How to cooperate the current mail system with Sun Java Commnication Suite 5
Dear all and Shane,
Excuse me for bothering you again.
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5. I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5.
My plan is as following
1. Sun Java Communication suites 5 server ( I called it comms5 ) will be in DMZ zone and will open the necessary ports in firewall.
2. I will create more than six sub domain name in Sun Delegate server and the necessary accounts within these domain names.
3. All messages will be transmitted via Postfix and clients will retrieve from Courier-IMAP
4. All Clients included other branch offices will use different mail clients to share their calendars, contacts via COMMS5 ( But how will COMMS handle the messages such like invitation ? )
Any suggestions will appreciate.
PS: Is it possible to classify the contacts in outlook address book ?
For example, when user click the receiver, it will show like as following
GLOBAL ADDRESS BOOK
--Director
--and so on
----CN.BRANCH OFFICE
-----------CN01 EMAIL ADDRESS
-----------CN02 EMAIL ADDRESS
-----------CN03 EMAIL ADDRESS
and so on
----JP.BRANCH OFFICE
-----------JP01 EMAIL ADDRESS
-----------JP02 EMAIL ADDRESS
-----------JP03 EMAIL ADDRESS
and so on
----TW.BRANCH OFFICE
and Due to the user account is located in CN.BRANCH OFFICE, it will extend the CN.BRANCH OFFICE contacts level.
Excuse me for bad English, hope you can understand it.
Best Regards,
Bruce
Dogz wrote:
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5.
I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.Getting your current mail system to 'co-operate' in this way will require more time then simply migrating the accounts of users on the current mail system to the comm-suite-5 installation and making use of UWC for Webmail access and ClamAV/SpamAssassin integration within the messaging MTA.
Also the use of Outlook Connector with a non-Sun IMAP backend isn't supported, nor is the use of a non-Sun IMAP backend possible with UWC.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5. Once again I should remind you that CentOS is not a supported platform for comm-suite-5
Regards,
Shane.
Similar Messages
-
How to get the current logical system?
Dear Abapers:
I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!Hi,
Check with the table T000, the Logical system field name is LOGSYS.
Regards
Thiru -
How to interface the Weigh Bridge System with ABAP thru' RS232 PORT
Hi Gurus,
Can any one guide me how to interface the Weigh Bridge System with ABAP thru' RS232 PORT. I think we have to use the BAPI. What is the name of the BAPI.
I have to capture the GROSS WEIGHT, TARE WEIGHT. can any one give me the code for that.
Goodwill
Jacob charlesHi Jacob,
<b>You can integrate Weigh Bridge with SAP ABAP .
I have done this for one of our projects
The technology used in RFC SDK and DCOM Connector.
Refer to this link
SAP Business One SDK Version 2005 [original link is broken]
Search here for sap software distribution center link
https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dndcom/html/sapintegration.asp
http://www.intelligententerprise.com/channels/applications/feature/archive/homann.jhtml;jsessionid=BR44S4YLZ0HSGQSNDLOSKHSCJUNN2JVN?_requestid=505707
www.sapgenie.com/sapgenie/docs/SAP%20Connectors.doc
help.sap.com/printdocu/core/ Print46c/en/data/pdf/BCMIDDCOM/BCMIDDCOM.pdf</b>
Good Luck and thanks
AK -
Getting the current operating system information through java
hi ,
How can i get the information about the current operating system on which i am working through the java application.System.getProperties() and look through the results. All kinds of interesting stuff in there.
-
How tall are the current Macbook Airs with lid open?
I ask this because I'm interested in buying the 11" or 13" and want to position a monitor behind it but it needs to be higher than the screen of the Air.
It's going to vary a little depending on the angle of the screen but my 2011 13" Air is 9" high with the screen at a 90º angle.
-
How to get the current process Id from a java program
Can we fetch the process id froma a program as we do it in c++ as getCurrentProcessId()
why not to launch a process like ("rundll.exe _params_") and get its output data
sorry, i'm not in WinAPI to continue with params, but you should know i think or consult somebody.
or there is special java package, which can call windows functions. you can find it in Microsoft Java SDK. -
I have an early MiniMac with OS X 10.4.11. Can I get a free OS upgrade and which version should I choose? Do I just download and over ride the current OS system or what?
First what model Mini do you have? That will determine how high y can go.
How to identify Mac mini models
In any event you will have to pay -
using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro 10.6.8)
Have a read here http://support.apple.com/kb/TS1722 for solution.
