How to copy clips from iMovie to iPhoto

I copied photos from iPhoto and created a project in iMovie - had a senior moment and deleted the photos from iPhoto and would like to copied them FROM iMovie back to iPhoto - cannot find how to do this.
Help - a Desperate Grandpa

Thanks but nothing happened - I right clicked to REVEAL IN FINDER and nothing happened - realize that the source should have shown but because I deleted it in iPhoto, that's apparently gone. Now there isn't a 'pointer' from iMovie to anywhere.

Similar Messages

How to copy clip from iMovie to a cd or dvd

Hello. I copied an entire (short) video from a CD made on a pc (.wmv file) to iMovie by dragging it to the clip pane . then I split it to use only a small portion of the movie. I split it into 5 small clips and used transitions to connect. My result looks fine in previewing it. Now, can I copy this movie into an existing Power Point presentation in full quality but not Quicktime (I hav PP on iMac in my Microsoft Office for Mac program), so I can save it and use it on a Windows pc at work? (I tried saving in high quality Quicktime, but the subject video still goes into PP in quicktime format with reduced-quality video that does not look nearly as good as the original or the clips I previewed in iMovie). thanks. JB

Export/Share the clips out as Full Quality DV Quicktime movies. There should be NO compression done and no quality loss. Then see if your Power Point will take those.
Patrick

I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for that.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

How to copy project from iMovie 11 to iMovie 10?

I get confused on iMovie naming, so let me start with this: I have projects and clips in the old version of iMovie, iMovie 11. When I click on iMovie > About iMovie, it shows the version as 9.0.9. I will refer to this as iMovie 9.
I also have the projects and clips in the newer version of iMovie. When I click on iMovie > About iMovie, it shows the version as 10.0.3. I will refer to this as iMovie 10.
I want to copy a project (the set of video clips. audio clips, titles and transitions) from iMovie 9 to iMovie 10. Can someone explain how to do this?
With the recent update of iMovie 10, a number of my projects now appear as "Missing File". They appear to have been corrupted or lost in the upgrade. i still have the original projects in iMovie 9, but do not know how to copy them over to iMovie 10.
I do not want to do a mass replacement of projects in iMovie 9 to iMovie 10, as some of the projects in iMoive 10 have been edited with newer content. I want transfer selected projects form iMovie 9 to iMovie 10.
Any help is appreciated ...

pomme4moi wrote:
I get confused on iMovie naming, so let me start with this: I have projects and clips in the old version of iMovie, iMovie 11. When I click on iMovie > About iMovie, it shows the version as 9.0.9. I will refer to this as iMovie 9.
iMovie '11 (as in 2011) is version 9. The new version iMovie is version 10. Yoou see it sometimes refferred to by Apple as iMovie (2013).
I want to copy a project (the set of video clips. audio clips, titles and transitions) from iMovie 9 to iMovie 10. Can someone explain how to do this?
I do not want to do a mass replacement of projects in iMovie 9 to iMovie 10, as some of the projects in iMoive 10 have been edited with newer content. I want transfer selected projects form iMovie 9 to iMovie 10.
Projects and Events cannot simply be copied from version 9 to 10, the files themselves must be updated. Unfortuantely, Apple only offers an all or nothing method for doing the updating as described here:
http://support.apple.com/kb/HT6012?viewlocale=en_US&locale=en_US
iMovie 10 will only update the contents of the iMovie Projects an iMovie Events Folders used by iMovie 9. So you could get an external hard drive and use iMovie 9 to move all the Projects and Events that you don't want to update to version 10 to the external.
http://support.apple.com/kb/ph2289
Disconnect the external drive and run the updating from iMovie 10.
However, it may be just as easy to update everything and then delete any Projects or Events you don't want in iMovie version 10.
Matt

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas?

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas? (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

How do I import individual frames from iMovie into iPhoto?

How do I import individual frames from iMovie into iPhoto? Or how do I export individual frames from iMovie into iPhoto? My final goal is to have a DVD of individual photos from a video I recently shot. Thanks

Here is one way to do it, although you will see there could be variations.
1) Open iMovie
2) Start a new project - name it Stills for iPhoto (or a name of your choice)
3) Go to your EVENT. Find the spot with the cursor that you want a photo of. Right-click (or control-click if you don't have a mouse) and select ADD STILL FRAME TO PROJECT.
4) The photo should be in the Project called Stills for iPhoto.
5) Right-click (control-click) on the photo and select REVEAL IN FINDER.
6)When the finder window opens, right-click and select COPY. Go to your Desktop or a folder of your choice and right-click PASTE
7) Drag the photo from your Desktop to iPhoto

How do i move photos from imovie to iphoto

How do I move photos from imovie to iphoto?

