How to copy and paste an image in iTunes 12
The old iTunes was very easy to use but the info box in iTunes 12 is a disaster. I can no longer copy and image and then paste it into the artwork box in the iTunes info box. It seems that I have to save the image somewhere and then point iTunes to it. What gives? Isn't there some easier way. Not every album includes artwork.
Better yet, how do I restore iTunes 12 back to iTunes 11. That version was so much easier to use.
Save the artwork in your pictures area on your computer. Then go on to itunes and right click on the song you want to add the artwork too and go to get info, then click on the box that says artwork, then click add artwork and it will open a box that will let you search your computer for the image.
I had the same problem as you and done this and it allowed me to allocate artwork to songs. Hope this helps.
Similar Messages
-
How to copy and paste an image within adobe pro XI?
I couldn't figure out how to respond to a question on this, but here is what I found out:
Select
Tools | Edit Text & Images
Select the portion of the image you want to copy
Ctrl-C (copy)
Ctrl-V (paste)
Then drag cursor over the copied portion until you have the 4 arrows -- hold down the left mouse button and drag to where you want to place the image
Pieces of the image may be selected in the same fashion. Right clicking on the copied image gives some options for editing the image as a whole, also.e ma
Hope this helps someone -- took me a while to figure it out -- even though it is simple to do.Thread moved from the Adobe Captivate forum.
-
Copy and paste a image to the clipboard
Hi,
Is there anybody who knows how to copy and paste an image to the clipboard in jdk 1.3.0.
I want make a image copy of my app like this (Panel):
Image image = (Image)this.createImage(this.getWidth(), this.getHeight());
Graphics g = image.getGraphics();
this.paint(g);
BufferedImage bufImage = (BufferedImage)image;
Now i will send this bufImage or the image to the clipboard.
How will it works?
Thanks a lot.Hi,
I m having similar type of problem but with JPanel not with image. i m able to copy paste a JPanel using same clipboard but i want some more operations like after zoomin my JPanel , i want that now if i copy the image of Jpanel it should be the copy of original size of JPanel not the zoomed one but in my application it is showing the blank picture
for zoom fit size of JPanel its working ok.
please advice me what should i do -
How do I copy and paste an image from the internet to Keynote. I have done so successfully in the paste by using the copy and paste right click functions but am unable to do so now. That was about a year ago that I attempted that I was able to do this. Thank you for your help.
Some images are copy-protected.
If all else fails, you can make a screen shot of the image:
With the image visible in your browser, press CMD-Shift-4 and your cursor will change to crosshairs.
Position the cross hairs at one of the corners of what you want to copy and drag to the opposite corner, then release the mouse. An copy of the image will be saved to your desktop.
You can now edit and use this image.
Be sure to respect copyrights.
Message was edited by: bwfromspring hill -
How can i copy and paste an image from 1page to another on iPad
i have been trying all afternoon to get copy and past to work on images from 1 page to another, are shortly going on holiday and thought i would keep in contact with a website that i belong to, to be able to go on the forum and take part in the quiz's that i do now, but are not able to copy and paste an image from 1 page to another, i click on the pic, save image and copy comes up,i press copy, then go the the other page,click on the box, paste comes up but no image what am i doing wrong
any help would be most appreciated as i have been trying for the last 4 hours
margaretCopy and paste? What app are you using?
When you tap on an image and select copy that usually copies the URL of the image.
Save image copies the image to your Camera Roll.
Most apps have an Insert choice that inserts an image from your Camera Roll into the document you are working on.
But if you tell us which app you are using, we should be able to provide more exact info on how to get done what you want. -
copying and pasting images from adobe. I make greetings cards and use images downloaded from cardmaking websites eg - printable heaven. Recently I find I am unable to copy and paste the images which are opened in adobe reader. Why ? How can I overcome this problem.
Check the document properties; is copying allowed?
-
How to select copy and paste an image that has a layer mask
Hi,
when I select, copy and paste the image it still has the content that I removed using the layer mask.
I want to paste it over another psd whilst maintaing the transparency.
Any help would be much appreciated.
PSD is at
http://sdrv.ms/16DoRft
The small jpg is because I don't know what you will see in the skydrive psd
MichaelWow that was so easy!
Thanks!
I spent at least half and hour trying to figure out why it wouldn't work.
Michael -
How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.
Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
> -
How to copy and paste a single pixel
How to copy and paste a single pixel
I want to copy a single pixel and then paste it in the
position of
another pixel in the same image.
(This is in effect changing the colour of the target pixel,
isn't it.
But in my case copying an existing pixel seems simpler than
selecting a
colour from the swatch or using the colour picker.)
What is the most efficient way of doing this?
I tried to select one pixel with the marquee tool. Then
copied it with
control-C, but then how do I select the target pixel and
paste with
control-V?
Thanks for your help.
AdrianUse the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
> -
I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?
Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages. -
How to copy and paste a photo in another folder using Aperture?
How to copy and paste a photo in another folder using Aperture?
What do you want to achieve? Do you really want to create a copy of an image, and thus create a second copy of the master image file? You will waste disk space this way.
Usually you would create new versions of an image, if you want versions with different adjustments. Versions do not require much additional disk space. But all versions of an image have to be in the same project. To create a new version: Main menu bar -> Photos -> Duplicate Version
To create a copy of an image in another project (and to waste the space ) drag the image to another project while holding down the option key. This will create a copy in the other project.
Sofar nobody here could come up with a good reason why one would want to create a copy. I am curious what in your workflow requires you to do that. Would you mind to tell us?
Regards
Léonie -
I can not find out how to copy and paste firefox does not allow it
Firefox does not allow me to highlight html documents when on line and then copy and paste
When I left click to highlight it just moves a ghost copy of the whole document away from where you begin.
I can not find out how to copy and paste firefox does not allow itWhat is your Operating System?
How do you highlight the HTML document and copy the selected text to the clipboard?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot. -
Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best -
How to copy and paste text from one photo book page to another.
hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
This question was solved.
View Solution.Hi DG.
The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
Our customer support team would be happy to walk you through the process. Contact them at [email protected]
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts -
How to copy and paste file in mavericks
how to copy and paste file in mavericks?
Spoombung wrote:
I actually can't get copy and paste to work in Mavericks!!!
Is it me, or is there something wrong with it? I can hardly believe this was overlooked....
Obviously it was not overlooked.
Select a file, go to the edit menu and choose Copy, open another folder and choose Paste from the edit menu.
What happened (error messages etc)
Maybe you are looking for
-
Trying to install OS 10.4 from OS 10.2.8
System is a G4 Power PC 10.2.8, with 256mb RAM, 28 GB hardrive with 26GB remaining. I have an Apple DVD (black) instal disk, when I try to install I get the screen to click to install and it says to restart system to start installation which I did. B
-
I recently updated my ipad and then I connected with my computer for sync, not realising that I had a new version of itunes with none of my apps. Now I have lost all of the apps and books etc, that I had prurchased. How do I get them back?
-
My hard drive failed. How do I restore library on a new hard drive?
My hard drive failed. How do I restore library on a new hard drive? Thanks.
-
How to unlock an ipod forgot my pass code
how to unlock an ipod forgot my pass code
-
Why is the Instrument Library invalid?
Hi- Had problems with my hard drive and I managed to loose GarageBand. I was able to get the GarageBand 3 program (102.7 MB) and the Instrument file (1.52 GB) from a friend. Placed the GarageBand program into the Applications folder, and the Instrume