How to convert the value in GET RUN TIME statement in minutes value...

Hello Experts,
As I understand, the value that is being passed from GET RUN TIME FIELD statement
is in microseconds. Now, how do I convert it in minutes value?
Thank you guys and take care!

This will give in Hours , minutes, seconds.
data time type sy-uzeit.
get time field time.
write time.
Check it.

Similar Messages

How to call the Application configuration in run time.

hi guru,
i have created two Application configuraton and it working fine.
my question how to call the application configuration in run time.
Example :
Based on the user i want to change the Application Configuration.like Super user and Normal user.
Advance thank's
Regard's
Vivekanathan.S

Hi,
Please try out this way-
Have a look at this table -
WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
after you are done with the configuration--
Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
Please refer to these links -
different default layouts for different CONFIG_IDs
Get WDCONFIGURATIONID
Regards
Lekha

How to Hide the Parameter field at run time....

Hi,
I have a parameter field which behaves differently depending on the User logged in.
It has the LOV coming from following SQL.
SELECT customer_name FROM Cust_mast;
If the user = 'INTERNAL' then the Where clause will be
WHERE cust_id in('DELL', 'SBC', 'BANK')
Else there will be no WHERE clause or the parameter field
should be hidden in the parameter form.
So my questions are:
1) How to hide the Parameter field during Run time?
OR OR OR
2) How to change the LOV select statement during Run time?
Thanks.
Ram.

Hi Ram,
Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
However, what you want can be done in 2 other ways:
1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
<form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
<select name="selected_customer" onChange="First.submit()" >
<option value="">Choose a Customer Name
<rw:foreach id="G_cust_id" src="G_cust_id">
<rw:getValue id="myCustId" src="CUSTOMER_ID"/>
<rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
<option value="<%=myCustId%>"><%=myCustName%>
</rw:foreach>
</select>
</form>
In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
Navneet.

How to hide the Parameter field during Run time?

Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KK

hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

How to change the view criteria at run time for af:query

Hi,
I've a usecase where I need to change the view criteria of the af:query at run time.
Use case:
=======
1) Consider a check box (Show Emps Under Dept 10) in the query panel when user selects and clicks 'Search' button should show the employees under dept 10. If user searches without selecting the check box, the results should show all the employees in all the departments.
2) I need to have a check box always in the query panel. Its mandatory.
The way I implemented:
==============
1) Created a transient variable 'Show Emps Under Dept 10' in the EmployeeVO and also created a bind variable bind_DeptNo.
2) Create a view criteria 'AllEmployees' which has only the transient attribute as the view criteria item and whose value set to 'false' by default.
3) Created another view criteria 'EmpUnderDept' which has 'DepartmentId' as the view criteria item and whose value set to the bind variable 'bind_DeptNo'.
4) Dropped the view criteria 'EmpUnderDept' as the 'af:query' panel in the jspx page.
5) Overridden the queryListener as '#{EmpBean.empSearch}'
6) Has the below code in the empSearch method as below. When user selects the check box, applying the other criteria 'EmpUnderDept' and setting the bind variable to '10'.
public void empSearch(QueryEvent queryEvent) {
// Add event code here...
QueryDescriptor queryDesc = (QueryDescriptor) queryEvent.getDescriptor();
ConjunctionCriterion conCrit = queryDesc.getConjunctionCriterion();
List<Criterion> criterionList = conCrit.getCriterionList();
List criterionValues = new ArrayList();
Object criteriaValue = null;
int criteriaNo = 0;
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
FacesContext facesContext = FacesContext.getCurrentInstance();
for (Criterion criterion : criterionList) {
AttributeDescriptor attrDescriptor = ((AttributeCriterion)criterion).getAttribute();
System.out.println("============== attrDescriptor.getName() =================== " + attrDescriptor.getName());
criteriaValue = ((AttributeCriterion)criterion).getValues().get(0);
if(criteriaNo==0) {
Boolean val = (Boolean) ((AttributeCriterion)criterion).getValues().get(0);
if (val.equals(true)) {
OperationBinding method = (OperationBinding) ADFUtil.findOperation("ExecuteWithParams");
if(method!=null) {
Map params = method.getParamsMap();
//params.put(key, value)
method.getParamsMap().put("bind_DeptId", 10L);
method.execute();
ADFUtil.invokeMethodExpression( "#{bindings.EmpUnderDeptCriteiaQuery.processQuery}", queryEvent);
} else {
//ADFUtil.invokeEL("#{bindings.ExecuteWithParams.execute}");
ADFUtil.invokeMethodExpression( "#{bindings.AllEmployeesCriteriaQuery.processQuery}", queryEvent);
But this approach is not working and its always showing all the employees in all the departments.
Please let me know if there is a way to change the view criteria at run time depending on the values set at run time for one of the view criteria items.
JDev version am using is '11.1.1.5'
Thanks,
Lakshman

Hi Shay,
It worked for me without overriding the executeQuery() method in the ViewImpl.java.
Instead of creating 2 view criteria, I created only one which has both transient variable and the DepartmentId = <bind_DeptId>. With the above code, it worked properly. Now I am using only one view criteria.
Thank you.

