HOW TO COPY AUTOMATION
If i have 1 track of lets say drums, and I want to automate them but dont feel like going to each drum sound and automating is there a way of copying the automation to each sound?
Best way is through the Automation folder. There used to be an assignable key command to get to this... why they eliminated it, I'll NEVER understand.
There is a way in though, through the automation event list, which is accessed via an assignable key command. I'm afraid I don't remember how to get into the automation folder from the automation event list window, but it should be pretty easy to figure out. Maybe someone else can jump in here...
I have automation window set up as a screen-set.
But essentially, the automation folder looks just like the arrange page, and all your automation is represented as regions, just like audio & MIDI regions look. Simply option/drag the automation regions, to copy.
A less glamorous way, but still functional, is to set in your automation preferences, to always "Ask" when you copy or move a region.
then simply copy the first drum region (with the automation written on it), to the other tracks. Yes, you'll be placing this overtop of existing regions. You should be given a prompt at this point "Do you want to copy the automation". Say "yes". Do this to every track you want to move the automation to.
When finished moving the regions, simply select the regions that you dragged, and hit the delete key. You will get a second prompt asking you "Do you want to Delete the automation as well". Say "No".
Your original regions will still be there, but now the automation has been copied.
Hope that made sense. ...
Similar Messages
-
How to copy automation curves in between parameters
Is it possible, to copy Specific automation curves between different parameters in Lofic pro X?
I know you can copy and paste automation curves from one track to another, but I can't remember if doing it from one parameter to other is possible.
If I want the exact automation curve that I did for my volume, to be used on the same ( or another ) track, but on a tremolo, How do you do that?
Whenever I try to paste it, it pastes to the same parameter ( Volume Curve to Volume parameter, etc. )
Edit:
I found the answer on another discussion, Use Comand,
Message was edited by: HuanvixoIn project one, open the Automation Event List for the region in question, select all, goto project two, do the same but use paste instead.
Slightly awkward perhaps, but it works. It would have been easier if the automation would just follow the regions when you drag them between projects.
Edit: the Automation Event List is only available as a KC, Ctrl + Cmd + E as default.
/juhani
Message was edited by: juhani h. -
How to copy automation data between projects?
I can copy regions from one project to another, but not automation data (e.g. volume curves). Why? How to work around this?
Cheers,
ConorIn project one, open the Automation Event List for the region in question, select all, goto project two, do the same but use paste instead.
Slightly awkward perhaps, but it works. It would have been easier if the automation would just follow the regions when you drag them between projects.
Edit: the Automation Event List is only available as a KC, Ctrl + Cmd + E as default.
/juhani
Message was edited by: juhani h. -
Copy automation between tracks
Hi everyone,
So sorry, this is probably very easy, but I've been checking out the manual and couldn't find it:
How to copy automation between tracks?
Thanks very much,
NunoHi,
It is something of a hidden feature, mentioned somewhere in the obscure depths of the manual. p. 594, the "tip".
Open the *Automation Event list* by hitting ctrl-⌥-E. Then open another Arrange window, ⌘-1. This second arrange window will contain regions that only hold automation. Those you can copy and move around without affecting Midi or audio placement.
regards, Erik. -
How do you copy automation from one track to another?
How do you copy automation from one track to another? Occassionally I mistakenly blow away a track's automation. I open up an earlier version of the song to try to get the automation. It doesn't seem that you can copy and paste the data. After some struggle, I find a way. Is there an easy way?
1. Copy the track containing the desired automation to another track. (create a track below it to keep things organized)
2. Double click on the region and delete the notes.
3. Now copy the region to the desired track.
P.S. Of course when Logic asks if you want to copy the automation data you say yes) -
How to copy file from global zone to non-global zone?
Hi,
I'm new in zone.
I have installed a zone and I would like to install some programs.
Could you please tell me how to copy downloaded file from internet to the new installed zone?
Kind regards,
DanielI like to use zcp which came from BigAdmin I believe.
