How to copy and paste a photo in another folder using Aperture?

How to copy and paste a photo in another folder using Aperture?

What do you want to achieve? Do you really want to create a copy of an image, and thus create a second copy of the master image file? You will waste disk space this way.
Usually you would create new versions of an image, if you want versions with different adjustments. Versions do not require much additional disk space. But all versions of an  image have to be in the same project. To create a new version: Main menu bar -> Photos -> Duplicate Version
To create a copy of an image in another project (and to waste the space ) drag the image to another project while holding down the option key. This will create a copy in the other project.
Sofar nobody here could come up with a good reason why one would want to create a copy. I am curious what in your workflow requires you to do that. Would you mind to tell us?
Regards
Léonie

Similar Messages

  • I am unable to copy and paste a photo into another event;

    and if I duplicate the picture in one event, and then highlight one,; cut and paste into another it moves both pictures into the other event even though only one was selected.  Any advice please?

    This has been reported before.
    IPhoto menu -> Provide iPhoto Feedback and report it too.

  • How do you copy and paste a photo from the internet without a mouse?

    Does anyone know how to copy and paste a photo from the internet without a mouse?  I would appreciate a response asap.  Thanks.

    http://support.apple.com/kb/HT2477
    Pointing, clicking, and getting around
    When you move your mouse or finger on a trackpad, you control a pointer (also known as a cursor) that moves across your screen. The pointer allows you to select and interact with the various items on your screen, including selecting files, clicking buttons, dragging sliders, and so on. Sometimes the pointer may look like a hand, a crosshair, an I-beam, or another icon, depending on what you're doing and the application you're using.
    For example, if you're using Safari to view this webpage and move the pointer across it, notice that it turns into an I-beam when you move it over text or a text field. When you see this, you can usually interact with the text or field below it. When you move the pointer over a button or link, the pointer turns into a hand, letting you know that you can click on the item.
    Depending on what you're doing and what application you're using, your pointer (far left) may change appearances
    Clicking your mouse button or trackpad button once allows you to select the item that your pointer is on. In other words, if your pointer is on a file's icon, clicking once will select it. If the pointer is on a button or link, clicking once will activate it. If your pointer is on a text field, clicking once highlights the field and allows you to start typing text in it.
    If you want to open a file, folder, or application, click your mouse button or trackpad twice. This is known as double-clicking. In general, you'll need to double-click items if you want to open them from a Finder window or the desktop. The exception to this is opening stuff from the Dock—just click once on an icon in the Dock to open it.

  • How to copy and paste text from one photo book page to another.

    hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
    This question was solved.
    View Solution.

    Hi DG.
    The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
    Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
    Our customer support team would be happy to walk you through the process. Contact them at [email protected]
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • How to copy and paste photos to word doc?

    how to copy and paste photos from finder to word doc? It just shows the url...

    Hi John,
    You can do as the followings:
    Create a blank form with InfoPath Designer 2010,
    Add a Rich Text Box control and Submit button in the blank form
    Publish the form to your SharePoint site
    Open the form library and create a document
    Copy the table with text from word file
    Paste the table in the Rich Text Box area, the paste option is Keep Source Formatting
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and p

    How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • How to copy and paste a single pixel

    How to copy and paste a single pixel
    I want to copy a single pixel and then paste it in the
    position of
    another pixel in the same image.
    (This is in effect changing the colour of the target pixel,
    isn't it.
    But in my case copying an existing pixel seems simpler than
    selecting a
    colour from the swatch or using the colour picker.)
    What is the most efficient way of doing this?
    I tried to select one pixel with the marquee tool. Then
    copied it with
    control-C, but then how do I select the target pixel and
    paste with
    control-V?
    Thanks for your help.
    Adrian

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • How to copy and paste file in mavericks

    how to copy and paste file in mavericks?

