How to copy and paste a single pixel

How to copy and paste a single pixel
I want to copy a single pixel and then paste it in the
position of
another pixel in the same image.
(This is in effect changing the colour of the target pixel,
isn't it.
But in my case copying an existing pixel seems simpler than
selecting a
colour from the swatch or using the colour picker.)
What is the most efficient way of doing this?
I tried to select one pixel with the marquee tool. Then
copied it with
control-C, but then how do I select the target pixel and
paste with
control-V?
Thanks for your help.
Adrian

Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>

Similar Messages

  • How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and p

    How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • I am a new iPad user and cannot figure out how to copy and paste from a website to pages. Any insight?

    I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?

    Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
    If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages.

  • How to copy and paste the text in Russian - 'command+c' erases it

    How to copy and paste the text in Russian - 'command+c' erases it

    I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it  in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(

  • How to copy and paste text from one photo book page to another.

    hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
    This question was solved.
    View Solution.

    Hi DG.
    The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
    Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
    Our customer support team would be happy to walk you through the process. Contact them at [email protected]
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • How to copy and paste file in mavericks

    how to copy and paste file in mavericks?

    Spoombung wrote:
    I actually can't get copy and paste to work in Mavericks!!!
    Is it me, or is there something wrong with it? I can hardly believe this was overlooked....
    Obviously it was not overlooked.
    Select a file, go to the edit menu and choose Copy, open another folder and choose Paste from the edit menu.
    What happened (error messages etc)

  • How to copy and paste photos to word doc?

    how to copy and paste photos from finder to word doc? It just shows the url...

    Hi John,
    You can do as the followings:
    Create a blank form with InfoPath Designer 2010,
    Add a Rich Text Box control and Submit button in the blank form
    Publish the form to your SharePoint site
    Open the form library and create a document
    Copy the table with text from word file
    Paste the table in the Rich Text Box area, the paste option is Keep Source Formatting
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to copy and paste

    Having trouble learning how to copy and paste...

    Write something.  Long tap on it, choose select, adjust the amount you want copy, tap the page, continue typing. To paste tap the page and select paste.watch,Write something.  I cut and pasted write something. The iPad User Guide for IOs7" free at iBooks explains it better.

  • How to copy and paste a photo in another folder using Aperture?

    How to copy and paste a photo in another folder using Aperture?

    What do you want to achieve? Do you really want to create a copy of an image, and thus create a second copy of the master image file? You will waste disk space this way.
    Usually you would create new versions of an image, if you want versions with different adjustments. Versions do not require much additional disk space. But all versions of an  image have to be in the same project. To create a new version: Main menu bar -> Photos -> Duplicate Version
    To create a copy of an image in another project (and to waste the space ) drag the image to another project while holding down the option key. This will create a copy in the other project.
    Sofar nobody here could come up with a good reason why one would want to create a copy. I am curious what in your workflow requires you to do that. Would you mind to tell us?
    Regards
    Léonie

  • How to copy and paste in Adobe ios?

    How to copy and paste in Adobe ios?

    Hi alvintheartist,
    Please try the following steps.
    Press & hold your finger over text in a PDF document.
    Move the blue circle "grabbers" (handles) to expand/reduce the text selection.
    Select Copy from the context menu that pops up.
    You can paste the copied text into other iOS app or the Search field in Adobe Reader for iOS.
    Please note that you cannot paste text directly to a PDF document (because Adobe Reader for iOS is not a PDF editor).  However, you can add text annotations to a PDF document.
    If you are not able to select text at all, it is highly likely that your PDF document is a scanned PDF (that contains no text).
    Please let us know if you have additional questions.

  • I can not find out how to copy and paste firefox does not allow it

    Firefox does not allow me to highlight html documents when on line and then copy and paste
    When I left click to highlight it just moves a ghost copy of the whole document away from where you begin.
    I can not find out how to copy and paste firefox does not allow it

    What is your Operating System?
    How do you highlight the HTML document and copy the selected text to the clipboard?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.

  • How to copy and paste files to Time Capsule

    I thought it could be used as an external disk.
    Do you guys know how to copy and paste files directly into Time Capsule?

    I thought it could be used as an external disk.
    An external disk...also known as a local disk....connects directly to a computer using USB or FireWire.
    The Time Capsule is a network disk, since it connects direct to a network. As such, it s a SHARED network device
    Open a Finder window and look for the SHARED heading on the left side of the window. The Time Capsule icon should appear there. Click on the Time Caspule icon.
    A folder, representing the Time Capsule drive named "Data" (unless you have changed the name of the drive) will appear to the right
    Double click on "Data" to mount the Time Capsule drive on the desktop. You may need to click "Connect As" and enter the Time Capsule device password the first time that you do this.

  • How to copy and  paste the data directly from the excel to the PDF?

    hi,
    I have found the same question on the link:
    How to copy excel sheet to pdf form?
    But I didnt get my answer through that forum.
    My requirement is dat I should copy the data from excel sheet and directly paste it to PDF form.
    When I am trying to copy and paste ..all the data is getting pasted into a single block only.
    Kindly help.
    Thanks & Regards,
    Lina

    So you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
    The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors.

  • How to copy and paste a multi-page table of contents?

    Hi everyone.
    I have a large document with a Table Of Contents extending over two pages. I'd like to copy the entire TOC then paste it into a new Pages document.
    I have been able to copy the TOC however when I try to paste it into a new blank Word Processing pages document the following Error message appears: "The table of contents is empty because none of the paragraph styles selected in the Document Inspector are used in the document."
    I can paste it into a blank Page Layout pages document however it pastes it into a text box with only one page of the TOC in it.  Even if the new Page Layout document has two pages and I extend the text box over the two pages only one page of the TOC is copied into the new Page Layout document. At the moment the only work-around I can do is to take a screen shot of each individual page of the TOC and paste them individually into a new pages document. I have tried exporting the entire original document to a plain text file however all the formating is lost (obviously).  I have also tried exporting the entire original document to a Word document (.doc) however it won't let me copy the multi-page TOC and paste it into a new Word document. 
    Is there any way to successfully copy a multi-page table of contents to a new Pages document?

    VQM wrote:
    Thanks Peter.
    PeterBreis0807 wrote:
    The TOC is a hyperlinked text derived from the contents of the file it was generated in.
    You can try exporting the pages the TOC is on as rtf, text or pdf and transferring that, but I would question the value of a TOC for one document being in an entirely different document, which doesn't have what the TOC is pointing to.
    Have you tried copying the T.O.C. Section from the document Thumbnails and pasting into the document Thumbnails of the 2nd document?
    Peter
    How does one export individual pages from a Pages document?
    I've also tried to copy the TOC section from the document thumbnail however I can't figure out how to select multiple pages in the document thumbnails.  It only allows me to select one at a time. Furthermore, when I do select a single page from the thumbnail section and attempt to drag and drop it into the the thumbnail section of the second document it picks up the whole document and wont allow me to move it from the thumbnail section of the original document.
    Shift click to select multiple pages, and I did say Copy and Paste, not drag and drop.
    Peter

  • How to copy and paste the same answer choices multiple times

    I am making testing forms and each question has the same multiple choice answer selection.  I have been having to type each one of them individually instead of being able to duplicate it for each question.  How can I do what in Word would just be a "copy and paste" function?

    So you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
    The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors.

Maybe you are looking for