How to copy a report into my namespace
how to copy a report into my namespace as said in this blog....
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
how to copy it my namespace
I didn't get what exactly you mean?
If you run any interface you will find its details in SXMB_MONI.
This report will pickup the data from Moni and resend the message. So its not Interface specific.
You copy the report from SE38 and try.
Gaurav Jain
Reward Points if answer is helpful
Similar Messages
-
My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam -
How to include a report into the SAP-SCRIPT
plz tell me
How to include a report into the SAP-SCRIPT
ASAPcreat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*& Form get_data1
text
-->IN_DATA text
-->OUT_DATA text
FORM get_data1 TABLES in_data STRUCTURE itcsy
out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*& Form get_data
This form is to read details from LIKP *
-->IN_DATA text
-->OUT_DATA text
FORM get_data TABLES in_data STRUCTURE itcsy
out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM. "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using <ap-vbeln& (Reference field.this field should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM -
How to copy actual data into current forecast period
Hi gurus.
I need your guidance on how to copy actual data into current forecast period.
This is my case. Let's say I have the following figures for my actuals:
January 2007 Actual = $110,000.
February 2007 Actual = $120,000.
March 2007 Actual = $80,000.
April 2007 Actual = $100,000.
Now, my user want to choose any month as the basis for her forecast for the remaining periods. Let's say, she wanted to choose April 2007 Actual as the basis for the remaining forecast periods, so I should be able to display the following figures in my planning folder:
May 2007 Forecast = $100,000.
June 2007 Forecast = $100,000.
July 2007 Forecast = $100,000.
August 2007 Forecast = $100,000.
September 2007 Forecast = $100,000.
October 2007 Forecast = $100,000.
November 2007 Forecast = $100,000.
December 2007 Forecast = $100,000.
Can someone guide me on how to do that?
Points will be given to good and best answers.
Thanks.Hi Fulham,
Technical answer:
First, you need to allow your user to indicate wich month is the reference for the copy. I suggest you to add a new key figure in your actual layout (a 'customizing' layout) that your user will use as a flag:
January 2007 Actual = $110,000
January 2007 Flag = 0
February 2007 Actual = $120,000
February 2007 Flag = 0
March 2007 Actual = $80,000
March 2007 Flag = 0
April 2007 Actual = $100,000
April 2007 <b>Flag = 1</b>
<i>(Help to a fox or an abap exit you can check that only one month is 'flagged')</i>
Then, in the corresponding level for the data input, you use a function exit in Abap, which will:
- read the previous customizing layout help to API_SEMBPS_GETDATA so you can get the flagged month and its actual amount ($100,000)
- generate the news rows into the table XTH_DATA which will be automatically posted in the level with the actual amount
Is that clear?
Regards, -
How to save BI report into normal excel sheet in Bex Analyzer
Hi Experts,
version of Bex Analyzer:
Bi addon 7.x
support package 7,patch 1
version 7004.4.0.5
excel-2003
when i am trying to save the report into excel in Bex Analyzer as below:
file-save as->Microsoft excel work.
when I open excel I am getting pop up windowu201Dthis file contains macros with an expired or revoked signature.Since your running under high security level,these macros will be disabled.u201D
when I click ok I am getting one more pop upwindow as u201Cmacros are diabled because the security level is set to high and a digitally signed trusted certificate is not attached to macros.to run the macros,change the security level to a lower setting(not recommended),or request the macros signed by the author using a certificate issued by a certificate authority.
what are these macros? why i am getting this pop up windows
When i opened the excel report is not looks like general excel report.how can I generate general excel report .I should not want to get excel report as in bex analyzer.I donu2019t want to have author ,status of data,chart,filter,information in excel report.
what settings I have to made to save the report in general excel format.
As i am new to Bi please correct me if i am wrong.
Anything is appreciable.
regards,
naresh.Macros in general are nothing but piece of code in excel.
To allow unsigned macros to run, the Trust all installed add-ins and templates check box must be selected on the Trusted Publishers tab of the Security dialog box. This option is selected by default. If it is not selected (recommended), Excel allows you to run only macros that have trusted digital signatures.
1. On the Tools menu, point to Macro, and then click Security.
2. On the Trusted Publishers tab, select the Trust all installed add-ins and templates check box. -
Hi Experts,
I have written a classical report with write statements and when i am downloading in excel the format is mismatching and now i want to convert into PDF format.
How to convert into PDF format from Classical report ?
YusufHi yusuf,
please find the below report,,
please make two include programs before executing it,
there codes are pasted below,
INCLUDE zimpr_data_declaration.
INCLUDE zimpr_performs_wrap.
REPORT zimpr_word_wrap NO STANDARD PAGE HEADING LINE-SIZE 115..
INCLUDE for DATA DECLARATION *
INCLUDE zimpr_data_declaration.
INCLUDE for all performs. *
INCLUDE zimpr_performs_wrap.
TOP-OF-PAGE--
TOP-OF-PAGE.
PERFORM f_top_page. "TOP OF THE REPORT PAGE,I.E. HEADER.
START-OF-SELECTION.
SET PF-STATUS 'SEL_SCREEN'. "PF-STATUS OF THE SELECTION SCREEN.
PERFORM f_data_retrieval. "PERFORM FOR ALL SELECT STATEMENTS.
PERFORM f_report_display. "REPORT DISPLAY,WRITE STATEMENTS.
--Define the actions to be performed for pf-status-----
AT USER-COMMAND.
wf_ok_code = sy-ucomm.
wf_save_ok = wf_ok_code.
CLEAR wf_ok_code.
CASE wf_save_ok.
WHEN 'PDF'. "WHEN PDF ICON IS CLICKED,REPORT WILL CONVERT INTO PDF.
loc_repid = sy-repid. "PROGRAM NAME
--THIS FM SETS THE PARAMETERS FOR LAYOUT OF PDF OUTPUT--
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
layout = loc_paart "LANDSCAPE LAYOUT
line_size = loc_linsz "CHARACTER WIDTH OF REPORT
no_dialog = 'X'
user = sy-uname "USERNAME
IMPORTING
out_parameters = loc_print_parms "OUTPUT PARAMETERS WILL BE COLLECTED HERE.
valid = loc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
--FOR GENERATING THE SPOOL NUMBER--
NEW-PAGE PRINT ON NO DIALOG PARAMETERS loc_print_parms. " This allocates the spool no
"to the screen without the dialog screen.
