How to convert vi´s writen in version 5.1 to version 6.1, is there a converter that could be downloaded?

I have the problem that we got a upgrade of Labview 5.1 to 6.1. Now the vi´s writen in the old version could not be loaded into the new one. Is there anywhere a converter that coul upgrade the old vi´s so that they could be run in Labview 6.1.

LabVIEW 6.1 will convert 5.1 VIs with no problem usually. What kind of message do you get when you try to open the old VIs? Cannot it not find some subVIs, are some of the VIs saved without a diagram, or are there CINs/DLLs missing? It would also help if you attached a VI (along with all subVIs) that you can't convert.

Similar Messages

HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

Ok no one has been able to help me so far this is it. I NEVER had these problems with photoshop CS6 extended edition!
The best i can do to describe the dissappearing filters( from iteratrions of Photoshop CC for the last year to now) and pattern overlays were called marble, stones and concretes. where can aI find a list of pattern overlays?
will it do any good to repost to all on this forum?

Does anyone know how to convert iTunes TV subscription downloads to files that I can put on a backup drive and watch on my TV vs. MacBook?

I purchased a TV series from iTunes and downloaded the HD version. I then copied it to a backup drive so I could plug it in to my DVD player to watch. This would not work. Does anyone know how to convert the files so they are watchable on TV rather than on my MacBook?

Video in the new iOS is under the application Videos. You should be able to find things there.

How do I delete a rental movie that could not download

How do I delete a rental move that could not be downloaded

Have you tried swiping across the progress bar and see of a delete button comes up that way?
Or try Settings>General>Usage>Storage>Videos. If the movie appears in the setting, try the edit button in the upper right corner.
You can also try resetting the iPad and then see if you can delete the download.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My ipad new was hang, theres an aplication that cannot be downloaded how to resolve it?

How can I resolve my hang ipad3 there's an aplication that cannot be downloaded?

Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... Download the App to your computer and then Sync your iPad...

I can't replace an old version of Firefox with a new one that I just downloaded. It says I don't have permissions to do so, and the old version can't trashed.

I've downloaded the new version, and when I go to drag the Firefox icon into the Applications folder, I'm prompted to replace the old version. When I do, it says, "The operation can’t be completed because you don’t have permission to modify 'Firefox'." I've looked everywhere, and every help forum says to just drag Firefox into the Trash. I've tried that, and it says that Firefox can't be trashed. I don't know if this means anything or not, but there is a small lock in the bottom left of the Firefox icon in my dock.

Try to drag the current Firefox application to the trash if you can't replace it.

How is one supposed to Fix Firefox when the computer does not open the new edition of Firefox that you just downloaded? Am I the ONLY one to ever have had thi

I run win7 64x pro. This is a restatment of problem I posted yesterday I have a hard time believing I'm the first to ever have this problem which is as follows: I used CC Cleaner because of FunMoods, which is the onlt thing I have found that removes that virus thoroughly
Having done that-Face book and a few other sites came up as hyperlinks only with no illustrations, So- I deleted Firefox completely and downloaded a new copy. It downloads but won't open. I used an old copy-13.0 & same thing-does not open.
I have used Firefox for Win since it came out.. My rule of logic with computers is that when I have some problem I cannot solve myself- I CANNOT be the first person to have had that problem yet I see no answers. I would appreciate some help. Thank you.

I am the same one who posted that question though the problem is exactly as described.. I watch the progress bar unpack the download and then it gives me the choice-run with previous settings or as administrator using a password.
Either way-I do not get a new browser. I do get a screen saying that my previous settings may be partially lost. I think a month ago I had also used CC cleaner. At that time-right clicking worked. Now it does not matter. Clicking on the Mozilla download gives me the progress bar but NO unpacked browser.

How to convert Fla or SWF file in to 70 mm theatricla movie.(cinema)

this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
Manoj

Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.

How to convert Fla or SWF file in to 70 MM movie(cinema)

this is Manoj.from Hyderabad. i attended for adobe seminar in
Hyderabad. i have doubt regarding how to convert flash movie or swf
file to 70 mm cinema. is it possible to make 2d animation as cinema
using with flash.?? is it possible?? if possible then please tell
me the process. and which is the best software for making 2d
animation. i am very much comfortable in 2d animation using with
flash software. can you tell me flash is suitable for 2d animation
or not. if we make entire animation in flash then how to convert
that animation in to cinema 70 mm theater. is it possible or not
can you please tell me .
if not possible then please suggest me which software is the
best for making 2d animation for cinema.
please give me reply.
i am waiting for your reply. please give me reply all to
bellow ids too.
[email protected]
[email protected]
[email protected]
thanx and regards
Manoj

Print the reviewer the original document the course content
was initially built from if they want it in print format. To expect
a flash SWF to print the same way as a Microsoft Word document way
is just stupid, think of the SWF's timeline and number of
movieclips (and movieclips within movieclips) and how much
information can be contained within it and how it might not always
be in a linear format (eg. like a Word Doc) = your answer which is
Flash is designed for online delivery of rich media content, where
Microsoft Word is designed for printing.

