How to copy and paste files to Time Capsule

I thought it could be used as an external disk.
Do you guys know how to copy and paste files directly into Time Capsule?

I thought it could be used as an external disk.
An external disk...also known as a local disk....connects directly to a computer using USB or FireWire.
The Time Capsule is a network disk, since it connects direct to a network. As such, it s a SHARED network device
Open a Finder window and look for the SHARED heading on the left side of the window. The Time Capsule icon should appear there. Click on the Time Caspule icon.
A folder, representing the Time Capsule drive named "Data" (unless you have changed the name of the drive) will appear to the right
Double click on "Data" to mount the Time Capsule drive on the desktop. You may need to click "Connect As" and enter the Time Capsule device password the first time that you do this.

Similar Messages

How to copy and paste file in mavericks

how to copy and paste file in mavericks?

Spoombung wrote:
I actually can't get copy and paste to work in Mavericks!!!
Is it me, or is there something wrong with it? I can hardly believe this was overlooked....
Obviously it was not overlooked.
Select a file, go to the edit menu and choose Copy, open another folder and choose Paste from the edit menu.
What happened (error messages etc)

How to copy and paste files and folders

hi all
i need to copy files and folder from one place to another place... how can i do it.. cud any1 help me pl

And why do you need java for that task?

How do I copy and paste files from a windows remote server to my mac?

How can i copy and paste files from a remote server (windows) to my mac? i have installed cord to connect to the server but now i can´t cpy the files to my mac!

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

Copy and paste files from Windows Explorer

Hi everybody,
For a part of my application I need to copy and paste files and folders from Windows explorer to the vi shown in the picture.
Does anybody know how to implement this with the clipboard functionality.
Also drag and drop would be very nice (but thats maybe a later step...)
Best regards, Helmut

Hello Friedr,
drag and drop is the easy part!
Use a path control, this will naturally allow drag and drop. If a file is dropped on this a 'Value Change' event is fired! with this event you can load the data into the picture. To get a nice drag and drop functionality you should make the path transparent and resize to the size of the picture control. This will work fluently!
To use the clipboard, LV 8 has an functionality for this, I think it is an application event.
Success Ton
PS I didn't see you image maybe it was removed when you did a preview these have the bad habit of removing the attachments!
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to copy and paste photos to word doc?

how to copy and paste photos from finder to word doc? It just shows the url...

Hi John,
You can do as the followings:
Create a blank form with InfoPath Designer 2010,
Add a Rich Text Box control and Submit button in the blank form
Publish the form to your SharePoint site
Open the form library and create a document
Copy the table with text from word file
Paste the table in the Rich Text Box area, the paste option is Keep Source Formatting
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to copy and paste the text in Russian - 'command+c' erases it

How to copy and paste the text in Russian - 'command+c' erases it

I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(

How to copy and paste a photo in another folder using Aperture?

How to copy and paste a photo in another folder using Aperture?

What do you want to achieve? Do you really want to create a copy of an image, and thus create a second copy of the master image file? You will waste disk space this way.
Usually you would create new versions of an image, if you want versions with different adjustments. Versions do not require much additional disk space. But all versions of an image have to be in the same project. To create a new version: Main menu bar -> Photos -> Duplicate Version
To create a copy of an image in another project (and to waste the space ) drag the image to another project while holding down the option key. This will create a copy in the other project.
Sofar nobody here could come up with a good reason why one would want to create a copy. I am curious what in your workflow requires you to do that. Would you mind to tell us?
Regards
Léonie

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items to those devices but it won't work. I also have tried copying and pasting those files onto those devices but that doesn't work too. Can any one help?

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?

Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and p

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>

How to copy and paste text from one photo book page to another.

hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
This question was solved.
View Solution.

Hi DG.
The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
Our customer support team would be happy to walk you through the process. Contact them at [email protected]
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Can't copy and paste files using RDP session in server 2012

I'm running windows 8, but I have also verified on a windows 7 machine as well. We have server 2012 installed on a machine
I use remote desktop to get into. I cannot copy files from my local pc and use paste to get them to the server. I could do this with server 2008. Is there some setting I have to change or does this not work with server 2012?
FYI, clipboard is checked when I open my remote desktop connection window. If I connect into a win server 2008 r2 machine from the same local machine, I can copy and paste files
just fine.
- Michael

Hi,
I believe RDS clipboard redirection should be enabled by default also on Windows Server 2012. Is there perhaps is a Group Policy Object active that is configured to disable Clip Board Redirection? Either on the computer or the user OU. If not:
You did not explicitly state this, but I'm assuming that you are running in Application Mode (meaning you did not install the RD Session Host role) ? If so please check the registry on the Windows Server 2012 destination server and look for:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Winstations\RDP-Tcp\fDisableClip
this should be set to
0, to make allow Clipboard Redirection
Also check the key below:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Addins\Clip Redirector
This should have:
Name
REG_SZRDPClip
Type
REG_DWORD0x00000003
If you did run the RD Session Host role, and you have done so using a Scenario Based Deployment (Scenario
Based Deployment of RDS in Windows Server 2012 ) you will have a Remote Desktop Management Service GUI available as pat of the Server Manager with which you can enable or disable ClipBoard Redirection from within a GUI on a Session Collection level
or you can use PowerShell
Using Powershell to install, configure and maintain RDS in Windows Server 2012
Kind regards,
Freek Berson
The Microsoft Platform
Twitter
Linked-in
Wortell company website

How to copy and paste a single pixel

How to copy and paste a single pixel
I want to copy a single pixel and then paste it in the
position of
another pixel in the same image.
(This is in effect changing the colour of the target pixel,
isn't it.
But in my case copying an existing pixel seems simpler than
selecting a
colour from the swatch or using the colour picker.)
What is the most efficient way of doing this?
I tried to select one pixel with the marquee tool. Then
copied it with
control-C, but then how do I select the target pixel and
paste with
control-V?
Thanks for your help.
Adrian

Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>

Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?

Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?

What do "normal" AI prefs mean? AICB or PDF compliant? You might wanna try to turn off the latter....
Mylenium

I am a new iPad user and cannot figure out how to copy and paste from a website to pages. Any insight?

I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?

Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages.

How to copy and paste files to Time Capsule

Similar Messages

Maybe you are looking for