How to copy document no between transactions

HI
   We have seen that, if we processed VA02 with a particular document and then goto VA03 immediately,
the document number will be copied to the VA03 automatically.
        Like that how can we set our own developed transactions.
   Pls help me out.
Thanks in advance
Regards
Rajaram

Can you guide me how to work with abap memeory.

Similar Messages

  • AR AUTOINVOICE ignores the checked box "copy document number to transaction

    dear ,
    AR AUTOINVOICE ignores the checked box "copy document number to transaction number"
    I setup the batch source as check "copy document number to transaction number" but when
    I import the invoice by auto invoice I found the transaction number is 2 and
    the document number is 1
    That mean the system ignore the check box in definition of batch "copy document number to transaction number"
    Facts: Navigate -> Setup -> Transactions -> Sources
    Setup Transaction Source with Automatic Transaction Numbering checked and Copy Document Sequence Number to
    Transaction Number checked.
    Navigate - > setup -> system option  tab (transaction & customer)
    Document number generation level: when completed
    Expected Behavior:
    The Expected Behavior is that when I checked the "copy document number to transaction number" in definition of the source
    AR Auto Invoicing must assign the document number to transaction number
    Business impacts :
    There is gaps with the sequence number for the invoice that not accepted from the finance auditor in the last of the year
    thanks

    check have u performed these steps or not.
    you have to do all the necesarry set up steps:
    1) Enable the Sequential Numbering Profile Option
    2) Enable the AR: Document Number Generation Level Profile Option
    3) Check Copy Document Number to Transaction Number box on Transaction Sources
    4) Define Sequences
    5) Assign Sequences to Categories
    In batch source definition for your invoice, there is a flag for 'copy doc num to trx num'. is it ticked?

  • How to copy documents for InfoProvider data from one cube to another cube

    Hello Everyone,
    We are using standard document feature to store document/comment about the data shown in the report/planning query. Relevant characteristics have the property 'characteristics is document attrib' turned on/selected for this purpose.
    Looks like the documents created gets tagged to a particular InfoProvider along with characteristic value assignment.
    Is there a way to move or copy documents from one InfoProvider to another InfoProvider.
    As per the design requirement, we need to move data from a real time InfoProvider (transaction cube) to a basic reporting cube. The data in the first/source cube stays for a period of approx 3 months before moved to other cube. We want the documents associated with InfoProvider data also to be moved, so that users can continue to see the document/comments what they  had created earlier.  
    I looked at the Documents tab in DataWarehouse workbench. No options seem to be available to copy or move documents.
    Any help will be highly appreciated and points will be rewarded accordingly!
    Best regards,
    Sanjeeb

    Hi
    Have you got any answer to this? I would also be interested in a copy function but more from one query ID to another.
    Kind regards,
    Daniel Müller

  • How to Attach Document in Z Transaction

    Hi Everyone,
    I want to add the supporting document(like NOC ,Excel sheet,scan copy of document, Auto Cad Drawing ) to my transaction. Just like we do in Sales Order Transaction. Same thing i want to incorporate in my Z Transaction.
    In Case of Sales Order we have document in Extras >> Documents.
    I checked all the related  forum but didn't got the clue.
    Warm Regards,
    Sandeep Patel

    Hi,
    Sorry if I'm reading your question wrong, but if you want a user to be able to store documents as a feature of your program, you may want to use Generic Object Serivces (GOS). 
    Here's a nice article on it:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e6b0d95-0a01-0010-4696-ca0a48de5fb3
    Cheers
    Alex

  • How to open documents attached to transaction in Portal?

    Hi Guys
    We have a CRM 5.0 Implementation and here is what we are using in Portal
    Title: Leads -Transaction
    Technical Name: com.sap.pct.crm.lea.leads
    Contents: This iView originates from the business package for CRM 5.0 and contains functionality CRMD_BUS2000108 supported by BSP Application crm_bsp_frame
    Title: Opportunities-Transaction
    Technical Name: com.sap.pct.crm.opp.opportunities_s
    Contents: This iView originates from the business package for CRM 5.0 and contains functionality CRMD_BUS2000111 supported by BSP Application crm_bsp_frame
    My question is -  How to open MS Word, MS Excel, Powerpoint documents attached to opportunity transaction in Portal? Can we use the Project share path in URL?

