How to copy and edit pages once they have been scanned to my desktop
I have a many page report I want to copy and send as one or more PDF files. I scan the page, remove it to my desktop and either slide it onto a blank pages or I Photo, where I make the print darker, etc. and export to my desktop..as file, jpeg document....tried them all.
Once on the desktop, it won't allow me to add or subtract any information...I can't even select all and copy it. I can't remember how I use to do this so I would come up with a copy that I could edit and also add several other pages to the bottom of the first page, to send as a pdf, rather than have to send each page separately.'
Is there a way to do this?
If you are at the point where you have several .jpg images that you want to turn into a single PDF document,
Open each .jpg image in Preview and Save As a PDF file.
Do that for all of them.
In Preview click on the sidebar and one image will be there.
From Finder, where reside your recently converted .jpgs to single PDFs drag one to be underneath the existing one and so forth untill all single PDFs are showing in the sidebar.
Get the focus back on Preview by clicking on it, and then Save As and that will produce one multi-page PDF document.
Note, The last image you converted will be the first image in the new PDF, so you might like to close Preview and then reopen it with the first image, just to make sure you get them in the desired order.
Mac OS 10.6.8
Preview 5.0.3
Similar Messages
-
In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?
In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?
Emma,
Take a look at the troubleshooting tips on this page from the Infosemantics website:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/troubleshooting-widg et-issues
Pay particular attention to the section entitled: "My drag and drop question works correctly sometimes, but not other times. "
From the appearance of your slide, it looks like you may have removed some of the components from the quiz slide that are necessary for it to function correctly. Try the test that this section of the troubleshooting suggests so that you can see if this is the case. If it turns out that you have deleted some items, you'll need to recreate your quiz slide to get them back again.
Hope this helps. -
Can i put photos back into the camera chip once they have been imported into my mac?
Can i put photos back into the camera chip once they have been imported to my Mac?
Export them
File -> Export
to a folder on the desktop. From there copy them back to your camera.
Remember, the camera has a quite specific set up of folders, and you'll need to put the files back in the correct place for them to be viewable on the camera.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
I have been taking screenshots on my mac book pro and they have been saving to my desktop. However when i try to move them into a folder, they don't move at all! I have changed my setting in view options to 'none' but they still don't move?
Got to your Desktop folder in the Finder sidebar, command i will open the info pane.
What are your permissions here? Unlock the pad lock and Change to read write.
Are you experiencing other problems?
Reset Home Directory Permissions and ACLs
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/ -
Moving answers in a quiz once they have been matched to a target in using drag and drop
Hi,
I am having a problem with some of my drag and drop quizzes that I'm wondering if anyone you might be able to help me with?
In some drag and drop quizzes I have created, using the Infosemantics drag and drop light widget in Captivate 5.5, I can move the answer after having matched it to a target but before submittting. Whereas in some quizzes I have created, the answers get stuck and do not let me move the answers after I have matched them to a target, even though I haven't submitted. This leaves me no choice but to clear all my answers and start again if I have made a mistake.
Please can you tell me how to enable the answers to move even after they have been placed on a target?Emma,
Take a look at the troubleshooting tips on this page from the Infosemantics website:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/troubleshooting-widg et-issues
Pay particular attention to the section entitled: "My drag and drop question works correctly sometimes, but not other times. "
From the appearance of your slide, it looks like you may have removed some of the components from the quiz slide that are necessary for it to function correctly. Try the test that this section of the troubleshooting suggests so that you can see if this is the case. If it turns out that you have deleted some items, you'll need to recreate your quiz slide to get them back again.
Hope this helps. -
I want to load my photos onto my MacBook Pro, sort them into albums and not have them appear in other locations. If I go to Photos all of the photos in the computer seem to appear. I can't tell if they have been put in an Album or have been edited. Is there a simpler system that I can use.
iPhoto works similarly to iTunes. In iTunes, every track is in the Library and each playlist is a sub-set of the Library.
So, in iPhoto, every image is in the Library and each Album is a subset of the Library. So, your photos will always be visible in the Library and in any album you use them in. That - of course - means that any image can ne used in a multitude of albums, and use no extra disk space. So that shot of your son, daughter and their puppy can be in the Son album, Daughter album, Puppy Album and even a favourites album.
Photos and Events are simply two views of the Library - two doors to the same room as it were.
It's easy to find photos not in an Album - with a Smart Album:
File -> New Smart Album
Album -> is not -> any
and another will find Photos not editoed:
File -> New Smart Album
Photo -> is -> Edited.