You cannot put photos in a trailer. They are designed for videos.
However, there is a way around this.
Go to the Project Library view. Select your Trailer. Now, click FILE/CONVERT TO PROJECT.
Now you can add photos.

How do I delete video clips from imovie on IPAD?

How do I delete video clips from imovie on IPAD?

BTW, I went into Photo and deleted most of the unwanted videos and photos but 1 photo stubbornly stays in the area for editing and I can't find a way to close it in order to delete it. Help!

How do I empty all clips from imovie 9.0.4

I can't empty all the old clips from iMovie, please help.

Buy iDVD.
Yes, there are other programs that will put a movie on a DVD. I have tried most of the other substitutes. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
IDVD is easy to get. It is available on disk as part of iLife 11.
IDVD is a wonderful piece of software and well worth the low cost of $40. (works with all Mac OS 10.5 and newer.)
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U

Keynote and clip from Imovie HD

Hello (and sorry for my english...)
When i copy a clip from Imovie in Keynote, it is the original clip that is copied (and not the clip i elagued).
Is everybody knows how to copy a clip from imovie to keynote that is not an original clip?
Thank you
Doudouche

http://www.bulletsandbones.com/GB/GBFAQ.html#toofast
(Let the page FULLY load. The link to your answer is at the top of your screen)

Preview disabled, importing clips from imovie

I just got a Canon Optura 60 video camera.
I'm in a hurry to get the clips into final cut and the log and capture procedure is time consuming and confusing.
plus my preview is disabled in the log and capture window and I just read a long thread about this problem.
it seems to conclude that the solution is to deinstall quicktime 7 reinstall quicktime 6, which I can't do with 10.4.
I already figured out how to easily get the clips out of the camera and into iMovie, but I want to edit in Final Cut. I have a LaCie 250gig hard drive for media storage.
Is there an easy way to import the clips from iMovie to final cut pro HD 4.5? thanks

so far, by logging in the clip I even got preview to work, and the final cut is moving the clip around in the camera. but I still haven't managed to actually capture the clip. when I try capture now, it justs waits for time code.
when I log in the clip and click on capture clip, the clip appears in the preview window, and then I get an error message: "unable to locate a specified timecode. you may have specified a time code with insufficient room for a pre/post roll operation"
so how do I enter the time code?
or could it be that I did not enter time and date on video camera?
If anyone knows of a step by step book for idiots that says 1, plug in firewire, 2 go to log and capture, and so on, I would happily buy it.
thanks ever so much

Importing clips from iMovie HD to FCE4

Hi. Have read with interest a couple of questions on this same issue, with the advice from Tom Wolsky seemingly being to not mix the two applications and just get stuck in with FCE. However, i'm finding FCE difficult to like/get to grips with. But more importantly, after attending some Apple onetoone sessions, it seems my Canon camcorder might be a little long in the tooth and there may be some tape slippage as I was getting time code errors when trying to import directly to FCE. The fix seemed to be to capture the footage via iMovie and import to FCE using 'show package contents' route. Having now though imported some footage from a second tape, I have some of the clips showing as Offline for some reason. Is the trick to import clips from IMovie as per Tom's suggested route on 9/8/08?

