How to copy CO Document Number Ranges in KANK.

hi , experts
I need to config CO Document Number Ranges in KANK.
I want to copy the existing group and elements from controlling area 0001 (provided in SAP) to my controlling area.
But, there is an error message saying that my controlling area and the controlling area 0001 have different elements and thus can not be copied.
Why is that?
And, how to copy it so I can have the same groups, intervals, and elements with controlling area 0001?

Hi
Assign the object first, before copying the number range.
Like for
Primary postings                                       01.......................
COIN CO Through-postings from FI
KAZO Down payment
Planning transactions                     02........
FIPA Payment scheduling
KAZP Plan cost center accrual
KOAP Plan settlement
KPIV Actual cost distrib. cost obj.
KPPB Standard cost estimate
SKS

Similar Messages

  • How to control Held documents number ranges

    Hi Gurus.,
    pls tell me How to control Held documents number ranges.,
    its urgent .one of my client asking separate number ranges for held documents
    with regards
    ramesh

    Dude,
    I understand you are refering Hold Document not Park document. Becoz Park document use the same number range which is used for normal document posting. However, for Hold Document Number ranges, i advice you to liaise with your Abaper for BADI/Exit/ or etc etc.....for maintaing a specific number range or validation of number given.
    pls assign point if useful

  • How to create a validation for a certain document number range?

    Good Day!
    May I just seek assistance on how to limit a certain document number range from normal posting via F-65?
    The scenario is I would like to restrict, say for example Document Number range 07 from transaction FBV1. How do I create a validation for that? I was thinking what to put up in the Check field in the validation.
    This is how I set up the pre-requsite for the validation rules:
    Pre-requisite:  Transaction Code = FBV1
    Thanks!

    Ok great.. Thanks a lot for the help.If I may just ask one more? =)
    What if the scenario is say creating a validation for a certain GL account group?
    Scenario: User would like to restrict the transaction FBV1 from posting to a GL account group (e.g. G007) ?
    I checked the list of tables and fields in validations, but it seems that the GL account group is not part of the list.
    Any help would be greatly appreciated.

  • Document number range object

    Hi
    Please tell document number range object . T-code :FBN1
    PLEASE URGENT
    Thanks
    Krishna

    Hello
    A number range must be assigned to each document type in the SAP System. Via the document types, you distinguish the postings according to the different business transactions, for example customer payment, vendor credit memo, and so on. To store documents separately according to document types, you must assign a separate number range to each document type, for example to invoices or to credit memos.
    In the following activities:
    You define your document number ranges.
    You can determine which intervals of document number ranges are to be copied from one company code into another.
    You can determine which intervals of document number ranges are to be copied from one fiscal year into another.
    Define Document Number Ranges
    In this IMG activity you create number ranges for documents. For each number range you specify (among other things):
    a number interval from which document numbers are selected
    the type of number assignment (internal or external)
    You assign one or more document types to each number range. The number range becomes effective via the document type specified in document entry and posting.
    You can use one number range for several document types. This means you can differentiate documents by document type but combine them again for filing the original documents, provided you store your original documents under the EDP document number.
    Note
    The type of number assignment is of special importance. For each document type you should check whether a separate number range must be used and which type of number assignment is most appropriate.
    One example of a case where external number assignment would be suitable is when you transfer documents into your SAP system from a non-SAP system. The numbers must be unique. The number range is not displayed with external numbers. You must therefore ensure that you do not skip any numbers when entering numbers manually (for organizational reasons).
    You should use internal number assignment if the original documents do not have a unique document number. This is the case, for example, with vendor invoices.
    Number ranges for documents are company code-dependent. You must therefore create your number ranges for each company code in which the document type is used, namely with the same number range key.
    The number intervals must not overlap. If you use year-dependent number ranges, you can specify the same interval with the same key several times for different to- fiscal years  (the limit up to which a number range is still valid). If you want to define number ranges which are independent of the to-fiscal year, enter 9999 in the to- fiscal year field.
    Caution
    For sample documents, use a number range with key X2, for recurring entry documents with key X1. These keys may not be used for other number ranges.
    Recommendation
    Store your original documents (paper documents) under the EDP number of the SAP System. You should write the EDP document number on the original document. In this way, the original document for a business transaction can be found at any time.
    Activities
    1. Determine how document filing is to be carried out in your company codes.
    2. Define your number ranges accordingly.
    3. Make sure that the number ranges are assigned to the corresponding document types.
    Copy to Company Code
    In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
    Intervals which are copied
    To fiscal year(s) (validity limit up until which the number range is valid)
    Company code from which you copy (source company code)
    Company code(s) into which you copy (target company code(s))
    Activities
    Make all necessary specifications for copying the number ranges.
    Note
    The number ranges are only copied into a target company code if no number ranges exist there within the selected "To fiscal year" interval.
    Notes on transporting
    The documentation for the step "Define document number ranges" describes how to transport document number ranges.
    Copy to Fiscal Year
    In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code. To do this, you have to define the following information:
    Company code(s) within which you copy
    Number range number(s) which are copied
    Fiscal year from which you copy (source fiscal year)
    Fiscal year into which you copy (target fiscal year)
    Activities
    Make all necessary specifications for copying the fiscal years.
    Note
    The number ranges are only copied per company code into the target fiscal year if no intervals exist there for this fiscal year.
    Reg
    *assign points if useful

