HOW TO COPY BUISNESS CONTENT SOME  CHARACTERSTICS   AND KEY FIGURE I WANT

HOW TO COPY BUISNESS CONTENT SOME  CHARACTERSTICS   AND KEY FIGURE I WANT TO LOAD MY  INFOCUBE  PLEASE GIVE DETAILS SCREENSHOTS

HI,
Go through this url
[http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a66d5e07211d2acb80000e829fbfe/content.htm]
Regards,
Rajkandula

Similar Messages

  • How to add the required characterists and key figures to drill down report?

    hi,
    i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

    Hi Inna,
    Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
    layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
    Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
    Thanks for your understanding.
    Regards,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Maximum  number of characteristics and  Key figures used in a Query

    Hi Experts,
                Any Thought on the maximum number of Characterstics and key figures that can used in a Query. I know  it impacts performance query and runs for very long time.
    Thanks,
    Kumar.

    Hi Kumar,
    Welcome to SDN.
    I really did not think about it till now, sharing my thoughts on this -
    1. You can use all the characteristics & Key Figure ( & more)in Query what you have in you Cube.
    2. Query is suppose to serve a purpose, to deliver you analytics based on some KPI etc & it will have maximum no of char / key figures which human mind could make some sense of.
    3. Performance of query actually is divided into three areas -
    a. database time
    b. OLAP time
    c. Front End time
    and if you query on not performing well first look at which area is taking maximum time & the optimize that first & there are various ways to optimize each area.
    Hope it helps.
    VC

  • How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?

    Hi friends,
    How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?
    Will all the relevant objects will be copied ? or we need to copy one by one ?
    Do we need to create separate SWCV ?

    Thanks , Then the namespaces defined in copying object will automaticaly change  to copied object namespace?
    do we need to do anthing in SLD ?
    Normally , predeliverd contents are uneditable right ? when we are copying all , will they allow to change the scenarios and BPM  objects , like message type and interface type , mapping etc ?

  • How to copy the content in XMLtype column between databases

    Hi, there,
    Does anyone know how to copy the content in XMLtype clumn between databases? I tried insert as select via database link and it gives me the following message:
    SQL> insert into nrt_ot_request_temp (SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML )
    2 select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia;
    select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia
    ERROR at line 2:
    ORA-00942: table or view does not exist
    Thanks,
    Jessica

    Hi Jessica,
    in my eyes the second statement
    select ... xmlstring_column ... from table@remote_side;
    causes the error. Columns of type XMLString internally are stored as CLOBs in Oracle. Unfortunately there are restrictions on statements for CLOBs and remote locators.
    It seems you cannot say
    SELECT clob_column FROM table@remote_site;
    Remark: For me this is a showstopper for the datatype XMLString if you cannot run a simple statement like this one. It seems you can do an insert and an update but no select.
    On the other hand your first statement
    INSERT INTO table_local SELECT * FROM table@remote_site;
    should work following the documentation.
    See also
    http://docs.oracle.com/cd_a97630/appdev.920/a96591/adl04mng.htm#98328
    Best regards
    Indu Keilitz

  • Difference between copying cube content using datamarts and direct copying

    Hi Experts,
    I have been going through the SDN for the last 6 months  and this is my first post
    I know two methods of copying the cube content from one cube to another.
    One is data mart method in which we create a datasource based on the cube and
    then create a transformation between the new cube and datasource.
    This method is used if our source cube is in same server or in diff server.
    Other method is directly copying the cube content from source to destination
    by creating a transformation between two cubes .
    this is used if source cube anddestc u be are in same server.
    My  doubt is if both the cubes are in same server then what is diff between first method
    and second method,
    Please clarify me

    Hi,
    Now Iam closing this thread with a conclusion .
    The question is what is the difference between copying cube
    content using datamarts and direct copying
    Also what are there any other methods to copy cube contents
    from one cube to another.
    The  diff bet using data marts and direct copying is
    In case of datamarts,ven if the source cube is changed in futute there is no effect on the target cube.
    In case of copying directly,whenever the source cube is changed,the transformation becomes inactive.
    so we have to activate the transformation again.
    ALso there are some other methods to copy cube contents fron one to other .
    But datamarts is sap standard one.
    Thankyo every one for giving answers
    Regards,
    Sundar

  • How can i password protect some files and web sites?

    How can I possword protect some files and web sites on my mac air so others using my laptop can't access them?

    Set a password for your user; create other user accounts for when other people want to use it. You can create a "guest" login which gets wiped after every logout, if that's more appropriate for them.
    Matt

  • How to create a new Characteristic and  Key figure ?