    Spoombung wrote:
    I actually can't get copy and paste to work in Mavericks!!!
    Is it me, or is there something wrong with it? I can hardly believe this was overlooked....
    Obviously it was not overlooked.
    Select a file, go to the edit menu and choose Copy, open another folder and choose Paste from the edit menu.
    What happened (error messages etc)

  • I am a new iPad user and cannot figure out how to copy and paste from a website to pages. Any insight?

    I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?

    Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
    If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages.

  • How to copy and paste

    Having trouble learning how to copy and paste...

    Write something.  Long tap on it, choose select, adjust the amount you want copy, tap the page, continue typing. To paste tap the page and select paste.watch,Write something.  I cut and pasted write something. The iPad User Guide for IOs7" free at iBooks explains it better.

  • How to copy and paste the text in Russian - 'command+c' erases it

    How to copy and paste the text in Russian - 'command+c' erases it

    I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it  in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(

  • How to copy and paste in Adobe ios?

    How to copy and paste in Adobe ios?

    Hi alvintheartist,
    Please try the following steps.
    Press & hold your finger over text in a PDF document.
    Move the blue circle "grabbers" (handles) to expand/reduce the text selection.
    Select Copy from the context menu that pops up.
    You can paste the copied text into other iOS app or the Search field in Adobe Reader for iOS.
    Please note that you cannot paste text directly to a PDF document (because Adobe Reader for iOS is not a PDF editor).  However, you can add text annotations to a PDF document.
    If you are not able to select text at all, it is highly likely that your PDF document is a scanned PDF (that contains no text).
    Please let us know if you have additional questions.

  • I can not find out how to copy and paste firefox does not allow it

    Firefox does not allow me to highlight html documents when on line and then copy and paste
    When I left click to highlight it just moves a ghost copy of the whole document away from where you begin.
    I can not find out how to copy and paste firefox does not allow it

    What is your Operating System?
    How do you highlight the HTML document and copy the selected text to the clipboard?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.

  • How do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    how do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    Zip (compress) the folder before you send it.

  • How to copy and paste files to Time Capsule

    I thought it could be used as an external disk.
    Do you guys know how to copy and paste files directly into Time Capsule?

    I thought it could be used as an external disk.
    An external disk...also known as a local disk....connects directly to a computer using USB or FireWire.
    The Time Capsule is a network disk, since it connects direct to a network. As such, it s a SHARED network device
    Open a Finder window and look for the SHARED heading on the left side of the window. The Time Capsule icon should appear there. Click on the Time Caspule icon.
    A folder, representing the Time Capsule drive named "Data" (unless you have changed the name of the drive) will appear to the right
    Double click on "Data" to mount the Time Capsule drive on the desktop. You may need to click "Connect As" and enter the Time Capsule device password the first time that you do this.

Maybe you are looking for

  • Can't get iPod to back up. Help?

    I asked this question two days ago, and information below on the question... "I can't get my iPod touch to successfully backup. It's the only issue I have with my iPod. I plug it in, and then I hit the sync button for it. Both, my iPod touch and iTun

  • To color a specific row in a Table UI element

    Hello Experts, We have a requirement to highlight (with distinguish color) a specific row of a table UI based on column data. Suppose we have a table with 5 column and 10 row, now if the data on 5th column greater than some XYZ value then we need to

  • Lateste update to my system resulted in my Word crashing on saving or closing documents.

    Yosemite has been working fine for me overall; however, yesterday there was an update to my system that resulted in my Word 365 crashing as soon as I try to save a document. Any suggestions other than getting rid of Word?

  • Moving the caret in a non-editable JTextPane ??

    Hi, I would like to know if it's possible to have a visible and moveable caret (with the directional arrows) in a JTextPane which has to be non editable. If you know how to do, could you please answer and give the solution Thanks in advance

  • Fluid layout wont float

    Dear all, I know there will be a simple solution and i've read lots of tutorials but i cant find my mistake. Im using a fluid layout and trying to simply float two div tags next to eachother. Below is my code please help. HTML <body>   <div class="gr