PERFORM f_top_page.
PERFORM f_report_display.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the spool no was generated.
wf_id = sy-spono. " This assign the spool no of the screen to the variable.
--PERFORM FOR GETTING THE PDF OUTPUT--
PERFORM f_pdf_display.
--PERFORM FOR DOWLOADING FILE TO A LOCAL DISK--
PERFORM f_download_local.
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
include data declaration----
*& Include ZIMPR_DATA_DECLARATION
TYPE-POOLS : shlp.
DATA : wf_ordert TYPE aufk-auart. "ORDER TYPE
DATA : wf_order TYPE aufk-aufnr. "ORDER NUMBER
DATA : wf_bdate TYPE afko-gstrp. "BASIC START DATE
DATA : wf_status(4) TYPE c ."rihea-i_astatin. "STATUS
DATA : wf_objnr TYPE jest-objnr VALUE 'OR%'. "Object number
DATA : wf_aufnr TYPE aufk-aufnr.
DATA : wf_name TYPE thead-tdname. "NAME TO PASS IN FM READ_TEXT
DATA : wf_date1(12) TYPE c. "DATE
DATA : wf_i1(3) TYPE n,wc_i1(3) TYPE n VALUE '1'. "COUNTERS FOR REPORT DISPLAY
DATA : wf_i2(3) TYPE n,wc_i2(3) TYPE n VALUE '1'.
DATA : wf_kopf TYPE tdid VALUE 'KOPF',wf_aufk TYPE tdobject VALUE 'AUFK'.
DATA : wf_save_ok TYPE sy-ucomm ,wf_ok_code TYPE sy-ucomm.
DATA: wf_id TYPE tsp01-rqident , " For storing Spool request number
wf_bytes TYPE i . " For storing the bytes of data to be converted to PDF.
DATA : wf_langu(2) TYPE c VALUE 'EN'.
DATA: wf_pripar TYPE pri_params, " Structure for Passing Print Parameters
wf_rcpar TYPE arc_params. " ImageLink structure
DATA : wf_statu TYPE dfies-fieldname VALUE 'STATUS',
wf_field TYPE help_info-dynprofld VALUE 'S_STATUS'.
&--SELECTION SCREEN--
SELECTION-SCREEN BEGIN OF BLOCK b_1 WITH FRAME TITLE text-000.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_ordert FOR wf_ordert . "ORDER TYPE
SELECT-OPTIONS: s_order FOR wf_order OBLIGATORY. "ORDER NUMBER
SELECT-OPTIONS: s_bdate FOR wf_bdate. "BASIC START DATE
SELECT-OPTIONS: s_status FOR wf_status matchcode object zei_sys . "SYSTEM STATUS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN END OF BLOCK b_1.
*--INTERNAL TABLES--
TYPES : BEGIN OF ty_aufk,
aufnr TYPE aufk-aufnr, "OREDR NUMBER
auart TYPE aufk-auart, "ORDER TYPE
objnr TYPE aufk-objnr, "OBJECT NUMBER
ktext type aufk-ktext, "SHORT TEXT
gstrp TYPE afko-gstrp, "BASIC START DATE
END OF ty_aufk.
TYPES : BEGIN OF ty_tj02t,
objnr TYPE aufk-objnr, "OBJECT NUMBER
txt04 TYPE tj02t-txt04, "STATUS
istat TYPE tj02t-istat, "Object status
spras TYPE tj02t-spras, "LANGUAGE KEY
END OF ty_tj02t.
TYPES : BEGIN OF ty_temp,
objnr TYPE aufk-objnr,
status(300) TYPE c,
END OF ty_temp.
TYPES : BEGIN OF ty_wrap,
line(54) TYPE c, "LONG TEXT
END OF ty_wrap.
TYPES : BEGIN OF ty_wrap2,
line(25) TYPE c, "STATUS
END OF ty_wrap2.
TYPES : BEGIN OF ty_f4,
txt04 TYPE tj02t-txt04,
txt30 TYPE tj02t-txt30,
END OF ty_f4.
types : begin of ty_sta,
istat type tj02t-istat,
objnr type jest-objnr,
end of ty_sta.
data : int_sta type table of ty_sta with header line.
DATA : int_f4 TYPE TABLE OF ty_f4 WITH HEADER LINE.
DATA: int_pdf TYPE TABLE OF tline WITH HEADER LINE. "TABLE FOR PDF CONVERSION
DATA: int_wrap TYPE TABLE OF ty_wrap WITH HEADER LINE. "TABLE FOR LONGTEXT
DATA: int_wrap2 TYPE TABLE OF ty_wrap2 WITH HEADER LINE. "TABLE FOR STATUS
DATA: int_temp TYPE TABLE OF ty_temp WITH HEADER LINE. "Table for concatenation of system status.
DATA: int_aufk TYPE TABLE OF ty_aufk WITH HEADER LINE.
DATA: int_tj02t TYPE TABLE OF ty_tj02t WITH HEADER LINE.
DATA: int_tline TYPE STANDARD TABLE OF tline WITH HEADER LINE. "TABLE FOR READ_TEXT.
DATA : int_fld TYPE TABLE OF dfies ,wa_fld LIKE LINE OF int_fld. " Field Type for FM for F4 help
DATA :int_return TYPE TABLE OF ddshretval WITH HEADER LINE .
DATA:
loc_print_parms LIKE pri_params, "PRINT PARAMETERS
loc_valid(1) TYPE c,
loc_file type SDOK_CHTRD,
loc_bytecount TYPE i, "NUMBER OF BYTES TRANSFERRED
loc_length TYPE i, "LINE-LENGTH
loc_rqident LIKE tsp01-rqident, "SPOOL NUMBER
loc_rq2name(12) TYPE c.