#!/usr/bin/perl
# zcp - copy a file from the global zone to a nonglobal zone. Solaris 10.
# 10-Mar-2005, ver 0.50 (first release)
# USAGE: zcp file1 zonename:file2
# eg,
# zcp /etc/syslog.conf workzone1:/tmp
# Standard Disclaimer: This is freeware, use at your own risk.
# 10-Mar-2005 Brendan Gregg Created this.
$ENV{PATH} = "/usr/bin:/usr/sbin";
$VERBOSE = 1;
# Process arguments
# check for arguments,
if (@ARGV != 2) {
die "USAGE: zcp file1 zonename:file2\n";
# check source file exists,
$srcpath = $ARGV[0];
if (! -e $srcpath) {
die "ERROR1: Can't find source file $srcpath\n";
# check destination zone exists,
($destzone,$destpath) = split(/:/,$ARGV[1]);
chomp(@Zones = `zoneadm list`);
foreach $zone (@Zones) { $Zone{$zone} = 1; }
unless ($Zone{$destzone}) {
die "ERROR2: Can't find zone $destzone\n";
# check if destination is a directory or filename,
$dir = `zlogin -S $destzone '
if [ -d "$destpath" ]; then echo 1; else echo 0; fi'`;
if ($dir == 1) {
$node = $srcpath;
$node =~ s:.*/::;
$destpath = "$destpath/$node";
# Print message
print "zcp from $srcpath, to zone $destzone, to file $destpath.\n" if $VERBOSE;
# Copy File
system("cat $srcpath | zlogin -S $destzone 'cat - > $destpath'");
# Verify file copied
$srcsize = -s $srcpath;
$destinfo = `zlogin -S $destzone 'ls -l $destpath'`;
@Fields = split(' ',$destinfo);
$destsize = $Fields[4];
if ($srcsize != $destsize) {
print STDERR "ERROR3: Copy failed, size mismatch ".
"($srcsize != $destsize)\n";
} else {
print "Copy successful ($destpath, $destsize bytes).\n" if $VERBOSE;
} -
How to copy file from application server
Hello experts,
How to copy file from one folder of application server and paste it to other folder of application server(application server is same)?
Is there any function module exists???
thanks in advance
SaurabhHi you can use this function module to move a file from application server to another folder on application server.
call function 'WS_FILE_COPY'
exporting
destination = m_destination
source = m_source
importing
return = return.
Plus u can use this function module to delete the file from that folder from which u want to replace it.
call function 'WS_FILE_DELETE'
exporting
file = m_source
importing
return = return.
The above FM can help u copy a file from one folder to another and delete the file from that folder. -
How to copy/download all ABAP programs in a text with a single report ?
How to copy/download all ABAP programs in a text format with a single report/TC ?
How to copy/download ABAP source code with all include programs ?....
we need to search & copy all include programs everytime....Hi,
check this link
downloading programs
Regards -
How to Copy a Long Column in PL/SQL
Hello. Can anyone tell me how to copy a table that contains a long column? I am using Oracle 8.0.5 SQL Worksheet
with the following code that generates an ORA-06502: PL/SQL: numeric or value error.
CREATE TABLE "Tmp_CB_REPORT"
CB_RPT_ID NUMBER(38, 0),
CB_ID NUMBER(38, 0),
CB_REGION_ID NUMBER(38, 0),
WHEN_PULLED DATE NOT NULL,
PARSED NUMBER(1, 0) DEFAULT (0) NOT NULL,
RAW_DATA LONG NOT NULL,
JOINT NUMBER(1, 0) DEFAULT (0) NOT NULL,
RPTTYPE NUMBER(38, 0) NOT NULL,
OPTION1 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION2 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION3 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION4 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION5 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION6 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION7 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION8 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION9 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION10 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION11 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION12 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION13 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION14 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION15 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION16 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION17 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION18 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION19 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION20 NUMBER(1, 0) DEFAULT (0) NOT NULL,
REGION_ID NUMBER(38, 0),
RPT_TYPE_DESC VARCHAR2(40)
LOCK TABLE CB_REPORT IN EXCLUSIVE MODE NOWAIT;
DECLARE
CURSOR datacursor IS SELECT CB_RPT_ID, CB_ID, CB_REGION_ID, WHEN_PULLED, PARSED, RAW_DATA, JOINT, RPTTYPE, OPTION1, OPTION2, OPTION3, OPTION4, OPTION5, OPTION6, OPTION7, OPTION8, OPTION9, OPTION10, OPTION11, OPTION12, OPTION13, OPTION14, OPTION15, OPTION16, OPTION17, OPTION18, OPTION19, OPTION20, REGION_ID, RPT_TYPE_DESC FROM CB_REPORT;
datarecord datacursor%ROWTYPE;
BEGIN
OPEN datacursor;
LOOP
FETCH datacursor INTO datarecord;
EXIT WHEN (datacursor%NOTFOUND);
