How to copy and paste an object (i.e. a drawn polygon) without it automatically rotating in the pasted page?

In detail:  I have a multiple page PDF for a construction project.  We are using Adobe to mark the drawings up; the drawings have a set scale.  In my scenario, I am highlighting a region of known data on the plan using a shaded polygon.  I have another page that I need to compare that shaded region to that is at a different scale.   I reprinted the differently scaled plan through Adobe at 200% size to match to the main document's scale (going from '1 inch = 40 feet' up to '1 inch = 20 feet').  That newly printed page was inserted into the document containing with the polygon.  I then copied and pasted the polygon onto the new page.  The polygon is automatically rotated 270 degrees.
The issue is why the polygon is rotating.  The above information is just in case it matters.  And, yes, sometimes this happens in other files as well, but not always.
Using Adobe Standard X (NOT Pro), version 10.1.9

Thank you Sukrit for responding.
The computer I am using is controlled by a government agency.  They do not allow users to install or modify any software.  The file I am using, though a public document, may not be advisable to be posted online.
However, my solution to the issue was to reprint the document that I was pasting into and modifying the print settings to rotate the PDF image.  First, I had to change the size of the PDF beyond the original full size dimensions to account for the scale change.  Then change the print settings to print landscape while telling adobe's advanced settings to print portrait.  After some finesse with other settings for scale, I was able to copy and paste the polygon without loosing the scale.  This took me a week to figure out.  An extreme waste of time for such a simple issue that should not occur in such a popular software.

Similar Messages

  • How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and p

    How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • How to copy and paste text from one photo book page to another.

    hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
    This question was solved.
    View Solution.

    Hi DG.
    The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
    Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
    Our customer support team would be happy to walk you through the process. Contact them at [email protected]
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • How to copy and paste a single pixel

    How to copy and paste a single pixel
    I want to copy a single pixel and then paste it in the
    position of
    another pixel in the same image.
    (This is in effect changing the colour of the target pixel,
    isn't it.
    But in my case copying an existing pixel seems simpler than
    selecting a
    colour from the swatch or using the colour picker.)
    What is the most efficient way of doing this?
    I tried to select one pixel with the marquee tool. Then
    copied it with
    control-C, but then how do I select the target pixel and
    paste with
    control-V?
    Thanks for your help.
    Adrian

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • How to copy and paste file in mavericks

    how to copy and paste file in mavericks?

    Spoombung wrote:
    I actually can't get copy and paste to work in Mavericks!!!
    Is it me, or is there something wrong with it? I can hardly believe this was overlooked....
    Obviously it was not overlooked.
    Select a file, go to the edit menu and choose Copy, open another folder and choose Paste from the edit menu.
    What happened (error messages etc)

  • I am a new iPad user and cannot figure out how to copy and paste from a website to pages. Any insight?

    I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?

    Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
    If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages.

  • How to copy and paste photos to word doc?

    how to copy and paste photos from finder to word doc? It just shows the url...

    Hi John,
    You can do as the followings:
    Create a blank form with InfoPath Designer 2010,
    Add a Rich Text Box control and Submit button in the blank form
    Publish the form to your SharePoint site
    Open the form library and create a document
    Copy the table with text from word file
    Paste the table in the Rich Text Box area, the paste option is Keep Source Formatting
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to copy and paste

    Having trouble learning how to copy and paste...

    Write something.  Long tap on it, choose select, adjust the amount you want copy, tap the page, continue typing. To paste tap the page and select paste.watch,Write something.  I cut and pasted write something. The iPad User Guide for IOs7" free at iBooks explains it better.

  • How to copy and paste the text in Russian - 'command+c' erases it

    How to copy and paste the text in Russian - 'command+c' erases it

    I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it  in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(

  • How to copy and paste a photo in another folder using Aperture?

    How to copy and paste a photo in another folder using Aperture?

    What do you want to achieve? Do you really want to create a copy of an image, and thus create a second copy of the master image file? You will waste disk space this way.
    Usually you would create new versions of an image, if you want versions with different adjustments. Versions do not require much additional disk space. But all versions of an  image have to be in the same project. To create a new version: Main menu bar -> Photos -> Duplicate Version
    To create a copy of an image in another project (and to waste the space ) drag the image to another project while holding down the option key. This will create a copy in the other project.
    Sofar nobody here could come up with a good reason why one would want to create a copy. I am curious what in your workflow requires you to do that. Would you mind to tell us?
    Regards
    Léonie

  • How to copy and paste in Adobe ios?