DATA: loc_filename LIKE rlgrap-filename. "FILENAME
DATA:loc_repid LIKE sy-repid, " Report to execute
loc_linsz LIKE sy-linsz VALUE 115, " Line size
loc_paart LIKE sy-paart VALUE 'X_65_132'. " Paper Format
Include ZIMPR_PERFORMS_WRAP----
*& Include ZIMPR_PERFORMS_WRAP
*& Form f_top_page
top-of the page
--> p1 text
<-- p2 text
FORM f_top_page .
*--HEADER--
FORMAT COLOR 1 .
WRITE : text-010.
FORMAT COLOR 1 OFF.
WRITE : / text-011,sy-datum NO-GAP.
WRITE : / text-012,sy-uzeit NO-GAP,90 text-013,101 sy-uname.
ULINE .
FORMAT COLOR 1 INTENSIFIED OFF .
WRITE : 1 sy-vline, "HEADINGS
2 text-014 NO-GAP,
7 sy-vline,
8 text-015 NO-GAP,
20 sy-vline,
21 text-016 NO-GAP,
76 sy-vline,
77 text-017 NO-GAP,
88 sy-vline,
89 text-018 NO-GAP,
115 sy-vline.
WRITE : /1 sy-vline,
2 text-019 NO-GAP,7 sy-vline,
20 sy-vline,76 sy-vline,77 text-020 NO-GAP,88 sy-vline,115 sy-vline.
ULINE.
FORMAT COLOR 1 OFF.
ENDFORM. " f_top_page
*& Form f_data_retrieval
select statements
--> p1 text
<-- p2 text
FORM f_data_retrieval .
SELECTING ORDER TYPE,ORDER NO.,OBJECT NO. AND BASIC START DATE
SELECT p~aufnr
p~auart
p~objnr
p~ktext
r~gstrp
FROM ( aufk AS p INNER JOIN afko AS r ON raufnr = paufnr )
INTO TABLE int_aufk
WHERE p~aufnr IN s_order AND
p~auart IN s_ordert AND
r~gstrp IN s_bdate AND
p~objnr LIKE wf_objnr.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
SORT int_aufk BY aufnr.
DELETE ADJACENT DUPLICATES FROM int_aufk.
SELECT q~istat
p~objnr
FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
INTO TABLE int_sta
FOR ALL ENTRIES IN int_aufk
WHERE p~objnr = int_aufk-objnr
AND q~txt04 IN s_status and
q~spras = wf_langu and
p~inact = ''.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
SORT int_sta BY objnr.
DELETE ADJACENT DUPLICATES FROM int_sta.
*--SELECTING OBJECT NO.,STATUS AND LANGUAGE--
IF int_sta[] IS NOT INITIAL.
SELECT p~objnr
q~txt04
q~istat
q~spras
FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
INTO TABLE int_tj02t
FOR ALL ENTRIES IN int_sta
WHERE p~inact = '' AND
p~objnr = int_sta-objnr AND
q~spras = wf_langu AND
q~txt04 IN s_status AND
p~objnr LIKE wf_objnr.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
ENDIF.
ENDFORM. " f_data_retrieval
*& Form f_report_display
report display
--> p1 text
<-- p2 text
FORM f_report_display .
LOOP AT int_tj02t. "concatenating the status into a internal table
AT NEW objnr.
CLEAR int_temp-status.
ENDAT.
CONCATENATE int_temp-status int_tj02t-txt04 INTO int_temp-status SEPARATED BY space.
AT END OF objnr.
int_temp-objnr = int_tj02t-objnr. "key field.
APPEND int_temp.
CLEAR int_temp.
ENDAT.
CLEAR int_tj02t.
ENDLOOP.
LOOP AT int_aufk.
CONCATENATE sy-mandt int_aufk-aufnr INTO wf_name . "concatenating client number and order number
*--THIS FM CAPTURES THE LONG TEXT AND STORES IT IN INTERNAL TABLE--
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = wf_kopf "TEXT ID
language = sy-langu "LANGUAGE
name = wf_name "TEXT NAME
object = wf_aufk "TEXT OBJECT
TABLES
lines = int_tline "LINES OF LONG TEXT.
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
int_tline-tdline = int_aufk-ktext.
APPEND int_tline.
CLEAR :int_tline.
ENDIF.
LOOP AT int_tline.
*--THIS FM WRAPS THE LONG TEXT INTO 54 CHARACTERS EACH--
CALL FUNCTION 'RKD_WORD_WRAP'
EXPORTING
textline = int_tline-tdline "LONG TEXT LINE
outputlen = 54 "OUTPUT LENGTH
TABLES
out_lines = int_wrap "INTERNAL TABLE
EXCEPTIONS
outputlen_too_large = 1
OTHERS = 2.
IF sy-subrc <> 0.
CLEAR :int_tline.
ENDIF.
ENDLOOP.
*-- THIS FM WRAPS THE STATUS INTO 25 CHARACTERS EACH--
READ TABLE int_temp WITH KEY objnr = int_aufk-objnr.
CALL FUNCTION 'RKD_WORD_WRAP'
EXPORTING
textline = int_temp-status
outputlen = 25
TABLES
out_lines = int_wrap2
EXCEPTIONS
outputlen_too_large = 1
OTHERS = 2.
IF sy-subrc <> 0.
CONTINUE.
ENDIF.
IF NOT int_wrap2[] IS INITIAL.
ULINE AT (115).
ENDIF.
DESCRIBE TABLE int_wrap LINES wf_i2. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP
DESCRIBE TABLE int_wrap2 LINES wf_i1. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP2
WHILE ( wc_i1 LE wf_i1 OR wc_i2 LE wf_i2 ).
IF ( wc_i2 LE wf_i2 ).
READ TABLE int_wrap INDEX wc_i2 . "READING THE INTERNAL TABLE INT_WRAP WITH INDEX
wc_i2 = wc_i2 + 1.
ENDIF.
IF ( wc_i1 LE wf_i1 ).
READ TABLE int_wrap2 INDEX wc_i1 . "READING THE INTERNAL TABLE INT_WRAP2 WITH INDEX
wc_i1 = wc_i1 + 1.
ENDIF.
*--THIS FM CONVERTS THE DATE FROM SYSTEM FORMAT TO OUTPUT FORMAT--
CALL FUNCTION 'CONVERSION_EXIT_SDATE_OUTPUT'
EXPORTING
input = int_aufk-gstrp
IMPORTING
output = wf_date1.
