How to copy changes to Productive client? URGENT!

SAP has a note related to the payroll module which we had to apply to Client 000. We were able to use SCC1 to copy from Client 000 to Client 200 in our QA environment.
However in Production we are unable to use the same method due to our SCC4 settings.
SAP revert that we cannot use SCC1 in Production and that we should identify the changes and tie to table changes to a transport request and transport to Production.
Can anybody please advise what is the best way to copy the changes to Productive client?
Thank you.

Hi,
If that Org is with in the Parent Org unit, you can do.
Good Luck
Om.
<b>Reward</b> ponts are always appreciated.

Similar Messages

  • Report copied at FGRP,how to execute it at production client?

    Dear all,i've copied a report done using report painter ( FGRP ) and i already transported it from developmet to production client. but the problem i am facing now is,how should i execute the report? where should i execute it? pls help. Thanks

    check Ke30? where u defined Form for that report .
    if u want to create tcode , then do the same way what sugg.by anji.
    regards
    Prabhu

  • How to copy a file from Client to Application Server

    Hello,
    My requirement is user selects a file from Browse button on oracle form - this location is on client side, and have to copy this file on Application server.
    I tried using webutil_file.copy_file function but it gives error - copy_file is not a procedure or is undefined.
    There is another way of Client_to_AS but it needs some changes in configuration files of webutil, which is not allowed in our scenario.
    Source - client machine resident file
    Target- Application server disk location
    So can any one help in this regard?

    Hi Francois,
    Thanks for your suggestion, actually i didnt want to use Client_to_As as client doesnt want to make any changes in any configuration files, no matter how small the change is.
    Anyways we are able to successfully copy the file using Client_to_AS, but one thing that i couldn't understand is why was our webutil_file.copy_file function failing?
    Any hint about this?
    Thanks!
    Avinash.
    Pune- India.

  • Effects of delecting purchasing groups in production client - URGENT Please

    Hi All,
    If an existing purchasing group is deleted from the production client will it affect any of the open purchase order or any other functionality.
    Thanks in advance.Please respond.
    Thanks & regards,
    Navin

    Yes,, If any purchasing document yoou willl bring in a change mode then system will give an error, adn you can loose the reporting facility by purchase group.

  • How to see changes in production order...w/o using OCM...

    Hi
    As far as i know without OCM; we can't see changes made in terms of quantity, dates in production order
    But is there any alternative way, table or something which shows me changes made in atleast either of two i.e. quantity / dates for a production order
    Please give some hint....
    Rgds
    Edited by: Vicky Khabrani on May 9, 2008 6:37 AM

    Hi Pradeep
    Thanks for your reply....So this means there is no way out....
    By the way in COOIS; where can i see below things...I can't see them.......
    Choose following field from "Choose field option"
    Changed on
    Changed at
    Last changer.
    I guess something is wrong....Above fiels are not appearing in COOIS
    Rgds

  • How to copy tax procedure TAXINJ from Client 000 to Dev client in ECC 6.0

    Hi,
    We are facing a problem for TAXINJ and TAXINN procedure, which are not available in our development client, but available in client 000.
    Please advice how to copy those procedures from client 000 to development client.
    (In client 000, we can not create a trabnsport request).

    Hello ravi,
    first  check  whether there request being generated at the time og customization in the server where the standard procedures exist.
    if yes,then you just need to change a little bit of description of these procedures and save system will ask for the development request or customization request.,you can then ask the basis guy to transport it.
    remember it is only a work around solution.
    nevertheless you can also create it manually
    revert if helpful
    Mohit Singh

  • How do I change the default email client from Thunderbird to Gmail in FF 3.6.17?

    Using Mac, OS 10.6.7 and Firefox 3.6.17
    When I click on an email address link, Thunderbird launches, but I want always to use Gmail. How do I change the email client from Thunderbird to Gmail?

    THANK YOU SO MUCH, Tony!
    I knew it had to be pretty simple...I just couldn't find the exact location to make the change. Now done. What a relief!!!

  • Config for Production client

    Dear all,
    I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
    In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
    How do we config for Production client to cover this requirements ?
    Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
    Thank you very much.
    Regards,
    Thanh.
    Do not use text message language, the next time your thread will be deleted.
    Read the "Rules of Engagement"
    Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

    You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
    Note 1497640 - Open and close periods in productive client
    You can theoretically put every customizing view there and make it "executable" in a production system.
    Markus

  • Need to set productive client in SAP PI netweaver 7.4

    Dear Experts,
    I need to set new client 100 as productive client in SAP Netweaver 7.4 PI server.
    Please help me finding the link.
    Also i need to patch only Java instance through SUM so how should i proceed in registering system in MOPZ and further steps,please help
    Warm Regards,
    Sumit

    Hi Sumit,
    I need to set new client 100 as productive client in SAP Netweaver 7.4 PI server.
    Please help me finding the link.
    What is the current configuration of Production system and why you want to change the Productive client ?
    Also i need to patch only Java instance through SUM so how should i proceed in registering system in MOPZ and further steps,please help
    Please configure SAP solution in solution manager for your Landscape. Post this use MOPZ functionality to generate required stack file.
    Hope this helps.
    Regards,
    Deepak Kori