    Hello Tarang,
    Can you be little specific on what kind of documents are these?
    1. You can check if there are ways to integrate the same with KM...am not sure about CRM but yes, it can be done on BIW.
    2. If these are just config documents and not that user creates, then you may save these docs into a KM folder and create a KM Navigation link assigning to users.
    Warm Regards,
    Ritu

  • How to copy automation data between projects?

    I can copy regions from one project to another, but not automation data (e.g. volume curves). Why? How to work around this?
    Cheers,
    Conor

    In project one, open the Automation Event List for the region in question, select all, goto project two, do the same but use paste instead.
    Slightly awkward perhaps, but it works. It would have been easier if the automation would just follow the regions when you drag them between projects.
    Edit: the Automation Event List is only available as a KC, Ctrl + Cmd + E as default.
    /juhani
    Message was edited by: juhani h.

  • How to Copy documents (like Sales Order) from one Company/Database to another

    Hi everyone!
    I'm developing an AddOn for SAP 9.1 version.
    Part of this implementation is to import some data from a Sales Order Document from one Company to another (Document selected by "DocNum" by the user).
    So, my doubt is: after select data saved in arraylist, how I fill the document with that values saved in my arraylist ?
    I wish you could help me.
    Regards!
    Diogo Carvalho

    Hi Diogo,
    You can achieve this requirement and you will be required to get user credentials for your 'copy from' company to make a connection.
    After you make the connection with your 'copy from' company, you can provide a screen with a matrix which have the document numbers of the type of document you want.
    Create two documents of the type you want from each company. You can fill the document which created from current company while you reading from the document which created from 'copy from' company using get by key method.
    Most importantly, the master data of the two companies should be same. Otherwise, you will have errors in creating the document or document won't be identical.
    Hope this will helpful to you.
    Best Regards,
    J S L Geeganage

  • How to copy whole code of transaction FV60 and assign ZFV60

    Hi,
       I' am required to copy the whole programms of transaction FV60 into Z-programms and assign ZFV60 transaction for the copied programms. Can anyone explain how to acheive it.
    Thanks in Advance.
    Rajesh.

    Hi
    You can copy the program SAPMF05A related to the Tcode FV60
    But this program is a Module POOL and consists of some 112 screens related to this program.
    First find the related screens that are required to you and download them to desktop and reload them to Z program screens with carefully
    Reward points for useful Answers
    Regards
    Anji

  • How to Attach Documents to QM02 Transaction

    Hi,
    We have a requirement to implement a RFC(Portal to R/3) which is used to attach the documents at the Header level of the Quality Notification(QM02). The input paremeters are the file content and file format. File content will be in the form of Byte Array which is coming from the portal and file format can be Word, Excel or PDF.
    Please help me on this regard.
    Thanks,
    Sathi

    Hi Raja,
    Thanks for your reply, I excecuted this RFC by providing the input values as
    CLASSNAME 'BUS2078'
    CLASSTYPE 'BO'
    OBJECT_KEY '0000000306' ( Quality Notification Number )
    SIGNATURE:
      DOC_COUNT 00000001
      DOC_VER_NO 00000001
      COMP_COUNT 00000001
    COMPONENTS:
      DOC_COUNT 00000001
      COMP_COUNT 00000001 
    CONTENT:
      LINE 10101010111010111010101010111101011110011010101011100101110101011101011010101
    But there was no attachment added to that particular Notification.
    If this process is not correct. Please let me know how i should use this RFC to attach documents.
    Thanks in advance,
    Sathi

  • How to copy data from one transaction to the next (F-43)

    All,
    I have a situation where it appears the due date of an invoice is being copied from a previous invoice entry.   Can anyone tell me is there a process where the user can have data default from one invoice to the next and if so is the due date (planning date) one of those fields?  
    Thanks
    Sandra

    I understand how it is supposed to work.  However, I have production examples of that not happening and I'm trying to figure out how.   The only way I have been able to replicate the issue is when I manually enter the due date when entering the invoice the calculation of baseline date + #of days does not happen.   Users say they are not manually entering a date so I'm trying to find a way the date could be entered without the users knowledge.  
    Regards
    Sandra

  • How to "copy" Collections & Presets between existing catalogues?

    to make life a little easier, I set up a fresh catalogue for each Calendar year, but as persaonl styles / preferences have changed I have different presets  & collection types in doifferent catalogues.
    Is there a way to "copy" them between catalogues (or perhaps apply a "global standard" for these)?
    Thanks in advance
    Edward

    You can "copy" your presets from one catalog to the other by doing two things:
    (a) In Preferences > Presets Tab check "Store Presets with Catalog". This will write your presets into a folder within the catalog in question.
    (b) Unfortunately there seems to be a bug in LR to the effect that only the LR presets but not the user-created presets are copied over to the catalog. I found that LR will create the corresponding folders named "User Presets" but these folders are empty. So you have to find your user-created presets where LR stored them previously and copy the manually over into the corresponding folder in the catalog. Th manual copying has to be done in your OS; there's no provision to do it from within LR.
    WW

  • How to copy fields values between same class objects with filtering ?