IF NOT int_wrap2[] IS INITIAL .
*--REPORT DISPLAY--
WRITE : /1 sy-vline, 2 int_aufk-auart COLOR = 4 INTENSIFIED OFF NO-GAP ,
7 sy-vline ,8 int_aufk-aufnr COLOR = 4 INTENSIFIED OFF NO-GAP,
20 sy-vline,21 int_wrap-line,
76 sy-vline ,77 wf_date1 ,
88 sy-vline ,89 int_wrap2-line,
115 sy-vline.
*--CLEARING THE VARIABLES--
wf_date1 = ''.
CLEAR: int_aufk,int_temp,int_wrap2-line,int_wrap-line.
ENDIF.
ENDWHILE.
wc_i1 = 1.
wc_i2 = 1.
CLEAR :int_wrap,int_wrap2.
REFRESH : int_wrap,int_wrap2,int_tline.
ENDLOOP.
ULINE AT (115).
ENDFORM. " f_report_display
*& Form F_PDF_DISPLAY
pdf conversion
--> p1 text
<-- p2 text
FORM f_pdf_display .
*--THIS FM CONVERTS THE SPOOL REQUEST INTO PDF REPORT--
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = wf_id "SPOOL NUMBER
no_dialog = space
pdf_destination = 'X'
IMPORTING
pdf_bytecount = loc_bytecount "NUMBER OF BYTES TRANSFERRED
TABLES
pdf = int_pdf "TABLE FOR PDF REPORT
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
ENDFORM. " F_PDF_DISPLAY
*& Form f_download_local
download to local system
--> p1 text
<-- p2 text
FORM f_download_local .
---------------------THIS FM DOWNLOADS THE PDF REPORT INTO LOCAL MACHINE
data loc_ret TYPE iwerrormsg.
CALL FUNCTION 'IW_C_GET_SAPWORKDIR'
IMPORTING
SAPWORKDIR = loc_file
ERROR_MSG = loc_ret
loc_filename = loc_file.
if loc_ret is initial.
concatenate loc_filename '\work order header long text_ ' sy-timlo '.pdf' into loc_filename.
endif.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
bin_filesize = loc_bytecount "NO. OF BYTES
filename = loc_filename "DEFAULT FILE NAME
filetype = 'BIN'
IMPORTING
act_filename = loc_filename
TABLES
data_tab = int_pdf.
ENDFORM. " f_download_local
if you have any doubts,,
please revert
Regards,
Talwinder -
How to copy exitsitng extracter into another new extracter?
Hello,
Please some one can tel me how to copy the existing extracter into another new extracter.
I have requirment as below
Currect me if i am wrong ,need to enhance the existing extracter and add some new fields,and need to include some masterdata filds also to it.
For master data i am going to do write routines at Transfermation so that no need to include in my exter for those filds to extracter.
Please some one guide me in this scenario.
ChrsHi,
you do not have to copy the extractor, you can enhance it with fields and fill them via enhancement coding --> rsa6.
If you want to copy it, you need to check what kind of extractor you have. Is it a function module or just a table extractor.
for fm: copy the function module via se37 and copy the extract structure via se11. Add your enhancements in the copied structures and coding. Create a new datasource with rso2.
for table extractor: create a view adding the additionally needed fields. create a new ds with rso2. Surely you need to add some coding in the relevant enhancement.
regards
Siggi -
How to add a report into the tree??
Hi all,
Pls help me add a report into the tree same as standard report that we can click icon on tree to run.
Thank you!Hi,
use FM HR_ALV_HIERSEQ_LIST_DISPLAY
there are 2 internal table , one for header and one for detail
below is code for reference
REPORT zinsd_quot_cont.
TYPES : BEGIN OF ty_vbak,
vbeln TYPE vbeln_va,
vkorg TYPE vkorg,
vtweg TYPE vtweg,
spart TYPE spart,
vkbur TYPE vkbur,
vkgrp TYPE vkgrp,
angdt TYPE angdt_v,
bnddt TYPE bnddt,
kunnr TYPE kunnr,
kwmeng TYPE kwmeng,
meins TYPE meins,
kunwe TYPE kunnr,
name1 TYPE name1_gp ,
name2 TYPE name1_gp ,
sel(1),
expand(1),
salesdocument TYPE bapivbeln-vbeln,
message TYPE bapi_msg,
END OF ty_vbak.
DATA : w_vbak TYPE ty_vbak,
t_vbak TYPE TABLE OF ty_vbak.
DATA : w_update TYPE ty_vbak,
t_update TYPE TABLE OF ty_vbak.
TYPES : BEGIN OF ty_kna1,
kunnr TYPE kunnr,
name1 TYPE name1_gp ,
END OF ty_kna1.
DATA : w_kna1 TYPE ty_kna1,
t_kna1 TYPE TABLE OF ty_kna1.
TYPES : BEGIN OF ty_vbap,
vbeln TYPE vbeln_va,
posnr TYPE posnr_va,
matnr TYPE matnr,
matkl TYPE matkl,
werks TYPE werks_ext,
kwmeng TYPE kwmeng,
meins TYPE meins,
mvgr5 TYPE mvgr5,
maktx TYPE maktx,
END OF ty_vbap.
DATA : w_vbap TYPE ty_vbap,
t_vbap TYPE TABLE OF ty_vbap.
TYPES : BEGIN OF ty_makt,
matnr TYPE matnr,
maktx TYPE maktx,
END OF ty_makt.
DATA : w_makt TYPE ty_makt,
t_makt TYPE TABLE OF ty_makt.
TYPES : BEGIN OF ty_sum,
vbeln TYPE vbeln_va,
kwmeng TYPE kwmeng,
END OF ty_sum.
DATA : w_sum TYPE ty_sum,
t_sum TYPE TABLE OF ty_sum.
TYPES : BEGIN OF ty_vbpa,
vbeln TYPE vbeln,
posnr TYPE posnr,
parvw TYPE parvw,
kunnr TYPE kunnr,
END OF ty_vbpa.
DATA : w_vbpa TYPE ty_vbpa,
t_vbpa TYPE TABLE OF ty_vbpa.