INSERT INTO "Tmp_CB_REPORT"(CB_RPT_ID, CB_ID, CB_REGION_ID, WHEN_PULLED, PARSED, RAW_DATA, JOINT, RPTTYPE, OPTION1, OPTION2, OPTION3, OPTION4, OPTION5, OPTION6, OPTION7, OPTION8, OPTION9, OPTION10, OPTION11, OPTION12, OPTION13, OPTION14, OPTION15, OPTION16, OPTION17, OPTION18, OPTION19, OPTION20, REGION_ID, RPT_TYPE_DESC) VALUES (datarecord.CB_RPT_ID, datarecord.CB_ID, datarecord.CB_REGION_ID, datarecord.WHEN_PULLED, datarecord.PARSED, datarecord.RAW_DATA, datarecord.JOINT, datarecord.RPTTYPE, datarecord.OPTION1, datarecord.OPTION2, datarecord.OPTION3, datarecord.OPTION4, datarecord.OPTION5, datarecord.OPTION6, datarecord.OPTION7, datarecord.OPTION8, datarecord.OPTION9, datarecord.OPTION10, datarecord.OPTION11, datarecord.OPTION12, datarecord.OPTION13, datarecord.OPTION14, datarecord.OPTION15, datarecord.OPTION16, datarecord.OPTION17, datarecord.OPTION18, datarecord.OPTION19, datarecord.OPTION20, datarecord.REGION_ID, datarecord.RPT_TYPE_DESC);
END LOOP;
END;
The copy works fine if I remove the long column from the CREATE TABLE "Tmp_CB_REPORT" statement
and the cursor copy statement. Any help is appreciated.What I think you should do is to turn your long into a LOB. LOBs are much malleable than LONGs. I suggest you have a look at the documentation for DBMS_LOB. You can create a function using DBMS_LOB that uses a temporary CLOB to reas your long column an dreturn a CLOB.
Cheers, APC -
How to copy attributes (as in which playlists) from one song to another
Hi,
Does anyone know how to copy the characteristics of a song--as in which playlists it appears in--from one song to another, so that the new song then appears on all those same playlists also? Or, if not, maybe you have some other idea for me:
I'm working with a Mac. I have several hundred playlists with ~100 songs each, and about 3,500 songs in my iTunes. Most of these songs are currently AACs. I've realized I have a problem: If I want to burn disks with MP3-format songs, I will need to convert the AAC to MP3s to burn them. If I don't want to have thousands of duplicate songs, I will need to trash the AAC versions of those songs from my library. If I do that, they will disappear from the playlists they are currently in (one song might be in 20 different lists). If I had to manually take each MP3 version created, look at which playlists the original AAC version is in, drag the MP3 version to each playlist, and delete the AAC version, it would take a Looooong time. Does anyone know of any shortcuts? For example, is there some way to copy the information about which playlists a given song is in and then paste that info onto the new version so it now appears also in these playlists? Or some other idea? Thanks very much!
MollyNever heard of any way of doing that. However, you may want to check out Doug's Scripts. There might be something there to help.
http://dougscripts.com/itunes/index.php
Best of luck. -
How to copy the same address for multiple contacts in Address Book?
Hi! I got a question, I didn't find an answer for yet.
How to copy the post address from one contact to another, without manual entering. I mean if I have one contact with already entered post address, can I just copy it someway at once to another contact?
I don't want cards to merge, I need separate contacts, that may have different phones, e-mails, but the same post address. Please, advise.Thanks! yes, this is a solution I'm following now. But I was wondering about the similar way as it is made in Daylite or Contactizer - you create company with name and post address first, and then can create a contact for that company. And company name and post address will appear in contact name.
I just wonder why such a simple and useful solution isn't available in Address Book as default.
I know there are many scripts written for Address Book. Maybe there is something for this purpose? -
How to copy a page( webpart page) with its content using client side.
How to copy a page(in my case webpart page) with its content(it may contain webparts) using client code (i mean using SPservices or ECMA script).
What i am planning is ,to give end user a page where it will contain text box to specify name of page and a button with the help of content editor webpart.
where on click of button we need to write client side code such that it should create a new page from a existing page in a library with given name by user.
Any suggestion would be helpful. For your information we can do it through UI with the help Site Actions / Manage Content and Structure.But i want to automate it using client side code.Server side code is restricted.
or can we create a template of an existing page with content without the help of sharepoint designer.
Thanks in advance
with regards RavichandraThis is good example
http://balajiindia.wordpress.com/2011/05/27/using-jquery-with-custom-web-services-in-sharepoint/
Create web service
http://balajiindia.wordpress.com/2011/05/27/using-jquery-with-custom-web-services-in-sharepoint/. Create method "Create Page" http://www.learningsharepoint.com/2010/09/17/create-publishing-pages-sharepoint-2010-programmatically/
Build your Java Script. You can use Content Editor Web Part if you want to avoid custom web part development http://www.codeproject.com/Articles/544538/JQuery-with-SharePoint
Oleg -
My external WD portable passport drive must be dodgy because I can't back it up or clone it or copy 3 of my 22 photo files to a new portable drive. I get error 36 as I attempt all 3 processes. I have copied my iPhoto library, iMovie events and most of my aperture referenced photos to the new drive. But cannot copy 3 files that contain the corrupted files showing just a grey triangle. I cannot delete or move to trash the corrupted raw photos.
