How to copy bookdmarks to new hard disk drive

recently changed hdd on my laptop, used window s easy transfer to copy file , but my bookmarks and passwords were not copied, plese help

See:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Similar Messages

  • Satellite L300 - New hard disk drive info needed

    I own a Satellite L300 and have to replace the hard disk drive. I am in Korea and went to the service center, but they only couldn't replace the disk drive because they only had them in Korean, so I have to go elsewhere to get one in English (that's what I think I was told anyway) I don't know a whole lot about computers, so I am looking for some help.
    When I bought my computer it came with Vista pre installed, therefore I don't have an installation disk or anything like that. Because I am getting a new hard disk drive, will I also need to buy Vista and install it myself?

    Hello my friend
    I am a little bit confused after reading your posting. HDD replacement is so simply and can be done by everyone and I don't understand how the service couldnt be able to do this. for this action you need 10 minutes and can be done without manuals or some maintenance manuals.
    If you want to do this alone, please follow these steps:
    - turn notebook upside down
    - remove the battery
    - near the battery you will see HDD cover fixed with two screws
    - remove the screws and HDD cover
    - remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows
    - place the HDD pack on a flat surface (such as a desk), and remove the two black flat head screws with black head screws
    Please be careful with HDDs and do not apply pressure to the top or bottom of the drive.
    Vista OS
    New Toshiba notebooks are delivered without installations disc but recovery image is saved on HDD. When you start notebook for the first time you will see Toshiba reminder with info that you must create such disc alone using preinstalled Toshiba recovery disc creator. if you didn't create it and now the HDD is defective you have a problem. Either you must order new recovery media from Toshiba or you can use Microsoft installations disc to install Vista.
    If Ive forgot something please let me know.

  • I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

    I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • Copying OSX and Win XP partitions to a new hard disk drive

    Hi guys. I just upgraded my MBP to a new 160GB Hitachi HDD (from 100GB) but got stucked in copying/cloning Windows XP partition. I tried SuperDuper but it can only copy Mac partitions.(successfully and its currently running) Win XP partition cannot be recognized. I'm connecting the old drive in USB.
    Has anyone done this without going through the hassle of running (again) BootCamp, reinstalling Win XP and its related apps?
    Any thoughts/comments greatly appreciated. Thanks.
    Macbook Pro Mac OS X (10.4.7) MBP running OSX & Win XP
    Macbook Pro Mac OS X (10.4.7) MBP running OSX & Win XP
    Macbook Pro Mac OS X (10.4.7) MBP running OSX & Win XP
    Macbook Pro   Mac OS X (10.4.7)  

    You might try using the Restore option of Disk Utility. Basic procedure is:
    1. Open Disk Utility from the Utilities folder.
    2. Select the source volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Drag the source volume to the Source entry field.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Double-check you got it right, then click on the Restore button.
    Of course you will need to have the new hard drive pre-setup with a Windows partition equal to or larger than the source partition.
    Alternatively, you can boot into Windows with the new drive (already partitioned) and use Window's backup program to backup to the new drive.

  • Can I replace my new hard disk drive with my old one???

    I recently bought a new Macbook Pro 13' (mid 2012) and I wonder if I can put inside the hard disk (SSD) from my old Macbook Pro 13' (mid 2010)

    The hard drive itself should work. The only thing to be aware of is the operating system on the previous MacBook Pro. If it's older than the version your new MacBook Pro came with it may not run.

  • How do you query bios for hard disk drives?

    Is there any way to query the bios to find out the interupt address (i.e. 80x) of all the attached hard disks?
    Only I need to manually figure it out for installing grub or lilo.

    If you have a working Linux system installed you can do lspci -v, but it sounds like you are just installing, so you can't do this. Why do you need to know the interrupts for your hard drives for GRUB/LILO? I don't recall ever having to know this information to install either LILO or GRUB or even the FreeBSD boot loader.

  • Rescue and Recovery 4.31 - How to make backup for 2nd hard disk drive?

    What should I do that R & R version 4.31 (Windows 7, 64 bit) make backup for second hard drive?
    On the screen "Set Schedule and Preferences' in the options "Include partition" I don't have partition D: on my notebook and , of course, it can't be selected.
    ThinkPad W701ds, with two built-in disk drive (C: and D, backup is performed on the "USB External Storage Device '.
    Solved!
    Go to Solution.

    see this post http://forums.lenovo.com/t5/General-Discussion/Back-up-to-external-HD-7/m-p/322465#M9269
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • New hard disk drive under macintosh

    whenever i download something from internet e.g skype, it creates another disk drive sort of thing under macintosh. What is this all about? It starts to show that it has think much total space and this much available with skype name. Isnt it supposed to be just the software name?
    Please help!