  • Change the Product version from ECC to ERP 6.0

    Hello Experts
    I am planning to apply EHP4 on my Development ECC system. In line with the the suggestion from guide "How to install SAP Enhancement Package 4 for SAP ERP 6.0" system I am supposed to define my ECC system with leading product version ERP 6.0.
    My Ecc system is currently defined with Product version SAP ECC 6.0.
    As per the above guide and also suggestion from "Note 1344564 - Maintenance Optimizer: Check system landscape" which says-
    "In particular for a system of the product SAP ERP, assign the product version of SAP ERP, not SAP ECC."
    I am supposed to change the leading product version to ERP 6.0.
    Now with the current definition of system with product version SAP ECC 6.0, it is being used in a logical component. In order to change this I need to delete the associated logical component. The problem is -this logical component is being used in more than one Project definition that has huge documentation associated with them.
    My question -
    will the deletion of current logical component affect my documentation in any way?
    How can I change the product version from SAP ECC 6.0 to SAP ERP 6.0 without affecting the current setup?
    Regards
    Dhiraj

    Hello Warren,
    Thanks for the suggestion.
    I have already taken care of all the suggested notes in the master note that you suggested. I am able to generate the XML file for other solution defined in my system. In those I have my ECC system defined purely as ERP 6.0 system. I am not able to make out why its not generating the XML for this solution.
    Regards
    Dhiraj

  • How to use 0vtc in production although prod. isn't allowed for customizing

    Hi,
    I have created some routes and want to add transportation service agent datas into these routes by using 0vtc transaction code. But in the client that we are using for customizing we don't have and don't create the service agent master data and we can't customize 0vtc in production as customizing is not allowed in that client.
    I need to learn how to use 0vtc in production client although production is not allowed for customizing.
    Thanks beforehand.
    Nuran.

    Hi,
    Are you trying to do configuration in Production system?
    Production systems are locked for configuration, you can not do any configuration in prodcution client other than some manual configurations. Your T code 0VTC is not a manual configuration so you can not do it production. And ruotes are defined as master data, use LSMW to upload the route data in prodcution. Ask your Basis team for authorization to do the same.
    Regards,
    K.Annadurai.

  • Need help with changing the product name for a HP LaserJet Pro 401n to use on a ePrint network.

    I am in a school environment, naming printers is imortant. 
    Bonjour Service Name and Device Description name have been changed. IOS7 devices see the Bonjour name but ChromeBooks see the Product name. How can I change the Product name on the printer so that it is then recognized by HP Connected and shown to ChromeBook devices?

    You should be able to change the product name in Google Cloud.  The ChromeBook uses Google Cloud to print (Google Cloud uses HP ePrint).  Log into your google account and change the printer name there.
    I am an HP employee.
    Opinions expressed are mine and do not necessarily reflect the opinions of HP.
    Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

  • How to Changing Productive Client in an ABAP+Java System?

    How to Changing Productive Client in an ABAP+Java System?

    1. Log on to the ABAP system.
    2. Call transaction SPRO.
    3. Go to SAP Solution Manager Implementation Guide -->
    SAP Solution Manager --> Basic Settings --> SAP Solution Manager
    System --> General Settings --> Client Copy
    4. Perform the following steps:
    a) Maintain Profile Parameters
    b) Create Client
    c) Copy Client 000
    d) Convert UME

  • How to copy production client to development client

    Hello All,
       I have developed one report inwhich I call screen(module pool).My report name is zco11 as well as screen name is zco11.It is working fine and I transported it into production client(900).Now I rename the
    report name as well as my screen name in my development client(300).So now my screen zco11 and screen zco11 is not there in my development client(300).Now I want to copy my zco11 report as well as my screen zco11 from production client(900) to development client(300).is it possiable? if yes then how?
    please help.
    Thanks,
    Rakesh

    hi
    you cant do it yourself.just need to contact your basis team for setting up transports from production Developement.
    you can try System copy as well.
    hope this helps
    regards
    Aakash Banga
    Edited by: aakash banga on Jan 21, 2009 11:53 AM

  • How track changes in production order which is already Read PP master data

    Hi Gurus,
    Due to some unavoidable reason my client has to do Read PP master data time and again, now my client having a requirement that want to see what has been changes in Production Order.
    We already created 1 report for that which tracks whatever has been changed in Production Order but having a constraint in it.  That It could not be able to distinguish to which order READ PP MASTER DATA done.
    So my query is how to map that in report. As sytem Status directly changed to CRTD phase.
    Any table which can track the changes once the order been through with READ PP MASTER DATA?
    As there are huge number of Production Order so we can go and open each order to see the Status changes in each and every order.
    Hope to get a reply soon.
    Regards,
    Sap User

    Hi,
    A suggestion:
    Change the specification as, log changes at each save instead of Read PP Master Data, as the changes would become effective only upon save. So if this is acceptable then 2 options, 1. Go with OCM feature or 2. Refer note - 390635
    Revert if you face any issues.
    Regards,
    Vivek

Maybe you are looking for