    Hi I'm facing a problem.
    It started when thinking to the clone method for cloning objects.
    And developed into a problem when trying to making something more complicate that just cloning.
    Suppose you have two JPanels and one is a copy of the other suppose that u feed the copy to some methods for processing.
    These methods modify simple data (ints,Strings, CustomClasses) and swing components too.
    Now when I get the object back I want to copy all of the fields values to the original JPanel except for those who represent swing components or the like.
    I want to do this automatically by writing some few rows of code.
    How can I do this using reflection ?
    How can I filter the Fields objects that I get from jpanelInstance.getClass().getDeclaredFields(); ? Which metod should I use then to check if is a subclass of java.awt.Component ?
    I've read about many things on using reflection to invoke methods, constructors and so on.
    But how do I get the fields values as I get the fields objects ?
    Thanks for the attention, hope what is written is clear enough,
    Estades.

    Are you targeting a "worst design award"? What kind of "processing" would take place on a UI component?
    I am sure from what you write that you missed to seperate your model from your view. Read about MVC and retry designing your application.
    Edited by: stefan.schulz on Sep 15, 2007 7:30 PM

  • How to copy a value between items??

    Hi friends,
    [Apps R12]
    I don't exactly know ho to do this:
    Imagine you have a LOV.. and it retrieves a value in one of its attributes...
    When selecting a value of that LOV.. I want one of those attribute values... be copied to other item in the same screen...
    It would be te same as in Forms:
    When-validate the lov ...
    :block1.item2:=:block1.item1
    where item1 is one of the columns retrieved by the LOV and item2 is another field on the screen....
    Could any of you provide an example of how to do this?
    Thanks!!!

    if (pageContext.isLovEvent())
    // Form was submitted because the user selected
    // a value from the LOV modal window,
    // or because the user tabbed out of the LOV input.
    // Find out which LOV input triggered the event.
    String lovInputSourceId = pageContext.getParameter(SOURCE_PARAM);
    // Find out the result values of the LOV.
    Hashtable lovResults =
    pageContext.getLovResultsFromSession(lovInputSourceId);
    if (lovResults != null)
    // Update the page depending on the value chosen by the user.
    see if this helps....
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to copy table rows between two tables?

    Hi,
    We are using the advanced table to specify any kind of data in a structured way. Sometimes I like to move a row from the second table to a the first or reverse.
    Any time when I select a row the "paste" activity moves all the selected table fields into one single field in the target table. So it is not a row copy as I like to see it.
    How can I manage this better?
    Thanks
    Volker

    Volker,
    So WYSIWYG copying messes up the row? If you send me a screen shot of what happens (just to be clear what Advanced table means to you) I will raise a bug if I can reproduce it.
    I will report this back up the PM chain but as a workaround I would flip into WIKI markup mode and use the copy and paste in that mode. This will make sure the stuff ends up in the correct place.
    Phil

  • How to copy documents from SOLAR02 configuration structure into Solution

    Hi,
    in SOLOA02 we have stored our cross scenario configuration in the solution structure on top level node 'configuration' as described in the help 'Implementation and Upgrade Projects'->'projects'->'configuration'->'Edit cross scenario configuration'.
    During hand-over from project to support I want to copy the information stored under configuration into our solution directory (TC SOLUTION_DIRECTORY). In the solution structure there is no top level node 'configuration'. Only 'Org Unkits, Master Dtaa, Business Scenarios, Interface Scenarios, Systems, Servers.
    Can I customize the default solution structure and add the missing node? Is there another way to copy the documents?
    Best regards,
    Peter

    Hi Peter,
    the only way to relate the configuration structure from a project to a solution is via a maintenance project. You need to assign a maintenance project to your solution (on the solution settings tab). This will create a solution node in the maintenance project. You can now copy the configuration structure from your implementation project to the configuration structure underneath the solution node of the maintenance project.
    Best regards,
    Michael

Maybe you are looking for