    Hi !
    I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

    Hi,
    Instead of RSA1, use RSD1 to create Characteristics & Key figure.
    1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
    2. Enter name of the same & click on create transaction.
    3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
    4. always copy new key fig. or characteristics from standard.
    5. after creation activate the key figure.
    Hope this steps will help you to create Char. & key fig.
    Regards
    Sujay

  • How to create a document on a characteristic and key figure combination?

    Hello,
    I will need to create for my customer a document on a characteristic and key figure combination. I don't know yet which BW objects will be concerned, but I'm trying to understand how it works.
    1) I call the document screen in RSA1.
    2) I select InfoProvider data.
    3) I click on Create, enter a name and a description and go to the next register (Log.DOc.Properties).
    Question: What do I need to select here?
    According to SAP Help, the following has to be maintained:
    InfoProvider: How can I get my cube diplayed in the list?
    Query: Same question. But is it necessary to select a query?
    Key Figure: OK
    All characteristics for which the Characteristic is Document Property indicator is set: OK
    Hide Name: OK
    Thanks in advance for you help, Nathalie

    There's a link on the main support.mozilla.org page under "Customizing Firefox", to this article: [[How do I customize the toolbars?]] in case it helps you or anyone else finding this topic. It has a section on adding a new toolbar to Firefox.
    I can't help you on creating your own button, textfield and a combo box for the new toolbar but I see you (Dinesh) asked this question on Jan 5, here:
    http://groups.google.com/group/mozilla-labs-jetpack/browse_thread/thread/0d877e5afcbfe745# ''how to create a toolbar using add on sdk''

  • Fact table contains how many no. of Dim. ids and Key figures?

    Fact table contains how many no. of Dim. ids and Key figures?

    Max 233 KeyFigures,Max of (16dimensions*)248 DIM Ids?
    dim table doesnt contain Charateristics,but Primaray keys of DIM Ids + SIDs where as Fact table contain corresponding Foreign Keys and keyFiures
    Message was edited by: Murali

  • How do I turn the Dock off and on as I want?

    How do I turn the Dock off and on as I want? I don't mean Hide.... I mean off. It's using to much Free RAM and I need to occasionally turn it off to test RAM usage.

    Try resetting the dock using Terminal in the Applications/Utility folder to see if this will solve the problem.
    killall Dock

  • How to choose the characteristics and key figures for a cube

    Hi Gurus,
    To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?

    To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?
    Hi,
    For CO-PA since it is a generated DataSource, except for the common characteristics ( E.g. Company Code, Controlling Area ) where you get standard InfoObjects for all other Characteristics and Key Figures you end up creating custom or Z characteristics and key figures. This is unavoidable.
    Assigning points is the only way of saying thanks in SDN
    Thanks,
    Shan.

  • InfoSet in SAP BI 7.10 and Key figure aggregation

    HI SAP Gurus,
    I am new in SAP BI area. I have my first problem.
    I want to create a report for the profit of goods. 
    The cost of goods(cogs) are constant for each material for one month.
    The formula to calculate the profit of goods = sales turn over u2013 cogs of month *sales amount.
    I have defined in BW time dependent infoObejct with attribute cogs.
    I have 2 info Sources.  InfoCube for transactional sales data from R/3 and material cogs master data loaded from csv file each month to infoObject.
    The info Provider for report is InfoSet (transactional Cube and cogs infoObject) .
    My problems are
    1) When I create an InfoSet, SAP BW create automatically new technical name for all characteristics and key figures and the first technical name should be alias fr each InfoCube and InfoObject in the InfoSet.
    2) The new technical name infoSet erased my aggregation references characteristic (=calmonth)
    3) In the report the key figure cogs was aggregated for each customer sales and customers,    that means the value of cogs is not constant, when it is aggregated according to customer sales order.
    Thanks a lot for your support
    Solomon Kassaye
    Munich Germany

