How to convert unstructured document into structured document
I have many unstructured documents. Is it possible to convert these documents into strcutured documents? I know that structured FM uses DITA which is different from unstrcutured document. This is client's requirement so I want to get community views on this.
Yanesh,
I would approach this in 2 stages.
Understand how DITA works independently of FrameMaker first. I say this because DITA is not a straight forward 'out of the box' experience. This could be a good starting point -http://www.technicalcommunicationcenter.com/2011/04/13/technical-book-review-practical-dit a-a-nuts-and-bolts-guide-to-structured-technical-writing/
Understand how FrameMaker works with DITA. FrameMaker has it's own way of how you author DITA based content. You might want to look at tools such as DITA FMx - http://www.leximation.com/dita-fmx/, which claims to make DITA authoring easier with FrameMaker.
If you are initially just producing PDF from your DITA content, then FrameMaker is probably the best way of getting the results you want, as FrameMaker templates work the same with structured content, as they do with unstructured.
Good luck
Mark
Similar Messages
-
I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.
Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra -
How to convert jpeg files into word
How to convert jpeg files into Word
Hi Eugene,
I don't think you can convert an image to a Word document, but you could place the JPEG into a Word document using the Insert > Object command in Word.
For other questions relating to Word, you will probably have more luck getting an answer if you post on the Microsoft forums (we can help if you're using Acrobat, or another Adobe product, but you'll find the Word experts on the Microsoft forums.)
Best,
Sara -
How to convert a optionset into multi selection picklist in crm 2011 using javasacript??
hi,
where user want to select not only one but multiple value
from a pick list. I tried examples but it shows some errors.
How to do it??Hey I meet a problème on my development see my result :
link : https://social.microsoft.com/Forums/getfile/652331
a multiple select list on my crm 2013 I do this process on this forum :
link : https://social.microsoft.com/Forums/en-US/2db47a59-165d-40c9-b995-6b3262b949eb/how-to-convert-a-optionset-into-multi-selection-picklist-in-crm-2011-using-javasacript?forum=crmdevelopment
my development :
// var_sc_optionset >> Provide schema-name for Option Set field
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// OSV >> Provide text field object which will store the multi selected values for Option Set
//Method to convert an optionset to multi select Option Set
function ConvertToMultiSelect(var_sc_optionset, var_sc_optionsetvalue, OS, OSV)
if( OS != null && OSV != null )
OS.style.display = "none";
Xrm.Page.getControl(var_sc_optionsetvalue).setVisible(false);
// Create a DIV container
// var addDiv = document.createElement("<div style='overflow-y:auto; color:#000000; height:160px; border:1px #6699cc solid; background-color:#ffffff;' />");
var addDiv = document.createElement("div");
addDiv.style.overflowY = "auto";
addDiv.style.height = "160px";
addDiv.style.border = "1px #6699cc solid";
addDiv.style.background = "#ffffff";
addDiv.style.color = "#000000";
OS.parentNode.appendChild(addDiv);
// Initialise checkbox controls
for( var i = 1; i < OS.options.length; i++ )
var pOption = OS.options[i];
if( !IsChecked( pOption.text , OS, OSV) ){
// var addInput = document.createElement("<input type='checkbox' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("style","border:none; width:25px; align:left;");
else {
// var addInput = document.createElement("<input type='checkbox' checked='checked' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("checked","checked");
addInput.setAttribute("style","border:none; width:25px; align:left;");
// var addLabel = document.createElement( "<label />");
var addLabel = document.createElement( "label");
addLabel.innerText = pOption.text;
// var addBr = document.createElement( "<br />"); //it's a 'br' flag
var addBr = document.createElement( "br"); //it's a 'br' flag
OS.nextSibling.appendChild(addInput);
OS.nextSibling.appendChild(addLabel);
OS.nextSibling.appendChild(addBr);
///////Supported functions
// Check if it is selected
function IsChecked( pText , OS, OSV)
if(OSV.value != "")
var OSVT = OSV.value.split(";");
for( var i = 0; i < OSVT.length; i++ )
if( OSVT[i] == pText )
return true;
return false;
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// Save the selected text, this field can also be used in Advanced Find
function OnSave(OS, var_sc_optionsetvalue)
var getInput = OS.nextSibling.getElementsByTagName("input");
var result = '';
for( var i = 0; i < getInput.length; i++ )
if( getInput[i].checked)
result += getInput[i].nextSibling.innerText + ";";
//save value
control = Xrm.Page.getControl(var_sc_optionsetvalue);
attribute = control.getAttribute();
attribute.setValue(result);
I have to do 2 field one is option list field and the second is textfield,
option list field : new_books
textfiled : new_picklistvalue
my js is on onload event see :
link : https://social.microsoft.com/Forums/getfile/652333
thanks you for you'r help -
How to convert database table into xml file
Hi.
How to convert database table into XML file in Oracle HTML DB.
Please let me know.
