How to copy a clip from one event to another?

Hi all... I need some help please.
I have several events with multiple clips in them.
I want to create a new event. I would like to COPY multiple different clips to this new event. I don't want to move clips from the events they are in now.
I want to do this because I want to put together a movie with several clips that I want to consolidte from several events. But I don't want to move the clips, I want to copy them into a new event. So yes, basically have duplicate clips, but in two different events.
Is this possible? Please tell me it is
Thanks.

Thanks AppleMan... was hoping you would reply.
Here is my situation. I have an external hard drive with several years of events (2005-2011). I want to take several selected clips from those events to put on my internal hard drive. The clips I want to use for this video (a surprise video for bday too) I want to bring to a Newly created Single event on the hard drive. This way I have all clips I want to use to make this video in one location. I don't want to move them from the EHD.
This way I can work on the video without that EHD (on my MBP).
After I am done making the video, I'll likely delete this event with the duplicates. So it will take up hard drive space for only a few months. And it won't be tons of clips... just selected ones.
Thank you!!
p.s. Wait, if I move them from an EHD to a new single event on IHD, will it move or copy them? Maybe it does copy them rather than move them? I don't know.
The other issue is I have all clips from 2012 on my IHD. I would like to copy some of those clips to this new event also. Again, so all clips being used in the video montage are in a single location. This will be for ease of making video since I will have all clips being used in one location/event.
Thanks again AppleMan.

Similar Messages

How do I move clips from one Event to another?

How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to copy OVD configuration from one machine to another?

We have two machines with OVD servers on them. The configurations should be identical from one machine to the other. We suspect there is a problem with the configuration on one of them. We need to know how to copy OVD configuration from one machine to another.
Can you tell us how to do that?

well i have this in mind which may help you.
You would need to have a public ip address to the machine you have consoled to and on internet.
Download the tftp software from below link.
http://tftpd32.jounin.net/
This software does not only act as the tftp server but also you can select the interface of you ethernet card as tftp server ip address.
For ex if you are connected to a console and have a wireless card which is connected to internet also you connect you eth lan card to the eth or fast eth of the router.
you can select which ever interface you want to act as the tftp server.
you will need to add ip addres for you lan card and also config the router port as same if needed.

How to copy List item from one list to another using SPD workflow using HTTP call web service

Hi,
How to copy List item from one list to another using SPD workflow using HTTP call web service.
Both the Lists are in different Web applications.
Regards, Shreyas R S

Hi Shreyas,
From your post, it seems that you are using SharePoint 2013 workflow platform in SPD.
If that is the case, we can use Call HTTP web service action to get the item data, but we cannot use Call HTTP web service to create a new item in the list in another web application with these data.
As my test, we would get Unauthorized error when using Call HTTP web service action to create a new item in a list in another web application.
So I recommend to achieve this goal programmatically.
More references:
https://msdn.microsoft.com/en-us/library/office/jj164022.aspx
https://msdn.microsoft.com/en-us/library/office/dn292552.aspx?f=255&MSPPError=-2147217396
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How To Copy Selected Music From One Library to Another?

What is the best way to copy selected music from one library to another?
I have a big and growing iTunes library -- 33,000 songs.
A year ago I copied my library to my daughter's new iMac. Now, a year later, I'm off to visit her and wonder how best to update her library. In the past year I have added a number of items to my library and I'm sure she has done the same -- some might be the same but many will be different.
How do I update her library with the new things I've added in the past year but not wipe out things she had added or duplicate when we each have a song?
I can load any / all of my stuff on an external HD and take that to plug in to her computer. Then what? I want to avoid duplicates and make sure I get stuff like album artwork.
I'm running iTune 10.4 on an iMac with OS X 10.6.8 -- my daughter will have the same iTunes and OS X once we update her software.
Any advice would be great.
Thanks

If you're sharing the same Apple ID and all your songs are from the iTunes Store, it's easy:
In iTunes on your computer, go to File->Preferences->Store and check the box next to MUSIC under AUTOMATIC DOWNLOADS.
You should also read this article, the section titled TO DOWNLOAD PREVIOUSLY PURCHASED APPS, BOOKS, MUSIC, OR TV SHOWS TO YOUR COMPUTER:
http://support.apple.com/kb/ht2519
You could also use an rsync utility such as backuplist+ to perform a 2-way sync of the files in your two libraries while your computers are connected via FireWire with one of them in FireWire Target Disk Mode, or from your external hard drive with your daughter's computer and then to yours again. After that, you'll need to use iTunes on each computer to update its library with the new files:
http://rdutoit.home.comcast.net/~rdutoit/pub/robsoft/pages/backup.html
This last would also be the preferred method if you have authorized each other's computers for media purchased with each other's Apple IDs (i.e. you are not sharing the same Apple ID), or if you have music from sources other than the iTunes Store. Most likely, though, music from sources other than the iTunes Store would not be legal to copy in this way for this purpose, although there is probably no technical impediment.