How to load the object library at run time from within the script.

What i am trying to do from my library is that I wanted to load the object library file (.properties) file at run time through the script. I know that open script has a deprecated method "ft.loadObjectLibrary". Is there any other method other than the deprecated one?. Also is there a way that I can unload the library?
Thanks,
Sri

Object.border.fill.color.value = "255,255,255";
if you want to use rawValue of textfields to insert in there you will have to do
Object.border.fill.color.value = R.rawValue + "," + G.rawValue + "," + B.rawValue

When the page will be load how to make the page blank in run time

Dear
when i will run the page the fields shoud come with blank Field.
i want to make it in runtime.
example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come, after thar i will create.

duplicate how to make the page blank field in runtime

How to set the pll path in run time environment

kindly temme the solution for this

I have same question but my version is 6i
I also want to know is this with report too.
My scenario is i make frm folder in other folder with folder with the name of module for pll i make foler at same level at frm with the name of lib how to resolve this

How to convert the character value to currency/numeric

Hi,
See the sample code here
data: v_qtr_field(7).
data: w_low_limit like glt0-kslvt,
      w_amount like glt0-hslvt.
w_low_limit = 02.
w_max_period = 3.
concatenate 'HSL' w_low_limit into v_qtr_field.
*comment
*I am looking for a field formation thru above code like in GLT0 table like HSL02,HSL03 *etc based on the value user entered in the selection *screen
DO w_max_period TIMES
VARYING w_amount FROM v_qtr_field NEXT v_qtr_field + 1.
   t_trans_values-dmbe2 = t_trans_values-dmbe2 + w_amount.
ENDDO.
I am facing problem in the Do loop as it wont allows multiple data types. can you suggest me how to convert the v_qtr_field whose data type is character to currency?

Hi,
Please check this code .
PERFORM write_currency
              USING buf_anla-urwrt t_dates-waers t_txw_anla-urwrt.
*       FORM WRITE_CURRENCY                                           *
*       convert currency amount to string                             *
*       - use decimal point                                           *
*       - remove separator characters                                 *
* --> P_AMOUNT                                                      *
* --> P_CURRENCY_UNIT                                               *
* --> P_STRING                                                      *
FORM WRITE_CURRENCY
     USING P_AMOUNT        TYPE P
           P_CURRENCY_UNIT LIKE TCURC-WAERS
           P_STRING        TYPE C.
DATA: DEC2POINT(2) TYPE C VALUE ',.'.
* convert separator to decimal point
WRITE P_AMOUNT TO P_STRING CURRENCY P_CURRENCY_UNIT
        NO-GROUPING
        NO-SIGN
        LEFT-JUSTIFIED.
TRANSLATE P_STRING USING DEC2POINT.
* put minus sign before number
IF p_amount < 0.
    SHIFT P_STRING RIGHT.
    P_STRING(1) = '-'.
ENDIF.
ENDFORM.
<i>Hope This Info Helps YOU.</i>
Regards,
Lakshmi

How to convert the Report Builder output to .xls

Dear All,
Let me please know how to convert the Report Builder output to Excel Format.
As there are having the facility to convert the output in .PDF or .HTML format but i want to convert that into Excel Sheet......
Please Guide me in this regards
Thanks in advance
Regards,
Vishal......

Hello,
If your question is about the format spreadsheet, it is not possible from Reports Builder :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/output/output_a_simpleexcel.htm
Restrictions
It is not possible to generate spreadsheet output directly from Reports Builder. Instead, on the command line, you can run the report using rwrun or Reports Server clients (rwservlet, rwclient, rwcgi), with DESFORMAT=SPREADSHEET. You cannot store DESFORMAT=SPREADSHEET as a system parameter value in the report definition (.rdf file).
Regards