    It's not a disk drive but an icon of the downloadeded file.
    For more details http://support.apple.com/kb/HT1148
    The "Total space and aviable space" setting is called 'Show Item Info' and be be toogled on/off by in the Show View Options (using the Command-J key-combo to get there).
    Stefan

  • Time Machine after installing a new Hard Disk Drive

    Sorry I just posted this to the Time Capsule section by mistake!!! Hopefully this is the right place !
    Having used my 1Gig Time Capsule for nearly 8 months the HDD failed last week on my MacBook. After replacing the HDD and after nearly 18 hours the HDD was backed-up again. BUT ! ! !.........
    ........ I no longer had access to any data saved prior to the new HDD installation. Time Machine does show back-ups back to 4 July 2008 ! (old and new data being saved in the same bundle), but prior to the new HDD installation they are greyed out. So I can't access back-ups made on my MacBook with another drive fitted. I ask myself what good is that ?
    Does anyone know how to work round this one please, or is all lost?
    Thanks for anyone who reads this and a bigger thanks for anyone who replies with a possible solution.
    regards
    David

    Great!
    But . . . you may now have another problem. TM may not delete the "old" backups in the normal fashion. When it needs to make room for new ones, it may start deleting the oldest of the "new" set instead.
    You can monitor this via your logs. Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window.
    Every time TM runs, it deletes "expired" backups (hourlies after 24 hours, dailies after a month), and each one is documented in your log. So most backups will have one deletion. Navigate in the widget from backup to backup (it will only go back a few days) to see which ones are being deleted. If any of the old set are/were deleted after the drive replacement, you're fine.
    If not, you'll have two rather bad choices: erase the drive (via Airport Utility) and let TM start over, or delete the old set, one at a time, via the TM interface. This is a tedious and time-consuming procedure, especially on a TC. Let us know if you need to do this, but don't know how.

  • New hard disk for HP Pavilion All-in-One MS228sc

    I need to get af new hard disk drive for my HP Pavilion All-in-One MS228sc. I have great difficulties in getting in touch with HP denmark since my product is out of waranty.
    My questions is if the PC can handle a disk larger than my current on on 500 GB. Further more I am not sure about other potential limits the PC could have ini regards to speed and other parameters on a new disk drive
    This question was solved.
    View Solution.

    As your computer is out of warranty, please purchase a 500GB - 2TB 3.5" SATA2 or 3 hard drive from an online or local retailer. If the new drive is an AF (Advanced Format) drive, you may have issues using the HP Recovery Media you created or purchased.
    If this is the case and you can still read the 25-digit Windows product key on the Microsoft COA affixed to your computer, you can install Windows 7 using this key. Please see "How to Install Windows 7 Without the Disc" for instructions on how to download Windows 7, create the installation media, and install Windows 7 using the 25-digit product key from the Microsoft COA on your computer. This method will not install any HP customizations or value-added software and you will have to manually install all needed drivers.
    Links to Windows 7 SP1 can be found HERE and HERE. (Download the Windows 7)
    Direct link to Windows 7 USB/DVD Download tool. (Use to create the media from the ISO)
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to make the RESCUE AND RECOVERY hidden partition when changing the hard disk drive

    I've got T61 and I'd like to know if is it possible (in case of changing the HDD) to make the RESCUE AND RECOVERY hidden partition  on the new hard disk drive? If yes - please let me know how to do that.

    hi you the rescue partition is made automatically when you use your recovery cd's on the new HDD so no problem there!
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Upgrading Hard Disk Drive of Lenovo THINKPAD T500 2055 ?