TYPES : BEGIN OF ty_vbup,
vbeln TYPE vbeln,
posnr TYPE posnr ,
gbsta TYPE gbsta ,
END OF ty_vbup.
DATA : w_vbup TYPE ty_vbup,
t_vbup TYPE TABLE OF ty_vbup.
TYPE-POOLS slis.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv,
w_fieldcatalog TYPE slis_fieldcat_alv,
w_layout TYPE slis_layout_alv,
gs_keyinfo TYPE slis_keyinfo_alv.
DATA: g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
DATA : g_lines TYPE i.
*Selection Screen
TABLES : vbak,vbap.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS s_vkorg FOR vbak-vkorg. " Sales Org
SELECT-OPTIONS s_vtweg FOR vbak-vtweg. " Dist Channel
SELECT-OPTIONS s_spart FOR vbak-spart. " Division
SELECT-OPTIONS s_vkbur FOR vbak-vkbur. " Sales Off
SELECT-OPTIONS s_vkgrp FOR vbak-vkgrp. " Sales Grp
SELECT-OPTIONS s_matkl FOR vbap-matkl. " Mat Grp
SELECT-OPTIONS s_werks FOR vbap-werks. " Plant
SELECT-OPTIONS s_period FOR vbak-angdt. " Sales Off
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
PERFORM f_getdata.
PERFORM f_initdata.
END-OF-SELECTION.
PERFORM f_createalv.
PERFORM f_dispalv.
*& Form f_getdata
text
--> p1 text
<-- p2 text
FORM f_getdata .
*Sales Header
SELECT
vbeln
vkorg
vtweg
spart
vkbur
vkgrp
angdt
bnddt
kunnr
INTO TABLE t_vbak
FROM vbak
WHERE
vkorg IN s_vkorg " Sales Org
AND vtweg IN s_vtweg " Dist Channel
AND spart IN s_spart " Division
AND vkbur IN s_vkbur " Sales Off
AND vkgrp IN s_vkgrp " Sales Grp
AND angdt IN s_period
AND bnddt IN s_period
AND auart = 'ZQMO'
AND vbtyp = 'B'.
*CUST NAME
SELECT
kunnr
name1
INTO TABLE t_kna1
FROM kna1
FOR ALL ENTRIES IN t_vbak
WHERE
kunnr = t_vbak-kunnr
*Sales Item
SELECT
vbeln
posnr
matnr
matkl
werks
kwmeng
meins
mvgr5
INTO TABLE t_vbap
FROM vbap
FOR ALL ENTRIES IN t_vbak
WHERE
vbeln = t_vbak-vbeln
AND matkl IN s_matkl " Mat Grp
AND werks IN s_werks " Plant
*Partners
SELECT
vbeln
posnr
parvw
kunnr
INTO TABLE t_vbpa
FROM vbpa
FOR ALL ENTRIES IN t_vbak
WHERE
vbeln = t_vbak-vbeln.
IF t_vbpa[] IS NOT INITIAL.
SELECT
kunnr
name1
APPENDING TABLE t_kna1
FROM kna1
FOR ALL ENTRIES IN t_vbpa
WHERE
kunnr = t_vbpa-kunnr
ENDIF.
*Status - Sales Doc
SELECT
vbeln
posnr
gbsta
INTO TABLE t_vbup
FROM vbup
FOR ALL ENTRIES IN t_vbap
WHERE
vbeln = t_vbap-vbeln
AND posnr = t_vbap-posnr
AND gbsta NE 'C'.
SELECT
matnr
maktx
INTO TABLE t_makt
FROM makt
FOR ALL ENTRIES IN t_vbap
WHERE
matnr = t_vbap-matnr
AND spras = 'E'.
ENDFORM. " f_getdata
*& Form f_initdata
text
--> p1 text
<-- p2 text
FORM f_initdata .
SORT t_vbap BY vbeln DESCENDING.
*delete all closed stat items
LOOP AT t_vbap INTO w_vbap.
READ TABLE t_vbup INTO w_vbup
WITH KEY
vbeln = w_vbap-vbeln
posnr = w_vbap-posnr.
IF sy-subrc <> 0.
DELETE t_vbap.
CONTINUE.
ELSE.
READ TABLE t_makt INTO w_makt
WITH
KEY matnr = w_vbap-matnr.
IF sy-subrc = 0.
w_vbap-maktx = w_makt-maktx.
MODIFY t_vbap FROM w_vbap.
ENDIF.
ENDIF.
ENDLOOP.
*find the total quantity
LOOP AT t_vbap INTO w_vbap.
w_sum-vbeln = w_vbap-vbeln.
w_sum-kwmeng = w_vbap-kwmeng.
COLLECT w_sum INTO t_sum.
CLEAR w_sum.
ENDLOOP.
*populate header
LOOP AT t_vbak INTO w_vbak.
Quantity - Total
READ TABLE t_sum INTO w_sum
WITH KEY
vbeln = w_vbak-vbeln.
IF sy-subrc = 0.
w_vbak-kwmeng = w_sum-kwmeng.
ELSE.
CLEAR w_vbak-kwmeng.
ENDIF.
UoM
READ TABLE t_vbap INTO w_vbap
WITH KEY
vbeln = w_vbak-vbeln.
IF sy-subrc = 0.
w_vbak-meins = w_vbap-meins.
ELSE.
CLEAR w_vbak-meins.
ENDIF.
Partner
READ TABLE t_vbpa INTO w_vbpa
WITH KEY
vbeln = w_vbak-vbeln
parvw = 'WE'.
IF sy-subrc = 0.
w_vbak-kunwe = w_vbpa-kunnr.
ELSE.
CLEAR w_vbak-kunwe.
ENDIF.
SHIP TO PARTY NAME
READ TABLE t_kna1 INTO w_kna1
WITH KEY
kunnr = w_vbak-kunwe.
IF sy-subrc = 0.
w_vbak-name2 = w_kna1-name1.
ENDIF.
CUST NAM - SOLD TO PARTY
READ TABLE t_kna1 INTO w_kna1
WITH KEY
kunnr = w_vbak-kunnr.
IF sy-subrc = 0.
w_vbak-name1 = w_kna1-name1.
