How to copy and use the RAID files for ATI SB600 for a new build

WinXP Home
MSI K9A Platinum
AMD Athlon X2-3600+
2 x Seagate 250GB SATA2 3GB/s HHD
2 x HIS X1950Pro in Crossfire
2 x OCZ2A8002GK Crossfire certified modules
Enermax Galaxy 850
Hello, I plan on setting this new build up with SATA RAID 0. I tried to follow the ReadMe file in the RAID drivers download but think I am not fully understanding. The ReadMe says to copy all files to the media...it said floppy but I am going to use a flash drive. I did so but there were two folders, X64 and  X86. Do I open those two folders and copy all the contents or do I just copy the two folders directly to the drive?
Thank you

Quote from: lewislink on 05-July-07, 02:13:43
Open the sub-folders and copy their contents, or copy the sub-folders, themselves?
What about BIOS update? Will it be necessary to use a floppy or can a flash drive function?
"What about BIOS update? Will it be necessary to use a floppy or can a flash drive function?"
don't update the BIOS when everythink is working...
"Open the sub-folders and copy their contents, or copy the sub-folders, themselves?"
copy them as is.. directly with sub-folders included.

Similar Messages

  • How to copy and paste the solution files of SharePoint 2010 from one machine to another machine?

    Hi,
    I was working with SharePoint 2010  in one of my Virtual machines.Now that the lease for my Virtual Machine is going to expire, I want to shift the entire contents of the project to another machine (local) with SharePoint 2010. Also, I want the pages
    in the other machine to be editable. 
    How can I copy the solution files to the other machine? And I want the exact path where the files are located, so that I can shift them to the other machine.
    Thanks in advance. 

    ...that's not a good approach.
    Deploying customisations can be as simple as files being copied onto the file system. Most of the time however there is a lot more happening behind the scenes and simply copying the files won't work.
    Also that is assuming that you mean solutions rather than the pages themselves (or the contents of document libraries) in which case you want to copy databases, not just files.
    SharePoint isn't a simple thing to move, you may need to look at this a bit harder.

  • How to transfer and use the project files from Premiere Pro cs6 MAC OS to Premiere Pro CS6 Windows

    Is there any plugin or tool that can help me to transfer my project files along data edited on adobe premiere cs6 MAC OS to the adobe premiere pro cs 6 on windows PC

    When transferring a project from one computer to another,to stop errors such as these, its essential to ensure that the project is copied with all the files and folders in exactly the same locations. Also before opening the project on the new computer, you need to set up a new project and set all the preferences to be exactly the same as on the first computer. Then when you open the project, premiere will find all the files in all the right places. Even then you may need to re-link some files. Just follow the prompts when Premiere asks "Where is file...."
    We use USB hard drives to store students projects on and they are used on many different computers without problems, as the preferences are all set to be the same.

  • I download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.

    i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
    please help me..
    thanks

    No one here will help you.
    You should definitely ask your question in this forum:
    http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360

  • How to install and verify the license file on ASA 5512-x

    Hi Friends,
    How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
    What need to be done? can i install this lic file on firewall or need to be install on CX server.  Because i dont have the CX server right now.
    Please share me document for installation of this license.
    thx
    Ashish Kumar

    Hi,
    one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
    You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
    With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
    ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
    Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
    So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
    Hope that helps a bit.
    Good luck,
    Shaf

  • How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and p

    How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • How to copy and paste the text in Russian - 'command+c' erases it

    How to copy and paste the text in Russian - 'command+c' erases it

    I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it  in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(

  • How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

    How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
    from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

    I think that stuff is for windows, a waste of time trying to use it on a Mac.
    There is no need to download anything for Khmer on a Mac.  Apple provides Khmer fonts and keuyboards with OS X.
    OS X Mountain Lion: Type in another language
    MS Word for Mac does not support Khmer.  Use TextEdit, Pages, Nisus Writer, LibreOffice instead

  • TS3591 Updated itunes - windows quickly shuts it down and says something about "Data Execution Prevention". I followed the instrucxtions to a dead end. I have re downloaded it twice and used the repair files once but get the same result. It worked fine be

    Updated itunes - windows quickly shuts it down and says something about "Data Execution Prevention". I followed the instrucxtions to a dead end. I have re downloaded it twice and used the repair files once but get the same result. It worked fine before I updated it to death.

    Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

  • How to create and manage the log file

    Hi,
    I want to trace and debug the program process.
    I write the code for creating log file and debugging the process.
    But i am not able get the result.
    please help me how to create and manage the log file.
    Here i post sample program
    package Src;
    import java.io.*;
    import org.apache.log4j.*;
    import java.util.logging.FileHandler;
    public class Mylog
         private static final Logger log = Logger.getLogger("Mylog.class");
         public static void main(String[] args) throws Exception {
         try {
           // Create an appending file handler
            boolean append = true;
            FileHandler handler = new FileHandler("debug.log", append);
            // Add to the desired logger
            Logger logger = Logger.getLogger("com.mycompany");
            System.out.println("after creating log file");     
              catch (IOException e)
                   System.out.println("Sys Err");
            }Please give the your valuable suggesstion... !
    Thanks
    MerlinRoshina

    Just i need to write a single line in log file.

  • Where can I learn how to setup and use the new features in Mountain Lion?

    Where can I learn how to setup and use the new features in Mountain Lion?

    MacWorld has a Superguide, TidBITS has Take Control books, and probably a flock of other publishers have physical books.

  • I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

    Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

    I was searching for how to setup the 903+ and my W520 and came to this thread.
    1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
    but if you are going to go BT headset....
    2.  What I did for the 903+
    Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
    Required reboot.
    Activated the Bluetooth with FN + F5 menu.
    Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
    Ran the updated Bluetooth driver install.
    Rebooted for good measure.
    Double-clicked the Bluetooth Tray icon.
    Clicked Add A Device.
    Turned off my 903+ and continued to hold down the power to enable pairing mode.
    Showed up in devices and added it.
    Worked for audio. There are probably additional options for enabling the mic.
    Hope that helps whoever might find this thread.

  • How to uncover and use the hidden Service menu on the Galaxy S3

    I ran across this article over at Android Central that appeared interesting, there appears to be a diagnostic menu built into the S3 software to test the hardware for defects, this may be a useful item for any users that feel that they have a defective device...   Check out the article at How to uncover and use the hidden Service menu on the Galaxy S3

    That's good to know that such options exist in phones.

  • How to control and use the search criteria values "%" ?

    Hi,
    When I searched some information in my employee name. I filled in search criteria values "%" and selected the "Go" button to see the result. But I got errors that the search criteria values should not begin with a "%" or "_" for at least one if the listed fields.
    How to control and use the search criteria values "%" ?
    Thanks,
    sinolee

    sinolee,
    These kinds of details are mentioned in Dev guide. Always have a look into dev guide before posting.
    --Shiv                                                                                                                                                                                                                                                   

  • Can I simply copy and paste an existing library file from XP to a Mac and then copy and paste the music files themselves? Of course, the music files will be in a different location...

    Hello Gurus,
    I have an aged XP machine with a large music library in ITunes. iTunes will not run any longer (tried uninstalling and reinstalling etc to no avail) but the music files are backed up onto an external drive so all safe. I have purchased a Mac which of course already has iTunes installed and I can copy the music files onto the Mac, but can I simply copy and paste the iTunes library files from the XP machine to the Mac so that all of the playlists, tags, ratings etc transfer, or do I have to start again?
    Thanks for the advice.

    Sounds like you have a split library. Ideally you would make this portable before attempting to move it to the Mac. See make a split library portable for details.
    Perhaps you can get iTunes running on the old box long enough to sort things out...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    You will also want to deauthorize the XP system once everything is working properly on the Mac.
    tt2

Maybe you are looking for