    Hi there,
    My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications as follows:
    - Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2).
    - 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston
    - ATI Mobility Radeon 3650 with 256MB.
    - 160 GB Hard Disk Drive, 7200rpm.
    I really need to upgrade the Hard Disk Drive to a bigger size (500 GB, 7200 rpm). and, my major questions are as follows:
    * Could you please advise me on which Hard Disk Drive (500 GB, 7200 rpm) should I buy for my T500 laptop?
    For example, I found (http://www.amazon.com/gp/product/B003NSBF32) But I have no idea what T500 supports and what it doesn't... Therefore, I need your help to guide me about this matter. In other words, How do you know if ABC-Hard Disk Drive fits with T500 and XYZ-Hard Disk Drive doesnt fit? What is the clue in knowing what T500 accepts?
    My another question is:
    * How easy is it to remove/replace Hard Disk Drive in Lenovo ThinkPad T500 ???
    I already watched CRU Removals/Replacements on (http://www.lenovoservicetraining.com/ion/R61_T61/index.html), But the clip is for ThinkPad R61 and T61. So, Could you please help me how to handle it with T500 ?
    I would greatly appreciate your inputs.
    Thanks for your consideration of my request, and I very much look forward to hearing from you soon !
    Solved!
    Go to Solution.

    Hi and welcome to the forum!
    Any SATA drive that is 2.5'' wide and 9.5mm high will work in your T500. The drive you linked to meets the requirement and thus will work.
    For removal and installation instructions, have a look here:- http://www-307.ibm.com/pc/support/site.wss/migr-71568.html
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • I own a copy of lightroom 5 (a download copy) and have had to install a new hard disk.  I can't remember how I obtained the current copy, but I suspect that i downloaded a trial copy expecting to install the license numbers and I may have downloaded a mon

    I own a copy of lightroom 5 (a download copy) and have had to install a new hard disk. I can't remember how I got the current copy but I think I may have downloaded a monthly rental copy because the program is asking me to pay a subscription fee.  I was expecting to get a message to install my serial numbers.

    You downloaded the trial version for the creative cloud. It doesn't work with a serial number. It is licensed differently. You will have to uninstall it and then download and install from here:
    Product updates

  • I have a hard disk drive with data that i want to back up onto another hard disk drive. I tried just copy and it won't let me paste it in the new drive. I have also tried to drag the files across and they won't go across. Does anyone know how to do this?

    I have an external hard disk drive with data that I want to back up onto another extrnal hard disk drive. I have tried to copy and paste but this wont give me a paste option. I have also tried to click and drag but it wont let me either. I have reformatted the external hard drive to accept both mac and pc files and this did not make any difference. Can anyone help me with this?

    How did you reformat the drive? If you formatted it as NTFS, your Mac will not be able to write files to it unless you use a small application such as Paragon's.
    Please reply as to how you formatted the drive.
    Clinton

  • How to restore my Ipod touch into a new hard disk/computer?

    Guys, my Laptop's hard drive was crash and all my songs and applications were the only copy I had. However, I had no idea how to restore my musics and application back to the library after I had replace a new hard disk. I went through online to check out some solutions but basically they required a software to retrieve those music and they cost money. I don't think I deserve this since I had spent $70 to get a new hard disk. The worst was mostly they only able to restore musics and videos. I don't think they're able to restore the applications, please give me some advises. Thanks

    You should always maintain a backup. If you fail to do this you are asking to lose your data.
    You can transfer itunes purchases:
    File>Transfer Purchases
    Unlike music and videos, you can re-download apps:
    http://support.apple.com/kb/HT2519

Maybe you are looking for

  • How to set-up BO Xcelsius Enterprise in a layered SAP BW landscape

    Dear all, We are implementing BO Xcelsius Enterprise next to an existing SAP Netweaver BW landscape (including SAP BW 7.0). We want to use the direct Xcelsius-SAP BW connection using the BI Consumers Services from EHP 1. Currently we're using a 3 sys

  • Is it possible to recover safari browsing history after history has been cleared?

    I have a 2012 iMac running Mavericks OSX 10.9.4 with a Seagate Backup Plus connected with Time Machine. I would like to restore safari browsing history to view some web pages from about two weeks ago. Safari history has been cleared. I think I need t

  • Lost script after re-downloading Adobe Story

    Hello, I am trying to find out where one of my scripts has gone, I had invested a lot of time into the script. My laptop was having problems so I recovered it, & re-downloaded Adobe Story. When Adobe Story opened, I noticed I only have one script the

  • Cannot launch the JDeveloper 10.13

    I cannot execute the Jdeveloper.exe. It says that there is an error with the jdevw.exe. When I try to launch the jdevw.exe it says "cannot find a j2se sdk insalled at path: c:\jdev1013\java.exe". I installed Jdeveloper1013 under the c:\jdev1013 direc

  • How do i update my itunes?

    I need help updating my itunes account. Every time I try, it redirects me to the apple website and wants me to download Itunes.... I'm confused. help??