Thanks.This not really a specific APEX question... but I search the database forum and found this thread which I think will help
Exporting Oracle table to XML
If it does not I suggest looking at the database forum or have a look at this document on using the XML toolkit
http://download-east.oracle.com/docs/html/B12146_01/c_xml.htm
Hope this helps
Chris -
How to convert table content into html format?
Hi,
Experts,
How to convert internal data into HTML format is there any function module or piece of code to download content into HTML.
Thank u,
Shabeer Ahmed.Then use this code....
REPORT ytest_table_html1.
* D A T A D E C L A R A T I O N
*-HTML Table
DATA:
t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
" Html Table
*- Declare Internal table and Fieldcatalog
it_flight TYPE STANDARD TABLE OF sflight WITH HEADER LINE,
" Flights Details
it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
" Fieldcatalog
*-Variables
DATA:
v_lines TYPE i,
v_field(40).
*-Fieldsymbols
FIELD-SYMBOLS: <fs> TYPE ANY.
* S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
SELECT *
FROM sflight
INTO TABLE it_flight
UP TO 20 ROWS.
* E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*-Fill the Column headings and Properties
* Field catalog is used to populate the Headings and Values of
* The table cells dynamically
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = it_fcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
DELETE it_fcat WHERE fieldname = 'MANDT'.
t_html-line = '<html>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<td><h1>Flights Details</h1></td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<table border = "1">'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate HTML columns from Filedcatalog
LOOP AT it_fcat.
CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
it_fcat-scrtext_l
'</th>' INTO t_html-line.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
DESCRIBE TABLE it_fcat LINES v_lines.
*-Populate HTML table from Internal table data
LOOP AT it_flight.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate entire row of HTML table Dynamically
*-With the Help of Fieldcatalog.
DO v_lines TIMES.
READ TABLE it_fcat INDEX sy-index.
CONCATENATE 'IT_FLIGHT-' it_fcat-fieldname INTO v_field.
ASSIGN (v_field) TO <fs>.
t_html-line = '<td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = <fs>.
APPEND t_html.
CLEAR t_html.
t_html-line = '</td>'.
APPEND t_html.
CLEAR t_html.
CLEAR v_field.
UNASSIGN <fs>.
ENDDO.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</table>'.
APPEND t_html.
CLEAR t_html.
*-Download the HTML into frontend
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\Flights.htm'
TABLES
data_tab = t_html
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-Display the HTML file
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
document = 'C:\Flights.htm'
operation = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
synchronous_failed = 8
not_supported_by_gui = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
none of the above function modules r obsolete... -
How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie
How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie - simple answers please - Thanks in advance.
@Pipeline2007 - which version of Microsoft Office have you got? Older versions of Acrobat aren't compatible with the latest versions of Office, see this link for info:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html -
How to convert Date format into day in ssrs reports?
Hi
How to convert date format into day?
10/01/2010 as like Monday like that?=weekdayname(datepart("w",Fields!mydate.Value))
-Vaibhav Chaudhari -
How to convert Doc file into image
hello frnds
Can any body guide me how to convert doc file into image and show into swf loader.
actually i have to convert doc files into swf files in runtime so that i have to use this flow.
is it possible to convert doc file into byte array and than convert into image.
Thanks And Regards
Vineet OshoYou can convert any DisplayObject to byeArray using this function ImageSnapshot.captureBitmapData().getPixels()
-
How to convert system Date into DD-MMM-YYYY Format
hi friends,
please help me How to convert system Date into DD-MMM-YYYY Format.
Regards
YogeshHI..
data: w_dt(11) type c,
w_month(2),
w_mon(3).
w_month = p_date+4(2). **p_date = given date**
case w_month.
when '01'.
w_mon = 'Jan'.
when '02'.
w_mon = 'Feb'.
when '03'.
w_mon = 'Mar'.
when '04'.
w_mon = 'Apr'.
when '05'.
w_mon = 'May'.
when '06'.
w_mon = 'Jun'.
when '07'.
w_mon = 'Jul'.
when '08'.
w_mon = 'Aug'.
when '09'.
w_mon = 'Sep'.
when '10'.
w_mon = 'Oct'.
when '11'.
w_mon = 'Nov'.
when '12'.
w_mon = 'Dec'.
endcase.
Now...
concatenate p_date6(2) '-' w_mon '-' p_date0(4) into w_dt.
write w_dt. -
Hi..
I am currently working on Internationalization. I have created property files for the textual content and using PropertyResourceBundles. Now I want to use ListResourceBundles. So what I want to know is..
How to convert Property files into Java Objects.. I think Orielly(in their book on Internationalization) has given an utitlity for doing this. But I did not get a chance to look into that. If anyone has come across this same issue, can you please help me and send the code sample on how to do this..
TIA,
CKHi Mlk...
Thanks for all your help and suggestions. I am currently working on a Utility Class that has to convert a properties file into an Object[][].
This will be used in ListResourceBundle.
wtfamidoing<i>[0] = currentKey ;
wtfamidoing<i>[1] = currentValue ;I am getting a compilation error at these lines..(Syntax error)
If you can help me.. I really appreciate that..
