How to convert VCR Tape to DVD on MACbook Pro?

Any insight into how to convert VCR tapes to DVD on Macbook Pro would be much appreciated!

The first question is: how to get video into your Mac?
My answer is: use a DV camcorder as a translator. Most Canons and Sonys do this. Here are some general steps:
1. connect the video and audio outputs of your VCR to the input jacks of the camcorder. (If the video is on an S-video jack instead of the conventional yellow phono jack, it will be a little bit better quality.)
2. Using your camcorder's menu, set it to "AV IN->DV OUT". This will vary according to the model of your DVCAM. One hint: all camcorders have a 3-position camera/off/play(vcr) switch. In this application, most of them use the PLAY position.
3. Connect the DV out of the camcorder to a firewire port on the Mac. This requires the cable that comes with the camera...it's a mini-firewire on one end, and a regular firewire 400 on the other. (If your Mac has only a FW 800 jack, you may need another adapter.)
4. Turn on the DVCAM. Usually, iMovie will automatically open and be ready to record...if not, start it.
5. Hit PLAY on the VHS machine. You should see the video in the iMovie window. When you see what you want to save, press iMovie's button to start recording. You're free to edit the movie in any way you want.
When you have enough for a DVD, save it and use iDVD to burn a disc.
Alternatively, if you want to save a step, you can skip the iMovie step and just open up iDVD and select the feature...I forget the exact name...but it's like "Quick Movie" that will just save it as one stream.

Similar Messages

How to convert movie file into dvd on macbook pro

what is the best format to convert dvds into for use in most dvd players?

With a Image Editing program like Photoshop.
And please Release the Caps Lock key.
Thanks

How to convert VCR tapes to computer

How to convert VCR and 8mm tapes to computer

The first question is: how to get video into your Mac?
My answer is: use a DV camcorder as a translator. Most Canons and Sonys do this. Here are some general steps:
1. connect the video and audio outputs of your VCR to the input jacks of the camcorder. (If the video is on an S-video jack instead of the conventional yellow phono jack, it will be a little bit better quality.)
2. Using your camcorder's menu, set it to "AV IN->DV OUT". This will vary according to the model of your DVCAM. One hint: all camcorders have a 3-position camera/off/play(vcr) switch. In this application, most of them use the PLAY position.
3. Connect the DV out of the camcorder to a firewire port on the Mac. This requires the cable that comes with the camera...it's a mini-firewire on one end, and a regular firewire 400 on the other. (If your Mac has only a FW 800 jack, you may need another adapter.)
4. Turn on the DVCAM. Usually, iMovie will automatically open and be ready to record...if not, start it.
5. Hit PLAY on the VHS machine. You should see the video in the iMovie window. When you see what you want to save, press iMovie's button to start recording. You're free to edit the movie in any way you want.
When you have enough for a DVD, save it and use iDVD to burn a disc.
Alternatively, if you want to save a step, you can skip the iMovie step and just open up iDVD and select the feature...I forget the exact name...but it's like "Quick Movie" that will just save it as one stream.

I recorded VCR tape onto DVD-R but will not play on my MacBook Pro. I have already recorded multiple DVDs. How can I get it to play on my Mac?

I recorded VCR tape onto DVD-R but will not play on my MacBook Pro. I have already recorded multiple DVDs. How can I get it to play on my Mac?

"I recorded VCR tape onto DVD-R"
How? Using what equipment/software?
"The DVD plays on the device on which it was recorded."
Just a guess: You're using a VCR-DVD combo recorder. DVDs produced in this way will play on the device that made them, but won't play on anything else until they're "finalized." In fact, Macs will recognize unfinalized DVDs as blank discs until the discs are finalized. Check the manual that came with the recording device for instructions.

How can I convert MiniDV tapes to DVD? I've use a Canon GL 2 and an iMac about 1 year old. I'm trying to use iMovie and I've installed the latest drivers.

How can I convert MiniDV tapes to DVD? I've use a Canon GL 2 and an iMac about 1 year old. I'm trying to use iMovie and I've installed the latest drivers.

MiniDV was a great format, one I still use often. I also still use iMovie HD6 to process it and, for all the iterations of iMovie that followed it, I still believe it was one of Apple's greatest movie software programmes, next to Final Cut Pro, using a timeline method of editing. That was also in the day which Apple put Superdrives into their computers, so that you could not only make your movie in iMovie, but you could render it to iDVD and then burn the DVD. Now you need to buy an external burner.
Since iMovie HD6 and iDVD 6 were "universal" software, it has continued to work through the many OS releases since it came out with Tiger, I believe it was. So, it may still work with Mavericks too and, if you could locate a copy of iLife 06, probably used, you might enjoy the difference that HD6 has over all iMovie releases since then.
Not saying you can't process your MiniDV with current iMovie versions, but I'm not the one to speak about that.

How do I convert or send data from a MacBook Pro to an s-video device???

How do I convert or send data from a MacBook Pro to an s-video device??

Use a Mini-Displayport-to-VGA adapter and a conversion box like this:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2
MBP

How to convert My trial version of Acrobat X pro into permanent(how to buy licence for it ))

hi, i downloaded a trail version of acrobat x pro on 3rd may 2011...........i want to convert it to permanent version.....how to do it.
How to convert My trial version of Acrobat X pro into permanent(how to buy licence for it )
someone please help

You need to purchase a license. You can do that on the Acrobat X Pro product page at http://www.adobe.com/products/acrobatpro.html

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

If all else fails, try this. i used to do it all the time before. might or might not work with the new office.
if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
insert the thumb drive in your MB and do the install from there.
However, if you have the newer version of MS Office, Bandit's suggestion is much better.

How do I cut and past on my macbook pro?

How do I cut and past on my MACBOOK PRO?

You can use the hotkeys, as Steve said. It sort of sounds as if you can't right click though.
If you're using the touchpad, go into system preferences>trackpad, enable "secondary click, tap with 2 fingers". Then, when you click/tap the touchpad with 2 fingers instead of one, it'll right click, giving you the option to copy/paste whatever you highlighted.

Mobile me can not be dragged to the trash to be deleted because I can not see it at the bottom. So how do I get mobile me off my macBook Pro?

Mobile me email account me can not be dragged to the trash to be deleted because I can not see it at the bottom. So how do I get mobile me off my macBook Pro?

You have to use get a 3rd party video converter like WinAvi.
Google video->ipod converters, and you will get a list.

How to transfer movies to ipad 3 from macbook pro

how to transfer movies to ipad 3 from macbook pro?

Transfer movies from Macbook Pro to iPad.
http://www.dvd-to-iphone4.com/resources/transfer-videos-from-mac-to-ipad.html

How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

Yes, you can and should. The DVD belong with the MBP. You should use the original DVD to erase the disk and install Snow Leopard prior to sale.
You can't sell it with Lion because it is authorized under your user ID.
Allan

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How do I build a family tree on macbook pro

Any suggestions/recommendations on how to build a family tree on my MacBook Pro? Should I use Numbers or Pages? I am used to using Window based programs. Not interested in paying $100 for a template.
I am starting with my grandparents, then their 8 children (my aunts and uncles), then my generation (cousins), then our children, and 1 more generation. Would like to add birth/death/married dates, and possiblly geographical info.
I appreciate your help and time - thank you.

Best of all would be an application designed for the purpose, such as (for example) MacFamilyTree, but you can make a mock family tree using cells in Excel or Numbers.

How to convert VCR Tape to DVD on MACbook Pro?

Similar Messages

Maybe you are looking for