    How to copy and paste in Adobe ios?

    Hi alvintheartist,
    Please try the following steps.
    Press & hold your finger over text in a PDF document.
    Move the blue circle "grabbers" (handles) to expand/reduce the text selection.
    Select Copy from the context menu that pops up.
    You can paste the copied text into other iOS app or the Search field in Adobe Reader for iOS.
    Please note that you cannot paste text directly to a PDF document (because Adobe Reader for iOS is not a PDF editor).  However, you can add text annotations to a PDF document.
    If you are not able to select text at all, it is highly likely that your PDF document is a scanned PDF (that contains no text).
    Please let us know if you have additional questions.

  • I can not find out how to copy and paste firefox does not allow it

    Firefox does not allow me to highlight html documents when on line and then copy and paste
    When I left click to highlight it just moves a ghost copy of the whole document away from where you begin.
    I can not find out how to copy and paste firefox does not allow it

    What is your Operating System?
    How do you highlight the HTML document and copy the selected text to the clipboard?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.

  • How to copy and paste files to Time Capsule

    I thought it could be used as an external disk.
    Do you guys know how to copy and paste files directly into Time Capsule?

    I thought it could be used as an external disk.
    An external disk...also known as a local disk....connects directly to a computer using USB or FireWire.
    The Time Capsule is a network disk, since it connects direct to a network. As such, it s a SHARED network device
    Open a Finder window and look for the SHARED heading on the left side of the window. The Time Capsule icon should appear there. Click on the Time Caspule icon.
    A folder, representing the Time Capsule drive named "Data" (unless you have changed the name of the drive) will appear to the right
    Double click on "Data" to mount the Time Capsule drive on the desktop. You may need to click "Connect As" and enter the Time Capsule device password the first time that you do this.

  • I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?

    I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?

    Drew how is that even possible? I use gift cards all the time, any time I've had insufficient funds iTunes will not allow the purchase, sights Insufficient funds and rejects the purchase. Any time I log into my account the money in that account appears in the upper left corner. If you're not seeing that then you have other issues. Anyway... Kneil is right you should be able to rip CDs you own to your iTunes library (regardless of your money matters with iTunes), then depending on how you set up the music you need to add it to your playlist and then sync it to your iPod. Did imported music ever work? How are you ripping or importing the music to iTunes? Are you using a compatible format?
    Something else to look at-- It's possible your cable is defective, have you tried a new or different cable? Some of what your describing is a bad cable issue. Good luck, Cheers.

  • HT4527 i just copied some music from my external hard disc to my macbook . how can i make all that music be shown in my iTunes without having double copies of the music??

    i just copied some music from my external hard disc to my macbook . how can i make all that music be shown in my iTunes without having double copies of the music??

    Hello Sudhanshu Mishra,
    Thank you for using Apple Support Communities!
    You can have iTunes reference the content where ever it is on your HDD without copying the content to the iTunes library, thus using twice the space.
    If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
    From: Adding music and other content to iTunes
              http://support.apple.com/kb/HT1473
    Additionally if you want the content to then ALSO be located in your iTunes Library folder so everything is all kept together nice and tidy, use this:
    Consolidate your files in the iTunes folder
    Depending on how you imported items into iTunes, some items in your library might be stored in different locations (in another folder or on another hard disk, for example).
    You can consolidate all the files in your library in the iTunes folder—for example, to make it easier to move your library to a new computer.
    Choose File > Library > Organize Library.
    Select “Consolidate files.”Files remain in their original locations, and copies are placed in the iTunes folder.
    To create folders (Music, Movies, TV Shows, Podcasts, Audiobooks, and so on) inside your iTunes folder, and place all your imported media files in the appropriate folders, select “Reorganize files in the folder ‘iTunes Media.’”
    From: help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePath=English.lproj# itns2999'
    Cheers,
    Sterling

Maybe you are looking for