TIA,
CK -
How to convert HL7 file into an XML
Hi All,
I am new to HL7,can any one tell how to convert HL7 file into an XML.Give sample demo or related links.
My sample HL7 file is as follows how can I convert.
FHS|^~\&||Tax ID123^Lab Name123^L|||201110191435||HL7.txt||1234567|123||
PID|seqno|123||john^chambers^^Dr^Dr|2456 california ave^San jose^CA^85254|19601212|M
FHS|^~\&||Tax ID123^Lab Name123^L|||File Creaqted Date|File Security|FileName||File HeaderComment||Facility|FileCreatedDateTime|File Security|File Name|File Header Comment|FileControlId|Reference File Control ID|
PID|seqno|patientId||LastName^FirstName^MiddleName^Title^Degree|Street^City^State^zip|patientDOB|gender
<Report>
<FileHeader>
<FileSendingApplication> </FileSendingApplication>
<TaxID>Tax ID123</TaxID>
<LabName>Lab Name123</LabName>
<FileSendngFacilityType>L</FileSendngFacilityType>
<FileReceivingApplication></FileReceivingApplication>
<FileReceivingFacility></FileReceivingFacility>
<FileCreatedDateTime>201110191435</FileCreatedDateTime>
<FileSecurity></FileSecurity>
<FileName>HL7.txt</FileName>
<FileHeaderComment></FileHeaderComment>
<FileControlId>1234567</FileControlId>
<ReferenceFileControlID></ReferenceFileControlID>
<FileHeader>
<Patient>
<seqno> </seqno>
<patientId>Tax ID123</patientId>
<LastName>Lab Name123</LastName>
<FirstName>L</FirstName>
<MiddleName></MiddleName>
<Title> </Title>
<Degree></Degree>
<Street></Street>
<City></City>
<State>HL7.txt</State>
<Zip></Zip>
<patientDOB>1234567</patientDOB>
<gender></gender>
<Patient>
</Report>
Thanks
ManiHi Prabu,
With input as in single line I'm able to get the the output but with the multiple lines of input,error was occured.Any suggestions.
Error while translating. Translation exception. Error occured while translating content from file C:\temp\sampleHL7.txt Please make sure that the file content conforms to the schema. Make necessary changes to the file content or the schema.
The payload details for this rejected message can be retrieved. Show payload...
Thanks
Mani -
HT204382 How to convert VOB files into MP4 ? Tks
Hi, anyone knows how to convert VOB files into MP4 ones ?
Tkshttp://forums.macrumors.com/showthread.php?t=812985
The procedure is dated and I will assume that the DVD is not copy-protected since discussion of such things is verboten. -
How to convert select-options into parameters
hi Abapers,
i have an urgent requirement, iwant to know how to convert select-options into parameters
on selection screen,is it possible to do.TABLES: spfli.
SELECTION-SCREEN BEGIN OF BLOCK test.
SELECT-OPTIONS:
s_carrid FOR spfli-carrid NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK test.
Greetings,
Blag. -
How to convert DataServices.Result into an Arraylist or ArrayCollection?
I want to use an ArrayCollection or an ArrayList as a data provider
for a dataGrid, and then later in a Graph.
The problem is that the starting point is the FLEX Builder 4 created "datasource.lastResult" value Objects.
I don't know how to access anything but the Column names.
The fields returned are:
gmtdate,hostname,CPUBusy
I want to show CPU busy for "N" number of hosts.
So I need to change my result from the SQL query in Action Script into:
gmtdate, hostname1_CPUbusy, hostname2_CPUbusy, hostnameN_CPUbusy
Are there any samples of how to convert the .lastResult into an ArrayList?
The result set is Object based and I can't figure out how to read it.
Thanks,
DavidI wish I could change it, but Oracle SQL does not allow for an unknown number of hosts.
Nor does this version of Oracle have the new pivot function.
David
Maybe you are looking for
-
Not able to connect Oracle DBXE from sql*plus client
Hi, I have installed Oracle 10gXE from oracle site. i have updated the tnsnames.ora also but when i try to connect the db through sql*plus client, i am redirected to .net debugger. Pls help me in this, Thanks in advance. -- Raja
-
How to set an object in request scope in a jsp uysing jstl
I usally use scriptlet in jsp to set an object in request is there a way to do this using jstl instead of this <%request.setAttribute("test",myObject);%> I want to use tag ?
-
If statment with jstl (or struts:logic)
Guys, I have the following info in my scope: request.getAttribute("grade") the value is between 0 and 100; I would like to output a message to the user as follow: //pseudocode if (grade>90) output: excellent else output:poorI'm trying to use eith
-
Ops: Plug-in Failure, why?
An Upgrade notice popped up on my screen to install the new version of Adobe Flash Player. So I went for the upgrade, as I always do. "Big Screw up" as soon as the download Completed as well as the installation finished, I re-booted my computer, t
-
Cannot sync my iphone 4s to my itunes on my mac mini.
I have an old mac mini which already has itunes installed given to me for christmas, however when I tried to connect my iphone4s it said I needed an itunes update. I tried installing the update but it wont work. I download the file then it does not r