How to coordinate the height of a field in 9i reporter

hi all,
I can coordinate the width of a field through the wizard ,how can i set the height of the field ? now i do this just through dragging by hand.
please help .
thanks in advance .

hi,Denis Segard,
thanks for your help,but i have another question now.
when the height of the field is expanded, how can i let the content of the field is centered the vertical direction ? you know in the horizontal aspect, the centered property works well, but in the vertical direction how to center the content of the field?
hope for your reply.
shawn ding
you can do the following :
1) select the field
2) Menu: Layout / Size objects ...
3) set the Width and Height of the field.

Similar Messages

How to increase the width of a field in oracle reports 6i

Hello,
I'm facing a problem related to width of field. I have a table with field abc varchar2(1500) and when I try to show it in report. I'm unable to see complete data because field size in report is 300.
Kindly guide me to increase the size/width of field in oracle report 6i
thanks in advance
sadiq

Post your question on Reports forum
Reports

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

How to display the Quantity and Rate fields in PO Report

I am trying to get a Purchase Order report that has the following fields in it.
1. Ordering Date
2. Purchase Order ID
3. Supplier
4. Product
5 Quantity
6. Rate
7. Amount (Quantity x Amount)
The reports under the Purchase Order WoC do not display Quantity and Rate.
Any more information like pointing to an Article or Help Topic is appreciated.
Regards
Yagyesh

Try the Purchase Order Volume report as your starting point.
I got everything you need onto that report in about two minutes (except quantity which may take longer).
The report can be found under the reports menu or you can find it under Business Analytics WoC if you have access.
I have been using the Business Analytics WoC for all of my reporting since it saves me the step of going to each WoC to look for the core reports.
Jim

How to print the value of a field of type FLTP

hi experts,
pls tell me how to print the value of a field of type FLTP. i.e in decimal format not in exponential format.
thankyou.
krishna

Hi ,
I dont think in Floating point u can able to go for the decimal point display as it is for the minimum precission display..
Define the variable as the 'packed' type and then u can able to define the decimal point...
Cheers,
SImha.

How to encrypt the text in password field in Oracle Forms version 6i

Need help!
How to encrypt the text in password field in Oracle Forms version 6i?
one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be encrypted?
Thanks!

Hello,
Do you mean "hidden" (replaced with stars) or encrypted (that needs to be decrypted ?
Francois

How to change the lenth of existing field in sap standard table

Hi all,
can anybody help,my requirement is, how to change the length of existing field in sap standard table....
thanks in advance..

Which field are you thinking of in particular? Are you wanting to increase or decrease the length?
Some fields are used so extensively that a change to their length will mean adjusting many tables, some of them potentially very large, and hence taking a long time to adjust.
Some standard SAP programs expect certain fields to be of specific lengths and won't work if the length is changed.
Some screens could cease to work.
If you decrease length, then you could lose data.
matt

How to change the width of a field?

Hi all,
I would like to decrease the width of a field on my report.
But I can't do it in the Property palette. I am not able to change the width property. The width of the database column is varchar2(255). I do not want to decrease the length of the database column, but only the width property of the field.
Any ideas?
Regards

As far as I knows, you can only increase the width of a
character column. If you wish to decrease it, I would think
you'd have to drop/delete the whole column and recreate it,
loosing all your data in the process (unless you create a
temporary table into which you copy the data first, and then
copy it back into the "new" column - the oracle db will truncate
the data automatically).
SQL Plus is very well suited for the task, but requires you to
write the appropriate SQL statements yourself. Other tools may
simplify this for you (I use SQL Plus myself).
Hope this helps.
Eric (guest) wrote:
: Hai, How to change the width of the field in a particular
table.
: I try to do so by using 'Schema Builder ver 6.0', but the
result
: come with a message like below :-
: OBE-15472: Cannot decrease length of existing column
: 1. where should I be to modify the column width ?
: 2. is SQL Plus 8.0 can do so? if yes, what's the syntax ?
null

How To Increase the Size of Memo Fields 4000 Char in WebCenter 11g?

How To Increase the Size of Memo Fields greater than 4000 Char in WebCenter Content (UCM) 11g?
I was able to increase the size of Memo field from 2000 Char to 4000 by setting parameter value MEMOFIELDSIZE=4000 . But the requirement is to increase the size more than 4000 around 7000 char but Database(Oracle 11G) is not supporting more than 4000 char.
Is there any other way to increase the size of Memo field?
Thanks in Advance!!
Regards
Ram

Hello All,
Thanks for your responses.
Let me explain the scenario again in detail:
1. we have three meta-data fileds xProductCategory,xProductFamily and xProducts
2. These fields are related with DCL feature and corresponding values are being stored in corresponding custom Views
3. xProducFamily is dependent of xProductCategory and xProduct is dependent on xProductFamily
4. currently, there are around 250 Product values and average name of Product can be of 25 Char, so if we are selecting all product values for some Contents then Product Values are being stored in DocMeta table as comma separated values with one space, so total characters are being very high than 4K Char.
5. Currently view that is storing the Product values, stores "Name" column instead of ID(like 1,2,3....)
6. And our Content Server is integrated with Oracle WebSenter Portal, where logic has written to retrieve the contents based on "Product Name" instead of "Product ID" and already we are in UAT phase.Currently we are not in situation to revert the changes from Product Name to Product ID.
7. Also if we are storing the values on the basis of Product ID, then again the issue may arise in Future, if the number of Products increased.
Hoping the issue explanation is clear now and waiting for some possible solution for increasing the length of memo field.
Thanks in Advance !!
Regards
Ram

How to increase the height of a tabbed layout

How to increase the height of a tabbed layout? I do have a form inside a panelTabbed layout which is not fitting inside.Is there any css class available ?
Thanks
Suneesh

Hi,
+"My panel tabbed layout is inside a detailStamp facet of a table"+
you can set the StretchChildren property on the ShowDetailItem components to make the panel tab to resize the contained children. I set the inline style on a paneltab and the result shows in the rendered output
Frank

How to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL)

Hi Experts,
Can you please tell me to how to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL) when saving of the shipment document.

shipment cost calculation only on the Leg level and not on header level. Currently a lot of confusion happened after creating the shipment cost document and found that the status is u201CBu201D.
now we intend to define detailed specifications to how to create this new user exit to update the shipment cost relevancy at shipment header.
The main functionality of the user exit to be created is to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL).can u pls tell how to do this.

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

How to adjust the text in input field

Hi Expert,
New in VC development. Can someone guide how to adjust the text in input field? Because of long text length it is not displaying fully in visual composer iView so user are not able to see the entire text in input fields

HI Kundan,
I assume that you have already tried different options perent in Label Postion for the field.
If none of these options meet your requirement then you can try the following workaround:
In the display properties, select label position as no label.
In the form view add a new UI Control for Plain Text or HTML text and change its Label to "Material Number".
Now place this new UI Control in before your actual Input field such that it appears as the field label.
Hope this helps.
Regards,
Rk

How to find the Ranges for a field ?

Hello All,
 Can anyone tell me how to find the ranges for a field.
1, i.e say I want the Ranges Structure for the field LIFNR.
 The ranges structure for this is "RANGE_LIFNR".
 This I used in my Program since I know it previously.
 But now I want the ranges structure for the field VBELN (Delivery Document).
 I don't know what is it !!!!!
2, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.K

Hi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy

How to restrict the length of input field

Hi,
How to restrict the length of input field. That is we should not be able to enter more thatn 10 charecters.
Regards,
H.V.Swathi

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How to coordinate the height of a field in 9i reporter

Similar Messages

Maybe you are looking for