transformer.setOutputProperty("indent", "yes");
               //transformer.setOutputProperty("test.xml","1");
               //transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
               transformer.transform(source,result);
               result.getWriter().toString();
==================
Is it any problem with the implementation ? How to use fileoutputstream with this ?

I have done like this:
DocumentBuilderFactory docBuildFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = docBuildFactory.newDocumentBuilder();
Document doc = builder.newDocument();
Element root = (Element)doc.createElement("Root");
doc.appendChild(root);
Element address = (Element)doc.createElement("Address");
address.appendChild((Element)doc.createElement("Street"));
address.appendChild((Element)doc.createElement("PostCode"));
address.appendChild((Element)doc.createElement("Town"));
Element country = (Element)doc.createElement("Country");
country.setAttribute("type","EU");
Text cname = doc.createTextNode("Spain");
country.appendChild(cname);
address.appendChild(country);
root.appendChild(address);
TransformerFactory tranFactory = TransformerFactory.newInstance();
Transformer aTransformer = tranFactory.newTransformer();
aTransformer.setOutputProperty(OutputKeys.INDENT, "yes");
Source src = new DOMSource(doc);
Result dest = new StreamResult(new FileOutputStream(new File("test.xml")));
aTransformer.transform(src, dest);

How to convert a password protected pdf file?

How do I convert a password protected pdf file to Word?

Yup. You all are right. I ordered Adobe Acrobat today and the order is still processing. I can get to Adobe Acrobat.com but that too does not work. I guess I will have to wait until my order is processed before I get the keys to the kingdom. Thanks for your help and please forgive my ignorance.Regards,Bob

How to Convert Binary Data in Binary File

hi,
my telecom client puts a binary file which is asn.1 encoded with BER.
how to handle binary data in java.
how to convert binary to hexa to ascii format
how to convert binary to octet to ascii format
please help me in this.
regards,
s.mohamed asif

You don't need to convert the data.
Only you can do is print it in that formats, like it:
public static String byteArrayToHex(byte[] b) {
    StringBuffer sb = new StringBuffer();
    for (int i = 0; i < b.length; i++)
         sb.append(Integer.toHexString(b&255) + " ");
return sb.toString();
take a look at this
http://java.sun.com/docs/books/tutorial/essential/io/

How to convert Test Executive 4 sequence file to TestStand 3.0 or 3.1?

Similar Messages

Maybe you are looking for