Stefan -
Q: How to retrieve the current URL with PL/SQL
I've got a pair of dynamic page portlets on a page. The first is simply an input text box and a submit button, the second is an inventory 'report' based on what is entered in the text box. When a value is entered and the button pressed, there is javascript behind the button that takes the current URL, adds '&ITEM=XXXXXXXX' (removing it first if this is not the first invocation of the page), and redirects to the new page.
The second portlet uses the &ITEM parm to list a bill of materials for the item. If one of the items possesses a sub-assembly, I want to display the item# in an <a href= manner to make it so the user can simply click on the link to see the BOM of the subassembly.
To do this, I believe I need to capture the current url and modify it as required to pass the new &ITEM value. I'm having a lot of trouble trying to figure out how to get the current page url. Any help would be greatly appreciated!
GeoffHello
I have a similar problem I have developed a pl/sql portlet and put it into a page, this portlets display a dynamic page. This dynamic page have a search functionality, what I am trying to do is that when I click the search button on the dynamic page it recall the whole page and pass the paremeter that the user wrote on the search box, then the portlet that contains the dynamic page recieve the parameter and recall the dynamic page with the parameter that was received. The problem that I have is that the portlet receive the parameter but when I pass the parameter to the dynamic page it doesn't get it. This is the way the I am calling the dynamic page inside my portlet into the show procedure:
EXECUTE IMMEDIATE
'begin
APP_NAME.PG_DYN_DIR_ALFABETICO.show (
p_arg_names => PORTAL30.wwv_standard_util.string_to_table2(''url_page'',''search_param''),
p_arg_values => PORTAL30.wwv_standard_util.string_to_table2(:1,:2));
end;'
using url_pg,p_text1;
The dynamic page receive the first parameter(url_page) but not the second one(p_text1), I have checked that the p_text1 has a value on my portlet before I send it to the dynamic page so I really don't understand why my dynamic page doesn't work.
Please HELP ME. I am desperate
Ana Lasprilla -
How does someone who has a 1st generation iPad but no computer update to the current operating system?
You take the iPad to someone or somewhere where you can update the device using iTunes on a computer. There is no other way to do it. You must use iTunes on a computer.
Apple Stores will update the device for you. Make an appointment at an Apple Store for help. -
I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang -
Configuring Outbound and Inbound SMTP mails with SUN Java messaging system
hi all,
i am new to Solaris i have deployed SUN java comuunication Suite. How do i configure my messaging server to send outgoing mails through existing gateway and recieve inbound mails from the same gateway?
Currently my server is connected to the internet directly i am able to send a mail to an external domain for example gmail. Can anyone help me out in understanding the default functioning of external mail routing and how do i point to a gateway?
Thanks,
ZafrulHi,
zkhan wrote:
i am new to Solaris i have deployed SUN java comuunication Suite. Welcome. Some good resources you should look at are the following:
http://www.sun.com/bigadmin/hubs/comms/overview/index.jsp
http://msg.wikidoc.info/
http://blogs.sun.com/factotum/
How do i configure my messaging server to send outgoing mails through existing gateway and recieve inbound mails from the same gateway?There is two steps to this.
To configure outgoing emails to be relayed through a gateway, you need to modify the <msg_base>/config/imta.cnf MTA configuration file and add "deamon <gateway hostname>" to your tcp_local channel configuration e.g.
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0
loopcheck daemon mygateway.com
tcp-daemonTo allow the gateway system to send emails to your host unconditionally, modify the <msg_base>/config/mappings MTA configuration fail and add the gateway's IP address to the INTERNAL_IP mapping table e.g. (where the gateway has an IP of 1.2.3.4 and your system has an IP of 192.168.1.20)
INTERNAL_IP
$(192.168.1.20/24) $Y
$(1.2.3.4/32) $Y
127.0.0.1 $Y
* $NOnce you have done this you will need to rebuild the MTA configuration cache and restart the MTA processes.