I import video from my camera into iMovie 4, because that is the last version of iMovie, I believe, that was capable of flushing unwanted video off the hard drive, and I can bring an entire tape into iMovie, trim it down for FCE, and then get rid of the unwanted footage. iMovie 6, like Final Cut Express, is a nondestructive editor and can't erase unwanted footage from the hard drive, and as you know, video uses up hard drive space FAST. To get rid of discarded edits, you either have to use iMovie 4 or Final Cut Pro.
iMovie is also much easier to import video into than Final Cut Express, with all the latter's complicated controls. With iMovie, you just plug in your camera, iMovie then says "Camera Connected," and you hit Play and Import. Stone simple. Also, in iMovie you can hear the audio as it comes in, and if I remember right (it's been a while since I did it in FCE), you can't hear your audio tracks as your video imports into FCE. Not a big deal, but an annoyance.
Once the video is in iMovie, then I cut and trim the video to get rid of all substandard/unwanted stuff, and then Empty Trash, which erases the unwanted video off the hard drive, saving mucho space over the course of a project. Otherwise, you're just stuck with the unwanted video, and all it does is fill up your hard drive. Then you export (or "Share," in iMovie parlance) your video from iMove as a QuickTime movie, and drop that QT movie into Final Cut Express's Browser. Then create your FCE project from it.
The only objection I have ever seen to this procedure is people complaining that their QuickTime movie from iMovie has to be rendered in FCE before FCE can use it, and this takes a bit of extra time. Well, that's true, unless you export your video from iMovie in a form that FCE can use natively. Then it doesn't need to be rendered at all--it's just as though you had imported it from the camera directly into FCE. Most people don't know how to set up iMovie to do that.
Here's how I do it: (this is iMovie 4; I assume other versions are the same), Select Share > QuickTime and choose Expert Settings. On the next screen, select Export: Movie to QuickTime Movie, and click the Options button. In the Movie Settings window that this brings up, on the upper (video) part of it, under the Video checkbox, click the Settings button there, and for Compression Type choose DV/DVCPRO-NTSC, and under Compressor Quality, move the slider to Best, and click OK. Under the Sound checkbox, click Settings, and then choose Linear PCM, Stereo, and 48.000 kHz for Sound Settings. Under Render Settings, choose Qualty: Best. Just below that, uncheck the "Prepare for Internet Streaming" box. Then click OK, and the window will go away, and you're ready to export.
Give the video a name, and a place to save to, then click SAVE. The QuickTime movie that results from this can be dropped straight into FCE and requires no rendering; it works just as though you had imported it directly into FCE from your camera.
Tom B.

Importing clips from iMovie project (they keep ending up in the trash)

I have never tried to import other clips from another iMovie project before and I just tried it yesterday. This is what I did:
-I went into the other project and clicked on each individual clip from that project that I wanted (one at a time).
-I copied that clip and then saved it to the desktop
-From there I copied those clips to my external drive (which holds the new project that I am working on
-I then opened up the new project in iMovie
-I went to File<Import
-I selected the clips that I had copied over to the external drive
-I imported them
-They all showed up fine, they played fine and I was able to edit them and put them into the time line as well
The problem I face though is after I save the project and exit, the next time I open the project, each of those clips are missing and have been placed in the trash
What am I doing wrong?
Thanks ahead of time for your help!

It sounds like something may be preventing iMovie from properly saving the project on the external drive. The drive format may be wrong, or third-party software might be causing conflicts. More here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
Another possibility is that you are opening the wrong project file saved inside the iMovie 5 project. If your project was originally an iMovie 4 project converted to iMovie 5 that's an easy mistake to make. More here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1971832
Note that the copy/export/import routine you used can be simplified enormously. iMovie 5 lets us Copy and Paste clips much more simply. To copy clips from Project A to Project B, open Project A, select all the clips you want copied to Project B, choose Edit > Copy, open Project B, move the playhead where you want to place the clips, and Paste. iMovie will import all the files that support those clips from Project A to Project B. Note that it imports the entire file for the clip, not just the clip itself. That's so the clip inherits all the non-destructive editing features it had in Project A.
To avoid Project B becoming unnecessarily large, it's important to Copy and Paste all the clips you want together. If you copy two clips at the same time that share the same file iMovie imports their source file just one time. But if you Copy and Paste two clips that share the same source file separately, iMovie imports the same file twice.
Karl

Can I copy clips from one project to another? The clips are still frames captured within a video event.

Can I copy clips from one project to another? The clips are frames saved as stills from a video event. I try the copy & paste but it does not seem to work.

The video was converted into MP4 and then I could get it into iMovie events. I had right clicked and saved farmes as stills. ABout 50 of them, When I tried to copy and paste those stills into another project I couldn't. They came up blank.
I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them. So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it. (This is for a 1961 Class Reunion, so it's old stuff). Seems to work so far.
So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else. Do you know a way around this?

How do I export from IMovie when "not enough room in Heap Zone" error code appears? How can I correct, what to Do.."export movie" insteand of Media browser or IDVD? Finalize movie? I want to burn it to DVD!

How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted.
I shortened the movie, that is no cure...Correcting date info on clips does not pertain. Why would Apple throw roadblocks in your way without solving problems they create?
A techie made an appointment on the phone and was totally incapable of addressing the problem.
What is a heap zone????

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

How to copy clips from iMovie to iPhoto

Similar Messages

Maybe you are looking for