I don't like Firefox 4.0 and want to go back to the last version.. how do i get rid of this version?

the other version let me access my email on the homepage now i have to go to bookmarks...how do i get rid of this version???!!!

That sounds like the difference between the new Firefox home page '''about:home''' and the previous Google Search page which has '''GMail''' at the top if you used GMail.
You can change your home page so that it points to what you had before, which It would be something like:
* http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Note on Google pages
* They won't show GMail at the top until you have gone to GMail
Directions to '''reset your home page''':
* http://support.mozilla.com/en-US/kb/How to set the home page
More on Search and on Keyword Shortcuts
* [http://dmcritchie.mvps.org/firefox/search.htm Search and Substitution Shortcuts especially for Firefox users]
* [http://dmcritchie.mvps.org/firefox/kws.htm Firefox Keyword Shortcuts]
But I don't really understand why you or anyone else would want to use such a page for a home page, it is redundant. You have as many search engines as you want in the search bar, the default search is Google.
You can invoke '''GMail''', any search, any bookmark, any bookmarklet with a [http://dmcritchie.mvps.org/firefox/kws.htm keyword shortcut] .
'''You're not stuck with how the toolbars have been changed''' in Firefox 4.0, '''this is Firefox''', you can '''customize''' it. That is why Firefox became so popular, you can customize it how you want it with Customize Toolbars, Extensions, Themes, Styles.
You can make '''Firefox 4.0.1''' look like '''Firefox 3.6.17''', see numbered items '''1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

How to convert substring to waveform

hi,
i have a input file with lots of numbers which need to be convert to waveform. i have use the match pattern vi to extract the data which i need to be plot out. those data can be seen from 'before substring' but i do not know how to convert that data to waveform. Can anyone help? i have attached the input file and the the vi as well. thanks
Solved!
Go to Solution.
Attachments:
Untitled 2.vi ‏13 KB

Try using Read from Spreadsheet File.vi. It will convert a tab-delimited text file into an array of numbers in one step.
Lynn

How to convert Comparable to Generics

Hi,
There is a universal comperator.
It is used e.g. in a generic solution for sorting a JTableField.
If the first argument implements the Comparable interface
that implementation should be used.
If not the string representaion of the two arguments should be compared.
new Comparator() {
public compare( Object o1, Object o2 ) {
if( o1 implements Comparable ) {
return ((Comparable) o1).compareTo( o2 );
return o1.toString().compareTo( o2.toString() );
public boolean equals( Object o ) {
return this == o;
If I compile it with Java 5 there are warnings (unchecked/unsafe calls).
I don't know how to convert that code to use Generics,
so that there are no compiler warnings.
Because that comparator should compare all kinds of objects,
the code must be similiar to:
new Comparator<Object>() {
public compare( Object o1, Object o2 ) {
if( o1 implements Comparable<Type of o2> ) {
return ((Comparable<Type of o2>) o1).compareTo( (<Type of o2>) o2 );
return o1.toString().compareTo( o2.toString() );
public boolean equals( Object o ) {
return this == o;
I know, the compiler does not accept this code.
What is the right syntax?
Jens

As of August 2012, visitors to MobileMe.com are no longer given the option to convert their accounts to iCloud or to retrieve old photos and files, with Apple now simply pointing users to iCloud.
http://www.macrumors.com/2012/08/01/apple-officially-ends-mobileme-transition-an d-shuts-down-iwork-com/
And this discussion from February 2012:
https://discussions.apple.com/message/17687380#17687380
ENTERING iCLOUD MAIL SERVER SETTINGS IN SNOW LEOPARD OR LEOPARD
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html

HT201364 How Do i OS X Mavericks on Version 10.6.8?

How Do i OS X Mavericks on Version 10.6.8?

First, do the following, then download it for free from the App Store onto your computer.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Before you click on the Install button you might wish to do this, although it is not an installation requirement:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Question: How to convert dvd to mp4

I have tried multiple products at this point to convert files and I'm tired of spending money. Most recent download is the Xilsoft Converter.
I guess I just thought I would have one file when all the conversion was over. I do not of course. (Heck, all the file conversions don't work either...so, I'm even further confused)
Will someone please tell me if it's possible to convert a dvd to one file (just like the ipod store has when I downloaded the Alfred Hitchcock shows--each episode is just one file). I've tried Super DVD ipod Converter--that did not download to computer properly--and I received NO support from them. The sales office would answer my emails by sending them to the support desk--the support desk never responded.
I've tried Videroa without success. I've gone to BitComent. I just don't know what I'm doing obviously.
What website allows us to download ipod ready movies?
Thank you to anyone who can guide me in the right direction and tell me what I should be looking at.

i use a program called ffmpegx, it's shareware ($15) but will work for free with a nag screen. it uses open source unix programs that you can download (the program gives you the locations). the program is awesome, open up any file format, and save to almost any format, it even has a preset for ipod video, and ipod video for tv. definitely worth checking out. i converted the whole season of clone high easily. it even has tools to fix, author, and combine files... very versatile.

How to convert vi´s writen in version 5.1 to version 6.1, is there a converter that could be downloaded​?

Similar Messages

Maybe you are looking for

How to convert vi´s writen in version 5.1 to version 6.1, is there a converter that could be downloaded?