    Solomon find some code below for the start routine, change the fields and edit code to suit your exact structure and requirements but the logic is all there.
    4) Create a Start Routine on the transformation from sales DSO to Profit of Goods InfoCube.
    Use a lookup from the the COG DSO to populate the monthly COG field in the COG DSO.
    **Global Declaration
    TYPES: BEGIN OF I_S_COG,
    /BIC/GOODS_NUMBER TYPE /BIC/A<DSO Table name>-/BIC/GOODS_NUMBER,
    /BIC/GOODS_NAME TYPE /BIC/A<DSO Table name>-/BIC/GOODS_NAME,
    /BIC/COG TYPE /BIC/A<DSO Table name>-/BIC/COG,
    /BIC/PERIOD TYPE /BIC/A<DSO Table name>-/BIC/PERIOD,
    END OF I_S_COG.
    DATA: I_T_COG type standard table of I_S_COG,
    wa_COG like line of i_t_COG.
    *Local Declaration
    data: temp  type _ty_t_SC_1.
    *move SOURCE_PACKAGE[] to temp[].
    temp[] = SOURCE_PACKAGE.
    select /BIC/GOODS_NUMBER /BIC/GOODS_NAME /BIC/COG /BIC/PERIOD  from
    /BIC/A<DSO Table name>
    into corresponding fields of table i_t_COG for all entries in
    temp where /BIC/GOODS_NUMBER = temp-/BIC/GOODS_NUMBER.
    sort i_t_COG by /BIC/GOODS_NUMBER.
    loop at SOURCE_PACKAGE assigning <source_fields>.
    move-corresponding <source_fields> to wa.
    loop at i_t_COG into wa_COG where /BIC/GOODS_NUMBER =
    <source_fields>-/BIC/GOODS_NUMBER and /BIC/PERIOD =
    <source_fields>-/BIC/PERIOD.
    modify SOURCE_PACKAGE from wa transporting /bic/COG.
    endloop.
    endloop.
    5) Create an End Routine which calculates Profit using the formula and updates the result set with the value in the Profit column.
    Given your requirement for the profit calculation
    profit of goods = sales turn over u2013 cogs of month * sales amount
    Write a simple end routine yourself
    *Local Declaration
    loop at RESULT_PACKAGE.
    <result_fields>-profit = <result_fields>-sales turn over - <result_fields>-COG * <result_fields>-sales amount.
    modify RESULT_PACKAGE from <result_fields> transporting profit.
    endloop.
    As the above start and end routines are used to enhance your sales DSO, your fields for customer number and the sales order should already be in your DSO for drilldown.
    Let me know how you get on.

  • How to tell which infoprovider a char. or key figure belongs to?

    Hi experts,
    If a query is build form a multiprovider, how can we tell which characteristic and key figure belongs to which infoprovider. I am asked to change an existing query but am not sure which characteristic and key figure belongs to which infoprovider.

    If you know the name of the query that you are assigned to change then you can see which MP is used on that Query.
    Open your Bex analyzer-- Search your query and open it with change mode and click on Technical name button that is fourth one from rt. looks like some kind of mechanic tool. This will display name of MP and also all the CHAR and KF.
    Hope this will help.
    AKA

  • About value type and key figure type

    Hello Gurus,
              please explan the different usage of about value type and key figure type.  what is the typical values for both infoobjects ?
    Many thanks,
    Frank

    Hi,
    0METYPE is a key figure-specific info object usually used to define semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values).
    Its a bi specific field which is filled from extract structure field named MEASTYPE table COSR
    Refer to OSS Note 523742 for how it is filled and the following link for additiona information.
    http://help.sap.com/saphelp_nw70/helpdata/en/91/ddd52b9ef30645a338e28aae443807/frameset.htm
    Note 523742 - BCT-CO: BW key figure model and R/3 tables for trans. data
    This note provides information on the key figure model in the area of BW Content CO-OM. It also gives an overview of the DataSources for transaction data and the corresponding source tables and value fields in the R/3 System.
    The key figure model for currency fields in the area of CO-OM contents affects the following info object of type key figure:
    0AMOUNT Amount
    The key figure itself does have any business semantics.
    The semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values) is determined using combinations of values for the following key figure-specific info objects (see also the account model in SEM-BPS, note 407563):
    0METYPE Key figure type
    0VTYPE Value type for reporting
    --> 0VTDETL Details of the value type
    --> 0VTSTAT Statistics indicator for the value type.
    For example, using transaction SE16, the possible characteristics of the values of this InfoObject can be taken from the above-mentioned master data tables in R/3.
    The business key figures on the InfoCubes of the standard BW content were defined as restricted key figures using this semantics of the key-figure-specific characteristics.
    The conversion of the R/3 transaction data in the BW key figure model is carried out in the extractors using the ROMI_GET_VTYPE_AND_DETAIL function module. It primarily happens using the specified conversion tables.
    The following dependencies exist for the source tables of the DataSources:
    COSP_VTYPE for COSS, COSP, COVP,
    COSB_VTYPE for COSB,
    BPXX_VTYPE for BPGE, BPJA, BPEE
    If an R/3 source record cannot be converted using these tables, it may not be extracted to BW.The application log of the R/3 DataSource transaction RSA3 contains entries for the unconverted values after the test run.(The log function for the CO-OM DataSources was considerably improved by the correction for note 523655).
    The application log for the extraction runs from BW can be evaluated using transaction SLG1 (Object: RSAP, object information: RSAP_INFO)
    Furthermore, the semantics of a key figure are still determined by the time characteristics and the following key-figure-specific info objects:
    0CURTYPE Currency type (for more information, see note 517909),
    0DB_CR_IND Debit/credit indicator (for more information, see note 065075),
    0VERSION CO version
    -Vikram

Maybe you are looking for