  • Accounting Document Number range error

    Dear All,
    As per my client requirement 3 types of billing document is thier. SD Consulant maintain the number range below
    1. Domestic billing (Number range between 000040000- 0000401000 )
    2. Export billing (Number range between  0000900001-0000901000 )
    3. Cash sales billing (Number range between  0000900001-0000901000 )
    In VF01 billing is saved for above billing documents. But not posted into Accounting Documents.
    I am gettin error " Incorrect Doc Number 40000 select the document number between 9000001-901000"
    In my understanding FI Consulant maintain the same number range the Account Document automatically posted in to Accounting. How to maintian the 3 number range in FBN1.Plz help me.
    Thanks and regards
    chandra

    Hi,
    In FBN1  FI Consultant maintain the number range Cash sales billing (Number range between 0000900001-0000901000 . This Cash sales billing posted to account, other billings not posted to accountg. plz guide me.
    Thanks and regards
    chandra

  • Document number ranges changes

    Dear friends,
    While creating the document number ranges for current year, user wrongly changed the previous year number ranges, now it is giving new number ranges for new documents which are posted in previous year, how to reset the previous number ranges with out effecting the documents which are already posted.
    regards,

    Dear,
    It is the only way to insert a correct number rang to the current year, and change the document No which posted to previous year wrong  to the correct fiscal year. then correct the "current number" to the last one posted in previous year.
    But these corrections need necesary authorizations and ABAP knowledge.
    With Best Regards,
    Gladys xing

  • Document number ranging

    How to do document number ranging in B1.How to see full details of G/L document.

    Hi,
    Go to Administration > System Initialization > Document Numbering > Here you can define numbering range for default series.
    Can you explain what type of detail you want.
    Regards,
    /Siddiq

  • Document Number range restart

    Dear Experts,
    Our FY is from Jan-Dec. therefore, we will be starting New FY Jan 2010.
    Please help me and let me please know, whether to start a New FY with restarting FI document number range.
    I check in SPRO settings for most of the document number range interval ID the year against it, is mentioned as 9999.
    is it fine if i copy FY 9999 to FY 2010, i hope it will not overlap while posting any documents.
    please help me.

    Hi,
        The Year is always a TO-Year.
    What you should have done is either:-(While no one else in the system to avoid inconsistencies)
        a)  Create a new line with Year 2009 and the current values of 9999, then set 9999 to initial values.
             This way the numbering is reset to initial from 2010 onwards, and old year postings continue to use the non-initial range.
    or b) New Line 2009 like above, delete 9999 entry. Then before each year starts run the above mentioned copy year function.
             This way each year will start initial.
    Kind regards

  • Profit Center Wise document number ranges

    Dear friends
    At our client place ECC 6.0 is implemented. The org structure is : One Company Code and 6 profit centers.
    Now the requirement is document number ranges at profit center level and not at Company Code level.
    Can we assign the number ranges at profit center level?
    Thanks in advance.
    Regards
    Kiran A