As you edit a photo, or add it to an album, they will be dropped from the Smart Album. -
I've been cropping and editing pics in my MacBook Pro but once I try to transfer them to the iPhone or iPad 2 only the photos that have not been manipulated transfer with no problems. How do I solve this problem?
Option 1:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
If that fails:
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Use the option to check and repair library permissions
Regards
TD -
Don't show rows in the dialog once they have been selected
Hi All,
This is more of an approach oriented question rather a technical issue.
I am using ADF-BC-JSF Jdeveloper 10.1.3.3.
I have 2 master entities and VOs - Employee and ProjectsMaster. Each Employee can work on multiple projects for which I have a 3rd entity and VO EmpProjectRelation. I have designed a page EmployeeDetail that shows details of an employee along with all his projects (using EmpProjectRelation, also mapped to ProjectsEntity to show Project Name and Location) in a table through a view link (Employee ->EmpProjectRelation).
New projects can be added to this Employee by clicking on Add Button that displays dialog page and all the available projects from the ProjectsMaster VO. Now I multi-select the projects and clcik Submit.
The projects get reflected to the parent page although not Refreshing table of 2 VOs after a dialog but my concern is how should I prevent the selected projects being shown again in the dialog box. It should show only those projects which are not selected yet.
Any ideas?? Any Approaches?? Any directions??
Regards,
NeerajBump!
-
I purchased Karma yoga by yoga specialists from the pure yoga moods album, Om by Wade Irme Morrissette, Sattvam on Asana 2, Ganesh Mahatmantra on Sacred morning chants.
They have all be errased from my computer. Is there any way someone can help me retrieve them or re-download them?
Thank youIf you are in a country where music can be redownloaded, and you haven't changed countries since buying them and they are still in your country's store (and they aren't hidden), then you should be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage. If they show there but don't have the cloud symbol against them for redownloading then do you still have them listed in the Music part of your library ? If you do then deleting them from Music should then give you the cloud symbol against them in Purchased for redownloading.
If you can't redownload them then do you have them on your backup of your library/downloads so that you can copy them back onto your library ? Or do you have them on your iOS device - you should be able to copy them back it via File > Devices > Transfer Purchases (though again, if you have them listed in the Music part of your library then you will need to delete them from there before Transfer Purchases will work). -
I want to copy an idoc of basic type ORDERS05, then change the material number and bring it into SAP could someone guide me how I can do it. If possible please suggest more than one ways because I dont have authorization to some of the transactions in WEDI. Will certainly give points for right answer. Thanks for reading.
Hi,
Please find the following steps to edit IDOC segment after you find the error using WE02.
The example codes can be found in website
http://www.sapgenie.com/sapedi/idoc_abap.htm
STEP 1 - Open document to edit
CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_EDIT'
EXPORTING
document_number = t_docnum
IMPORTING
idoc_control = itab_edidc
TABLES
idoc_data = itab_edidd
EXCEPTIONS
document_foreign_lock = 1
document_not_exist = 2
document_not_open = 3
status_is_unable_for_changing = 4
OTHERS = 5.
STEP 2 - Loop at itab_edidd and change data
LOOP AT itab_edidd WHERE segnam = 'E1EDKA1'.
e1edka1 = itab_edidd-sdata.
IF e1edka1-parvw = 'LF'.
e1edka1-partn = t_eikto.
itab_edidd-sdata = e1edka1.
MODIFY itab_edidd.
EXIT.
ENDIF.
ENDLOOP.
STEP 3 - Change data segments
CALL FUNCTION 'EDI_CHANGE_DATA_SEGMENTS'
TABLES
idoc_changed_data_range = itab_edidd
EXCEPTIONS
idoc_not_open = 1
data_record_not_exist = 2
OTHERS = 3.
STEP 3a - Change control record
CALL FUNCTION 'EDI_CHANGE_CONTROL_RECORD'
EXPORTING
idoc_changed_control = itab_edidc
EXCEPTIONS
idoc_not_open = 1
direction_change_not_allowed = 2
OTHERS = 3.
STEP 4 - Close Idoc
Update IDoc status
CLEAR t_itab_edids40.
t_itab_edids40-docnum = t_docnum.
t_itab_edids40-status = '51'.
t_itab_edids40-repid = sy-repid.
t_itab_edids40-tabnam = 'EDI_DS'.
t_itab_edids40-mandt = sy-mandt.
t_itab_edids40-stamqu = 'SAP'.
t_itab_edids40-stamid = 'B1'.
t_itab_edids40-stamno = '999'.
t_itab_edids40-stapa1 = 'Sold to changed to '.
t_itab_edids40-stapa2 = t_new_kunnr.
t_itab_edids40-logdat = sy-datum.
t_itab_edids40-logtim = sy-uzeit.