How to copy pf-status from one program to another program

Hi Gurus,
Can any one tell me the procedure how to copy pf-status of one program to another program .if i want to copy pf-status which is in production server to development server how can i do this.pls help me out.
Regards.

Hi,
GO TO SE41,
Select Status,
In from u can give ur old pgm and staus name
In To u can ur new one .
Save and activate.
Regards,
S.nehru.

How to copy the data from one database to another database without DB link

Good Day,
I want to copy the data from one database to another database with out DB link but the structure is same in both.
Thanks
Nihar

You could use SQL*Plus' COPY command
http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

How to Copy the PLD from one database to another

Dear Members,
i have designed the PLD for Purchase Order, i want to copy the particular PLD into another Database.
i tried to copy the PLD from one database to another through copy express.. i copied the PLD sucessfully. But the problem is,it copies all PLD's from one database to another. i want only the Purchaseorder PLD has to be copied in to another database.any body can help me in this regard.
With Regards,
G.shankar Ganesh

Hi,
select * into A1 from RDOC where Author !='System'
select * into A2 from RITM where Doccode in (select Doccode from A1 )
select * from A1
select * from A2
sp_generate_inserts 'A1'
sp_generate_inserts 'A2'
you will get Insert scripts of A1 and A2 tables .After that You 'll Replace A1 to RDOC and A2 to RITM.
So that you can RUN this SQL srcipts any where (In any Database)
but First u have to run sp_generate_inserts Storeprocedure(from websites) .
drop table A1,A2

How can I move clips from one library to another? Clips are still in original drive and not in new drive.

I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
Thanks in advance.

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to copy iPhoto keywords from one library to another

I have over 30 iPhoto Libraries. Managing them is great using iPhoto Library, but keyword management is awful (if iPLM has a way I haven't found it). I would like to know how to copy keywords from one library to another. It's a pain to have to continually doing manual setup.
In advance, THANKS!

With that many photos you might consider using one of the high end DAM (digital asset management) applications. I use Media Pro 1. It uses catalogs of thumbnails that are linked to the photos on your hard drive, CDs or wherever. A single catalog can hold 250,000 images. It uses Catalog Sets like Events in iPhoto. There are Categories which are like albums in iPhoto. Those and Catalog Sets are virtual. You can batch rename files once in the catalog either by date or text. The folders holding the photos on the hard drive can be set up auto update in the catalog so when you add a photo to the folder it will appear in the catalog. You can add keywords, hierarchical keywords, descriptions, etc. and write them back to the original file.
It has some built in editing capability and versioning capability. Clicking on a keyword will display all photos with that keyword quickly. Searches can be made across multiple catalogs and have the results displayed in a new catalog.
I use it as my primary DAM and iPhoto for special projects like books, etc. The catalogs can be viewed and keywords, descriptions added, etc. without the original files being available. You just can't do any editing, slideshows or anything that requires the full sized file.
OT

Simple: How to copy a Table from one Database to another?

I already know how to do it by creating an identical table and then inserting the Data.
Like so:
SET IDENTITY_INSERT dByDtMinusC5 ON
INSERT INTO [DB1]..T1 ([Id], [HbyD] , [K] )
SELECT [Id], [[HbyD]]] ,[K] FROM [DB2]..T2
As you can see I need to have T1 in order to copy T2 into DB1. Is there any way that I could auto create T1 and copy T2?
There are so many forums in sql server Category, I hope I posted in the right one :0 . We need tag system for forums.