    Hi
    If you have new GL and PCA active, it would be very difficult to have Document Types assigned at profit center level. The document types are assigned at company code level and not profit center. There would be many transactions which would have multiple profit centers. How would you seggregate them, even if you use different document types as suggested for various profit centers?? Morever, most of the posting in FI come from other modules and are posted by the system because of the transactions in other modules. So it is practically not feasible to have profit center wise document numbers.
    However, for Indian Scenario, you can have SD Tax Invoices for every plant, where billing is done. Secondly, SAP has delivered excise documents to be numbered differently for every excise registration.This is to meet the Indian Reporting requirements.
    Regards
    Sanil Bhandari

  • MIRO document Number range buffering problem

    Dear all,
    My MIRO document number is not following the sequence. if my first 5 numbers come in a sequence, then the next 5 numbers are not coming in between. Instead, the next 5 numbers are coming. It might be due to number range buffering problem. How to find the number range object  for  MIRO document number range?
    How to solve this?
    Please suggest.
    I will award full points.
    Thanks & Regards,
    AR

    Hii,
    You can search the Number Range object in T-Code: SNRO
    The Number Range object for Invoice document is RE_BELEG
    Go the Change Mode of the Number Range Object in SNRO, remove the No of Numbers of Buffers (by default it will be 10).
    This will resolve your issue.
    Regards,
    Kumar

  • Classic & EC -  PO & other purchasing documents number range

    Hi SRM Gurus,
    Can any one please explain me more precisely about number ranges in SRM & MM.
    For classical scenario, we will define number ranges for PO & other purchasing documents in SRM as internal number ranges and in MM as external number ranges.
    But in Classical scenario we will create POs (or other Purchasing Documents) in backend system. Suppose If it is to be replicated to SRM as per business need, then how system works. Because we defined in SRM PO number range as internal number range and in backend system as external number range.
    Again in Extended Classical scenario, for MRP materials PR or Reservation will be created in backend system with internal number range. But in Plan-Driven scenario they will be replicate to SRM. In this case how we have to choose number ranges.
    I am confused. I'll appreciate if any one explains me with step by step or with examples for Classic and Extended classical scenarios
    Points will rewarded
    Thanks,

    Hi,
    Please find my responses in bold below:
    For classical scenario, we will define number ranges for PO & other purchasing documents in SRM as internal number ranges and in MM as external number ranges.
    Sundeep: In Classic Scenario, you do not define number ranges for PO internally in SPRO. You would only define number ranges for shopping carts, Confirmation and Invoices if required. Please see description of classic and extended classic scenario below.
    External number ranges are defined for PR's and PO's in ECC in a classic scenario environment. (No Internal number range is defined in SRM for these documents in classic scenario and a shopping cart is a PR in SRM)
    So, basically in classic scenario, you create only a Shopping cart (Internal Number Range) and all follow on documents such as PR, PO etc are created as external number ranges in ECC, which are a result of a shopping cart from SRM having an internal number range locally.
    But in Classical scenario we will create POs (or other Purchasing Documents) in backend system. Suppose If it is to be replicated to SRM as per business need, then how system works. Because we defined in SRM PO number range as internal number range and in backend system as external number range.
    Sundeep: This scenario is not possible. In classic scenario you cannot replicate the PO back to the SRM system. Such a scenario is usually accomodated by an Extended Classic Scenario.
    Again in Extended Classical scenario, for MRP materials PR or Reservation will be created in backend system with internal number range. But in Plan-Driven scenario they will be replicate to SRM. In this case how we have to choose number ranges.
    Sundeep: In a Plan driven procurement the PR is created in SRM as a shopping cart with internal number range. (PR = Shopping cart in SRM). No reservations are created locally in SRM from a PDP. Reservation are only possible in a Classic scenario from SRM -> R/3.
    · The classic scenario
    The shopping cart is created and approved in SAP Enterprise Buyer. The remainder of the procurement process takes place in the backend ERP system(s) and all other follow-on documents, such the purchase order, goods receipt/service entry sheet and invoice, are located there. With SAP Supplier Self-Services, you have partial supplier involvement for the operational procurement business scenarios when buying materials. There is no support for services.
    · The extended classic scenario
    The shopping cart is created in SAP Enterprise Buyer. The purchase order and follow-on documents are also created there and then replicated to the backend system. The purchase order in SAP Enterprise Buyer is the leading purchase order and cannot be changed in the backend system. Goods receipts and invoices can be pre-entered in SAP Enterprise Buyer or entered directly in the backend system. With SAP Supplier Self-Services, you have partial supplier involvement for all your operational procurement scenarios. In these scenarios, you have supplier involvement for the purchase order and the purchase order response.
    Hope this info helps !!
    Pls assign points for usefull answers !!
    Sundeep
    Message was edited by:
            Sundeep Ravande