<msg_base>/sbin/imsimta cnbuild
<msg_base>/sbin/imsimta restart
Currently my server is connected to the internet directly i am able to send a mail to an external domain for example gmail. Can anyone help me out in understanding the default functioning of external mail routing and how do i point to a gateway?For the understanding, you will need to read-up the manuals. Messaging server is a flexible and powerful product for sending/processing emails, but with that flexibility comes complexity. I suggest you start by reading the Messaging Server Administration Guide:
http://docs.sun.com/app/docs/doc/819-4428
Regards,
Shane. -
When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support -
How to check the current EHP stack level? in SAP
Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
SAP_HR 604 0029
SAP_HRCAR 604 0029
SAP_HRCAT 604 0029
SAP_HRCAU 604 0029
SAP_HRCBE 604 0029
SAP_HRCBR 604 0029
SAP_HRCCA 604 0029
SAP_HRCCH 604 0029
SAP_HRCCL 604 0029
SAP_HRCCN 604 0029
SAP_HRCDE 604 0029
SAP_HRCDK 604 0029
SAP_HRCES 604 0029
SAP_HRCFI 604 0029
SAP_HRCFR 604 0029
SAP_HRCGB 604 0031
SAP_HRCHK 604 0029
SAP_HRCID 604 0029
SAP_HRCIE 604 0029
SAP_HRCIN 604 0029
SAP_HRCIT 604 0029
SAP_HRCJP 604 0029
SAP_HRCKR 604 0029
SAP_HRCMX 604 0029
SAP_HRCMY 604 0029
SAP_HRCNL 604 0029
SAP_HRCNO 604 0029
SAP_HRCNZ 604 0029
SAP_HRCPH 604 0029
SAP_HRCPT 604 0029
SAP_HRCRU 604 0029
SAP_HRCSE 604 0029
SAP_HRCSG 604 0029
SAP_HRCTH 604 0029
SAP_HRCTW 604 0029
SAP_HRCUN 604 0029
SAP_HRCUS 604 0029
SAP_HRCVE 604 0029
SAP_HRCZA 604 0029
SAP_HRGXX 604 0029
SAP_HRRXX 604 0029
EA-IPPE 400 0018
EA-APPL 604 0008
EA-DFPS 600 0018
EA-FINSERV 604 0007
EA-GLTRADE 604 0008
EA-HR 604 0029
EA-HRCAR 604 0029
EA-HRCAT 604 0029
EA-HRCAU 604 0029
EA-HRCBE 604 0029
EA-HRCBR 604 0029
EA-HRCCA 604 0029
EA-HRCCH 604 0029
EA-HRCCN 604 0029
EA-HRCDE 604 0029
EA-HRCDK 604 0029
EA-HRCES 604 0029
EA-HRCFI 604 0029
EA-HRCFR 604 0029
EA-HRCGB 604 0029
EA-HRCHK 604 0029
EA-HRCID 604 0029
EA-HRCIE 604 0029
EA-HRCIN 604 0029
EA-HRCIT 604 0029
EA-HRCJP 604 0029
EA-HRCKR 604 0029
EA-HRCMX 604 0029
EA-HRCMY 604 0029
EA-HRCNL 604 0029
EA-HRCNO 604 0029
EA-HRCNZ 604 0029
EA-HRCPH 604 0029
EA-HRCPT 604 0029
EA-HRCRU 604 0029
EA-HRCSE 604 0029
EA-HRCSG 604 0029
EA-HRCTH 604 0029
EA-HRCTW 604 0029
EA-HRCUN 604 0029
EA-HRCUS 604 0029
EA-HRCVE 604 0029
EA-HRCZA 604 0029
EA-HRGXX 604 0029
EA-HRRXX 604 0029
EA-PS 604 0007
EA-RETAIL 604 0007
FINBASIS 604 0008
ECC-DIMP 600 0018
ERECRUIT 604 0008
FI-CA 604 0008
FI-CAX 604 0007
INSURANCE 600 0018
IS-CWM 600 0018
IS-H 600 0024
IS-M 600 0018
IS-OIL 600 0018
IS-PS-CA 604 0007
IS-UT 600 0018
LSOFE 600 0018
SEM-BW 604 0008
ST-A/PI 01M_ECC600 0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AMHi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori -
How to get the current week from sysdate?
Hi sir,
i want to know how to get the current week from sysdate?
thanksHi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios
Maybe you are looking for
-
Previous button always highlighted
My iTunes player is getting on my nerves. For some reason, the Previous Button is always highlighted. So whenever I press the spacebar, it does not stop the player, but it rewinds the song to the beginning. How do I get this **** button to un-high
-
Sound not working on Desktop pavilion A6000
hi all! my friends desktop hp pavilion a6000, after he change from windows vista home to vista business. It keeps saying that no sound driver is intalled. however everytime we log in , a pop box appear saying " Windows needs to install driver softwer
-
Hi, Is partial cancellation of the items possible in the excise invoice and ARE1 document, But in the current Standard the partial cancellation is not allowed. Eg: I have 7 line item details in Excise invoice and ARE1, In this i need to cancel only 2
-
Hi all I want to have vision on my tv in the bedroom but dont know how to do it. Can any one help please
-
this is why: I've installed, uninstalled repeatedly. I still can't customize the toolbar, or the bookmarks folder, the homepage or at times, type an address in the URL bar. I've f$cked the disk, still non-functional Just did a fresh install, and I'm