ENDIF.
MODIFY t_vbak FROM w_vbak.
ENDLOOP.
DELETE t_vbak WHERE kwmeng IS INITIAL.
SORT t_vbak BY vbeln DESCENDING.
SORT t_vbap BY vbeln DESCENDING posnr ASCENDING.
ENDFORM. " f_initdata
*& Form f_createalv
Create Field Cat.
--> p1 text
<-- p2 text
FORM f_createalv .
g_tabname_header = 't_vbak'.
g_tabname_item = 't_vbap' .
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'VBELN'.
gs_keyinfo-item01 = 'VBELN'.
*VBAK
w_fieldcatalog-fieldname = 'VBELN'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Document'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKORG'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Org'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VTWEG'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Dist Channel'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'SPART'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Division'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKBUR'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Office'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKGRP'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales GRP'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KUNNR'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sold to Party'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'NAME1'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-outputlen = 35.
w_fieldcatalog-seltext_l = 'Sold to Party Code - Name'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KUNWE'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Ship to Party'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'NAME2'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Ship Party Code - Name'.
w_fieldcatalog-outputlen = 35.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KWMENG'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Quantity'.
w_fieldcatalog-outputlen = 25.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MEINS'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'UoM'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'SALESDOCUMENT'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Document'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MESSAGE'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Log'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
*VBAP
w_fieldcatalog-fieldname = 'POSNR'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'POS'.
w_fieldcatalog-outputlen = 6.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MATNR'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material'.
w_fieldcatalog-outputlen = 18.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MAKTX'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material Desc'.
w_fieldcatalog-outputlen = 40.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MATKL'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material Grp'.
w_fieldcatalog-outputlen = 9.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MVGR5'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'MCNO'.
w_fieldcatalog-outputlen = 4.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'WERKS'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Plant'.
w_fieldcatalog-outputlen = 91.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KWMENG'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Quantity'.
w_fieldcatalog-outputlen = 25.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MEINS'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'UoM'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
LAYOUT
w_layout-colwidth_optimize = 'X'.
w_layout-zebra = 'X'.
w_layout-expand_fieldname = 'EXPAND'.
w_layout-box_fieldname = 'SEL'.
w_layout-box_tabname = 't_vbak'.
ENDFORM. " f_createalv
*& Form f_dispalv
Call ALV
--> p1 text
<-- p2 text
FORM f_dispalv .
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
is_layout = w_layout
it_fieldcat = t_fieldcatalog
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
is_keyinfo = gs_keyinfo
TABLES
t_outtab_header = t_vbak
t_outtab_item = t_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
ENDIF.
ENDFORM. " f_dispalv
*& Form set_pf_status
PF stat
-->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZINSD_QUOT_CONT_ST'.
ENDFORM. "set_pf_status
*& Form user_command
Process List UCOMM
-->R_UCOMM text
-->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
REFRESH t_update.
IF r_ucomm = 'EXIT'.
LEAVE PROGRAM.
ENDIF.
IF r_ucomm = 'EXECUTE'.
LOOP AT t_vbak INTO w_update
WHERE
sel = 'X'
AND salesdocument = ' '.
APPEND w_update TO t_update.
ENDLOOP.
IF t_update[] IS NOT INITIAL.
LOOP AT t_update INTO w_update.
PERFORM f_bapi_contract_createfromdata USING w_update.
PERFORM f_bdc_contract_from_quotation.
MODIFY t_update FROM w_update.
ENDLOOP.
ELSE.
ENDIF.
PERFORM f_dispalv.
ENDIF.
IF r_ucomm = '&IC1'.
IF rs_selfield-sel_tab_field = 't_vbak-VBELN'.
SET PARAMETER ID 'AGN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA23' AND SKIP FIRST SCREEN.
ENDIF.
IF rs_selfield-sel_tab_field = 't_vbak-SALESDOCUMENT' AND
rs_selfield-value NE ' '.
SET PARAMETER ID 'KTN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
ENDIF.
ENDIF.
ENDFORM. "user_command
*& Form F_BAPI_CONTRACT_CREATEFROMDATA
BAPI CALL
-->P_W_UPDATE text
FORM f_bapi_contract_createfromdata USING p_w_update STRUCTURE w_update .
DATA : w_contract_header_in TYPE bapisdhd1 ,
w_contract_header_inx TYPE bapisdhd1x ,
t_contract_items_in TYPE TABLE OF bapisditm WITH HEADER LINE,
t_contract_items_inx TYPE TABLE OF bapisditmx WITH HEADER LINE,
t_contract_partners TYPE TABLE OF bapiparnr WITH HEADER LINE,
t_return TYPE TABLE OF bapiret2 WITH HEADER LINE.
CLEAR : w_contract_header_in,
w_contract_header_inx.
REFRESH : t_contract_items_in,
t_contract_items_inx,
t_contract_partners,
t_return.
w_contract_header_in-doc_type = 'ZCNT'.
w_contract_header_in-sales_org = p_w_update-vkorg.
w_contract_header_in-distr_chan = p_w_update-vtweg.
w_contract_header_in-division = p_w_update-spart.
w_contract_header_in-ct_valid_f = p_w_update-angdt.
w_contract_header_in-ct_valid_t = p_w_update-bnddt.
w_contract_header_inx-doc_type = 'X'.
w_contract_header_inx-sales_org = 'X'.
w_contract_header_inx-distr_chan = 'X'.
w_contract_header_inx-division = 'X'.
w_contract_header_inx-ct_valid_f = 'X'.
w_contract_header_inx-ct_valid_t = 'X'.
LOOP AT t_vbap INTO w_vbap
WHERE
vbeln = p_w_update-vbeln.
t_contract_items_in-material = w_vbap-matnr.
t_contract_items_in-plant = w_vbap-werks.
t_contract_items_in-target_qty = w_vbap-kwmeng.
t_contract_items_in-target_qu = w_vbap-meins.
t_contract_items_in-ref_doc = w_vbap-vbeln.
t_contract_items_in-ref_doc_it = w_vbap-posnr.
t_contract_items_in-ref_doc_ca = 'B'.
t_contract_items_in-prc_group5 = w_vbap-mvgr5.
t_contract_items_inx-material = 'X'.
t_contract_items_inx-plant = 'X'.
t_contract_items_inx-target_qty = 'X'.
t_contract_items_inx-target_qu = 'X'.
t_contract_items_inx-ref_doc = 'X'.
t_contract_items_inx-ref_doc_it = 'X'.
t_contract_items_inx-ref_doc_ca = 'X'.
t_contract_items_inx-prc_group5 = 'X'.