  • Budget / Planning document number range per CO area

    Hi,
    I am facing the Issue for the budget and planning document number range.
    We are having 3 co area's in one server. I want to seperate it out the the number range for the planning and budgeting documents specific to co area.
    Please advice to do the same.
    Also the same issue with Claims numbers. How to resolve this.
    regards,

    Hi Friend,
    we are also check the no. range consistency & their is no inconsitenacy. what happen in COBK that it update the co document number range in a sequence. but in NRIV table it skip hundred & take the above number range. it mean CO document number & Current Number status which differ in COBK & NRIV table. why it happen we coundnt understand?
    can we maintain co document number range yearly?
    Warm Regards,
    Dhananjay R.

  • External Document Number Range

    Dear Forum,
    We have an issue with the Document Number Range that has been defined in the system, according to which the document numbering is automatic. When the users post the entries for audit adjustments in the back date, the numbers jump, which becomes an audit issue. However, to resolve this the users want the externally controlled document number range, so that they have the option to chose the manual numbers. Another problem is that we are using the ledgers 0L as well as 1L, while   the entries are posted in the leading ledger 0L, the same get replicated in the non leading ledger 1L and we want the external document number range in the  non leading ledger 1L also.
    Your prompt help would be highly appreciated as to how can we resolve the same.
    Regards

    Hi Dianne,
    Your advice is quite helpful. I have one more confusion. The fiscal year for the leading ledger 0L is calender year and for the non leading ledger 1L is the year from April to March. Thus period 03 for 0L corresponds to period 12 of 1L. Therefore, to keep the 'external document numbers' same in 0L and 1L, would the following be corect way, say for year 2010 -
    0L Year 2010 (Calender Year Jan to Dec) - External Doc nos. From 01 to 1000
    1L Year 2009 (April'09 to Mar'10) - External Document nos. From 01 to 1000
    Thus if the audit adjustmnets are posted on 31 March, 2010 with document no with 001 in 0L, it would appear with same document no. 001 in 1L on 31 March, 2010. In ledger 0L it will be in period 3, but in ledger 1L it will be in period 12.
    Would really appreciate your help.
    Regards,

  • Controlling Document Number Ranges

    Hi Gurus,
    I am pretty new to the Controlling world, i am trying to copy document number ranges from one controlling group to another, but i am getting an error like elements dont match. If you can explain me exactly what is causing this error, that will be a great help.
    Regards,
    Mihir

    There are various Controlling related business transaction like
    RKP1 Planning primary costs
    RKP2 Planning activities   
    These are the 'elements'
    These elements are all grouped under groups called 'Planning' or 'Actual'.
    Compare the groups in a controlling area via t-code KANK for both CO areas. Match them first and then do the copy of number ranges.

  • Material Document Number Ranges

    Hello Friends,
      We have a business requirement to differentiate the material document number ranges.  In our process, we have intercompany and third party scenarios and the requirement is that system has to determine different number series for third party goods issue and intercompany goods issue.  Currently as per standard, system deriving the unique number series for intercompany and third party goods issue since th event type is WL.
    Kindly provide your inputs on how we can differentiate the number ranges.
    Thanks in advance
    Best Regards,
    Goutham

    Hi,
    You could try to make it through the transaction code following  the process as below:
    First u need to create seperate document type in OMR4 or OBF4, then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
    I hope this helps!
    Best Regards,
    Arminda Jack

Maybe you are looking for