How to convert the class in the one package to same class in the other pack

How to convert the class in the one package to same class in the other package
example:
BeanDTO.java
package cho3.hello.bean;
public class BeanDTO {
private String name;
private int age;
* @return
public int getAge() {
     return age;
* @return
public String getName() {
     return name;
* @param i
public void setAge(int i) {
     age = i;
* @param string
public void setName(String string) {
     name = string;
BeanDTO.java in other package
package ch03.hello;
public class BeanDTO {
private String name;
private int age;
* @return
public int getAge() {
     return age;
* @return
public String getName() {
     return name;
* @param i
public void setAge(int i) {
     age = i;
* @param string
public void setName(String string) {
     name = string;
My converter lass lokks like
public class BeanUtilTest {
     public static void main(String[] args) {
          try
               ch03.hello.BeanDTO bean=new ch03.hello.BeanDTO();
          bean.setAge(10);
          bean.setName("mahesh");
          cho3.hello.bean.BeanDTO beanDto=new cho3.hello.bean.BeanDTO();
          ClassConverter classconv=new ClassConverter();
          //classconv.
          System.out.println("hi "+beanDto.getClass().toString());
          System.out.println("hi helli "+bean.toString()+" "+bean.getAge()+" "+bean.getName()+" "+bean.getClass());
          Object b=classconv.convert(beanDto.getClass(),(Object)bean);
          System.out.println(b.toString());
          beanDto= (cho3.hello.bean.BeanDTO)b;
          System.out.println(" "+beanDto.getAge()+" "+beanDto.getName() );
          }catch(Exception e)
               e.printStackTrace();
But its giving class cast exception. Please help on this..

Do you mean "two different layers" as in separate JVMs or "two different layers" as in functional areas running within the same JVM.
In either case, if the first class is actually semantically and functionally the same as the second (and they are always intended to be the same) then import and and use the first class in place of the second. That's beyond any question of how to get the data of the first into the second if and when you need to.
Once you make the breakthrough and use one class instead of two I'd guess that almost solves your problem. But if you want to describe your architecture a little that would help others pin down want you're trying to do.

How to find the SQL Server Instances running across the given activer directory domain?

How to find the SQL Server Instances running across the given activer directory domain?
I have though of OSQL -L , Microsoft Assessment and Planning ( MAP ) tool and SQLPing3 (SQLSecurity) might help me.
I would appreciate if there any other way of finding the SQL Servers / Instances running across the given active directory domain.
Sivaprasad S
http://sivasql.blogspot.com
Please click the Mark as Answer button if a post solves your problem!

Dear ,
Very simple u find all instances through the customized sp which is get all details about inventory. Like i put the sp bellow. This is without any tool.
USE [master]
GO
/****** Object: StoredProcedure [dbo].[DBStatus] Script Date: 08-01-2015 19:46:11 By Damodar Patle Sr. DBA Mumbai India ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[DBStatus]
AS
SELECT
SERVERPROPERTY('servername') AS ServerName,
ConnectionProperty('local_net_address') AS 'local_net_address',
ConnectionProperty('local_tcp_port') AS 'local_tcp_port',
CONVERT(VARCHAR(25), @@VERSION) as VERSIONSQL,
SERVERPROPERTY('ErrorLogFileName') AS ErrorLogFilePath,
database_id,
CONVERT(VARCHAR(25), DB.name) AS DBName,
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'status')) AS [Status],
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'Recovery')) AS [Recovery_Model],
create_date as DBCreate_Date, --physical_device_name,
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS DataFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS [Data MB],
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LogFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS [Log MB],
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS MDF_File_Location,
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LDF_File_Location,
user_access_desc
FROM sys.databases DB
ORDER BY dbName, [Log MB] DESC, NAME

How to convert the javasource file(*.class) to execute file(*.exe)?

How to convert the javasource file(*.class) to execute file(*.exe)?
thank you!

Although i have seen a few programs (that are platform specific) that will embed a small jvm into an exe with your class file, it is generally excepted that you cannot create an executable file using java. The JAR executable file is probably the closest your going to get
Pete

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank you

So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

How to convert the counter input as a RPM

Hello NI,
Could you tell me. how to convert the Counter input to the RPM. I am using Rotary encoder has a 5V amplitude with 500 PPR. i am going to measure the Engine speed as a rpm.
I am using third party hardware, from the hardware i can get the Count as well as Frequency also.
Could you suggest to me...? i looked out some disscussion in these forum but i cant able to understand.
can you please explain with simple way....
if you have any simulation send me....
Regards,
Balaji DP

Hi balaji,
[email protected] wrote:
...I am using third party hardware, from the hardware i can get the Count as well as Frequency also.
If you're able to read frequency as X pulses/sec(?) that seems to convert RPM as follows:
X (pulse/sec) * 1/500 (rev/pulse) * 60 (sec/min) = X * 60/500 RPM (???)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

How to convert the value in GET RUN TIME statement in minutes value...

Similar Messages

Maybe you are looking for