APPEND t_itab_edids40.
CALL FUNCTION 'EDI_DOCUMENT_CLOSE_EDIT'
EXPORTING
document_number = t_docnum
do_commit = 'X'
do_update = 'X'
write_all_status = 'X'
TABLES
status_records = t_itab_edids40
EXCEPTIONS
idoc_not_open = 1
db_error = 2
OTHERS = 3.
Hope this will help.
Regards,
Ferry Lianto -
How to copy and edit a webpage into powerpoint for Mac
In microsoft I would do this in paint and than import into powerpoint. How do I do this on my mac book air?
Thanks!!In microsoft I would do this in paint and than import into powerpoint. How do I do this on my mac book air?
Thanks!! -
I'm not very good at using itunes and recently I have pre-ordered an album, it has become avaliable to buy today and it says I have purchased it along with every song in the album so how do i download this alum/these songs to my libary?
Perhaps?
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 -
Where to find my pic after once they have been edited?
I want to print my pic using EasyShare by Kodak. I need for that to upload the pictures I edited in iPhoto. However I don't know which folder to look into.... It is so confusing with all these folders:data, modified, 2005, roll,... Apple needs to do something about the organisation of the photo media...
THxxavier
The iPhoto media is very simply organised. A Note about the iPhoto Library Folder:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
This allows the Photos -> Revert to Original command - very useful if you don't like the changes you've made.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
But there's no need whatever for you to root around in the iPhoto Library Folder at all. There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
I suggest that you use File -> Export which produces a copy of the pic, which you can then print and afterwards trash the copy - the Original is safe in iPhoto.
Regards
TD -
Every time I receive a new email, once I click on it (and it becomes "read"), it disappears after a minute or two. I cannot seem to recover these emails, they are not in any other folders. Are there settings that do this that I'm completely missing?
Try AppMenu button - View - Messages - All.
-
I can tranfer them to a hard drive on my PC, but am unable to view most of them using QuickTime Player 7.7.4. Doesn't matter if I'm viewing them via a USB connection to my iPhone5 or from a hard drive after the file has been copied via USB. 1% of the vids are viewable, 20% open with a black screen and audio only. The rest open with a blue, purple and green stryrated mess and no audio. Yes its a Quick Time problem I know but where do I post this question in the community? Also searching my drives for other .MOV files downloaded from the net I find the same problem with them.
Heres what I don't like about VLC, but at least the files are viewable...somewhat.
1. You can't flip the image 90degrees, needs to have a rotate feature for sure. This needs to have keyboard shortcut so vids can be rotated easily as one may have shot video horizontally and vertically in the same take.
2. Opens file to a very large window, most of it off the screen, it should REMEMBER what you resized it to, so the next time a video is played you don't have to drag the window back on the screen so you can get to the resizing handle in the lower corner.
3. Doesn't buffer while playing, so the movies are extremely erractic, starting and stopping every 3 seconds, highly annoying.
OK so maybe my PC is too slow, its a dual processor 486 Hyperrthread 2.8G but I only have 2Gigs of memory, however, bettery than 50% of the memory is still available while playing a vid (memory is checked every 4 seconds with a program), but I have 90-100% CPU useage going on while playing.
Maybe I should think about a new computer.
Maybe you are looking for
-
Hi, we purchased 8 WAP4410N access points to cover our entire school with wireless internet. 2 of those could not have access to a wired network accesspoint, so we wanted those to repeat the signal of 2 others. The ones who are to provide the signal
-
Ipod Screen Is White And Power Button Jammed
My Ipod Screen Turned White(blank) And My Power Button Is Jammed What Do I Do?
-
How can I change the sample rate (delta X)?
Hi, I create vi which can measure resistance, it will record the data and write to a file. however, I want to change the sample rate which is delta x. is that anyway I can do? I have try to put a clock inside the loop, it does slow down the speed but
-
All office programs crash when I click on the File menu
I can open files in every program fine but as soon as I go to the File Menu it puts up the "program" is not responding box Excel, Word and PowerPoint all crash when trying for the File Menu. Outlook will let me go to the File Menu but if I click on O
-
SOMEONE TELL ME HOW I CAN GET IT BLOCKED!! PLEASE