APPEND t_contract_items_in.
APPEND t_contract_items_inx.
ENDLOOP.
LOOP AT t_vbpa INTO w_vbpa
WHERE
vbeln = p_w_update-vbeln.
AND posnr = w_vbap-posnr.
t_contract_partners-partn_role = w_vbpa-parvw.
t_contract_partners-partn_numb = w_vbpa-kunnr.
t_contract_partners-itm_number = w_vbpa-posnr.
APPEND t_contract_partners.
ENDLOOP.
CALL FUNCTION 'BAPI_CONTRACT_CREATEFROMDATA'
EXPORTING
SALESDOCUMENTIN =
contract_header_in = w_contract_header_in
contract_header_inx = w_contract_header_inx
SENDER =
BINARY_RELATIONSHIPTYPE = ' '
INT_NUMBER_ASSIGNMENT = ' '
BEHAVE_WHEN_ERROR = ' '
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
salesdocument = p_w_update-salesdocument
TABLES
return = t_return
contract_items_in = t_contract_items_in
contract_items_inx = t_contract_items_inx
contract_partners = t_contract_partners
CONTRACT_CONDITIONS_IN =
CONTRACT_CONDITIONS_INX =
CONTRACT_CFGS_REF =
CONTRACT_CFGS_INST =
CONTRACT_CFGS_PART_OF =
CONTRACT_CFGS_VALUE =
CONTRACT_CFGS_BLOB =
CONTRACT_CFGS_VK =
CONTRACT_CFGS_REFINST =
CONTRACT_DATA_IN =
CONTRACT_DATA_INX =
CONTRACT_TEXT =
CONTRACT_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
IF p_w_update-salesdocument NE ' ' .
p_w_update-message = 'SUCCESS'.
ELSE.
READ TABLE t_return INDEX 1.
p_w_update-message = t_return-message.
ENDIF.
READ TABLE t_vbak INTO w_vbak
WITH KEY
vbeln = p_w_update-vbeln.
IF sy-subrc = 0.
MODIFY t_vbak INDEX sy-tabix FROM p_w_update .
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDFORM. " F_BAPI_CONTRACT_CREATEFROMDATA
*& Form f_bdc_contract_from_Quotation
BAPI CALL
-->P_W_UPDATE text
FORM f_bdc_contract_from_quotation.
DATA : l_date TYPE char10.
REFRESH : messtab, bdcdata.
CLEAR : messtab, bdcdata.
PERFORM bdc_dynpro USING 'SAPMV45A' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=COPY'.
PERFORM bdc_field USING 'VBAK-AUART'
'ZCNT'.
PERFORM bdc_dynpro USING 'SAPLV45C' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=RANG'.
PERFORM bdc_dynpro USING 'SAPLV45C' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UEBR'.
PERFORM bdc_field USING 'LV45C-VBELN'
w_update-vbeln.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
IF NOT w_update-angdt IS INITIAL.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
date_internal = w_update-angdt
IMPORTING
date_external = l_date
EXCEPTIONS
date_internal_is_invalid = 1
OTHERS = 2.
PERFORM bdc_field USING 'VBAK-GUEBG'
l_date.
ENDIF.
IF NOT w_update-bnddt IS INITIAL.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
date_internal = w_update-bnddt
IMPORTING
date_external = l_date
EXCEPTIONS
date_internal_is_invalid = 1
OTHERS = 2.
PERFORM bdc_field USING 'VBAK-GUEEN'
l_date.
ENDIF.
CALL TRANSACTION 'VA41' USING bdcdata
MODE 'E'
UPDATE 'S'
MESSAGES INTO messtab.
break abap.
READ TABLE messtab WITH KEY msgid = 'V1'
msgnr = '311'.
IF sy-subrc EQ 0.
w_update-message = 'SUCCESS'.
w_update-salesdocument = messtab-msgv2.
ELSE.
READ TABLE messtab WITH KEY msgtyp = 'E'.
IF sy-subrc EQ 0.
DATA : l_info TYPE einfo.
CLEAR l_info.
l_info-msgid = messtab-msgid.
l_info-msgty = messtab-msgtyp.
l_info-msgno = messtab-msgnr.
l_info-msgv1 = messtab-msgv1.
l_info-msgv2 = messtab-msgv2.
l_info-msgv3 = messtab-msgv3.
l_info-msgv4 = messtab-msgv4.
CALL FUNCTION 'MESSAGE_GET_TEXT'
EXPORTING
ieinfo = l_info
ilangu = sy-langu
IMPORTING
etext = w_update-message
EXCEPTIONS
no_t100_found = 1
OTHERS = 2.
ENDIF.
ENDIF.
READ TABLE t_vbak INTO w_vbak WITH KEY vbeln = w_update-vbeln.
IF sy-subrc = 0.
MODIFY t_vbak INDEX sy-tabix FROM w_update transporting message
salesdocument.
ENDIF.
ENDFORM. " f_bdc_contract_from_Quotation
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "bdc_dynpro
Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "bdc_field
Also, check the following:
http://www.sapdevelopment.co.uk/reporting/alv/alvtree.htm
You can get help as programs also.
hope this helps.
cheers,
Hema. -
How to Export SSRS report into Excel format using query string
Hello all,
I am new to SSRS world.
Last night i was trying to add a hyperlink on the SSRS report (.rdl) file, by clicking which we can export the report into "Excel" format, but with no luck.
Can anybody tell me how to form the hyperlink, so that we can export the report with its current content ( I mean the report content generated by selecting some parameter values)Hi Suman85,
Based on your scenario, you want to add a link on the SSRS report file, and then click it you can export the report into “Excel” format.