Hi Bhupinder,
According to your description, you want to copy a table with Primary keys from one database to another database.
As per my understanding, I think the best method is use Transfer SQL Server Objects Task in SQL Server Integration Services. The Transfer SQL Server Objects task transfers one or more types of objects in a SQL Server database between instances of SQL Server.
Server roles, roles, and users from the specified database can be copied, as well as the permissions for the transferred objects. Indexes, Triggers, Full-text indexes, Primary keys, Foreign keys can also be copied.
To use the Transfer SQL Server Objects Task, we should create a SQL Server Integration Services Project in SQL Server Data Tools, then drag a Transfer SQL Server Objects Task to Control Flow pane. Specify SourceConnection, SourceDatabase, DestinationConnection
and DestinationDatabase for the Connection, select the table in the ObjectsToCopy category, then change CopyPrimaryKeys to True and the other corresponding properties in the task.
References:
Transfer SQL Server Objects Task
Transfer SQL Server Objects Task in SSIS 2008 R2 With Example
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to Copy Customized Partner From One Opprtunity to Another in CRM

Hi experts,
How to save more than one same type partner(with same partner FCT) in CRM opportunity Application?
I am using following Function Module...
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
it_partner = lt_partner_com
CHANGING
ct_input_fields = lt_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
I am giving the input field name as 'PARTNER_FCT', 'PARTNER_NO', 'DISPLAY_TYPE', 'NO_TYPE', 'MAIN_PARTNER' and 'RELATION_PARTNER'.
I have created one partner function for saving additional entity. And I am trying copy one existion opportunity by using CRM_COPY_PROCESS. And I am maintaining that partner via 'CRM_ORDER_MAINTAIN'. But it is not saving the data in session level also.
The limit of that partner FCT record is 0-999.
Please help me how to save this.

Hi,
Forgive me if I've misunderstood your query, but what you are asking sounds like standard customization to me - Copy Control. I assume you have created your own Opportunity type and that is where the problem lies?
Have a look at the following IMG path (transaction SPRO > then press F5 on next screen to open the IMG):
SAP Implementation Guide > Customer Relationship Management > Transactions > Settings for Opportunities > Define Copying Control for Opportunity Item to Opportunity
Create an entry for your opportunity by entering the source opportunity (to copy the partner from) and the target opportunity (to copy the partner to) and tick the "Partners" checkbox for the new entry - that will automatically copy the partner from one opportunity to the next as specified.
Hope this helps.
Thanks,
Andrew G.

How to copy a query from one infoprovider to another infoprovider

Hi Experts,
Could anyone suggest me on how to copy a particular query from one infoprovider to another infoprovider which are identical and have the same objects in them.
Thanx in advance
Lalit

Hi Lalith,
Use the Transaction RSZC and specify the - > Source InfoCube -> Target InfoCube and select the queries you want to copy.
Hope it helps
Regards
Srikanth

HOW to copy Form field from one RTF to another RTF

Hi Expert
I have developed 20 reports in BI Publisher which is using xml as data source. So to access the data i have done the xml coding for each form field.
Now i want to copy the form field from one rtf to another, while doing the copy paste of the form field from one rtf to another it is not copying the xml coding. It is appearing in the new rtf as below
<?ref:xdo0391?>
Can you guys suggest me how to achieve the same. Is there any setting need to be changed so that while do the copy paste the form field it will copy the backend code also.
Thanks in advance.
Thanks
Srikant

make your template set as backward compatabile before you do anything on template. load the xml and then copy the form field. it should work. dont try to open the field without loading xml.

How to copy brush masks from one adjustment to another

Thought the readers of this forum might like to read my recent blog post on the aforementioned subject, with complete step-by-step instructions. I've been successfully using the technique outlined in the post for quite some time and finally got around to writing up a little tutorial.
http://johnpurlia.wordpress.com/2011/06/06/and-now-a-short-venture-into-technolo gy-—-aperture-brushes-unmasked/
Comments welcomed, of course.
Enjoy!!

Hi Tina,
To copy either a Script or a Smartform fron one client to another client i.e from reference client 000 to any client say 010 follow instructions as given below:
Go to Tcode SE71->Give Form name MEDRUCK then go to Menu path Utilities->Copy From Client, give
Form Name: MEDRUCK
SOURCE:000 (it will be already there)
Target Form: Zmedruck(here give ur form zname)
Execute
It will be copied into all languages.
Then come back to SE71
Give your form name Zmedruck
Language:: de then goto change mode
then menu path->utilities->convert original languge to En and enter you will get a message original language of form zmedruck converted from de to en,
now change language de to en in se71 main screen and then do what ever changes you want to do , this is how you can copy a script or smartform from one client to another client.
If this answer is useful reward points any queries revert me back.

How to copy a clip from one event to another?

Similar Messages

Maybe you are looking for