How can I copy to the new drive any photos that aren't corrupted (grey triangle instead of photo or a photo that's just coloured horizontal broken lines) so I can then reconnect the referenced photos after copying them?
I am on late 2008 MacBook Pro with lion,
Many thanks
BwI've worked out how to copy and reconnect individual photos.
But can see that what's happening is that heavily edited raw photos are taking ages to load. Or not loading at all. And if opened go to the spinning wheel for 5-10 minutes. I am wondering whether to compress these or take them back to the originals or any other ideas would be very welcome.
Thank you
BW -
How to Copy Standard form in Smartforms?
Hi Experts,
can anyone tell how to copy a standard form in Smartforms.
Thanks in advanceHi Abdul,
We have to copy them to '800'. (this is your own company define client no)
All Standard Scripts and their respective print programs are listed in table 'TNAPR'.
Ex: FORM MEDRUCK has the Driver Program SAPFM06P.
NOTE: Never make any changes to the Standard Driver Programs
STEP 1.
Goto Transaction Code <SE71> and
select from Menu UTILITIES ->Copy from Client.
Enter the Standard Form Name, It source Client 000 and the target Form Name that you want it to be saved as on your client.
Say you are naming it as zmedruck1.
Click on EXECUTE.
STEP 2.
Converting form to English.
Open zmedruck1 in <SE71> With language DE.
Then goto UTILITIES -> Convert Original Language from DE to EN.
Then you can modify the layout for example, chaging the logo, or changing the headers, or adding any new code to do some calculation etc.,
SAVE THE CHANGES AND ACTIVATE.
Then select from the menu FORM -> CHECK -> TEXT.
SELECT your driver program name from the list adn click on COPY.
If you don't see the program name in the list then click on
'APPEND PRINT PROGRAM' and add your program name and then select it from the list and click on COPY.
STEP 3: Assigning our form to the standard print program.
Start Tr.Code <NACE>.
In our present case since we are working on 'Purchase order' we have to select EF and click on the button Output Types.
Then on Right hand side, scroll down and select NEU - New P O Printout.
(This may change for different programs).
Then Double click on Processing Routines on Left hand side.
Change from Display -> Change Mode.
Give your form name (zmedruck1) for printoutput and SAVE.
STEP 4:
Start Tr.Code <ME22N> since you are working on Purchase order and click on print Preview to make sure your layout etc., changes are OK. If not again you have to make the changes accordingly.
If every thing looks ok then you can print your form.
Regards,
Sathish:) -
Hi there,
Can anyone help me!? I know how to copy my music library to my new computer but struggling with copying the contacts etc. Where do I find the contacts folder on my old computer?
Thanks
KI had my iPhone 4S stolen last week and I am going to sync it to my computer to get everything back on it.
If it is stolen , how are you going to sync it?
You mean you got a new iPhone and you want to sync it to your computer?
Plug it in.
I know how to copy my music library to my new computer
New computer??? Or new iPhone?
I know how to copy my music library to my new computer but struggling with copying the contacts etc. Where do I find the contacts folder on my old computer?
I suggest you simply copy your entire User folder from old computer to new computer. This way all your data (Music, photos, contacts, emails, calendars, documents, etc.) goes across.
Maybe you are looking for
-
I just set up an account at the I tunes store including authorization to charge my pay pal abount. I have also received e-mail confirmation that the account is set up, but every time I try to make a purchase I get a message that says apple ID has not
-
Hello, While doing ABT1n , I am getting the follwoing error ; Data inconsistency: No revenue entered Message no. AAPO118 Diagnosis 1. You tried to post a retirement to asset 1000 100000001-0. You entered transaction type 0001, in which the 'retirem
-
Running multiple awaited Tasks in order
I am creating an app that requires to execute multiple awaited tasks in order or else the out come is disastrous. This current method executes all awaited task almost at the same time. Sometimes the Speech synthesizer runs before the stream is finish
-
Question regarding multi processes in ABAP
Hi We have written a ATC / Checkman Check Implementation. As we know the ATC / Checkman framework checks objects in object bundle of 50. Inside the check implementation we have to make a remote HTTP Call. That will be valid for all n instances. So th
-
JDK 1.6 SSL/TLS vulnerability
Hi all, I read SUN review about this vulnerability (http://java.sun.com/javase/javaseforbusiness/docs/TLSReadme.html). How can I set a client application to avoid renegotiation? sun.security.ssl.allowUnsafeRenegotiation=false ? Regards