Just as kishan1901 said , you can add a textbox to your report and type in the words “Click here and export the report
to excel” .Then right-click the textbox and select Properties. Switch to Navigation tab, click the radiobutton of ‘Jump to URL’ and type in the expression ,here is just a example:
="http://vyof1884200/ReportServer$youhoo?/My+Adventure+Works/Product+Sales+and+Profitability+by+Month&rs:Command=Render&rs:Format=excel"
Then preview the report ,you will see
Click here and export the report to excel
when you move the mouse to it ,the mouse will become a hand ,then left-click, it will jump out a dialog box to indicate user whether the excel file should be saved , opened or canceled.
I think this is what you want, if you have any further requirement, could you please describe it in more detail? We would give you some resolution or workaround.
Regards,
Challen Foo -
How to convert Oracle reports into excel?
How can we convert Oracle reports into excel.
i know there was a thread on this topic which i am not able to find.
give the link / help.I found Std Oracle Report output to Excel Sheet has some suggestions. Not being a Reports person anymore I am not in a position to vouch for them.
How did I find this thread? By not using the forum search tool but using Google instead.
Cheers, APC -
How to add the reports into INTRANET PORTAl SITE ?
Hi everybody,
We developed reports in character mode Reports 2.5 , i wants to add all the reports into INTRANET PORTAL SITE ( OUR COMPANY PORTAL SITE ) , Can you please anyone tell me what are all the procedure to followup.
Thanks in advance.Please see chapter 5, chapter 8 and appendix C of following document on how to publish reports to Oracle Portal,
http://otn.oracle.com/docs/products/reports/htdocs/doc_library/getstart/docs/a92102_01.pdf
-Jeff -
How to convert PLD Report into Crystal Report
Hello Experts,
I want to convert my PLD Report into Crystal Report, but i am not able to find the solution ,
so how can i do this and what are the steps have to taken.
Kindly give me the solution .
Regards
RahulHi Rahul........
SAP has given a tool where you can convert your PLDs into Crystal Reports.......
Please check the below link to download tool......
http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71
Regards,
Rahul -
How to integrate BW reports into the Portal ???
Hi all,
I need to integrate the BW (3.5) Reports into the Portal. If any one has good documents could you please pass it to my e-mail id: [email protected]
Thanks in advance.Hi Venkat,
Integration of BW Components into the Portal
http://help.sap.com/saphelp_nw04/helpdata/en/a8/37e1082163c54abce581a54d6b771a/frameset.htm
Configuration for the Integration of SAP BW and SAP EP
http://help.sap.com/saphelp_nw04/helpdata/en/2f/741a403233dd5fe10000000a155106/frameset.htm
How to Integrate BW Web Applications into EP 5.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/af073962-0b01-0010-f7a4-f4c1023ed0a4
Keys for Integrating SAP BW 3.5 and SAP Enterprise Portal 6.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b1472a7-0301-0010-64bd-dc96509db6f7
Enterprise Portal Integration into BW(e-class)
https://media.sdn.sap.com/eclasses/ebw201/main.htm
Hope this helps.
Regards
Hari -
How to copy one schema into another
I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
I have a dmp file of source-schema (created daily with expdp by our backup schedule).
Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
The dmp file was created with:
expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
Create the copy on dest-schema with:
impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
(dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
If this approach is not feasible, kindly suggest me an alternative.
Thank you.
Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)Thank you both. Dean, I've made a note of your proposed command. May use it next time.
In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
First I ran these command logged in as SYS
GRANT Import Full Database TO dest-schema;
GRANT Create Any Directory TO dest-schema;
GRANT Unlimited Tablespace TO dest-schema;
impdp
dest-schema/pwd
DIRECTORY=dmpdir
DUMPFILE=myproject.dmp
REMAP_SCHEMA=source-schema:dest-schema
TABLE_EXISTS_ACTION=REPLACE
LOGFILE=implog.log
There were some errors though. The import process complained about constraints referencing non-existent primary keys.
It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
- are not part of the DUMP file
or
- are in the DUMP file but skipped during import
Don't know if this is a bug or by design behavior. -
How to subscribe the report into one excel multiple sheets in ssrs
Hi Team,
I have a requirement where i pull my report in one excel with multiple sheets,
1.I have a Emp_Report where i could subscribe my report into excel format,but here i want to subscribe this into multiple sheets in one excel form.
2.Is it possible to subscribe the two reports in one excel with mulitiple sheets.i need this also.
please guide me hw we can achive me ,so that i can start working on that .
am using sql server 2008R2 sql server edition.
pls help me out for thisHi Ychinnari,
According to your description, you want to perform subscription for one report or two reports into multiple sheets within a Excel file.
In Reporting Services, when we add a page break within the report, those pages will be exported into separated sheets in Excel.
For first requirement, subscribe one report into multiple sheets in one Excel file. We can add a page break within a group, then the report will display on multiple sheets when subscribe into Excel format.
For second requirement, subscribe one report into multiple sheets in one Excel file. You can add one report as a subreport into the main report, then add pagebreak between main report and subreport.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support
Maybe you are looking for
-
Upgrade from OEL 5.4 to OEL 5.5 . How does it work.
Hi, I am little new to Linux. We are on OEL 5.4 with Oracle Applications on 11.5.10.2 We want to upgrade to 5.5 now. Can you please tell me the steps involved in this? TIA.
-
Separate search field in Safari
Ugh, I finally got around to updating Safari. I want to add my voice to others saying just how much I HATE not having a separate search field. Seriously, I might as well just use Chrome now. Making this one field is a horrible UX idea...aren't you gu
-
hi folks, i have developed one web service in which i have thrown a SoapFault exception.i want it to see what happens on the client.i get an exception thrown but ,theres some thing called SaxParseException that also appears on the client console.also
-
WS Adapter: INTERNAL.WS_LOGICAL_PORT
Hi, I have an scenario ABAP PROXY->WS, but once the message is triggered in the proxy, i get this error as a responce payload: <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP:Body> <SOAP:Fault> <faultcod
-
White Balance Setting Errors - HELP!
I am having a problem with Aperture and wanted to find if anyone else has noticed this since the update to 3.1. I imported a batch of photos (about 75 RAW 25 JPEG) and noticed that the white balance was the same for every picture. Odd since my Nikon